Can't find devices after install of SoftEther VPN server

[olofbokedal]

I've got a Raspberry Pi where I installed airsonos easily using #212. Everything worked as it should until I installed a VPN server on my Raspberry. Now, airsonos gets stuck on "Searching for Sonos devices on network..."

I narrowed it down to the network interfaces, and although I'm not entirely comfortable with virtual interfaces and advanced networking in general, I believe that the problem is the bridge which is used by the VPN server.

I followed the gist at https://gist.github.com/jhenkens/11190151 when installing the VPN server. The interesting part is the /etc/network/interfaces file, which is setup as:

auto lo

iface lo inet loopback

auto br0
iface br0 inet dhcp
    bridge_ports eth0
    bridge_stp off
    bridge_waitport 0
    bridge_maxwait 0
    bridge_fd 0
    post-up ip link set br0 address <SAME-ADDRESS-AS-ETH0>

allow-hotplug eth0
iface eth0 inet manual

Perhaps someone could see the problem right away? I've tried to hardcode the IP of my Sonos device based on #79, but with no luck.

[stephen]

Potentially fixed by #260? (available in 0.2.6)

[olofbokedal]

It sounded like a perfect match, but unfortunately the results are still the same :(

I'm sorry that I'm not able to provide any more details. Please feel free to instruct me in anyway if you'd like a log, verbose output, or any other debug info.