-
Notifications
You must be signed in to change notification settings - Fork 9
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Roller blind repeatedly no longer accessible #46
Comments
yeah, i'm seeing same behaviour |
Seems when I restart HA states are updated ( reboot automation KLF) , when I close or open the sun covers, the state is only updated once... Not anymore afterwards, when I reboot HA again, the state is updated ,but only for a short time... Didn't touch those since last summer, so not sure when this issue is started |
If you reload the extension, the states are also updated again for a short period of time. |
Indeed... |
Can you try to change the requirements entry in the Manifest.json file as following in order to test a modified pyvlx, after the modification you need to reboot HA to load the modified pyvlx branch: |
Ok, will test tomorrow |
I have now tested it. Unfortunately, the roller blinds can no longer be controlled. Error messages appear.
|
i'm seeing error below, also states are not reporting anymore
|
I updated to official pyvlx , 0.2.23 ; and i dont have the issue anymore
I also read in rls notes, that it reboots now automaticly on disconnect, so i disabled my automation... am i not right, that pyvllx 0.2.23 should restart klf auto? |
Sorry, forgot about another topic I was working on the same branch (I should no that, sorry) .. but should be fixed now. So if you could adjust your manifest to: |
the error is indeed gone, but the states are not reported correctly
|
for my velux itself, the state reporting is very slow, thye are still reporing "opening", when they are already open? i tought this behaviour was faster before? they are called velux_links and velux_rechts
|
Please check the pre-release of my_velux version 2.9.11 if this solves this topics. |
thats already a great improvement indeed, now i can control them again! |
Please generate logs |
ok, only on pyvlx? or also debug on your custom ? |
Pyvlx should be enough
Gesendet von Outlook für Android<https://aka.ms/AAb9ysg>
…________________________________
From: Pergola Fabio ***@***.***>
Sent: Wednesday, May 15, 2024 1:29:26 PM
To: pawlizio/my_velux ***@***.***>
Cc: Paul Daumlechner ***@***.***>; Comment ***@***.***>
Subject: Re: [pawlizio/my_velux] Roller blind repeatedly no longer accessible (Issue #46)
ok, only on pyvlx? or also debug on your custom ?
—
Reply to this email directly, view it on GitHub<#46 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ADS6GHXEEQJXFTSBFWMBDGTZCNBJNAVCNFSM6AAAAABHHTBMNGVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMJSGI4DANZYG4>.
You are receiving this because you commented.Message ID: ***@***.***>
|
ok, will do that later when i'm home |
Hey, here are the logs, i was closing all blinds and covers , you can see in history the flckering of the states ... opened .. closed ... opened ... closed and so on, you can compare with timestamps...
|
Ah, I maybe know the reason, I see mostly the behaviour when I use a scene... I press the open scene, and first it opens the blinds... The cover waits for the blind untill they are fully open, then the cover starts opening.... |
I indeed don't see the flick behaviour when I just open/close the cover as single device... |
Maybe an easy fix to include that : WAIT_FOR_POWER in the Elif statement? |
Not sure, probably also removal of the remaining_time condition clips solve this. |
I created a pyvlx branch called "fix_state_toggling" where I remove the remaining_time condition. To do so, please activate pyvlx debugging within your configuration.yaml additionally please change the requirements entry in your manifest.json file located in the HA directory Then restart your HA. After restart in your logs you should find something like: If this is the case, you should test your scenes if this still cause any issues. |
..by the way, I do not see yet any changes if I move my blinds.. however I also do not use any native KLF scenes |
Ok, will test next week, is this branch also updated with the other 2 fixes from today? |
Yes |
its looking indeed better, see a log of a full scene close
|
However, what i notice, if a cover is open, and i close them, i see the current possition going from 100 to zero, them somewhere, at 73 current position it stops, and HA thinks its open, then a few seconds later, its 0 and then its closed, thats not correct tested with cover.velux_links you can see its closing, then "opened" and then "closed" :-)
|
Ah, will the requirement download/install again if already installed? |
Recently, all roller blinds have become inaccessible relatively quickly.
