PLC Reboot

[Tifoso1979]

Dear Community,

I search a command to reboot/restart a PLC device detected in the network.

How I can do it? this way ist not working. :-(
-> plctool -i eth1 -R B8:BE:F4:71:82:19

test@admintestlinux:~$ plcstat -t -i eth1
P/L NET TEI ------ MAC ------ ------ BDA ------ TX RX CHIPSET FIRMWARE
LOC STA 002 B8:BE:F4:71:82:19 1C:1A:DF:F8:6A:B1 n/a n/a QCA7500 MAC-QCA7550-2.13.0.30-01-20221117-CS
REM CCO 001 B8:BE:F4:76:BE:C3 B8:BE:F4:76:BE:C2 629 577 QCA7500 MAC-QCA7550-2.8.0.30-01-20190705-CS
REM STA 003 60:15:92:43:60:6E 60:15:92:40:70:01 009 009 QCA7005 MAC-QCA7005-1.2.5.3207-00-20180927-CS
REM STA 004 BC:F2:AF:F3:42:45 FF:FF:FF:FF:FF:FF 009 009 QCA7000 MAC-QCA7000-1.1.0.727-02-20130826-FINAL
REM STA 005 B8:BE:F4:B1:8B:6C 00:1E:42:29:30:EF 009 009 QCA7500 MAC-QCA7550-2.8.0.30-01-20190705-CS
REM STA 006 BC:F2:AF:F1:E2:5E 8C:DC:D4:D4:39:19 009 009 QCA7000 MAC-QCA7000-1.1.0.727-02-20130826-FINAL

BR; Tifoso

[vbudko]

Hello Tifoso,

It is a safety related operation (to reboot/access a "remote" chip), thus you have to know and provide DAK using -D key.

BR Vasily