Skip to content

Latest commit

 

History

History
40 lines (30 loc) · 2.39 KB

Unifi_NVR.md

File metadata and controls

40 lines (30 loc) · 2.39 KB
Raw

Ubiquiti UniFi Video NVR for Samsung SmartThings

This is a SmartApp and device handler that will discover cameras from your NVR and create child devices for each camera.

Current capabilities of the camera device handler:

  • Implements motion sensor (if the camera is set to record on motion)
  • Implements image capture for single image display within details screen
  • Displays connection state in details screen
  • Configurable to take a snapshot when motion is detected

Installation

  1. Log into the IDE (http://graph.api.smartthings.com) and create a SmartApp and Device Handler from the code in this respository. For a tutorial on the IDE, see http://docs.smartthings.com/en/latest/tools-and-ide/editor-and-simulator.html
  2. Publish the SmartApp and device handler to yourself (http://docs.smartthings.com/en/latest/publishing/index.html)
  3. To use the app, you must have an active API key and a user with proper permissions.
  • In the NVR software click on "Users", select a user then select "API Access".
  • Make sure that "Allow API Usage" is enabled.
  • Generate an API key (if there isn't one already).
  1. Install the UniFi NVR SmartApp from your mobile device by going to "Automations", "Add a SmartApp" and finally "My Apps", where it should be visible.
  • Enter your NVR IP address.
  • Keep port to 7080 (this is the default HTTP port. Do not use 7443.).
  • Enter the username and password for the user from step 3.
  • Tap "Done"
  1. Camera devices should start to appear in your device list ("My Home" -> "Things")

Application Notes

The NVR software will use port 7080 for HTTP transactions out of the box. Please ensure that your hub and NVR are on a trusted network. Do not use port 7443 as SmartThings does not currently support HTTPS for hub actions on the LAN.

The API for the NVR is not published by Ubiquiti so this integration is subject to break, however unlikely.

Your SmartThings hub running this SmartApp must be on the same subnet as the NVR software. This is a restriction of the hub that it will not perform HTTP transactions outside the subnet.

Known Compatibility

NVR v3.1.5 running on Windows 8 with airCam Dome

NVR v3.4.0 running on Ubuntu 16 with UVC G3 and UVC Dome

NVR v3.5.2 running on a hardware NVR with UVC G3 Dome

Known Issues

For a list of known issues, please see the issues page