After "Reload":
but only for a short time :-(
2024-05-05 12:06:50.602 WARNING (MainThread) [pyvlx] KLF 200 reboot initiated, but gateway is not connected 2024-05-05 12:06:50.602 DEBUG (MainThread) [pyvlx] Connecting to KLF 200 2024-05-05 12:06:55.311 DEBUG (MainThread) [pyvlx] Amount of connections since last HA start: 3 2024-05-05 12:06:55.316 DEBUG (MainThread) [pyvlx] SEND: <FramePasswordEnterRequest password="9C****"/> 2024-05-05 12:06:55.321 DEBUG (MainThread) [pyvlx] REC: <FramePasswordEnterConfirmation status="PasswordEnterConfirmationStatus.SUCCESSFUL"/> 2024-05-05 12:06:55.322 DEBUG (MainThread) [pyvlx] SEND: <FrameGetVersionRequest/> 2024-05-05 12:06:55.326 DEBUG (MainThread) [pyvlx] REC: <FrameGetVersionConfirmation software_version="0.2.0.0.71.0" hardware_version="6" product="KLF 200"/> 2024-05-05 12:06:55.327 DEBUG (MainThread) [pyvlx] SEND: <FrameGetProtocolVersionRequest/> 2024-05-05 12:06:55.531 DEBUG (MainThread) [pyvlx] REC: <FrameGetProtocolVersionConfirmation version="3.14"/> 2024-05-05 12:06:55.532 DEBUG (MainThread) [pyvlx] Connected to: <DtoVersion softwareversion="0.2.0.0.71.0" hardwareversion="6" productgroup="14" producttype="3"/>, <DtoProtocolVersion majorversion="3" minorversion="14"/> 2024-05-05 12:06:55.532 DEBUG (MainThread) [pyvlx] SEND: <FrameHouseStatusMonitorDisableRequest/> 2024-05-05 12:06:55.996 DEBUG (MainThread) [pyvlx] REC: <FrameHouseStatusMonitorDisableConfirmation/> 2024-05-05 12:06:55.997 DEBUG (MainThread) [pyvlx] SEND: <FrameGetStateRequest/> 2024-05-05 12:06:56.206 DEBUG (MainThread) [pyvlx] REC: <FrameGetStateConfirmation gateway_state="GatewayState.GATEWAY_MODE_WITH_ACTUATORS" gateway_sub_state="GatewaySubState.IDLE"/> 2024-05-05 12:06:56.207 DEBUG (MainThread) [pyvlx] SEND: <FrameSetUTCRequest time="2024-05-04 09:08:36"/> 2024-05-05 12:06:56.417 DEBUG (MainThread) [pyvlx] REC: <FrameSetUTCConfirmation/> 2024-05-05 12:06:56.418 DEBUG (MainThread) [pyvlx] SEND: <FrameGetNetworkSetupRequest/> 2024-05-05 12:06:56.423 DEBUG (MainThread) [pyvlx] REC: <FrameGetNetworkSetupConfirmation ipaddress="192.168.1.50" netmask="255.255.255.0" gateway="192.168.1.123" dhcp="DHCPParameter.ENABLE"/> 2024-05-05 12:06:56.424 DEBUG (MainThread) [pyvlx] SEND: <FrameHouseStatusMonitorEnableRequest/> 2024-05-05 12:06:57.853 DEBUG (MainThread) [pyvlx] REC: <FrameHouseStatusMonitorEnableConfirmation/> 2024-05-05 12:06:57.854 DEBUG (MainThread) [pyvlx] Heartbeat start 2024-05-05 12:06:57.854 DEBUG (MainThread) [pyvlx] Connecting to KLF 200 was opened 2024-05-05 12:06:57.855 DEBUG (MainThread) [pyvlx] Heartbeat: creating task 2024-05-05 12:06:57.859 DEBUG (MainThread) [pyvlx] Heartbeat: task started 2024-05-05 12:06:57.859 DEBUG (MainThread) [pyvlx] Heartbeat: sleeping 2024-05-05 12:06:57.882 DEBUG (MainThread) [pyvlx] SEND: <FrameHouseStatusMonitorDisableRequest/> 2024-05-05 12:06:58.890 DEBUG (MainThread) [pyvlx] Heartbeat stopped 2024-05-05 12:06:58.915 DEBUG (MainThread) [pyvlx] Heartbeat __init__ 2024-05-05 12:06:58.915 DEBUG (MainThread) [pyvlx] Loadig pyvlx v0.1.76 2024-05-05 12:06:58.915 DEBUG (MainThread) [pyvlx] Connecting to KLF 200 2024-05-05 12:06:58.965 DEBUG (MainThread) [pyvlx] Connecting to KLF 200 was closed 2024-05-05 12:06:58.965 DEBUG (MainThread) [pyvlx] Connecting to KLF 200 was closed 2024-05-05 12:06:59.536 DEBUG (MainThread) [pyvlx] Connecting to KLF 200 was closed 2024-05-05 12:07:03.773 DEBUG (MainThread) [pyvlx] Amount of connections since last HA start: 1 2024-05-05 12:07:03.773 DEBUG (MainThread) [pyvlx] SEND: <FramePasswordEnterRequest password="9C****"/> 2024-05-05 12:07:03.776 DEBUG (MainThread) [pyvlx] REC: <FramePasswordEnterConfirmation status="PasswordEnterConfirmationStatus.SUCCESSFUL"/> 2024-05-05 12:07:03.777 DEBUG (MainThread) [pyvlx] SEND: <FrameGetVersionRequest/> 2024-05-05 12:07:03.779 DEBUG (MainThread) [pyvlx] REC: <FrameGetVersionConfirmation software_version="0.2.0.0.71.0" hardware_version="6" product="KLF 200"/> 2024-05-05 12:07:03.779 DEBUG (MainThread) [pyvlx] SEND: <FrameGetProtocolVersionRequest/> 2024-05-05 12:07:03.792 DEBUG (MainThread) [pyvlx] REC: <FrameGetProtocolVersionConfirmation version="3.14"/> 2024-05-05 12:07:03.793 DEBUG (MainThread) [pyvlx] Connected to: <DtoVersion softwareversion="0.2.0.0.71.0" hardwareversion="6" productgroup="14" producttype="3"/>, <DtoProtocolVersion majorversion="3" minorversion="14"/> 2024-05-05 12:07:03.793 DEBUG (MainThread) [pyvlx] SEND: <FrameHouseStatusMonitorDisableRequest/> 2024-05-05 12:07:04.010 DEBUG (MainThread) [pyvlx] REC: <FrameHouseStatusMonitorDisableConfirmation/> 2024-05-05 12:07:04.011 DEBUG (MainThread) [pyvlx] SEND: <FrameGetStateRequest/> 2024-05-05 12:07:04.220 DEBUG (MainThread) [pyvlx] REC: <FrameGetStateConfirmation gateway_state="GatewayState.GATEWAY_MODE_WITH_ACTUATORS" gateway_sub_state="GatewaySubState.IDLE"/> 2024-05-05 12:07:04.221 DEBUG (MainThread) [pyvlx] SEND: <FrameSetUTCRequest time="2024-05-04 09:08:36"/> 2024-05-05 12:07:04.431 DEBUG (MainThread) [pyvlx] REC: <FrameSetUTCConfirmation/> 2024-05-05 12:07:04.432 DEBUG (MainThread) [pyvlx] SEND: <FrameGetNetworkSetupRequest/> 2024-05-05 12:07:04.435 DEBUG (MainThread) [pyvlx] REC: <FrameGetNetworkSetupConfirmation ipaddress="192.168.1.50" netmask="255.255.255.0" gateway="192.168.1.123" dhcp="DHCPParameter.ENABLE"/> 