diff --git a/charts/snapshotEngine/README.md b/charts/snapshotEngine/README.md
index e1a8981..bd22cd5 100755
--- a/charts/snapshotEngine/README.md
+++ b/charts/snapshotEngine/README.md
@@ -1,6 +1,6 @@
 # Snapshot Engine
 
-A Helm chart for creating Tezos snapshots and tarballs for faster node sync, all in kubernetes, and deploy them to a bucket with a static website.
+A Helm chart for creating Tezos snapshots and tarballs for faster node sync, all in Kubernetes, and deploy them to a bucket with a static website.
 
 Check out [xtz-shots.io](xtz-shots.io) for an example.
 
@@ -45,7 +45,7 @@ The Snapshot Engine is a Helm Chart to be deployed on a Kubernetes Cluster.  It
 
 ## How To
 
-1. Create an S3 Bucket.  
+1. Create an S3 Bucket.
 
   :warning: If you want to make it available over the internet, you will need to make it a [Public Bucket](https://aws.amazon.com/premiumsupport/knowledge-center/read-access-objects-s3-bucket/) and with the following Bucket Policy.
 
@@ -72,9 +72,9 @@ The Snapshot Engine is a Helm Chart to be deployed on a Kubernetes Cluster.  It
 
   Replace `<ARN_OF_S3_BUCKET>` with the ARN of your new S3 Bucket.
 
-  :warning: Pay close attention to the seemlingly redundant final `Resource` area. 
+  :warning: Pay close attention to the seemingly redundant final `Resource` area.
 
-  `/` and `/*` provide permission to the root and contents of the S3 Bucket respectively. 
+  `/` and `/*` provide permission to the root and contents of the S3 Bucket respectively.
 
