diff --git a/assets/openscad/gridfinity-extended/gridfinity_basic_cup-label_relief_text.gif b/assets/openscad/gridfinity-extended/gridfinity_basic_cup-label_relief_text.gif
new file mode 100644
index 0000000..580db14
Binary files /dev/null and b/assets/openscad/gridfinity-extended/gridfinity_basic_cup-label_relief_text.gif differ
diff --git a/assets/openscad/gridfinity-extended/gridfinity_basic_cup-lip_style_text.gif b/assets/openscad/gridfinity-extended/gridfinity_basic_cup-lip_style_text.gif
index 942580f..cdb360a 100644
Binary files a/assets/openscad/gridfinity-extended/gridfinity_basic_cup-lip_style_text.gif and b/assets/openscad/gridfinity-extended/gridfinity_basic_cup-lip_style_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-camlock_demo_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-camlock_demo_text.gif
new file mode 100644
index 0000000..e8838c5
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-camlock_demo_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-centec_demo_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-centec_demo_text.gif
new file mode 100644
index 0000000..82d5e64
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-centec_demo_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-demo_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-demo_text.gif
new file mode 100644
index 0000000..9ecac43
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-demo_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-dw735_demo_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-dw735_demo_text.gif
new file mode 100644
index 0000000..b26540e
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-dw735_demo_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-dyson_demo_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-dyson_demo_text.gif
new file mode 100644
index 0000000..d0ae5cb
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-dyson_demo_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_diameter_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_diameter_text.gif
new file mode 100644
index 0000000..488251b
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_diameter_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_length_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_length_text.gif
new file mode 100644
index 0000000..c9cf8e2
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_length_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_measurement_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_measurement_text.gif
new file mode 100644
index 0000000..3db57ce
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_measurement_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_taper_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_taper_text.gif
new file mode 100644
index 0000000..d53b663
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_taper_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_wallthickness_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_wallthickness_text.gif
new file mode 100644
index 0000000..e18e77e
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-endcommon_wallthickness_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_demo_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_demo_text.gif
new file mode 100644
index 0000000..c9d79ac
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_demo_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_screwborder_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_screwborder_text.gif
new file mode 100644
index 0000000..53891ed
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_screwborder_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_screwcount_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_screwcount_text.gif
new file mode 100644
index 0000000..b08abf6
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_screwcount_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_screwdiameter_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_screwdiameter_text.gif
new file mode 100644
index 0000000..c565d2d
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_screwdiameter_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_screwposition_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_screwposition_text.gif
new file mode 100644
index 0000000..b6a6fe0
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_screwposition_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_thickness_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_thickness_text.gif
new file mode 100644
index 0000000..33941c3
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_thickness_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_width_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_width_text.gif
new file mode 100644
index 0000000..05f3b1b
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-flange_width_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_barbscount_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_barbscount_text.gif
new file mode 100644
index 0000000..18aed96
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_barbscount_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_barbssymmetrical_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_barbssymmetrical_text.gif
new file mode 100644
index 0000000..15742b6
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_barbssymmetrical_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_barbsthickness_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_barbsthickness_text.gif
new file mode 100644
index 0000000..ef1eea4
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_barbsthickness_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_demo_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_demo_text.gif
new file mode 100644
index 0000000..7d2c67a
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_demo_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_endcapdiameter_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_endcapdiameter_text.gif
new file mode 100644
index 0000000..fb2b94c
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_endcapdiameter_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_endcapthickness_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_endcapthickness_text.gif
new file mode 100644
index 0000000..307218b
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_endcapthickness_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_stoplength_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_stoplength_text.gif
new file mode 100644
index 0000000..179961e
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_stoplength_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_stopsymmetrical_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_stopsymmetrical_text.gif
new file mode 100644
index 0000000..5be7cf1
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_stopsymmetrical_text.gif differ
diff --git a/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_stopthickness_text.gif b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_stopthickness_text.gif
new file mode 100644
index 0000000..73a133f
Binary files /dev/null and b/assets/openscad/hose-adapters/vacuum_hose_adapter-hose_stopthickness_text.gif differ
diff --git a/docs/openscad/hose-adapter/hose-adapter-connectors.md b/docs/openscad/hose-adapter/hose-adapter-connectors.md
new file mode 100644
index 0000000..b260307
--- /dev/null
+++ b/docs/openscad/hose-adapter/hose-adapter-connectors.md
@@ -0,0 +1,110 @@
+---
+layout: default
+title: OpenSCAD Hose Adapter Connectors
+nav_order: 1
+has_children: true
+parent: OpenSCAD Hose adapters
+permalink: /docs/openscad/hose-adapter/connectors
+---
+# Connectors
+There are currently 5 types of connectors, each can be use as **connector 1** or **connector 2**. Each connector type has settings that are only relevant to that specific connectors. Some connectors have no configurable settings.