2024-05-05 12:07:04.436 DEBUG (MainThread) [pyvlx] SEND: <FrameHouseStatusMonitorEnableRequest/> 2024-05-05 12:07:06.241 DEBUG (MainThread) [pyvlx] REC: <FrameHouseStatusMonitorEnableConfirmation/> 2024-05-05 12:07:06.244 DEBUG (MainThread) [pyvlx] Heartbeat start 2024-05-05 12:07:06.245 DEBUG (MainThread) [pyvlx] Connecting to KLF 200 was opened 2024-05-05 12:07:06.245 DEBUG (MainThread) [pyvlx] SEND: <FrameGetAllNodesInformationRequest/> 2024-05-05 12:07:06.248 DEBUG (MainThread) [pyvlx] Heartbeat: creating task 2024-05-05 12:07:06.248 DEBUG (MainThread) [pyvlx] Heartbeat: task started 2024-05-05 12:07:06.249 DEBUG (MainThread) [pyvlx] Heartbeat: sleeping 2024-05-05 12:07:06.896 DEBUG (MainThread) [pyvlx] REC: <FrameGetAllNodesInformationConfirmation status="AllNodesInformationStatus.OK" number_of_nodes="4"/> 2024-05-05 12:07:06.916 DEBUG (MainThread) [pyvlx] REC: <FrameGetAllNodesInformationNotification node_id="0" order="0" placement="0" name="Abstellraum" velocity="Velocity.SILENT" node_type="NodeTypeWithSubtype.ROLLER_SHUTTER" product_group="1" product_type="5" node_variation="NodeVariation.NOT_SET" power_mode="1" build_number="19" serial_number="53:09:40:5a:0e:32:01:5d" state="UNKNOWN" current_position="UNKNOWN" target="UNKNOWN" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2024-05-04 09:08:38" alias_array=""/> 2024-05-05 12:07:06.917 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameGetAllNodesInformationNotification node_id="0" order="0" placement="0" name="Abstellraum" velocity="Velocity.SILENT" node_type="NodeTypeWithSubtype.ROLLER_SHUTTER" product_group="1" product_type="5" node_variation="NodeVariation.NOT_SET" power_mode="1" build_number="19" serial_number="53:09:40:5a:0e:32:01:5d" state="UNKNOWN" current_position="UNKNOWN" target="UNKNOWN" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2024-05-04 09:08:38" alias_array=""/> 2024-05-05 12:07:06.925 DEBUG (MainThread) [pyvlx] REC: <FrameGetAllNodesInformationNotification node_id="1" order="1" placement="0" name="Treppenhaus" velocity="Velocity.SILENT" node_type="NodeTypeWithSubtype.DUAL_ROLLER_SHUTTER" product_group="1" product_type="4" node_variation="NodeVariation.NOT_SET" power_mode="0" build_number="13" serial_number="56:0e:04:26:07:10:00:17" state="UNKNOWN" current_position="UNKNOWN" target="UNKNOWN" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2024-05-04 09:08:38" alias_array=""/> 2024-05-05 12:07:06.926 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameGetAllNodesInformationNotification node_id="1" order="1" placement="0" name="Treppenhaus" velocity="Velocity.SILENT" node_type="NodeTypeWithSubtype.DUAL_ROLLER_SHUTTER" product_group="1" product_type="4" node_variation="NodeVariation.NOT_SET" power_mode="0" build_number="13" serial_number="56:0e:04:26:07:10:00:17" state="UNKNOWN" current_position="UNKNOWN" target="UNKNOWN" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2024-05-04 09:08:38" alias_array=""/> 2024-05-05 12:07:06.938 DEBUG (MainThread) [pyvlx] REC: <FrameGetAllNodesInformationNotification node_id="2" order="2" placement="0" name="Schlafzimmer" velocity="Velocity.SILENT" node_type="NodeTypeWithSubtype.DUAL_ROLLER_SHUTTER" product_group="1" product_type="4" node_variation="NodeVariation.NOT_SET" power_mode="0" build_number="13" serial_number="56:0e:04:26:07:08:00:f6" state="UNKNOWN" current_position="UNKNOWN" target="UNKNOWN" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2024-05-04 09:08:38" alias_array=""/> 2024-05-05 12:07:06.939 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameGetAllNodesInformationNotification node_id="2" order="2" placement="0" name="Schlafzimmer" velocity="Velocity.SILENT" node_type="NodeTypeWithSubtype.DUAL_ROLLER_SHUTTER" product_group="1" product_type="4" node_variation="NodeVariation.NOT_SET" power_mode="0" build_number="13" serial_number="56:0e:04:26:07:08:00:f6" state="UNKNOWN" current_position="UNKNOWN" target="UNKNOWN" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2024-05-04 09:08:38" alias_array=""/> 2024-05-05 12:07:06.947 DEBUG (MainThread) [pyvlx] REC: <FrameGetAllNodesInformationNotification node_id="3" order="3" placement="0" name="Spielzimmer" velocity="Velocity.SILENT" node_type="NodeTypeWithSubtype.DUAL_ROLLER_SHUTTER" product_group="1" product_type="4" node_variation="NodeVariation.NOT_SET" power_mode="0" build_number="13" serial_number="56:0e:04:26:07:08:00:48" state="UNKNOWN" current_position="UNKNOWN" target="UNKNOWN" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2024-05-04 09:08:38" alias_array=""/> 2024-05-05 12:07:06.948 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameGetAllNodesInformationNotification node_id="3" order="3" placement="0" name="Spielzimmer" velocity="Velocity.SILENT" node_type="NodeTypeWithSubtype.DUAL_ROLLER_SHUTTER" product_group="1" product_type="4" node_variation="NodeVariation.NOT_SET" power_mode="0" build_number="13" serial_number="56:0e:04:26:07:08:00:48" state="UNKNOWN" current_position="UNKNOWN" target="UNKNOWN" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2024-05-04 09:08:38" alias_array=""/> 2024-05-05 12:07:06.949 DEBUG (MainThread) [pyvlx] REC: <FrameGetAllNodesInformationFinishedNotification/> 2024-05-05 12:07:06.951 