You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
(3f.) Will only run the code for “helloworld.py”, although the LCD image orientation is misaligned, upside down; the picture is smaller than the LCD screen; but image has mostly clear resolution without any noticeable lag, latency, delay.
(3g.) Receiving “ImportError: cannot import name MIC_ARRAY”
when attempting to run the code for:
1 Nov 2023
MAixPy IDE, board Maix Bit (with Mic) Sipeed R6+1 Microphone Array Module
Please help. The same error: "ImportError: cannot import name MIC_ARRAY"
Where module MIC_ARRAY is located?
Thanks!
Solved.
Flash board with "maixpy_v0.6.2_85_g23d09fbcc_with_lvgl.bin" file.
su09-17-2023
ImportError: cannot import name MIC_ARRAY
MAix Amigo
(1.) Hi, there.
(2.) Using MAixPy IDE, receiving error code for MAix Amigo:
ImportError: cannot import name MIC_ARRAY
(3.) MAix AMIGO
(3a.) SP-MOD MicArray Module
(3b.) Connector: 10P 0.5mm FPC
(3c.) Sipeed MAix R6 + 1 Microphone Array Board
(3d.) Located inside the back of the developer board #2970, moved the switch to M1N instead of STM.
(3e.) MAixPy IDE: Tools > Select Board > Sipeed Maixduino
(3f.) Will only run the code for “helloworld.py”, although the LCD image orientation is misaligned, upside down; the picture is smaller than the LCD screen; but image has mostly clear resolution without any noticeable lag, latency, delay.
(3g.) Receiving “ImportError: cannot import name MIC_ARRAY”
when attempting to run the code for:
ROUTINE Sound Source Localization
https://wiki.sipeed.com/soft/maixpy/en/develop_kit_board/module_microphone.html
andalsofor
AirPocket Soundman’s Sound Localizer
https://github.com/airpocket-soundman/SoundVisualizer/blob/main/src/mic_array_en_ver204.py
(3h.) Pin assignments used for MAix AMIGO
LED_CLK_GPIOHS28…….23
LED_DAT_GPIOHS27…….20
DAT 0…………….......……12
DAT 1……………..…..…….…9
DAT 2………………..…...……31
DAT 3………….……..……...7
WS……………..…....…..……19
BCK_SCK……...…..…………17
(4.) Would you list the correct pin assignments for the:
(4a.) MAix Amigo #2970 in the M1n position
(4b.) MAix Amigo #2970 in the STM position
(5.) Thanks.
(6.) Toodles!
The text was updated successfully, but these errors were encountered: