Replies: 12 comments 23 replies
-
|
There is currently no plans to support macOS Sonoma. As stated last year, this project has retired. If I have some free time, I may work on it or if someone else sends a PR, I can review it. |
Beta Was this translation helpful? Give feedback.
-
|
I will work on it from mid October on to get Sonoma running on the NUC 8I7HVK. I will send you then the EFI. Maybe you can implement this in a USB installer. What is with @goodbest .... He also mentioned couple Months ago, to work on runnin Sonoma on this Maschine. Is there any Progress? I was reading a lot in the German Hackintosh Forum about the Sonoma install Problems. So i will give it a try in October 2023. Stay tuned. |
Beta Was this translation helpful? Give feedback.
-
|
good news, thank you . |
Beta Was this translation helpful? Give feedback.
-
|
Having issues when trying in AMD Graphics mode. Or atleast that's what I'm assuming is the issue. Installs, gets to the booting animation with Apple logo and progress bar but then goes black afterwards and doesn't do anything. Even in safe-mode booting (by holding shift in the picker) |
Beta Was this translation helpful? Give feedback.
-
You can try to add "-v" at boot args. It will help to debug the issues. |
Beta Was this translation helpful? Give feedback.
-
Good to know. It would also be great if you will fork this repo to make your own Sonoma support project. |
Beta Was this translation helpful? Give feedback.
-
|
Created an Github account to follow this thread :) Looking forward if someone can make it work with Sonoma |
Beta Was this translation helpful? Give feedback.
-
|
Hey Guys ----> Watch this please. |
Beta Was this translation helpful? Give feedback.
-
|
Could you please send me your EFIImraan Jhetam On 6 Dec 2023, at 23:56, SashonIT ***@***.***> wrote:
Hey Guys ----> Watch this please.
#1091 (reply in thread)
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
link not working |
Beta Was this translation helpful? Give feedback.
-
|
https://github.com/SashonIT/NUC8I7HVK-SONOMA-14.1-EFI There you go. Please remind. you already need to do some steps by your own. Dont expect, that this is fully working right OOB! ASk Questions if you Stuck somewhere. |
Beta Was this translation helpful? Give feedback.
-
|
LAN2 doesn‘t work |
Beta Was this translation helpful? Give feedback.
-
|
#############I can confirm this. ###################I dont know why. It was Running in Ventura until 14.1 or 14.1.2. Since 14.2.1 its not running anymore. #############################But System Recognizes the first Ethernet. But Internet is not passing through. !!!! I found the Solution!!!! Copy appleGB.kext into your KExt Folder of your System EFI. Then the second En0 will work. Which is the First one by the way. Now both of them are running again. HEre you can find the https://github.com/osy/HaC-Mini/files/9950812/AppleIGB.kext.zip Also READ POST 947 of this Repository. |
Beta Was this translation helpful? Give feedback.
-
|
Does Anyone try 14.3 with this EFI? |
Beta Was this translation helpful? Give feedback.
-
|
Yes, Me! Its running on my MAschine Fluent. Without any Problems. Its also my EFI. So it runs perfect. Everything is working except of the SD Card Reader. |
Beta Was this translation helpful? Give feedback.
-
|
So any update on "best practices" for how to update to Sonoma? 😊 |
Beta Was this translation helpful? Give feedback.
-
|
You have to do it Manually. Create a Sonoma Install Stick manually. And Copy my Efi afterwards into it. Then Install. LAst stable Install is : Sonoma 14.3.1 I will upload my LAtest EFI. But for first INstall you need to Disable the 3 Skywalker KExt. I have 3 Config.plist in this EFI. 1. Update Config.plist. --> Here are the Skywalker Kexts deactivated I also Deleted my Serial Number. You have to create one or use your old on. Keep that in mind. Also if you have installed a lower Version of Sonoma. For Updating from the System Preferences you need to Revert the OCLP Patcher first and have to take out all these Skywalker KExt. Then Update. After Update ---> Apply the OCLP PAtch Again and put the 3 Skywalker Kext in again. |
Beta Was this translation helpful? Give feedback.
-
|
100% agree Do not Update to 14.4 which will come Soon. Many Many Problems occurs during the BETA Phase. |
Beta Was this translation helpful? Give feedback.
-
|
Read this here first. Use deepl Software to translate into your Language. https://www.hackintosh-forum.de/forum/thread/58656-anleitung-f%C3%BCr-broadcom-wlan-patch-unter-macos-sonoma/?postID=788294#post788294 You need this here ….——-> With the corresponding IOSkywalkFamily.kext (vers. 1.1.0) exchange and the new OCLP 1.4.1 root patch, everything worked fine after the update to MacOS 14.4. WLAN is still/again there and works as it should. Thanks to the forum. Also the OCLP is now updated to Version 1.4.1. Read this here. https://github.com/dortania/OpenCore-Legacy-Patcher/releases @1git Please do us a favour and report also your success and how you did it, as only reporting Problems. We also want to read the good and healthy News here. Also i dont do the 14.4 Update now. I do it somehow later. My System is now running Stable and i need it everyday, until i can replace it with a Original M3 MAx System. |
Beta Was this translation helpful? Give feedback.
-
|
A USer from the Hackintosh forum has just done the update. However, he still had to swap the IOSkywalkFamily-kext separately and then run the root patch of OCLP 1.4.1 again. |
Beta Was this translation helpful? Give feedback.
-
|
That did the trick! I had upgraded so was in an interesting state... After it booted into 14.4... (no wifi) System boots super fast; I'll keep testing and see if I hit bugs... Thanks for the point in the right direction! |
Beta Was this translation helpful? Give feedback.
-
|
You are Welcom and Coolio @1git. ….. Congrats …. Thanks for your report. I faced also long Boottimes in the past……. from 14.1 to 14.2 but not 14.2 to 14.2.1. then again from 14.2.1 to 14.3, but not from 14.3 to 14.3.1 I am glad that you did it. Also glad about to know that 14.4 is running on this little NUC. Nice to hear, that 14.4 is booting super Fast. 14.2.1 was also super Fast. Since 14.3 and 14.3.1 MY System felt a little slower than ususal. MAybe i will update the Skywalker Kext to version 1.1.0 before i update. I will report then if my boottimes are different to yours. |
Beta Was this translation helpful? Give feedback.
-
|
O.C.L.P Version 1.4.2 came out Yesterday. Just for information! I Updated now. 35 Minutes in Total. Here is my 14.4 Sonoma EFI with the updated IOSkywalker.Kext Version 1.1 As always----> I Deleted my Serial Number in Platform Info. You need to put in yours or Generate a new one. And yes.... System Response is now snappier then before. Great |
Beta Was this translation helpful? Give feedback.
-
|
With this build would you please clarify the status for support of USB BT dongles? I'm using CSR4.0 and see it recognized in the device list, however, it seems it's not initiated properly. |
Beta Was this translation helpful? Give feedback.
-
|
Sorry for checking again, anyone can suggest on USB BT solution? |
Beta Was this translation helpful? Give feedback.
-
|
I can report using a CSR 4.0 Dongle from Sonnettech with this EFI and it works. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks, I got it running with the original BT/Wifi module. |
Beta Was this translation helpful? Give feedback.
-
|
I can report that the Update to 14.5 worked fine and everything seems to work as expected. |
Beta Was this translation helpful? Give feedback.
-
Great. What Did you add to the EFI? BTW: What doesn't work for me with this EFI is the BT from my BCM94360NG - WiFI works - maybe I need to add AirportBrcmFixup - didn't try this so far - BT dongle works for now. |
Beta Was this translation helpful? Give feedback.
-
|
I used both airportitlwm and Intel bluetooth from here: https://openintelwireless.github.io/ |
Beta Was this translation helpful? Give feedback.
-
|
That would be nice. Maybe I try my luck with the Intel WiFi/BT as my current solution works but is a bit unstable from time to time. |
Beta Was this translation helpful? Give feedback.
-
|
Here you go: |
Beta Was this translation helpful? Give feedback.
-
|
Thank you very much! And guess what I saw, when I opened my NUC to change the WiFi-Card… But nether the less I will try the Intel-WiFi especially as I don't need any continuity features and the WiFi 6 is faster. |
Beta Was this translation helpful? Give feedback.
-
question just as title. does current version can support Sonoma now?
Beta Was this translation helpful? Give feedback.
All reactions