DEBUG (MainThread) [pyvlx] SEND: <FrameGetSceneListRequest/> 2024-05-05 12:07:07.158 DEBUG (MainThread) [pyvlx] REC: <FrameGetSceneListConfirmation count_scenes="0"/> 2024-05-05 12:07:07.161 DEBUG (MainThread) [custom_components.velux.cover] Cover will be added: Abstellraum 2024-05-05 12:07:07.162 DEBUG (MainThread) [custom_components.velux.cover] Cover added: Treppenhaus_dual 2024-05-05 12:07:07.162 DEBUG (MainThread) [custom_components.velux.cover] Cover added: Treppenhaus_upper 2024-05-05 12:07:07.162 DEBUG (MainThread) [custom_components.velux.cover] Cover added: Treppenhaus_lower 2024-05-05 12:07:07.162 DEBUG (MainThread) [custom_components.velux.cover] Cover added: Schlafzimmer_dual 2024-05-05 12:07:07.162 DEBUG (MainThread) [custom_components.velux.cover] Cover added: Schlafzimmer_upper 2024-05-05 12:07:07.163 DEBUG (MainThread) [custom_components.velux.cover] Cover added: Schlafzimmer_lower 2024-05-05 12:07:07.163 DEBUG (MainThread) [custom_components.velux.cover] Cover added: Spielzimmer_dual 2024-05-05 12:07:07.163 DEBUG (MainThread) [custom_components.velux.cover] Cover added: Spielzimmer_upper 2024-05-05 12:07:07.163 DEBUG (MainThread) [custom_components.velux.cover] Cover added: Spielzimmer_lower 2024-05-05 12:07:07.225 INFO (MainThread) [custom_components.velux.switch] restored numeric value for Abstellraum Use Default Velocity: <state switch.abstellraum_use_default_velocity=off; device_class=switch, friendly_name=Abstellraum Use Default Velocity @ 2024-05-05T11:53:06.975826+02:00> 2024-05-05 12:07:36.250 DEBUG (MainThread) [pyvlx] Heartbeat: pulsing 2024-05-05 12:07:36.250 DEBUG (MainThread) [pyvlx] Heartbeat pulse 2024-05-05 12:07:36.250 DEBUG (MainThread) [pyvlx] SEND: <FrameGetStateRequest/> 2024-05-05 12:07:36.348 DEBUG (MainThread) [pyvlx] REC: <FrameGetStateConfirmation gateway_state="GatewayState.GATEWAY_MODE_WITH_ACTUATORS" gateway_sub_state="GatewaySubState.IDLE"/> 2024-05-05 12:07:36.349 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2715" node_ids="[0]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:07:36.560 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2715" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:07:37.113 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2715" status_id="1" node_id="0" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="1" parameter_data="NodeParameter.MP: 0 %, "/> 2024-05-05 12:07:37.113 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2715" status_id="1" node_id="0" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="1" parameter_data="NodeParameter.MP: 0 %, "/> 2024-05-05 12:07:37.115 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2715"/> 2024-05-05 12:07:37.118 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="0" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-08-06 13:24:48"/> 2024-05-05 12:07:37.118 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="0" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-08-06 13:24:48"/> 2024-05-05 12:07:37.119 DEBUG (MainThread) [pyvlx] Abstellraum position changed to: 0 % 2024-05-05 12:07:37.617 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2716" node_ids="[1]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:07:37.748 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2716" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:07:37.864 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2716" status_id="1" node_id="1" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:07:37.865 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2716" status_id="1" node_id="1" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:07:37.865 DEBUG (MainThread) [pyvlx] Treppenhaus position changed to: 0 % 2024-05-05 12:07:37.866 DEBUG (MainThread) [pyvlx] Treppenhaus position upper curtain changed to: 0 % 2024-05-05 12:07:37.866 DEBUG (MainThread) [pyvlx] Treppenhaus position lower curtain changed to: 0 % 2024-05-05 12:07:37.866 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2716"/> 2024-05-05 12:07:37.867 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="1" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-08-07 07:37:04"/> 2024-05-05 12:07:37.869 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="1" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-08-07 07:37:04"/> 2024-05-05 12:07:37.870 DEBUG (MainThread) [pyvlx] Treppenhaus position changed to: 0 % 2024-05-05 12:07:38.371 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2717" node_ids="[2]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:07:38.499 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2717" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:07:38.610 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2717" status_id="1" node_id="2" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:07:38.611 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2717" status_id="1" node_id="2" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:07:38.611 DEBUG (MainThread) [pyvlx] Schlafzimmer position changed to: 0 % 2024-05-05 12:07:38.612 DEBUG (MainThread) [pyvlx] Schlafzimmer position upper curtain changed to: 0 % 2024-05-05 12:07:38.612 DEBUG (MainThread) [pyvlx] Schlafzimmer position lower curtain changed to: 0 % 2024-05-05 12:07:38.615 