   ```json
   {
@@ -225,7 +225,7 @@ We create only one snapshot at a time as having more than one in-progress slows
 
 ### Snapshot Scheduler Deployment
 
-A Kubernetes Deployment called the **Snapshot Scheduler** runs indefinitely triggering a new Kubernetes Job called **Snapshot Maker**.  
+A Kubernetes Deployment called the **Snapshot Scheduler** runs indefinitely triggering a new Kubernetes Job called **Snapshot Maker**.
 
 Snapshot Scheduler waits until the Snapshot Maker Job is gone to schedule a new job. This way there are snapshots constantly being created instead of running on a schedule.
 
diff --git a/charts/tezos/values.yaml b/charts/tezos/values.yaml
index f7347f9..ffaa665 100644
--- a/charts/tezos/values.yaml
+++ b/charts/tezos/values.yaml
@@ -316,7 +316,7 @@ serviceMonitor:
 # https://tezos.gitlab.io/user/key-management.html#signer
 octezSigners: {}
 # These signers use the octez-signer binary.
-# 
+#
 # Example:
 # ```
 # octezSigners:
@@ -429,9 +429,9 @@ dalNodes: {}
 
 # When spinning up nodes, tezos-k8s will attempt to download a snapshot from a
 # known source. This should be a url to a json metadata file in the format
-# xtz-shots uses. If you want to sync from scratch or for a private chain, set
-# to `null`.
-snapshot_source: https://snapshots.tezos.marigold.dev/api/tezos-snapshots.json
+# xtz-shots uses. If you want to use a specific snapshot, sync from scratch, or
+# create a private chain, set to `null`.
+snapshot_source: null
 
 # By default, tezos-k8s will download and unpack snapshots.
 # A tarball is a LZ4-compressed filesystem tar of a node's data directory.
@@ -450,10 +450,10 @@ prefer_tarballs: false
 # will be ignored for all artifact types.
 ## NOTE: `*_tarball_url` and `*_snapshot_url` are mutually exclusive
 ## and cannot both be specified at the same time.
-archive_tarball_url: null # e.g. https://mainnet.xtz-shots.io/archive-tarball
-full_snapshot_url: null
+archive_tarball_url: null
+full_snapshot_url: null # e.g. https://snapshots.eu.tzinit.org/mainnet/full
 full_tarball_url: null
-rolling_snapshot_url: null
+rolling_snapshot_url: null # e.g. https://snapshots.eu.tzinit.org/mainnet/rolling
 rolling_tarball_url: null
 
 # List of peers for nodes to connect to. Gets set under config.json `p2p` field
diff --git a/mkchain/tqchain/mkchain.py b/mkchain/tqchain/mkchain.py
index 4232358..c4b9761 100644
--- a/mkchain/tqchain/mkchain.py
+++ b/mkchain/tqchain/mkchain.py
@@ -165,7 +165,7 @@ def main():
         },
         "protocols": [
             {
-                "command": "Proxford",
+                "command": "PtParisB",
                 "vote": {"liquidity_baking_toggle_vote": "pass"},
             }
         ],
@@ -312,7 +312,7 @@ def main():
         parametersYaml = yaml.safe_load(yaml_file)
         activation = {
             "activation": {
-                "protocol_hash": "ProxfordYmVfjWnRcgjWH36fW6PArwqykTFzotUxRs6gmTcZDuH",
+                "protocol_hash": "PtParisBQscdCm6Cfow6ndeU6wKJyA3aV1j4D3gQBQMsTQyJCrz",
                 "protocol_parameters": parametersYaml,
             },
         }
diff --git a/test/charts/mainnet.expect.yaml b/test/charts/mainnet.expect.yaml
index 52bf01e..02b04a2 100644
--- a/test/charts/mainnet.expect.yaml
+++ b/test/charts/mainnet.expect.yaml
@@ -29,12 +29,12 @@ data:
     }
   FULL_SNAPSHOT_URL: ""
   FULL_TARBALL_URL: ""
-  ROLLING_SNAPSHOT_URL: ""
+  ROLLING_SNAPSHOT_URL: "https://snapshots.us.tzinit.org/mainnet/rolling"
   ROLLING_TARBALL_URL: ""
   ARCHIVE_TARBALL_URL: ""
   PREFER_TARBALLS: "false"
   SNAPSHOT_METADATA_NETWORK_NAME: ""
-  SNAPSHOT_SOURCE: "https://snapshots.tezos.marigold.dev/api/tezos-snapshots.json"
+  SNAPSHOT_SOURCE: ""
   OCTEZ_VERSION: "tezos/tezos:v19.0"
   NODE_GLOBALS: |
     {
@@ -135,7 +135,7 @@ spec:
         appType: octez-node
         node_class: rolling-node
     spec:
-      containers:        
+      containers:
         - name: octez-node
           image: "tezos/tezos:v19.0"
           imagePullPolicy: IfNotPresent
@@ -145,27 +145,27 @@ spec:
             - "-c"
             - |
               #!/bin/sh
-              
+
               set -xe
-              
+
               # ensure we can run octez-client commands without specifying client dir
               ln -s /var/tezos/client /home/tezos/.tezos-client
               #
               # Not every error is fatal on start.
               # So, we try a few times with increasing delays:
-              
+
               for d in 1 1 5 10 20 60 120; do
               	/usr/local/bin/octez-node run				\
               			--bootstrap-threshold 0			\
               			--config-file /etc/tezos/config.json
               	sleep $d
               done
-              
+
               #
               # Keep the container alive for troubleshooting on failures:
-              
+
               sleep 3600
-              
+
           envFrom:
           env:
             - name: DAEMON
@@ -185,7 +185,7 @@ spec:
           readinessProbe:
             httpGet:
