README.md

IMPORTANT: This repository is currently in maintenance mode.

For a better autocompletion experience with Go, we suggest you use the Go language server, gopls.

If you are looking for a version of gocode that works with Go modules, please see stamblerre/gocode.

---

github.com/mdempsky/gocode

This version of gocode is a fork of the original, which is no longer supported. This fork should work for all versions of Go > 1.8. It only works for $GOPATH projects. For a version of gocode that works with Modules, please see github.com/stamblerre/gocode.

An autocompletion daemon for the Go programming language

Gocode is a helper tool which is intended to be integrated with your source code editor, like vim, neovim and emacs. It provides several advanced capabilities, which currently includes:

• Context-sensitive autocompletion

It is called daemon, because it uses client/server architecture for caching purposes. In particular, it makes autocompletions very fast. Typical autocompletion time with warm cache is 30ms, which is barely noticeable.

Also watch the demo screencast.

Setup

1. You should have a correctly installed Go compiler environment and your personal workspace ($GOPATH). If you have no idea what $GOPATH is, take a look here. Please make sure that your $GOPATH/bin is available in your $PATH. This is important, because most editors assume that gocode binary is available in one of the directories, specified by your $PATH environment variable. Otherwise manually copy the gocode binary from $GOPATH/bin to a location which is part of your $PATH after getting it in step 2.

   Do these steps only if you understand why you need to do them:

   export GOPATH=$HOME/goprojects

   export PATH=$PATH:$GOPATH/bin

2. Then you need to install gocode:

   go get -u github.com/mdempsky/gocode (-u flag for "update")

   Windows users should consider doing this instead:

   go get -u -ldflags -H=windowsgui github.com/mdempsky/gocode

   That way on the Windows OS gocode will be built as a GUI application and doing so solves hanging window issues with some of the editors.

   Note: If you are updating your version of gocode, you will need to run gocode close to restart it.

3. Next steps are editor specific. See below.

Vim setup

Vim manual installation

Note: As of go 1.5 there is no $GOROOT/misc/vim script. Suggested installation is via vim-go plugin.

In order to install vim scripts, you need to fulfill the following steps:

1. Install official Go vim scripts from $GOROOT/misc/vim. If you did that already, proceed to the step 2.

2. Install gocode vim scripts. Usually it's enough to do the following:

   2.1. vim/update.sh

   update.sh script does the following:

   #!/bin/sh
   mkdir -p "$HOME/.vim/autoload"
   mkdir -p "$HOME/.vim/ftplugin/go"
   cp "${0%/*}/autoload/gocomplete.vim" "$HOME/.vim/autoload"
   cp "${0%/*}/ftplugin/go/gocomplete.vim" "$HOME/.vim/ftplugin/go"
   

   2.2. Alternatively, you can create symlinks using symlink.sh script in order to avoid running update.sh after every gocode update.

   symlink.sh script does the following:

   #!/bin/sh
   cd "${0%/*}"
   ROOTDIR=`pwd`
   mkdir -p "$HOME/.vim/autoload"
   mkdir -p "$HOME/.vim/ftplugin/go"
   ln -s "$ROOTDIR/autoload/gocomplete.vim" "$HOME/.vim/autoload/"
   ln -s "$ROOTDIR/ftplugin/go/gocomplete.vim" "$HOME/.vim/ftplugin/go/"
   

3. Make sure vim has filetype plugin enabled. Simply add that to your .vimrc:

   filetype plugin on

4. Autocompletion should work now. Use <C-x><C-o> for autocompletion (omnifunc autocompletion).

Using Vundle in Vim

Add the following line to your .vimrc:

Plugin 'mdempsky/gocode', {'rtp': 'vim/'}

And then update your packages by running :PluginInstall.

Using vim-plug in Vim

Add the following line to your .vimrc:

Plug 'mdempsky/gocode', { 'rtp': 'vim', 'do': '~/.vim/plugged/gocode/vim/symlink.sh' }

And then update your packages by running :PlugInstall.

Other

Alternatively take a look at the vundle/pathogen friendly repo: https://github.com/Blackrush/vim-gocode.

Neovim setup

Neovim manual installation

Neovim users should also follow Vim manual installation, except that you should goto gocode/nvim in step 2, and remember that, the Neovim configuration file is ~/.config/nvim/init.vim.

Using Vundle in Neovim

Add the following line to your init.vim:

Plugin 'mdempsky/gocode', {'rtp': 'nvim/'}

And then update your packages by running :PluginInstall.

Using vim-plug in Neovim

Add the following line to your init.vim:

Plug 'mdempsky/gocode', { 'rtp': 'nvim', 'do': '~/.config/nvim/plugged/gocode/nvim/symlink.sh' }

And then update your packages by running :PlugInstall.

Emacs setup

In order to install emacs script, you need to fulfill the following steps:

1. Install auto-complete-mode

2. Copy emacs/go-autocomplete.el file from the gocode source distribution to a directory which is in your 'load-path' in emacs.

3. Add these lines to your .emacs:

   (require 'go-autocomplete)
   (require 'auto-complete-config)
   (ac-config-default)
   

Also, there is an alternative plugin for emacs using company-mode. See emacs-company/README for installation instructions.

If you're a MacOSX user, you may find that script useful: https://github.com/purcell/exec-path-from-shell. It helps you with setting up the right environment variables as Go and gocode require it. By default it pulls the PATH, but don't forget to add the GOPATH as well, e.g.:

(when (memq window-system '(mac ns))
  (exec-path-from-shell-initialize)
  (exec-path-from-shell-copy-env "GOPATH"))

Sublime Text 3 setup

A plugin for Sublime Text 3 is provided in the subl3 directory of this repository. To install it:

1. Copy the plugin into your Sublime Text 3 Packages directory:

   $ cp -r $GOPATH/src/github.com/mdempsky/gocode/subl3 ~/.config/sublime-text-3/Packages/
   

2. Rename the plugin directory from subl3 to gocode:

   $ mv ~/.config/sublime-text-3/Packages/subl3 ~/.config/sublime-text-3/Packages/gocode
   

3. Open the Command Pallete (Ctrl+Shift+P) and run the Package Control: List Packages command. You should see gocode listed as an active plugin.

Debugging

If something went wrong, the first thing you may want to do is manually start the gocode daemon with a debug mode enabled and in a separate terminal window. It will show you all the stack traces, panics if any and additional info about autocompletion requests. Shutdown the daemon if it was already started and run a new one explicitly with a debug mode enabled:

gocode exit

gocode -s -debug

Please, report bugs, feature suggestions and other rants to the github issue tracker of this project.

Developing

There is Guide for IDE/editor plugin developers.

If you have troubles, please, contact me and I will try to do my best answering your questions. You can contact me via email. Or for short question find me on IRC: #go-nuts @ freenode.

Misc

• It's a good idea to use the latest git version always. I'm trying to keep it in a working state.
• Use go install (not go build) for building a local source tree. The objects in pkg/ are needed for Gocode to work.