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2717"/> 2024-05-05 12:07:38.616 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="2" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-08-08 01:49:20"/> 2024-05-05 12:07:38.619 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="2" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-08-08 01:49:20"/> 2024-05-05 12:07:38.619 DEBUG (MainThread) [pyvlx] Schlafzimmer position changed to: 0 % 2024-05-05 12:07:39.120 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2718" node_ids="[3]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:07:39.246 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2718" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:07:39.345 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2718" status_id="1" node_id="3" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:07:39.346 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2718" status_id="1" node_id="3" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:07:39.347 DEBUG (MainThread) [pyvlx] Spielzimmer position changed to: 0 % 2024-05-05 12:07:39.347 DEBUG (MainThread) [pyvlx] Spielzimmer position upper curtain changed to: 0 % 2024-05-05 12:07:39.347 DEBUG (MainThread) [pyvlx] Spielzimmer position lower curtain changed to: 0 % 2024-05-05 12:07:39.349 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2718"/> 2024-05-05 12:07:39.350 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="3" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-08-08 01:49:20"/> 2024-05-05 12:07:39.352 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="3" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-08-08 01:49:20"/> 2024-05-05 12:07:39.352 DEBUG (MainThread) [pyvlx] Spielzimmer position changed to: 0 % 2024-05-05 12:07:39.852 DEBUG (MainThread) [pyvlx] Heartbeat: sleeping 2024-05-05 12:08:09.854 DEBUG (MainThread) [pyvlx] Heartbeat: pulsing 2024-05-05 12:08:09.854 DEBUG (MainThread) [pyvlx] Heartbeat pulse 2024-05-05 12:08:09.855 DEBUG (MainThread) [pyvlx] SEND: <FrameGetStateRequest/> 2024-05-05 12:08:10.007 DEBUG (MainThread) [pyvlx] REC: <FrameGetStateConfirmation gateway_state="GatewayState.GATEWAY_MODE_WITH_ACTUATORS" gateway_sub_state="GatewaySubState.IDLE"/> 2024-05-05 12:08:10.008 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2719" node_ids="[0]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:08:10.220 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2719" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:08:10.768 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2719" status_id="1" node_id="0" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="1" parameter_data="NodeParameter.MP: 0 %, "/> 2024-05-05 12:08:10.769 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2719" status_id="1" node_id="0" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="1" parameter_data="NodeParameter.MP: 0 %, "/> 2024-05-05 12:08:10.770 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2719"/> 2024-05-05 12:08:10.773 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="0" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-01 08:21:52"/> 2024-05-05 12:08:10.774 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="0" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-01 08:21:52"/> 2024-05-05 12:08:10.775 DEBUG (MainThread) [pyvlx] Abstellraum position changed to: 0 % 2024-05-05 12:08:11.272 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2720" node_ids="[1]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:08:11.413 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2720" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:08:11.722 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2720" status_id="1" node_id="1" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:08:11.723 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2720" status_id="1" node_id="1" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:08:11.723 DEBUG (MainThread) [pyvlx] Treppenhaus position changed to: 0 % 2024-05-05 12:08:11.723 DEBUG (MainThread) [pyvlx] Treppenhaus position upper curtain changed to: 0 % 2024-05-05 12:08:11.724 DEBUG (MainThread) [pyvlx] Treppenhaus position lower curtain changed to: 0 % 2024-05-05 12:08:11.725 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2720"/> 2024-05-05 12:08:11.726 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="1" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-02 02:34:08"/> 2024-05-05 12:08:11.728 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="1" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-02 02:34:08"/> 2024-05-05 12:08:11.728 DEBUG (MainThread) [pyvlx] Treppenhaus position changed to: 0 % 2024-05-05 12:08:12.229 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2721" node_ids="[2]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:08:12.357 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2721" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:08:12.971 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2721" status_id="1" node_id="2" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:08:12.972 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2721" status_id="1" node_id="2" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:08:12.972 