               path: /is_synced
-              port: 31732                                
+              port: 31732
         - name: sidecar
           image: "ghcr.io/tacoinfra/tezos-k8s-utils:main"
           imagePullPolicy: IfNotPresent
@@ -194,7 +194,7 @@ spec:
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -218,8 +218,8 @@ spec:
             limits:
               memory: 100Mi
             requests:
-              memory: 80Mi        
-      initContainers:        
+              memory: 80Mi
+      initContainers:
         - name: config-init
           image: "tezos/tezos:v19.0"
           imagePullPolicy: IfNotPresent
@@ -229,10 +229,10 @@ spec:
             - "-c"
             - |
               set -e
-              
+
               echo "Writing custom configuration for public node"
               mkdir -p /etc/tezos/data
-              
+
               # if config already exists (container is rebooting), dump and delete it.
               if [ -e /etc/tezos/data/config.json ]; then
                 printf "Found pre-existing config.json:\n"
@@ -240,20 +240,20 @@ spec:
                 printf "Deleting\n"
                 rm -rvf /etc/tezos/data/config.json
               fi
-              
+
               /usr/local/bin/octez-node config init		\
                   --config-file /etc/tezos/data/config.json	\
                   --data-dir /etc/tezos/data			\
                   --network $CHAIN_NAME
-              
+
               cat /etc/tezos/data/config.json
-              
+
               printf "\n\n\n\n\n\n\n"
-              
+
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -272,7 +272,7 @@ spec:
             - mountPath: /etc/tezos
               name: config-volume
             - mountPath: /var/tezos
-              name: var-volume        
+              name: var-volume
         - name: config-generator
           image: "ghcr.io/tacoinfra/tezos-k8s-utils:main"
           imagePullPolicy: IfNotPresent
@@ -281,7 +281,7 @@ spec:
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -302,7 +302,7 @@ spec:
             - mountPath: /var/tezos
               name: var-volume
             - mountPath: /etc/secret-volume
-              name: tezos-accounts        
+              name: tezos-accounts
         - name: snapshot-downloader
           image: "ghcr.io/tacoinfra/tezos-k8s-utils:main"
           imagePullPolicy: IfNotPresent
@@ -311,7 +311,7 @@ spec:
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -330,7 +330,7 @@ spec:
             - mountPath: /etc/tezos
               name: config-volume
             - mountPath: /var/tezos
-              name: var-volume        
+              name: var-volume
         - name: snapshot-importer
           image: "tezos/tezos:v19.0"
           imagePullPolicy: IfNotPresent
@@ -340,41 +340,41 @@ spec:
             - "-c"
             - |
               set -e
-              
+
               bin_dir="/usr/local/bin"
               data_dir="/var/tezos"
               node_dir="$data_dir/node"
               node_data_dir="$node_dir/data"
               node="$bin_dir/octez-node"
               snapshot_file=${node_dir}/chain.snapshot
-              
+
               if [ ! -f ${snapshot_file} ]; then
                   echo "No snapshot to import."
                   exit 0
               fi
-              
+
               if [ -e ${node_data_dir}/context/store.dict ]; then
                   echo "Blockchain has already been imported. If a tarball"
                   echo "instead of a regular tezos snapshot was used, it was"
                   echo "imported in the snapshot-downloader container."
                   exit 0
               fi
-              
+
               cp -v /etc/tezos/config.json ${node_data_dir}
-              
+
               if [ -f ${node_dir}/chain.snapshot.block_hash ]; then
                   block_hash_arg="--block $(cat ${node_dir}/chain.snapshot.block_hash)"
               fi
-              
+
               ${node} snapshot import ${snapshot_file} --data-dir ${node_data_dir} --no-check
               find ${node_dir}
-              
+
               rm -rvf ${snapshot_file}
-              
+
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -393,7 +393,7 @@ spec:
             - mountPath: /etc/tezos
               name: config-volume
             - mountPath: /var/tezos
-              name: var-volume                
+              name: var-volume
         - name: upgrade-storage
           image: "tezos/tezos:v19.0"
           imagePullPolicy: IfNotPresent
@@ -403,14 +403,14 @@ spec:
             - "-c"
             - |
               set -ex
-              
+
               if [ ! -e /var/tezos/node/data/context/store.dict ]
               then
                 printf "No store in data dir found, probably initial start, doing nothing."
                 exit 0
               fi
               octez-node upgrade storage --config /etc/tezos/config.json
-              
+
           envFrom:
           env:
             - name: DAEMON
@@ -421,7 +421,7 @@ spec:
             - mountPath: /var/tezos
               name: var-volume
       securityContext:
-        fsGroup: 1000      
+        fsGroup: 1000
       volumes:
         - emptyDir: {}
           name: config-volume
diff --git a/test/charts/mainnet2.expect.yaml b/test/charts/mainnet2.expect.yaml
index d8ae7fe..341f9bd 100644
--- a/test/charts/mainnet2.expect.yaml
+++ b/test/charts/mainnet2.expect.yaml
@@ -29,12 +29,12 @@ data:
     }
   FULL_SNAPSHOT_URL: ""
   FULL_TARBALL_URL: ""
-  ROLLING_SNAPSHOT_URL: ""
+  ROLLING_SNAPSHOT_URL: "https://snapshots.us.tzinit.org/mainnet/rolling"
   ROLLING_TARBALL_URL: ""
   ARCHIVE_TARBALL_URL: ""
   PREFER_TARBALLS: "false"
   SNAPSHOT_METADATA_NETWORK_NAME: ""
-  SNAPSHOT_SOURCE: "https://snapshots.tezos.marigold.dev/api/tezos-snapshots.json"
+  SNAPSHOT_SOURCE: ""
   OCTEZ_VERSION: "tezos/tezos:v19.0"
   NODE_GLOBALS: |
     {
@@ -202,7 +202,7 @@ spec:
         appType: octez-node
         node_class: city-block
     spec:
-      containers:        
+      containers:
         - name: octez-node
           image: "tezos/tezos:v19.0"
           imagePullPolicy: IfNotPresent
@@ -212,27 +212,27 @@ spec:
             - "-c"
             - |
               #!/bin/sh
-              
+
               set -xe
-              
+
               # ensure we can run octez-client commands without specifying client dir
               ln -s /var/tezos/client /home/tezos/.tezos-client
               #
               # Not every error is fatal on start.
               # So, we try a few times with increasing delays:
-              
+
               for d in 1 1 5 10 20 60 120; do
               	/usr/local/bin/octez-node run				\
               			--bootstrap-threshold 0			\
               			--config-file /etc/tezos/config.json
               	sleep $d
               done
-              
+
               #
               # Keep the container alive for troubleshooting on failures:
-              
+
               sleep 3600
-              
+
           envFrom:
           env:
             - name: DAEMON
@@ -256,7 +256,7 @@ spec:
           readinessProbe:
             httpGet:
               path: /is_synced
-              port: 31732                        
+              port: 31732
         - name: logger
           image: "ghcr.io/tacoinfra/tezos-k8s-utils:main"
           imagePullPolicy: IfNotPresent
@@ -265,7 +265,7 @@ spec:
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -286,7 +286,7 @@ spec:
             - mountPath: /etc/tezos
               name: config-volume
             - mountPath: /var/tezos
-              name: var-volume        
+              name: var-volume
         - name: sidecar
           image: "ghcr.io/tacoinfra/tezos-k8s-utils:main"
           imagePullPolicy: IfNotPresent
@@ -295,7 +295,7 @@ spec:
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -321,8 +321,8 @@ spec:
             limits:
               memory: 100Mi
             requests:
-              memory: 80Mi        
-      initContainers:        
+              memory: 80Mi
+      initContainers:
         - name: config-init
           image: "tezos/tezos:v19.0"
           imagePullPolicy: IfNotPresent
@@ -332,10 +332,10 @@ spec:
             - "-c"
             - |
               set -e
-              
+
               echo "Writing custom configuration for public node"
               mkdir -p /etc/tezos/data
-              
+
               # if config already exists (container is rebooting), dump and delete it.
               if [ -e /etc/tezos/data/config.json ]; then
                 printf "Found pre-existing config.json:\n"
@@ -343,20 +343,20 @@ spec:
                 printf "Deleting\n"
                 rm -rvf /etc/tezos/data/config.json
               fi
-              
+
               /usr/local/bin/octez-node config init		\
                   --config-file /etc/tezos/data/config.json	\
                   --data-dir /etc/tezos/data			\
                   --network $CHAIN_NAME
-              
+
               cat /etc/tezos/data/config.json
-              
+
               printf "\n\n\n\n\n\n\n"
-              
+
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -377,7 +377,7 @@ spec:
             - mountPath: /etc/tezos
               name: config-volume
             - mountPath: /var/tezos
-              name: var-volume        
+              name: var-volume
         - name: config-generator
           image: "ghcr.io/tacoinfra/tezos-k8s-utils:main"
           imagePullPolicy: IfNotPresent
@@ -386,7 +386,7 @@ spec:
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -409,7 +409,7 @@ spec:
             - mountPath: /var/tezos
               name: var-volume
             - mountPath: /etc/secret-volume
-              name: tezos-accounts        
+              name: tezos-accounts
         - name: snapshot-downloader
           image: "ghcr.io/tacoinfra/tezos-k8s-utils:main"
           imagePullPolicy: IfNotPresent