+
+{:.wrap-lightbox width="500"}
+
+## Common settings
+Common settings for all connectors. Some settings will be overridden by specific connectors. I.E. Dyson V5 has a fixed size.
+
+Setting | Description
+-|-
+`End_Style` |The style of the end
options
- `hose`, Hose connector
- `flange`, Flange
- `mag`, Magnetic Flange
- `nozzle`, Nozzle
- `camlock`, Camlock connector
- `centec`, Centec connector
- `dyson`, Dyson connector
- `dw735`, Dewalt 735 connector
+`End_Measurement` | {:.wrap-lightbox width="150" }
Is the measurement the adapter's outside or inside diameter?
options
- `inner`, Inner adapter measurement
- `outer`, Outer adapter measurement
+`End_Wall_Thickness` | {:.wrap-lightbox width="150" }
Wall thickness
`default=2`
+`End_Diameter`| {:.wrap-lightbox width="150" }
Diameter of the adapter (mm)
+`End_Length` | {:.wrap-lightbox width="150" }
Length of the connector (including the flange).
+`End_Taper` | {:.wrap-lightbox width="150" }
Taper of the connector, use negative to taper other direction.
+
+## Connector - Hose connector
+{:.wrap-lightbox width="500"}
+The hose connector is the most generic connector. Its intended to be pushed inside a hose or over an existing connector. We can enable a stop to prevent the adapter being pulled in to the hose, and barbs for soft style pipe.
+
+Setting | Description
+-|-
+`End_StopThickness` | {:.wrap-lightbox width="150" }
Thickness of hose stop
+`End_StopLength` | {:.wrap-lightbox width="150" }
Length of hose stop. It will be easier to if the length is greater than the StopThickness.
+`End_Stop_Symmetrical` | {:.wrap-lightbox width="150" }
Enabling will taper the stop on both sides, this can be helpful depending on your print orientation .
+`End_Barbs_Count` | {:.wrap-lightbox width="150" }
The number of barbs
+`End_Barbs_Thickness` | {:.wrap-lightbox width="150" }
Thickness of the barbs, default is half wall thickness
+`End_Barbs_Symmetrical` | {:.wrap-lightbox width="150" }
Should the barbs be tapered both sides. Might be easier to print.
+`End_Hose_EndCap_Thickness` | {:.wrap-lightbox width="150" }
Adds an end cap of the selected width in mm to the end of a hose connector. This can be used to create a closed connector, or you can add a hole using `End_Hose_EndCap_Diameter`.
- `0`: disables the endcap. Default
+`End_Hose_EndCap_Diameter` | {:.wrap-lightbox width="150" }
Creates a hole in the endcap of the provided diameter in mm.
+
+## Connector - Flange
+{:.wrap-lightbox width="500"}
+
+Setting | Description
+-|-
+`End_Flange_Width` | {:.wrap-lightbox width="150" }
Width of Flange added to the connector diameter
+`End_Flange_Thickness` | {:.wrap-lightbox width="150" }
Thickness of the flange
+`End_Flange_Screw_Position` | {:.wrap-lightbox width="150" }
Position of the screws added to the connector diameter, 0 = middle of flange
+`End_Flange_Screw_Border` | {:.wrap-lightbox width="150" }
Minium amount of the material around the magnets (mm), 0 = End_Flange_Width / 4
+`End_Flange_Screw_Count` | {:.wrap-lightbox width="150" }
Number of Screw holes flange
+`End_Flange_Screw_Diameter` | {:.wrap-lightbox width="150" }
The diameter of the screws (mm)
+
+## Connector - Magnetic Connector
+
+Setting | Description
+-|-
+`End_Magnets_Count` | Number of magnets in the connector
+`End_Magnet_Diameter` | The diameter of the magnets (mm)
+`End_Magnet_Thickness` | The thickness of the magnets (mm)
+`End_Magnet_Border` | Minium amount of the material around the magnets (mm)
+`End_Magnet_Flange_Thickness` | Thickness of the magnet flange (mm)
+`End_Ring` | Include a flange alignment ring `[no: No alignment ring, protruding: protruding ring, recessed: Recessed ring]`
+
+## Connector - Magnetic Connector - Alignment Ring
+
+Setting | Description
+-|-
+`Draw_Alignment_Ring` |draw just the alignment ring `default = "no"` `[end1: Draw end 1, end2: Draw end 2, no: Don't draw]`
+`Alignment_Depth` | Alignment depth in to flange (mm)
+`Alignment_Upper_Width` | Alignment upper width at widest part (mm)
+`Alignment_Lower_Width` | Alignment lower width at narrowest part (mm)
+`Alignment_Side_Clearance` | Alignment side clearance, to give nice fit (mm).