DEBUG (MainThread) [pyvlx] Schlafzimmer position changed to: 0 % 2024-05-05 12:08:12.972 DEBUG (MainThread) [pyvlx] Schlafzimmer position upper curtain changed to: 0 % 2024-05-05 12:08:12.973 DEBUG (MainThread) [pyvlx] Schlafzimmer position lower curtain changed to: 0 % 2024-05-05 12:08:12.976 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2721"/> 2024-05-05 12:08:12.976 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="2" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-02 20:46:24"/> 2024-05-05 12:08:12.978 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="2" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-02 20:46:24"/> 2024-05-05 12:08:12.979 DEBUG (MainThread) [pyvlx] Schlafzimmer position changed to: 0 % 2024-05-05 12:08:13.479 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2722" node_ids="[3]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:08:13.606 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2722" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:08:13.715 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2722" status_id="1" node_id="3" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:08:13.716 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2722" status_id="1" node_id="3" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:08:13.716 DEBUG (MainThread) [pyvlx] Spielzimmer position changed to: 0 % 2024-05-05 12:08:13.717 DEBUG (MainThread) [pyvlx] Spielzimmer position upper curtain changed to: 0 % 2024-05-05 12:08:13.717 DEBUG (MainThread) [pyvlx] Spielzimmer position lower curtain changed to: 0 % 2024-05-05 12:08:13.719 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2722"/> 2024-05-05 12:08:13.719 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="3" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-03 14:58:40"/> 2024-05-05 12:08:13.721 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="3" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-03 14:58:40"/> 2024-05-05 12:08:13.722 DEBUG (MainThread) [pyvlx] Spielzimmer position changed to: 0 % 2024-05-05 12:08:14.222 DEBUG (MainThread) [pyvlx] Heartbeat: sleeping 2024-05-05 12:08:44.223 DEBUG (MainThread) [pyvlx] Heartbeat: pulsing 2024-05-05 12:08:44.223 DEBUG (MainThread) [pyvlx] Heartbeat pulse 2024-05-05 12:08:44.223 DEBUG (MainThread) [pyvlx] SEND: <FrameGetStateRequest/> 2024-05-05 12:08:44.378 DEBUG (MainThread) [pyvlx] REC: <FrameGetStateConfirmation gateway_state="GatewayState.GATEWAY_MODE_WITH_ACTUATORS" gateway_sub_state="GatewaySubState.IDLE"/> 2024-05-05 12:08:44.379 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2723" node_ids="[0]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:08:44.591 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2723" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:08:45.155 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2723" status_id="1" node_id="0" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="1" parameter_data="NodeParameter.MP: 0 %, "/> 2024-05-05 12:08:45.156 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2723" status_id="1" node_id="0" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="1" parameter_data="NodeParameter.MP: 0 %, "/> 2024-05-05 12:08:45.158 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2723"/> 2024-05-05 12:08:45.160 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="0" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-27 03:18:56"/> 2024-05-05 12:08:45.160 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="0" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-27 03:18:56"/> 2024-05-05 12:08:45.161 DEBUG (MainThread) [pyvlx] Abstellraum position changed to: 0 % 2024-05-05 12:08:45.660 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2724" node_ids="[1]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:08:45.791 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2724" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:08:45.899 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2724" status_id="1" node_id="1" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:08:45.899 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2724" status_id="1" node_id="1" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:08:45.900 DEBUG (MainThread) [pyvlx] Treppenhaus position changed to: 0 % 2024-05-05 12:08:45.900 DEBUG (MainThread) [pyvlx] Treppenhaus position upper curtain changed to: 0 % 2024-05-05 12:08:45.900 DEBUG (MainThread) [pyvlx] Treppenhaus position lower curtain changed to: 0 % 2024-05-05 12:08:45.905 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2724"/> 2024-05-05 12:08:45.905 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="1" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-27 21:31:12"/> 2024-05-05 12:08:45.907 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="1" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-27 21:31:12"/> 2024-05-05 12:08:45.908 DEBUG (MainThread) [pyvlx] Treppenhaus position changed to: 0 % 2024-05-05 12:08:46.408 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2725" node_ids="[2]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:08:46.534 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2725" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:08:46.617 