@@ -418,7 +418,7 @@ spec:
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -439,7 +439,7 @@ spec:
             - mountPath: /etc/tezos
               name: config-volume
             - mountPath: /var/tezos
-              name: var-volume        
+              name: var-volume
         - name: snapshot-importer
           image: "tezos/tezos:v19.0"
           imagePullPolicy: IfNotPresent
@@ -449,41 +449,41 @@ spec:
             - "-c"
             - |
               set -e
-              
+
               bin_dir="/usr/local/bin"
               data_dir="/var/tezos"
               node_dir="$data_dir/node"
               node_data_dir="$node_dir/data"
               node="$bin_dir/octez-node"
               snapshot_file=${node_dir}/chain.snapshot
-              
+
               if [ ! -f ${snapshot_file} ]; then
                   echo "No snapshot to import."
                   exit 0
               fi
-              
+
               if [ -e ${node_data_dir}/context/store.dict ]; then
                   echo "Blockchain has already been imported. If a tarball"
                   echo "instead of a regular tezos snapshot was used, it was"
                   echo "imported in the snapshot-downloader container."
                   exit 0
               fi
-              
+
               cp -v /etc/tezos/config.json ${node_data_dir}
-              
+
               if [ -f ${node_dir}/chain.snapshot.block_hash ]; then
                   block_hash_arg="--block $(cat ${node_dir}/chain.snapshot.block_hash)"
               fi
-              
+
               ${node} snapshot import ${snapshot_file} --data-dir ${node_data_dir} --no-check
               find ${node_dir}
-              
+
               rm -rvf ${snapshot_file}
-              
+
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -504,7 +504,7 @@ spec:
             - mountPath: /etc/tezos
               name: config-volume
             - mountPath: /var/tezos
-              name: var-volume                
+              name: var-volume
         - name: upgrade-storage
           image: "tezos/tezos:v19.0"
           imagePullPolicy: IfNotPresent
@@ -514,14 +514,14 @@ spec:
             - "-c"
             - |
               set -ex
-              
+
               if [ ! -e /var/tezos/node/data/context/store.dict ]
               then
                 printf "No store in data dir found, probably initial start, doing nothing."
                 exit 0
               fi
               octez-node upgrade storage --config /etc/tezos/config.json
-              
+
           envFrom:
           env:
             - name: DAEMON
@@ -534,7 +534,7 @@ spec:
             - mountPath: /var/tezos
               name: var-volume
       securityContext:
-        fsGroup: 1000      
+        fsGroup: 1000
       volumes:
         - emptyDir: {}
           name: config-volume
@@ -571,7 +571,7 @@ spec:
         appType: octez-node
         node_class: country-town
     spec:
-      containers:        
+      containers:
         - name: octez-node
           image: "tezos/tezos:v15-release"
           imagePullPolicy: IfNotPresent
@@ -581,27 +581,27 @@ spec:
             - "-c"
             - |
               #!/bin/sh
-              
+
               set -xe
-              
+
               # ensure we can run octez-client commands without specifying client dir
               ln -s /var/tezos/client /home/tezos/.tezos-client
               #
               # Not every error is fatal on start.
               # So, we try a few times with increasing delays:
-              
+
               for d in 1 1 5 10 20 60 120; do
               	/usr/local/bin/octez-node run				\
               			--bootstrap-threshold 0			\
               			--config-file /etc/tezos/config.json
               	sleep $d
               done
-              
+
               #
               # Keep the container alive for troubleshooting on failures:
-              
+
               sleep 3600
-              
+
           envFrom:
           env:
             - name: DAEMON
@@ -630,7 +630,7 @@ spec:
             limits:
               memory: 16192Mi
             requests:
-              memory: 16192Mi                        
+              memory: 16192Mi
         - name: logger
           image: "ghcr.io/tacoinfra/tezos-k8s-utils:main"
           imagePullPolicy: IfNotPresent
@@ -639,7 +639,7 @@ spec:
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -660,7 +660,7 @@ spec:
             - mountPath: /etc/tezos
               name: config-volume
             - mountPath: /var/tezos
-              name: var-volume        
+              name: var-volume
         - name: sidecar
           image: "ghcr.io/tacoinfra/tezos-k8s-utils:main"
           imagePullPolicy: IfNotPresent
@@ -669,7 +669,7 @@ spec:
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -695,8 +695,8 @@ spec:
             limits:
               memory: 100Mi
             requests:
-              memory: 80Mi        
