You can support additional router devices jdc ax1800 and jdc ax6600

[Doanduy09]

Can you please support more router devices jdc ax1800 and jdc ax6600, thanks

[wuruxu]

I also use jdc ax6600 too

[qosmio]

I mainly add NSS support for existing devices in upstream OpenWrt. The only exception is the MX4300, which isn’t upstream yet; I currently own this device and can personally verify that everything works with each update I push.

Are there branches that support these devices? Minus NSS of course.

[wuruxu]

NSS support is very great , these two devices isn't supported in upstream openwrt yet.

[Doanduy09]

Tôi chủ yếu thêm hỗ trợ NSS cho các thiết bị hiện có trong OpenWrt thượng nguồn. Ngoại lệ duy nhất là MX4300, hiện vẫn chưa được thượng nguồn; hiện tại tôi sở hữu thiết bị này và có thể tự mình xác minh rằng mọi thứ đều hoạt động với mỗi bản cập nhật tôi đưa ra.

Có nhánh nào hỗ trợ các thiết bị này không? Tất nhiên là trừ NSS.

Currently I see this branch supports jdc ax 1800 and jdc ax6600, but when I build the rom to test, I see that it doesn't support wifi very well.
https://github.com/LiBwrt-op/openwrt-6.x
https://github.com/LiBwrt-op/openwrt-6.x/tree/main/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom

[breeze303]

You can try the firmware here，Both devices have been using this firmware for close to half a year now, and there are no major problems with it so far
https://github.com/breeze303/openwrt-ci/releases/tag/IPQ60XX-ALL

[Doanduy09]

You can try the firmware here，Both devices have been using this firmware for close to half a year now, and there are no major problems with it so far https://github.com/breeze303/openwrt-ci/releases/tag/IPQ60XX-ALL

thank you very much

[Doanduy09]

I built https://github.com/LiBwrt-op/openwrt-6.x compare https://github.com/VIKINGYFY/immortalwrt , same position then see that jdc AX6600 of LiBwrt is slower than VIKINGYFY, I tried many times.. the result is still the same.