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2725" status_id="1" node_id="2" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:08:46.617 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2725" status_id="1" node_id="2" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:08:46.618 DEBUG (MainThread) [pyvlx] Schlafzimmer position changed to: 0 % 2024-05-05 12:08:46.618 DEBUG (MainThread) [pyvlx] Schlafzimmer position upper curtain changed to: 0 % 2024-05-05 12:08:46.619 DEBUG (MainThread) [pyvlx] Schlafzimmer position lower curtain changed to: 0 % 2024-05-05 12:08:46.620 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2725"/> 2024-05-05 12:08:46.621 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="2" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-28 15:43:28"/> 2024-05-05 12:08:46.623 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="2" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-28 15:43:28"/> 2024-05-05 12:08:46.623 DEBUG (MainThread) [pyvlx] Schlafzimmer position changed to: 0 % 2024-05-05 12:08:47.124 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2726" node_ids="[3]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:08:47.251 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2726" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:08:47.325 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2726" status_id="1" node_id="3" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:08:47.325 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2726" status_id="1" node_id="3" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:08:47.326 DEBUG (MainThread) [pyvlx] Spielzimmer position changed to: 0 % 2024-05-05 12:08:47.326 DEBUG (MainThread) [pyvlx] Spielzimmer position upper curtain changed to: 0 % 2024-05-05 12:08:47.326 DEBUG (MainThread) [pyvlx] Spielzimmer position lower curtain changed to: 0 % 2024-05-05 12:08:47.330 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2726"/> 2024-05-05 12:08:47.331 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="3" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-28 15:43:28"/> 2024-05-05 12:08:47.332 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="3" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-09-28 15:43:28"/> 2024-05-05 12:08:47.333 DEBUG (MainThread) [pyvlx] Spielzimmer position changed to: 0 % 2024-05-05 12:08:47.833 DEBUG (MainThread) [pyvlx] Heartbeat: sleeping 2024-05-05 12:09:07.168 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="0" state="DONE" current_position="0 %" target="0 %" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-13 19:48:48"/> 2024-05-05 12:09:07.169 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="0" state="DONE" current_position="0 %" target="0 %" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-13 19:48:48"/> 2024-05-05 12:09:07.169 DEBUG (MainThread) [pyvlx] Abstellraum position changed to: 0 % 2024-05-05 12:09:08.240 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="1" state="DONE" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-14 14:01:04"/> 2024-05-05 12:09:08.241 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="1" state="DONE" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-14 14:01:04"/> 2024-05-05 12:09:08.241 DEBUG (MainThread) [pyvlx] Treppenhaus position changed to: 0 % 2024-05-05 12:09:09.350 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="2" state="DONE" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-15 08:13:20"/> 2024-05-05 12:09:09.351 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="2" state="DONE" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-15 08:13:20"/> 2024-05-05 12:09:09.351 DEBUG (MainThread) [pyvlx] Schlafzimmer position changed to: 0 % 2024-05-05 12:09:10.429 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="3" state="DONE" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-16 20:37:52"/> 2024-05-05 12:09:10.429 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="3" state="DONE" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-16 20:37:52"/> 2024-05-05 12:09:10.429 DEBUG (MainThread) [pyvlx] Spielzimmer position changed to: 0 % 2024-05-05 12:09:17.835 DEBUG (MainThread) [pyvlx] Heartbeat: pulsing 2024-05-05 12:09:17.835 DEBUG (MainThread) [pyvlx] Heartbeat pulse 2024-05-05 12:09:17.835 DEBUG (MainThread) [pyvlx] SEND: <FrameGetStateRequest/> 2024-05-05 12:09:17.990 DEBUG (MainThread) [pyvlx] REC: <FrameGetStateConfirmation gateway_state="GatewayState.GATEWAY_MODE_WITH_ACTUATORS" gateway_sub_state="GatewaySubState.IDLE"/> 2024-05-05 12:09:17.991 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2727" node_ids="[0]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:09:18.202 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2727" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:09:18.740 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2727" status_id="1" node_id="0" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="1" parameter_data="NodeParameter.MP: 0 %, "/> 2024-05-05 12:09:18.740 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2727" status_id="1" node_id="0" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="1" parameter_data="NodeParameter.MP: 0 %, "/> 