+`Alignment Depth Clearance` | to prevent hitting bottom (mm).
+
+## Connector - Nozzle
+
+Setting | Description
+-|-
+`End_Nozzle_Shape` | `[square, circle]`
+`End_Nozzle_Square_Width` |
+`End_Nozzle_Square_Depth` |
+`End_Nozzle_Tip_Wall_Thickness` |
+`End_Nozzle_Radius` |
+`End_Nozzle_Length` |
+`End_Nozzle_xOffset` |
+`End_Nozzle_yOffset` |
+`End_Nozzle_Chamfer_Percentage` |
+`End_Nozzle_Chamfer_Angle` |
+
+## Connector - camlock
+This connector is compatible with (PeterH)[PeterH]'s (camlock connectors)[https://www.printables.com/model/461256-shopvac-50mm-camlock-connectors-with-magnetic-catc]
+{:.wrap-lightbox width="500"}
+
+## Connector - centec
+This connector is compatible with CenTec quick connect system.
+{:.wrap-lightbox width="500"}
+
+## Connector - dyson
+This connector is compatible with the Dyson DC35/DC45/DC52/DC58/DC59/V6 vacuums. It has the connector on four sides of the connector, which is handy for bent style nozzles.
+{:.wrap-lightbox width="500"}
+
+## Connector - dw735
+This connector is compatible with the Dewalt dw735 planer. If the transition has an angle (I.E. is not straight) it will have a range of attachment points to allow for more rotational options when attaching.
+{:.wrap-lightbox width="500"}
+
+# other
+
+Setting | Description
+-|-
+`Enable_Debug_Slice` | Slice model in half to be able to easy see inside
\ No newline at end of file
diff --git a/docs/openscad/hose-adapter/hose-adapter-transition.md b/docs/openscad/hose-adapter/hose-adapter-transition.md
new file mode 100644
index 0000000..fce1b19
--- /dev/null
+++ b/docs/openscad/hose-adapter/hose-adapter-transition.md
@@ -0,0 +1,47 @@
+---
+layout: default
+title: OpenSCAD Hose Adapter Transitions
+nav_order: 1
+has_children: true
+parent: OpenSCAD Hose adapters
+permalink: /docs/openscad/hose-adapter/transitions
+---
+# Transition
+This covers the way that the two end of the adapter are connected. The transition will take in to account the size, wall and thickness of each end and using the provided settings created a shape.
+
+## Transition
+
+Setting | Description
+-|-
+`Transition_Style` | tapered for hose connections, flat for attaching to a device [flat, taper+bend: Taper then bend, bend+taper: Bend then taper, organicbend: Tapered bend, hull: Hull for multiple end count]
+`Transition_Length` | Length of the transition between the two ends
+`Transition_Bend_Radius` | Radius of transition bend (mm)
+`Transition_Angle` | Angle of bend through the transition section.
+`Transition_xOffset` | X offset for the connector, not supported on taperedbend.
+`Transition_yOffset` | Y offset for the connector, not supported on taperedbend.
+
+## Transition Multiple connector settings
+
+Setting | Description
+-|-
+`Transition_End2_Count` | Duplicate the second connector. Adjust angle and bend radius to make it work. [1, 2, 3, 4, 5, 6]
+`Transition_HullLength` | MultiConnector, connector in hull length.
+`Transition_HullyOffset` | MultiConnector, connector in hull offset.
+`Transition_HullCenter` | MultiConnector, add center connector.
+`Transition_HullCenterHeight` | MultiConnector, center connector height. `default is 2*lengthInHull`
+
+## Transition Support For Angled Pipes
+
+Setting | Description
+-|-
+`Transition_Base_Type` | Include a flat section on the transition to assist with printing `[none, oval, rectangle]`
+`Transition_Base_Thickness` | Support Base Additional Thickness
+`Transition_Base_Width` | Support Base Width. `default is half diameter`
+`Transition_Base_Length` | Support Base Length `Default is 2/3 diameter`
+`Transition_Base_Angle` | Support Base Angle position, `default half of Bend Radius`
+
+## other
+
+Setting | Description
+-|-
+`Enable_Debug_Slice` | Slice model in half to be able to easy see inside
\ No newline at end of file
diff --git a/docs/openscad/hose-adapter/hose-adapter.md b/docs/openscad/hose-adapter/hose-adapter.md
index 244b184..328f8ce 100644
--- a/docs/openscad/hose-adapter/hose-adapter.md
+++ b/docs/openscad/hose-adapter/hose-adapter.md
@@ -1,154 +1,20 @@
---
layout: default
-title: Hose adapters
+title: OpenSCAD Hose adapters
nav_order: 1
has_children: true
-parent: OpenSCAD Projects
permalink: /docs/openscad/hose-adapter
---
+# Connectors
-# Connector 1
-Setting | Description
--|-
-`End1_Wall_Thickness` | Wall thickness
`default=2`
-`End1_Style` | The style of the end
options
- `mag`, Magnetic Flange
- `flange`, Flange
- `hose`, Hose connector
- `dyson`, Dyson connector
-`End1_Measurement` | Is the measurement the adapter's outside or inside diameter?
options- `inner`, Inner adapter measurement
- `outer`, Outer adapter measurement
-`End1_Diameter`| End 1 diameter of the adapter (mm)
-`End1_Length` | Length of the start connector (including the flange).
-`End1_Taper` | Taper of the start connector, use negative to taper other direction.
-
-
-
-# Connector 1 - Hose connector
-Setting | Description
--|-
-`End1_StopThickness` | Thickness of hose stop
-`End1_StopLength` | Length of hose stop
-`End1_Stop_Symmetrical` | Should the stop be tapered both sides.Might easier to print.
-`End1_Barbs_Count` | Number of barbs
-`End1_Barbs_Thickness` | Thickness of the barbs, default is half wall thickness
-`End1_Barbs_Symmetrical` | Should the barbs be tapered both sides. Might be easier to print. [0,1]
-`End1_Hose_EndCap_Diameter` | End Cap Inner Diameter.
-`End1_Hose_EndCap_Thickness` | Thickness of end cap.
-
-# Connector 1 - Flange
-Setting | Description
--|-
-`End1_Flange_Width` | Width of Flange added to the connector diameter
-`End1_Flange_Thickness` | Thickness of the flange
-`End1_Flange_Screw_Position` | Position of the screws added to the connector diameter, 0 = middle of flange
-`End1_Flange_Screw_Border` | Minium amount of the material around the magnets (mm), 0 = End1_Flange_Width / 4
-`End1_Flange_Screw_Count` | Number of Screw holes flange
-`End1_Flange_Screw_Diameter` | The diameter of the screws (mm)
-
+Not all adapters are easy to print so depending on your settings support may be needed
-# Connector 1 - Magnetic Connector
-Setting | Description
--|-
-`End1_Magnets_Count` | Number of magnets in the connector
-`End1_Magnet_Diameter` | The diameter of the magnets (mm)
-`End1_Magnet_Thickness` | The thickness of the magnets (mm)
-`End1_Magnet_Border` | Minium amount of the material around the magnets (mm)
-`End1_Magnet_Flange_Thickness` | Thickness of the magnet flange (mm)
-`End1_Ring` | Include a flange alignment ring `[no: No alignment ring, protruding: protruding ring, recessed: Recessed ring]`
+There are currently 5 types of connectors, each can be use as **connector 1** or **connector 2**
-# Transition
-Setting | Description
--|-
-`Transition_Style` | tapered for hose connections, flat for attaching to a device [flat, taper+bend: Taper then bend, bend+taper: Bend then taper, organicbend: Tapered bend, hull: Hull for multiple end count]
-`Transition_Length` | Length of the transition between the two ends
-`Transition_Bend_Radius` | Radius of transition bend (mm)
-`Transition_Angle` | Angle of bend through the transition section.
-`Transition_xOffset` | X offset for the connector, not supported on taperedbend.
-`Transition_yOffset` | Y offset for the connector, not supported on taperedbend.
+{:.wrap-lightbox width="500"}
-# Transition Multiple connector settings
-Setting | Description
--|-
-`Transition_End2_Count` | Duplicate the second connector. Adjust angle and bend radius to make it work. [1, 2, 3, 4, 5, 6]
-`Transition_HullLength` | MultiConnector, connector in hull length.
-`Transition_HullyOffset` | MultiConnector, connector in hull offset.
-`Transition_HullCenter` | MultiConnector, add center connector.
-`Transition_HullCenterHeight` | MultiConnector, center connector height. `default is 2*lengthInHull`
-
-
-# Transition Support For Angled Pipes
-Setting | Description
--|-
-`Transition_Base_Type` | Include a flat section on the transition to assist with printing `[none, oval, rectangle]`
-`Transition_Base_Thickness` | Support Base Additional Thickness
-`Transition_Base_Width` | Support Base Width. `default is half diameter`
-`Transition_Base_Length` | Support Base Length `Default is 2/3 diameter`
-`Transition_Base_Angle` | Support Base Angle position, `default half of Bend Radius`
-
-# Connector 2
-Setting | Description
--|-
-`End2_Wall_Thickness` | Wall thickness
-`End2_Style` | `[mag: Magnetic Flange, flange: Flange, hose: Hose connector, nozzle: Nozzle attachment]`
-`End2_Measurement` | Is the measurement the adapter's outside or inside diameter? `[inner, outer]`
-`End2_Diameter` | End 2 diameter of the adapter (mm)
-`End2_Length` | Length of the pipe coming out of the flange.
-`End2_Taper` | Taper of the start connector, use negative to taper other direction.
-
-# Connector 2 - Hose connector
-Setting | Description
--|-
-`End2_StopThickness` | Thickness of hose stop
-`End2_StopLength` | Length of hose stop
-`End2_Stop_Symmetrical` | Should the stop be tapered both sides. Might easier to print.
-`End2_Barbs_Count` | Number of barbs
-`End2_Barbs_Thickness` | Thickness of the barbs, default is half wall thickness
-`End2_Barbs_Symmetrical` | Should the barbs be tapered both sides. Might be easier to print. [0,1]
-`End2_Hose_EndCap_Diameter` | End Cap Inner Diameter.
-`End2_Hose_EndCap_Thickness` | Thickness of end cap.
-
-# Connector 2 - Flange
-Setting | Description
--|-
-`End2_Flange_Width` | Width of Flange added to the connector diameter
-`End2_Flange_Thickness` | Thickness of the flange
-`End2_Flange_Screw_Position` | Position of the screws added to the connector diameter, 0 = middle of flange
-`End1_Flange_Width` | Minium amount of the material around the magnets (mm), 0 = / 4
-`End2_Flange_Screw_Border` |
-`End2_Flange_Screw_Count` | Number of Screw holes flange
-`End2_Flange_Screw_Diameter` | The diameter of the screws (mm)
-
-#Connector 2 - Magnetic Flange
-Setting | Description
--|-
-`End2_Magnets_Count` | Number of magnets in the flange
-`End2_Magnet_Diameter` | The diameter of the magnets
-`End2_Magnet_Thickness` | The thickness of the magnets
-`End2_Magnet_Border` | Size of the material around the magnets
-`End2_Magnet_Flange_Thickness` | Inner diameter of the Magnet flange
-`End2_Ring` | Include a flange alignment ring `[no: No alignment ring, protruding: Protruding ring, recessed: Recessed ring]`
-
-# Connector 2 - Nozzle
-Setting | Description
--|-
-`End2_Nozzle_Shape` | `[square, circle]`
-`End2_Nozzle_Square_Width` |
-`End2_Nozzle_Square_Depth` |
-`End2_Nozzle_Tip_Wall_Thickness` |
-`End2_Nozzle_Radius` |
-`End2_Nozzle_Length` |
-`End2_Nozzle_xOffset` |
-`End2_Nozzle_yOffset` |
-`End2_Nozzle_Chamfer_Percentage` |
-`End2_Nozzle_Chamfer_Angle` |
-
-# Alignment Ring
-Setting | Description
--|-
-`Draw_Alignment_Ring` |draw just the alignment ring `default = "no"` `[end1: Draw end 1, end2: Draw end 2, no: Don't draw]`
-`Alignment_Depth` | Alignment depth in to flange (mm)
-`Alignment_Upper_Width` | Alignment upper width at widest part (mm)
-`Alignment_Lower_Width` | Alignment lower width at narrowest part (mm)
-`Alignment_Side_Clearance` | Alignment side clearance, to give nice fit (mm).
-`Alignment Depth Clearance` | to prevent hitting bottom (mm).
+## other
-# other
Setting | Description
-|-
`Enable_Debug_Slice` | Slice model in half to be able to easy see inside
\ No newline at end of file