-      initContainers:        
+              memory: 80Mi
+      initContainers:
         - name: config-init
           image: "tezos/tezos:v15-release"
           imagePullPolicy: IfNotPresent
@@ -706,10 +706,10 @@ spec:
             - "-c"
             - |
               set -e
-              
+
               echo "Writing custom configuration for public node"
               mkdir -p /etc/tezos/data
-              
+
               # if config already exists (container is rebooting), dump and delete it.
               if [ -e /etc/tezos/data/config.json ]; then
                 printf "Found pre-existing config.json:\n"
@@ -717,20 +717,20 @@ spec:
                 printf "Deleting\n"
                 rm -rvf /etc/tezos/data/config.json
               fi
-              
+
               /usr/local/bin/octez-node config init		\
                   --config-file /etc/tezos/data/config.json	\
                   --data-dir /etc/tezos/data			\
                   --network $CHAIN_NAME
-              
+
               cat /etc/tezos/data/config.json
-              
+
               printf "\n\n\n\n\n\n\n"
-              
+
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -751,7 +751,7 @@ spec:
             - mountPath: /etc/tezos
               name: config-volume
             - mountPath: /var/tezos
-              name: var-volume        
+              name: var-volume
         - name: config-generator
           image: "ghcr.io/tacoinfra/tezos-k8s-utils:main"
           imagePullPolicy: IfNotPresent
@@ -760,7 +760,7 @@ spec:
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -783,7 +783,7 @@ spec:
             - mountPath: /var/tezos
               name: var-volume
             - mountPath: /etc/secret-volume
-              name: tezos-accounts        
+              name: tezos-accounts
         - name: snapshot-downloader
           image: "ghcr.io/tacoinfra/tezos-k8s-utils:main"
           imagePullPolicy: IfNotPresent
@@ -792,7 +792,7 @@ spec:
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -813,7 +813,7 @@ spec:
             - mountPath: /etc/tezos
               name: config-volume
             - mountPath: /var/tezos
-              name: var-volume        
+              name: var-volume
         - name: snapshot-importer
           image: "tezos/tezos:v15-release"
           imagePullPolicy: IfNotPresent
@@ -823,41 +823,41 @@ spec:
             - "-c"
             - |
               set -e
-              
+
               bin_dir="/usr/local/bin"
               data_dir="/var/tezos"
               node_dir="$data_dir/node"
               node_data_dir="$node_dir/data"
               node="$bin_dir/octez-node"
               snapshot_file=${node_dir}/chain.snapshot
-              
+
               if [ ! -f ${snapshot_file} ]; then
                   echo "No snapshot to import."
                   exit 0
               fi
-              
+
               if [ -e ${node_data_dir}/context/store.dict ]; then
                   echo "Blockchain has already been imported. If a tarball"
                   echo "instead of a regular tezos snapshot was used, it was"
                   echo "imported in the snapshot-downloader container."
                   exit 0
               fi
-              
+
               cp -v /etc/tezos/config.json ${node_data_dir}
-              
+
               if [ -f ${node_dir}/chain.snapshot.block_hash ]; then
                   block_hash_arg="--block $(cat ${node_dir}/chain.snapshot.block_hash)"
               fi
-              
+
               ${node} snapshot import ${snapshot_file} --data-dir ${node_data_dir} --no-check
               find ${node_dir}
-              
+
               rm -rvf ${snapshot_file}
-              
+
           envFrom:
             - configMapRef:
                 name: tezos-config
-          env:    
+          env:
             - name: MY_POD_IP
               valueFrom:
                 fieldRef:
@@ -878,7 +878,7 @@ spec:
             - mountPath: /etc/tezos
               name: config-volume
             - mountPath: /var/tezos
-              name: var-volume                
+              name: var-volume
         - name: upgrade-storage
           image: "tezos/tezos:v15-release"
           imagePullPolicy: IfNotPresent
@@ -888,14 +888,14 @@ spec:
             - "-c"
             - |
               set -ex
-              
+
               if [ ! -e /var/tezos/node/data/context/store.dict ]
               then
                 printf "No store in data dir found, probably initial start, doing nothing."
                 exit 0
               fi
               octez-node upgrade storage --config /etc/tezos/config.json
-              
+
           envFrom:
           env:
             - name: DAEMON
@@ -908,7 +908,7 @@ spec:
             - mountPath: /var/tezos
               name: var-volume
       securityContext:
-        fsGroup: 1000      
+        fsGroup: 1000
       volumes:
         - emptyDir: {}
           name: config-volume