2024-05-05 12:09:18.742 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2727"/> 2024-05-05 12:09:18.745 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="0" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-22 22:16:00"/> 2024-05-05 12:09:18.746 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="0" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="UNKNOWN" current_position_fp2="UNKNOWN" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-22 22:16:00"/> 2024-05-05 12:09:18.747 DEBUG (MainThread) [pyvlx] Abstellraum position changed to: 0 % 2024-05-05 12:09:19.248 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2728" node_ids="[1]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:09:19.377 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2728" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:09:19.685 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2728" status_id="1" node_id="1" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:09:19.686 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2728" status_id="1" node_id="1" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:09:19.687 DEBUG (MainThread) [pyvlx] Treppenhaus position changed to: 0 % 2024-05-05 12:09:19.687 DEBUG (MainThread) [pyvlx] Treppenhaus position upper curtain changed to: 0 % 2024-05-05 12:09:19.687 DEBUG (MainThread) [pyvlx] Treppenhaus position lower curtain changed to: 0 % 2024-05-05 12:09:19.690 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2728"/> 2024-05-05 12:09:19.691 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="1" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-23 16:28:16"/> 2024-05-05 12:09:19.692 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="1" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-23 16:28:16"/> 2024-05-05 12:09:19.693 DEBUG (MainThread) [pyvlx] Treppenhaus position changed to: 0 % 2024-05-05 12:09:20.194 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2729" node_ids="[2]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:09:20.320 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2729" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:09:20.423 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2729" status_id="1" node_id="2" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:09:20.423 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2729" status_id="1" node_id="2" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:09:20.424 DEBUG (MainThread) [pyvlx] Schlafzimmer position changed to: 0 % 2024-05-05 12:09:20.424 DEBUG (MainThread) [pyvlx] Schlafzimmer position upper curtain changed to: 0 % 2024-05-05 12:09:20.424 DEBUG (MainThread) [pyvlx] Schlafzimmer position lower curtain changed to: 0 % 2024-05-05 12:09:20.429 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2729"/> 2024-05-05 12:09:20.430 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="2" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-23 16:28:16"/> 2024-05-05 12:09:20.432 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="2" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-23 16:28:16"/> 2024-05-05 12:09:20.432 DEBUG (MainThread) [pyvlx] Schlafzimmer position changed to: 0 % 2024-05-05 12:09:20.933 DEBUG (MainThread) [pyvlx] SEND: <FrameStatusRequestRequest session_id="2730" node_ids="[3]" status_type="StatusType.REQUEST_CURRENT_POSITION" fpi1="254" fpi2="0"/> 2024-05-05 12:09:21.057 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestConfirmation session_id="2730" status="StatusRequestStatus.ACCEPTED"/> 2024-05-05 12:09:21.360 DEBUG (MainThread) [pyvlx] REC: <FrameStatusRequestNotification session_id="2730" status_id="1" node_id="3" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:09:21.360 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameStatusRequestNotification session_id="2730" status_id="1" node_id="3" run_status="RunStatus.EXECUTION_COMPLETED" status_reply="StatusReply.COMMAND_COMPLETED_OK" status_type="StatusType.REQUEST_CURRENT_POSITION" status_count="3" parameter_data="NodeParameter.MP: 0 %, NodeParameter.FP1: 0 %, NodeParameter.FP2: 0 %, "/> 2024-05-05 12:09:21.361 DEBUG (MainThread) [pyvlx] Spielzimmer position changed to: 0 % 2024-05-05 12:09:21.361 DEBUG (MainThread) [pyvlx] Spielzimmer position upper curtain changed to: 0 % 2024-05-05 12:09:21.361 DEBUG (MainThread) [pyvlx] Spielzimmer position lower curtain changed to: 0 % 2024-05-05 12:09:21.366 DEBUG (MainThread) [pyvlx] REC: <FrameSessionFinishedNotification session_id="2730"/> 2024-05-05 12:09:21.367 DEBUG (MainThread) [pyvlx] REC: <FrameNodeStatePositionChangedNotification node_id="3" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-24 10:40:32"/> 2024-05-05 12:09:21.368 DEBUG (MainThread) [pyvlx] NodeUpdater process frame: <FrameNodeStatePositionChangedNotification node_id="3" state="UNKNOWN" current_position="0 %" target="0 %" current_position_fp1="0 %" current_position_fp2="0 %" current_position_fp3="UNKNOWN" current_position_fp4="UNKNOWN" remaining_time="0" time="2088-10-24 10:40:32"/> 2024-05-05 12:09:21.369 DEBUG (MainThread) [pyvlx] Spielzimmer position changed to: 0 % 2024-05-05 12:09:21.870 DEBUG (MainThread) [pyvlx] Heartbeat: sleeping
The text was updated successfully, but these errors were encountered: