Skip to content

Latest commit

 

History

History
2719 lines (1890 loc) · 114 KB

MIGRATION.md

File metadata and controls

2719 lines (1890 loc) · 114 KB
Raw

Migration

From version 6.4.x to 6.5.0

CSF3 auto-title redundant filename

SB 6.4 introduced experimental "auto-title", in which a story's location in the sidebar (aka title) can be automatically inferred from its location on disk. For example, the file atoms/Button.stories.js might result in the title Atoms/Button.

The heuristic failed in the common scenario in which each component gets its own directory, e.g. atoms/Button/Button.stories.js, which would result in the redundant title Atoms/Button/Button. Alternatively, atoms/Button/index.stories.js would result in Atoms/Button/Index.

To address this problem, 6.5 introduces a new heuristic to removes the filename if it matches the directory name (case insensitive) or index. So atoms/Button/Button.stories.js and atoms/Button/index.stories.js would both result in the title Atoms/Button.

Since CSF3 is experimental, we are introducing this technically breaking change in a minor release. If you desire the old structure, you can manually specify the title in file. For example:

// atoms/Button/Button.stories.js
export default { title: 'Atoms/Button/Button' };

From version 6.3.x to 6.4.0

Automigrate

Automigrate is a new 6.4 feature that provides zero-config upgrades to your dependencies, configurations, and story files.

Each automigration analyzes your project, and if it's is applicable, propose a change alongside relevant documentation. If you accept the changes, the automigration will update your files accordingly.

For example, if you're in a webpack5 project but still use Storybook's default webpack4 builder, the automigration can detect this and propose an upgrade. If you opt-in, it will install the webpack5 builder and update your main.js configuration automatically.

You can run the existing suite of automigrations to see which ones apply to your project. This won't update any files unless you accept the changes:

npx sb@next automigrate

The automigration suite also runs when you create a new project (sb init) or when you update storybook (sb upgrade).

CRA5 upgrade

Storybook 6.3 supports CRA5 out of the box when you install it fresh. However, if you're upgrading your project from a previous version, you'll need to upgrade the configuration. You can do this automatically by running:

npx sb@next automigrate

Or you can do the following steps manually to force Storybook to use webpack 5 for building your project:

yarn add @storybook/builder-webpack5 @storybook/manager-webpack5 --dev
# Or
npm install @storybook/builder-webpack5 @storybook/manager-webpack5 --save-dev

Then edit your .storybook/main.js config:

module.exports = {
  core: {
    builder: 'webpack5',
  },
};

CSF3 enabled

SB6.3 introduced a feature flag, features.previewCsfV3, to opt-in to experimental CSF3 syntax support. In SB6.4, CSF3 is supported regardless of previewCsfV3's value. This should be a fully backwards-compatible change. The previewCsfV3 flag has been deprecated and will be removed in SB7.0.

Optional titles

In SB6.3 and earlier, component titles were required in CSF default exports. Starting in 6.4, they are optional. If you don't specify a component file, it will be inferred from the file's location on disk.

Consider a project configuration /path/to/project/.storybook/main.js containing:

module.exports = { stories: ['../src/**/*.stories.*'] };

And the file /path/to/project/src/components/Button.stories.tsx containing the default export:

import { Button } from './Button';
export default { component: Button };
// named exports...

The inferred title of this file will be components/Button based on the stories glob in the configuration file. We will provide more documentation soon on how to configure this.

String literal titles

Starting in 6.4 CSF component titles are optional. However, if you do specify titles, title handing is becoming more strict in V7 and is limited to string literals.

Earlier versions of Storybook supported story titles that are dynamic Javascript expressions

// ✅ string literals 6.3 OK / 7.0 OK
export default {
  title: 'Components/Atoms/Button',
};

// ✅ undefined 6.3 OK / 7.0 OK
export default {
  component: Button,
};

// ❌ expressions: 6.3 OK / 7.0 KO
export default {
  title: foo('bar'),
};

// ❌ template literals 6.3 OK / 7.0 KO
export default {
  title: `${bar}`,
};

StoryObj type

The TypeScript type for CSF3 story objects is StoryObj, and this will become the default in Storybook 7.0. In 6.x, the StoryFn type is the default, and Story is aliased to StoryFn.

If you are migrating to experimental CSF3, the following is compatible with 6.4 and requires the least amount of change to your code today:

// CSF2 function stories, current API, will break in 7.0
import type { Story } from '@storybook/<framework>';

// CSF3 object stories, will persist in 7.0
import type { StoryObj } from '@storybook/<framework>';

The following is compatible with 6.4 and also forward-compatible with anticipated 7.0 changes:

// CSF2 function stories, forward-compatible mode
import type { StoryFn } from '@storybook/<framework>';

// CSF3 object stories, using future 7.0 types
import type { Story } from '@storybook/<framework>/types-7-0';

Story Store v7

SB6.4 introduces an opt-in feature flag, features.storyStoreV7, which loads stories in an "on demand" way (that is when rendered), rather than up front when the Storybook is booted. This way of operating will become the default in 7.0 and will likely be switched to opt-out in that version.

The key benefit of the on demand store is that stories are code-split automatically (in builder-webpack4 and builder-webpack5), which allows for much smaller bundle sizes, faster rendering, and improved general performance via various opt-in Webpack features.

The on-demand store relies on the "story index" data structure which is generated in the server (node) via static code analysis. As such, it has the following limitations:

  • Does not work with storiesOf()
  • Does not work if you use dynamic story names or component titles.

However, the autoTitle feature is supported.

Behavioral differences

The key behavioral differences of the v7 store are:

  • SET_STORIES is not emitted on boot up. Instead the manager loads the story index independently.
  • A new event STORY_PREPARED is emitted when a story is rendered for the first time, which contains metadata about the story, such as parameters.
  • All "entire" store APIs such as extract() need to be proceeded by an async call to loadAllCSFFiles() which fetches all CSF files and processes them.

Main.js framework field

In earlier versions of Storybook, each framework package (e.g. @storybook/react) provided its own start-storybook and build-storybook binaries, which automatically filled in various settings.

In 7.0, we're moving towards a model where the user specifies their framework in main.js.

module.exports = {
  // ... your existing config
  framework: '@storybook/react', // OR whatever framework you're using
};

Each framework must export a renderToDOM function and parameters.framework. We'll be adding more documentation for framework authors in a future release.

Using the v7 store

To activate the v7 mode set the feature flag in your .storybook/main.js config:

module.exports = {
  // ... your existing config
  framework: '@storybook/react', // OR whatever framework you're using
  features: {
    storyStoreV7: true,
  },
};

NOTE: features.storyStoreV7 implies features.buildStoriesJson and has the same limitations.

v7-style story sort

If you've written a custom storySort function, you'll need to rewrite it for V7.

SB6.x supports a global story function specified in .storybook/preview.js. It accepts two arrays which each contain:

  • The story ID
  • A story object that contains the name, title, etc.
  • The component's parameters
  • The project-level parameters

SB 7.0 streamlines the story function. It now accepts a StoryIndexEntry which is an object that contains only the story's id, title, name, and importPath.

Consider the following example, before and after:

// v6-style sort
function storySort(a, b) {
  return a[1].kind === b[1].kind
    ? 0
    : a[1].id.localeCompare(b[1].id, undefined, { numeric: true });
},

And the after version using title instead of kind and not receiving the full parameters:

// v7-style sort
function storySort(a, b) {
  return a.title === b.title
    ? 0
    : a.id.localeCompare(b.id, undefined, { numeric: true });
},

v7 Store API changes for addon authors

The Story Store in v7 mode is async, so synchronous story loading APIs no longer work. In particular:

  • store.fromId() has been replaced by store.loadStory(), which is async (i.e. returns a Promise you will need to await).
  • store.raw()/store.extract() and friends that list all stories require a prior call to store.cacheAllCSFFiles() (which is async). This will load all stories, and isn't generally a good idea in an addon, as it will force the whole store to load.

Storyshots compatibility in the v7 store

Storyshots is not currently compatible with the v7 store. However, you can use the following workaround to opt-out of the v7 store when running storyshots; in your main.js:

module.exports = {
  features: {
    storyStoreV7: !global.navigator?.userAgent?.match?.('jsdom'),
  },
};

There are some caveats with the above approach:

  • The code path in the v6 store is different to the v7 store and your mileage may vary in identical behavior. Buyer beware.
  • The story sort API changed between the stores. If you are using a custom story sort function, you will need to ensure it works in both contexts (perhaps using the check global.navigator.userAgent.match('jsdom')).

Emotion11 quasi-compatibility

Now that the web is moving to Emotion 11 for styling, popular libraries like MUI5 and ChakraUI are breaking with Storybook 6.3 which only supports emotion@10.

Unfortunately we're unable to upgrade Storybook to Emotion 11 without a semver major release, and we're not ready for that. So, as a workaround, we've created a feature flag which opts-out of the previous behavior of pinning the Emotion version to v10. To enable this workaround, add the following to your .storybook/main.js config:

module.exports = {
  features: {
    emotionAlias: false,
  },
};

Setting this should unlock theming for emotion11-based libraries in Storybook 6.4.

Babel mode v7

SB6.4 introduces an opt-in feature flag, features.babelModeV7, that reworks the way Babel is configured in Storybook to make it more consistent with the Babel is configured in your app. This breaking change will become the default in SB 7.0, but we encourage you to migrate today.

NOTE: CRA apps using @storybook/preset-create-react-app use CRA's handling, so the new flag has no effect on CRA apps.

In SB6.x and earlier, Storybook provided its own default configuration and inconsistently handled configurations from the user's babelrc file. This resulted in a final configuration that differs from your application's configuration AND is difficult to debug.

In babelModeV7, Storybook no longer provides its own default configuration and is primarily configured via babelrc file, with small, incremental updates from Storybook addons.

In 6.x, Storybook supported a .storybook/babelrc configuration option. This is no longer supported and it's up to you to reconcile this with your project babelrc.

To activate the v7 mode set the feature flag in your .storybook/main.js config:

module.exports = {
  // ... your existing config
  features: {
    babelModeV7: true,
  },
};

In the new mode, Storybook expects you to provide a configuration file. If you want a configuration file that's equivalent to the 6.x default, you can run the following command in your project directory:

npx sb@next babelrc

This will create a .babelrc.json file. This file includes a bunch of babel plugins, so you may need to add new package devDependencies accordingly.

Loader behavior with args changes

In 6.4 the behavior of loaders when arg changes occurred was tweaked so loaders do not re-run. Instead the previous value of the loader is passed to the story, irrespective of the new args.

6.4 Angular changes

SB Angular builder

Since SB6.3, Storybook for Angular supports a builder configuration in your project's angular.json. This provides an Angular-style configuration for running and building your Storybook. The full builder documentation will be shown in the main documentation page soon, but for now you can check out an example here:

Angular13

Angular 13 introduces breaking changes that require updating your Storybook configuration if you are migrating from a previous version of Angular.

Most notably, the documented way of including global styles is no longer supported by Angular13. Previously you could write the following in your .storybook/preview.js config:

import '!style-loader!css-loader!sass-loader!./styles.scss';

If you use Angular 13 and above, you should use the builder configuration instead:

   "my-default-project": {
      "architect": {
        "build": {
          "builder": "@angular-devkit/build-angular:browser",
          "options": {
            "styles": ["src/styles.css", "src/styles.scss"],
          }
        }
      },
   },

If you need storybook-specific styles separate from your app, you can configure the styles in the SB Angular builder, which completely overrides your project's styles:

      "storybook": {
        "builder": "@storybook/angular:start-storybook",
        "options": {
          "browserTarget": "my-default-project:build",
          "styles": [".storybook/custom-styles.scss"],
        },
      }

Angular component parameter removed

In SB6.3 and earlier, the default.component metadata was implemented as a parameter, meaning that stories could set parameters.component to override the default export. This was an internal implementation that was never documented, but it was mistakenly used in some Angular examples.

If you have Angular stories of the form:

export const MyStory = () => ({ ... })
SomeStory.parameters = { component: MyComponent };

You should rewrite them as:

export const MyStory = () => ({ component: MyComponent, ... })

More discussion here.

6.4 deprecations

Deprecated --static-dir CLI flag

In 6.4 we've replaced the --static-dir CLI flag with the the staticDirs field in .storybook/main.js. Note that the CLI directories are relative to the current working directory, whereas the staticDirs are relative to the location of main.js.

Before:

start-storybook --static-dir ./public,./static,./foo/assets:/assets

After:

// .storybook/main.js
module.exports = {
  staticDirs: ['../public', '../static', { from: '../foo/assets', to: '/assets' }],
};

The --static-dir flag has been deprecated and will be removed in Storybook 7.0.

From version 6.2.x to 6.3.0

Webpack 5

Storybook 6.3 brings opt-in support for building both your project and the manager UI with webpack 5. To do so:

yarn add @storybook/builder-webpack5 @storybook/manager-webpack5 --dev
# Or
npm install @storybook/builder-webpack5 @storybook/manager-webpack5 --save-dev

Then edit your .storybook/main.js config:

module.exports = {
  core: {
    builder: 'webpack5',
  },
};

NOTE: If you're using @storybook/preset-create-react-app make sure to update it to version 4.0.0 as well.

Fixing hoisting issues

Webpack 5 manager build

Storybook 6.2 introduced experimental webpack5 support for building user components. Storybook 6.3 also supports building the manager UI in webpack 5 to avoid strange hoisting issues.

If you're upgrading from 6.2 and already using the experimental webpack5 feature, this might be a breaking change (hence the 'experimental' label) and you should try adding the manager builder:

yarn add @storybook/manager-webpack5 --dev
# Or
npm install @storybook/manager-webpack5 --save-dev
Wrong webpack version

Because Storybook uses webpack@4 as the default, it's possible for the wrong version of webpack to get hoisted by your package manager. If you receive an error that looks like you might be using the wrong version of webpack, install webpack@5 explicitly as a dev dependency to force it to be hoisted:

yarn add webpack@5 --dev
# Or
npm install webpack@5 --save-dev

Alternatively or additionally you might need to add a resolution to your package.json to ensure that a consistent webpack version is provided across all of storybook packages. Replacing the {app} with the app (react, vue, etc.) that you're using:

// package.json
...
resolutions: {
  "@storybook/{app}/webpack": "^5"
}
...

Angular 12 upgrade

Storybook 6.3 supports Angular 12 out of the box when you install it fresh. However, if you're upgrading your project from a previous version, you'll need to follow the steps for opting-in to webpack 5.

Lit support

Storybook 6.3 introduces Lit 2 support in a non-breaking way to ease migration from lit-html/lit-element to lit.

To do so, it relies on helpers added in the latest minor versions of lit-html/lit-element. So when upgrading to Storybook 6.3, please ensure your project is using lit-html 1.4.x or lit-element 2.5.x.

According to the package manager you are using, it can be handled automatically when updating Storybook or can require to manually update the versions and regenerate the lockfile.

No longer inferring default values of args

Previously, unset args were set to the argType.defaultValue if set or inferred from the component's prop types (etc.). In 6.3 we no longer infer default values and instead set arg values to undefined when unset, allowing the framework to supply the default value.

If you were using argType.defaultValue to fix issues with the above inference, it should no longer be necessary, you can remove that code.

If you were using argType.defaultValue or relying on inference to set a default value for an arg, you should now set a value for the arg at the component level:

export default {
  component: MyComponent,
  args: {
    argName: 'default-value',
  },
};

To manually configure the value that is shown in the ArgsTable doc block, you can configure the table.defaultValue setting:

export default {
  component: MyComponent,
  argTypes: {
    argName: {
      table: { defaultValue: { summary: 'SomeType<T>' } },
    },
  },
};

6.3 deprecations

Deprecated addon-knobs

We are replacing @storybook/addon-knobs with @storybook/addon-controls.

Deprecated scoped blocks imports

In 6.3, we changed doc block imports from @storybook/addon-docs/blocks to @storybook/addon-docs. This makes it possible for bundlers to automatically choose the ESM or CJS version of the library depending on the context.

To update your code, you should be able to global replace @storybook/addon-docs/blocks with @storybook/addon-docs. Example:

// before
import { Meta, Story } from '@storybook/addon-docs/blocks';

// after
import { Meta, Story } from '@storybook/addon-docs';

Deprecated layout URL params

Several URL params to control the manager layout have been deprecated and will be removed in 7.0:

  • addons=0: use panel=false instead
  • panelRight=1: use panel=right instead
  • stories=0: use nav=false instead

Additionally, support for legacy URLs using selectedKind and selectedStory will be removed in 7.0. Use path instead.

From version 6.1.x to 6.2.0

MDX pattern tweaked

In 6.2 files ending in stories.mdx or story.mdx are now processed with Storybook's MDX compiler. Previously it only applied to files ending in .stories.mdx or .story.mdx. See more here: #13996.

6.2 Angular overhaul

New Angular storyshots format

We've updated the Angular storyshots format in 6.2, which is technically a breaking change. Apologies to semver purists: if you're using storyshots, you'll need to update your snapshots.

The new format hides the implementation details of @storybook/angular so that we can evolve its renderer without breaking your snapshots in the future.

Deprecated Angular story component

Storybook 6.2 for Angular uses parameters.component as the preferred way to specify your stories' components. The previous method, in which the component was a return value of the story, has been deprecated.

Consider the existing story from 6.1 or earlier:

export default { title: 'Button' };
export const Basic = () => ({
  component: Button,
  props: { label: 'Label' },
});

From 6.2 this should be rewritten as:

export default { title: 'Button', component: Button };
export const Basic = () => ({
  props: { label: 'Label' },
});

The new convention is consistent with how other frameworks and addons work in Storybook. The old way will be supported until 7.0. For a full discussion see storybookjs#8673.

New Angular renderer

We've rewritten the Angular renderer in Storybook 6.2. It's meant to be entirely backwards compatible, but if you need to use the legacy renderer it's still available via a parameter. To opt out of the new renderer, add the following to .storybook/preview.ts:

export const parameters = {
  angularLegacyRendering: true,
};

Please also file an issue if you need to opt out. We plan to remove the legacy renderer in 7.0.

Components without selectors

When the new Angular renderer is used, all Angular Story components must either have a selector, or be added to the entryComponents array of the story's moduleMetadata. If the component has any Inputs or Outputs to be controlled with args, a selector should be added.

Packages now available as ESModules

Many Storybook packages are now available as ESModules in addition to CommonJS. If your jest tests stop working, this is likely why. One common culprit is doc blocks, which is fixed in 6.3. In 6.2, you can configure jest to transform the packages like so (more info):

// In your jest config
transformIgnorePatterns: ['/node_modules/(?!@storybook)']

6.2 Deprecations

Deprecated implicit PostCSS loader

Previously, @storybook/core would automatically add the postcss-loader to your preview. This caused issues for consumers when PostCSS upgraded to v8 and tools, like Autoprefixer and Tailwind, starting requiring the new version. Implicitly adding postcss-loader will be removed in Storybook 7.0.

Instead of continuing to include PostCSS inside the core library, it has been moved to @storybook/addon-postcss. This addon provides more fine-grained customization and will be upgraded more flexibly to track PostCSS upgrades.

If you require PostCSS support, please install @storybook/addon-postcss in your project, add it to your list of addons inside .storybook/main.js, and configure a postcss.config.js file.

Further information is available at storybookjs#12668 and storybookjs#13669.

If you're not using Postcss and you don't want to see the warning, you can disable it by adding the following to your .storybook/main.js:

module.exports = {
  features: {
    postcss: false,
  },
};

Deprecated default PostCSS plugins

When relying on the implicit PostCSS loader, it would also add autoprefixer v9 and postcss-flexbugs-fixes v4 plugins to the postcss-loader configuration when you didn't have a PostCSS config file (such as postcss.config.js) within your project.

They will no longer be applied when switching to @storybook/addon-postcss and the implicit PostCSS features will be removed in Storybook 7.0.

If you depend upon these plugins being applied, install them and create a postcss.config.js file within your project that contains:

module.exports = {
  plugins: [
    require('postcss-flexbugs-fixes'),
    require('autoprefixer')({
      flexbox: 'no-2009',
    }),
  ],
};

Deprecated showRoots config option

Config options for the sidebar are now under the sidebar namespace. The showRoots option should be set as follows:

addons.setConfig({
  sidebar: {
    showRoots: false,
  },
  // showRoots: false   <- this is deprecated
});

The top-level showRoots option will be removed in Storybook 7.0.

Deprecated control.options

Possible options for a radio/check/select controls has been moved up to the argType level, and no longer accepts an object. Instead, you should specify options as an array. You can use control.labels to customize labels. Additionally, you can use a mapping to deal with complex values.

argTypes: {
  answer:
    options: ['yes', 'no'],
    mapping: {
      yes: <Check />,
      no: <Cross />,
    },
    control: {
      type: 'radio',
      labels: {
        yes: 'да',
        no: 'нет',
      }
    }
  }
}

Keys in control.labels as well as in mapping should match the values in options. Neither object has to be exhaustive, in case of a missing property, the option value will be used directly.

If you are currently using an object as value for control.options, be aware that the key and value are reversed in control.labels.

Deprecated storybook components html entry point

Storybook HTML components are now exported directly from '@storybook/components' for better ESM and Typescript compatibility. The old entry point will be removed in SB 7.0.

// before
import { components } from '@storybook/components/html';

// after
import { components } from '@storybook/components';

From version 6.0.x to 6.1.0

Addon-backgrounds preset

In 6.1 we introduced an unintentional breaking change to addon-backgrounds.

The addon uses decorators which are set up automatically by a preset. The required preset is ignored if you register the addon in main.js with the /register entry point. This used to be valid in v6.0.x and earlier:

module.exports = {
  stories: ['../**/*.stories.js'],
  addons: ['@storybook/addon-backgrounds/register'],
};

To fix it, just replace @storybook/addon-backgrounds/register with @storybook/addon-backgrounds:

module.exports = {
  stories: ['../**/*.stories.js'],
  addons: ['@storybook/addon-backgrounds'],
};

Single story hoisting

Stories which have no siblings (i.e. the component has only one story) and which name exactly matches the component name will now be hoisted up to replace their parent component in the sidebar. This means you can have a hierarchy like this:

DESIGN SYSTEM   [root]
- Atoms         [group]
  - Button      [component]
    - Button    [story]
  - Checkbox    [component]
    - Checkbox  [story]

This will then be visually presented in the sidebar like this:

DESIGN SYSTEM   [root]
- Atoms         [group]
  - Button      [story]
  - Checkbox    [story]

See Naming components and hierarchy for details.

React peer dependencies

Starting in 6.1, react and react-dom are required peer dependencies of @storybook/react, meaning that if your React project does not have dependencies on them, you need to add them as devDependencies. If you don't you'll see errors like this:

Error: Cannot find module 'react-dom/package.json'

They were also peer dependencies in earlier versions, but due to the package structure they would be installed by Storybook if they were not required by the user's project. For more discussion: storybookjs#13269

6.1 deprecations

Deprecated DLL flags

Earlier versions of Storybook used Webpack DLLs as a performance crutch. In 6.1, we've removed Storybook's built-in DLLs and have deprecated the command-line parameters --no-dll and --ui-dll. They will be removed in 7.0.

Deprecated storyFn

Each item in the story store contains a field called storyFn, which is a fully decorated story that's applied to the denormalized story parameters. Starting in 6.0 we've stopped using this API internally, and have replaced it with a new field called unboundStoryFn which, unlike storyFn, must passed a story context, typically produced by applyLoaders;

Before:

const { storyFn } = store.fromId('some--id');
console.log(storyFn());

After:

const { unboundStoryFn, applyLoaders } = store.fromId('some--id');
const context = await applyLoaders();
console.log(unboundStoryFn(context));

If you're not using loaders, storyFn will work as before. If you are, you'll need to use the new approach.

NOTE: If you're using @storybook/addon-docs, this deprecation warning is triggered by the Docs tab in 6.1. It's safe to ignore and we will be providing a proper fix in a future release. You can track the issue at storybookjs#13074.

Deprecated onBeforeRender

The @storybook/addon-docs previously accepted a jsx option called onBeforeRender, which was unfortunately named as it was called after the render.

We've renamed it transformSource and also allowed it to receive the StoryContext in case source rendering requires additional information.

Deprecated grid parameter

Previously when using @storybook/addon-backgrounds if you wanted to customize the grid, you would define a parameter like this:

export const Basic = () => <Button />
Basic.parameters: {
  grid: {
    cellSize: 10
  }
},

As grid is not an addon, but rather backgrounds is, the grid configuration was moved to be inside backgrounds parameter instead. Also, there are new properties that can be used to further customize the grid. Here's an example with the default values:

export const Basic = () => <Button />
Basic.parameters: {
  backgrounds: {
    grid: {
      disable: false,
      cellSize: 20,
      opacity: 0.5,
      cellAmount: 5,
      offsetX: 16, // default is 0 if story has 'fullscreen' layout, 16 if layout is 'padded'
      offsetY: 16, // default is 0 if story has 'fullscreen' layout, 16 if layout is 'padded'
    }
  }
},

Deprecated package-composition disabled parameter

Like Deprecated disabled parameter. The disabled parameter has been deprecated, please use disable instead.

For more information, see the the related documentation.

From version 5.3.x to 6.0.x

Hoisted CSF annotations

Storybook 6 introduces hoisted CSF annotations and deprecates the StoryFn.story object-style annotation.

In 5.x CSF, you would annotate a story like this:

export const Basic = () => <Button />
Basic.story = {
  name: 'foo',
  parameters: { ... },
  decorators: [ ... ],
};

In 6.0 CSF this becomes:

export const Basic = () => <Button />
Basic.storyName = 'foo';
Basic.parameters = { ... };
Basic.decorators = [ ... ];
  1. The new syntax is slightly more compact/ergonomic compared the the old one
  2. Similar to React's displayName, propTypes, defaultProps annotations
  3. We're introducing a new feature, Storybook Args, where the new syntax will be significantly more ergonomic

To help you upgrade your stories, we've created a codemod:

npx @storybook/cli@next migrate csf-hoist-story-annotations --glob="**/*.stories.js"

For more information, see the documentation.

Zero config typescript

Storybook has built-in Typescript support in 6.0. That means you should remove your complex Typescript configurations from your .storybook config. We've tried to pick sensible defaults that work out of the box, especially for nice prop table generation in @storybook/addon-docs.

To migrate from an old setup, we recommend deleting any typescript-specific webpack/babel configurations in your project. You should also remove @storybook/preset-typescript, which is superceded by the built-in configuration.

If you want to override the defaults, see the typescript configuration docs.

Correct globs in main.js

In 5.3 we introduced the main.js file with a stories property. This property was documented as a "glob" pattern. This was our intention, however the implementation allowed for non valid globs to be specified and work. In fact, we promoted invalid globs in our documentation and CLI templates.

We've corrected this, the CLI templates have been changed to use valid globs.

We've also changed the code that resolves these globs, so that invalid globs will log a warning. They will break in the future, so if you see this warning, please ensure you're specifying a valid glob.

Example of an invalid glob:

stories: ['./**/*.stories.(ts|js)']

Example of a valid glob:

stories: ['./**/*.stories.@(ts|js)']

CRA preset removed

The built-in create-react-app preset, which was previously deprecated, has been fully removed.

If you're using CRA and migrating from an earlier Storybook version, please install @storybook/preset-create-react-app if you haven't already.

Core-JS dependency errors

Some users have experienced core-js dependency errors when upgrading to 6.0, such as:

Module not found: Error: Can't resolve 'core-js/modules/web.dom-collections.iterator'

We think this comes from having multiple versions of core-js installed, but haven't isolated a good solution (see #11255 for discussion).

For now, the workaround is to install core-js directly in your project as a dev dependency:

npm install core-js@^3.0.1 --save-dev

Args passed as first argument to story

Starting in 6.0, the first argument to a story function is an Args object. In 5.3 and earlier, the first argument was a StoryContext, and that context is now passed as the second argument by default.

This breaking change only affects you if your stories actually use the context, which is not common. If you have any stories that use the context, you can either (1) update your stories, or (2) set a flag to opt-out of new behavior.

Consider the following story that uses the context:

export const Dummy = ({ parameters }) => <div>{JSON.stringify(parameters)}</div>;

Here's an updated story for 6.0 that ignores the args object:

export const Dummy = (_args, { parameters }) => <div>{JSON.stringify(parameters)}</div>;

Alternatively, if you want to opt out of the new behavior, you can add the following to your .storybook/preview.js config:

export const parameters = {
  passArgsFirst: false,
};

6.0 Docs breaking changes

Remove framework-specific docs presets

In SB 5.2, each framework had its own preset, e.g. @storybook/addon-docs/react/preset. In 5.3 we unified this into a single preset: @storybook/addon-docs/preset. In 6.0 we've removed the deprecated preset.

Preview/Props renamed

In 6.0 we renamed Preview to Canvas, Props to ArgsTable. The change should be otherwise backwards-compatible.

Docs theme separated

In 6.0, you should theme Storybook Docs with the docs.theme parameter.

In 5.x, the Storybook UI and Storybook Docs were themed using the same theme object. However, in 5.3 we introduced a new API, addons.setConfig, which improved UI theming but broke Docs theming. Rather than trying to keep the two unified, we introduced a separate theming mechanism for docs, docs.theme. Read about Docs theming here.

DocsPage slots removed

In SB5.2, we introduced the concept of DocsPage slots for customizing the DocsPage.

In 5.3, we introduced docs.x story parameters like docs.prepareForInline which get filled in by frameworks and can also be overwritten by users, which is a more natural/convenient way to make global customizations.

We also introduced Custom DocsPage, which makes it possible to add/remove/update DocBlocks on the page.

These mechanisms are superior to slots, so we've removed slots in 6.0. For each slot, we provide a migration path here:

Slot Slot function Replacement
Title titleSlot Custom DocsPage
Subtitle subtitleSlot Custom DocsPage
Description descriptionSlot docs.extractComponentDescription parameter
Primary primarySlot Custom DocsPage
Props propsSlot docs.extractProps parameter
Stories storiesSlot Custom DocsPage

React prop tables with Typescript

Props handling in React has changed in 6.0 and should be much less error-prone. This is not a breaking change per se, but documenting the change here since this is an area that has a lot of issues and we've gone back and forth on it.

Starting in 6.0, we have zero-config typescript support. The out-of-box experience should be much better now, since the default configuration is designed to work well with addon-docs.

There are also two typescript handling options that can be set in .storybook/main.js. react-docgen-typescript (default) and react-docgen. This is discussed in detail in the docs.

ConfigureJSX true by default in React

In SB 6.0, the Storybook Docs preset option configureJSX is now set to true for all React projects. It was previously false by default for React only in 5.x). This configureJSX option adds @babel/plugin-transform-react-jsx, to process the output of the MDX compiler, which should be a safe change for all projects.

If you need to restore the old JSX handling behavior, you can configure .storybook/main.js:

module.exports = {
  addons: [
    {
      name: '@storybook/addon-docs',
      options: { configureJSX: false },
    },
  ],
};

User babelrc disabled by default in MDX

In SB 6.0, the Storybook Docs no longer applies the user's babelrc by default when processing MDX files. It caused lots of hard-to-diagnose bugs.

To restore the old behavior, or pass any MDX-specific babel options, you can configure .storybook/main.js:

module.exports = {
  addons: [
    {
      name: '@storybook/addon-docs',
      options: { mdxBabelOptions: { babelrc: true, configFile: true } },
    },
  ],
};

Docs description parameter

In 6.0, you can customize a component description using the docs.description.component parameter, and a story description using docs.description.story parameter.

Example:

import { Button } from './Button';

export default {
  title: 'Button'
  parameters: { docs: { description: { component: 'some component **markdown**' }}}
}

export const Basic = () => <Button />
Basic.parameters = { docs: { description: { story: 'some story **markdown**' }}}

In 5.3 you customized a story description with the docs.storyDescription parameter. This has been deprecated, and support will be removed in 7.0.

6.0 Inline stories

The following frameworks now render stories inline on the Docs tab by default, rather than in an iframe: react, vue, web-components, html.

To disable inline rendering, set the docs.inlineStories parameter to false.

New addon presets

In Storybook 5.3 we introduced a declarative main.js configuration, which is now the recommended way to configure Storybook. Part of the change is a simplified syntax for registering addons, which in 6.0 automatically registers many addons using a preset, which is a slightly different behavior than in earlier versions.

This breaking change currently applies to: addon-a11y, addon-actions, addon-knobs, addon-links, addon-queryparams.

Consider the following main.js config for addon-knobs:

module.exports = {
  stories: ['../**/*.stories.js'],
  addons: ['@storybook/addon-knobs'],
};

In earlier versions of Storybook, this would automatically call @storybook/addon-knobs/register, which adds the the knobs panel to the Storybook UI. As a user you would also add a decorator:

import { withKnobs } from '../index';

addDecorator(withKnobs);

Now in 6.0, addon-knobs comes with a preset, @storybook/addon-knobs/preset, that does this automatically for you. This change simplifies configuration, since now you don't need to add that decorator.

If you wish to disable this new behavior, you can modify your main.js to force it to use the register logic rather than the preset:

module.exports = {
  stories: ['../**/*.stories.js'],
  addons: ['@storybook/addon-knobs/register'],
};

If you wish to selectively disable knobs checks for a subset of stories, you can control this with story parameters:

export const MyNonCheckedStory = () => <SomeComponent />;
MyNonCheckedStory.story = {
  parameters: {
    knobs: { disable: true },
  },
};

Removed babel-preset-vue from Vue preset

babel-preset-vue is not included by default anymore when using Storybook with Vue. This preset is outdated and caused problems with more modern setups.

If you have an older Vue setup that relied on this preset, make sure it is included in your babel config (install babel-preset-vue and add it to the presets).

{
  "presets": ["babel-preset-vue"]
}

However, please take a moment to review why this preset is necessary in your setup. One usecase used to be to enable JSX in your stories. For this case, we recommend to use @vue/babel-preset-jsx instead.

Removed Deprecated APIs

In 6.0 we removed a number of APIs that were previously deprecated.

See the migration guides for further details:

New setStories event

The setStories/SET_STORIES event has changed and now denormalizes global and kind-level parameters. The new format of the event data is:

{
  globalParameters: { p: 'q' },
  kindParameters: { kind: { p: 'q' } },
  stories: /* as before but with only story-level parameters */
}

If you want the full denormalized parameters for a story, you can do something like:

import { combineParameters } from '@storybook/api';

const story = data.stories[storyId];
const parameters = combineParameters(
  data.globalParameters,
  data.kindParameters[story.kind],
  story.parameters
);

Removed renderCurrentStory event

The story store no longer emits renderCurrentStory/RENDER_CURRENT_STORY to tell the renderer to render the story. Instead it emits a new declarative CURRENT_STORY_WAS_SET (in response to the existing SET_CURRENT_STORY) which is used to decide to render.

Removed hierarchy separators

We've removed the ability to specify the hierarchy separators (how you control the grouping of story kinds in the sidebar). From Storybook 6.0 we have a single separator /, which cannot be configured.

If you are currently using custom separators, we encourage you to migrate to using / as the sole separator. If you are using | or . as a separator currently, we provide a codemod, upgrade-hierarchy-separators, that can be used to rename your components. Note: the codemod will not work for .mdx components, you will need to make the changes by hand.

npx sb@next migrate upgrade-hierarchy-separators --glob="*/**/*.stories.@(tsx|jsx|ts|js)"

We also now default to showing "roots", which are non-expandable groupings in the sidebar for the top-level groups. If you'd like to disable this, set the showRoots option in .storybook/manager.js:

import { addons } from '@storybook/addons';

addons.setConfig({
  showRoots: false,
});

No longer pass denormalized parameters to storySort

The storySort function (set via the parameters.options.storySort parameter) previously compared two entries [storyId, storeItem], where storeItem included the full "denormalized" set of parameters of the story (i.e. the global, kind and story parameters that applied to that story).

For performance reasons, we now store the parameters uncombined, and so pass the format: [storyId, storeItem, kindParameters, globalParameters].

Client API changes

Removed Legacy Story APIs

In 6.0 we removed a set of APIs from the underlying StoryStore (which wasn't publicly accessible):

  • getStories, getStoryFileName, getStoryAndParameters, getStory, getStoryWithContext, hasStoryKind, hasStory, dumpStoryBook, size, clean

Although these were private APIs, if you were using them, you could probably use the newer APIs (which are still private): getStoriesForKind, getRawStory, removeStoryKind, remove.

Can no longer add decorators/parameters after stories

You can no longer add decorators and parameters globally after you added your first story, and you can no longer add decorators and parameters to a kind after you've added your first story to it.

It's unclear and confusing what would happened if you did. If you want to disable a decorator for certain stories, use a parameter to do so:

export StoryOne = ...;
StoryOne.story = { parameters: { addon: { disable: true } } };

If you want to use a parameter for a subset of stories in a kind, simply use a variable to do so:

const commonParameters = { x: { y: 'z' } };
export StoryOne = ...;
StoryOne.story = { parameters: { ...commonParameters, other: 'things' } };

NOTE: also the use of addParameters and addDecorator at arbitrary points is also deprecated, see the deprecation warning.

Changed Parameter Handling

There have been a few rationalizations of parameter handling in 6.0 to make things more predictable and fit better with the intention of parameters:

All parameters are now merged recursively to arbitrary depth.

In 5.3 we sometimes merged parameters all the way down and sometimes did not depending on where you added them. It was confusing. If you were relying on this behaviour, let us know.

Array parameters are no longer "merged".

If you override an array parameter, the override will be the end product. If you want the old behaviour (appending a new value to an array parameter), export the original and use array spread. This will give you maximum flexibility:

import { allBackgrounds } from './util/allBackgrounds';

export StoryOne = ...;
StoryOne.story = { parameters: { backgrounds: [...allBackgrounds, '#zyx' ] } };

You cannot set parameters from decorators

Parameters are intended to be statically set at story load time. So setting them via a decorator doesn't quite make sense. If you were using this to control the rendering of a story, chances are using the new args feature is a more idiomatic way to do this.

You can only set storySort globally

If you want to change the ordering of stories, use export const parameters = { options: { storySort: ... } } in preview.js.

Simplified Render Context

The RenderContext that is passed to framework rendering layers in order to render a story has been simplified, dropping a few members that were not used by frameworks to render stories. In particular, the following have been removed:

  • selectedKind/selectedStory -- replaced by kind/name
  • configApi
  • storyStore
  • channel
  • clientApi

Story Store immutable outside of configuration

You can no longer change the contents of the StoryStore outside of a configure() call. This is to ensure that any changes are properly published to the manager. If you want to add stories "out of band" you can call store.startConfiguring() and store.finishConfiguring() to ensure that your changes are published.

Improved story source handling

The story source code handling has been improved in both addon-storysource and addon-docs.

In 5.x some users used an undocumented internal API, mdxSource to customize source snippetization in addon-docs. This has been removed in 6.0.

The preferred way to customize source snippets for stories is now:

export const Example = () => <Button />;
Example.story = {
  parameters: {
    storySource: {
      source: 'custom source',
    },
  },
};

The MDX analog:

<Story name="Example" parameters={{ storySource: { source: 'custom source' } }}>
  <Button />
</Story>

6.0 Addon API changes

Consistent local addon paths in main.js

If you use .storybook/main.js config and have locally-defined addons in your project, you need to update your file paths.

In 5.3, addons paths were relative to the project root, which was inconsistent with stories paths, which were relative to the .storybook folder. In 6.0, addon paths are now relative to the config folder.

So, for example, if you had:

module.exports = { addons: ['./.storybook/my-local-addon/register'] };

You'd need to update this to:

module.exports = { addons: ['./my-local-addon/register'] };

Deprecated setAddon

We've deprecated the setAddon method of the storiesOf API and plan to remove it in 7.0.

Since early versions, Storybook shipped with a setAddon API, which allows you to extend storiesOf with arbitrary code. We've removed this from all core addons long ago and recommend writing stories in Component Story Format rather than using the internal Storybook API.

Deprecated disabled parameter

Starting in 6.0.17, we've renamed the disabled parameter to disable to resolve an inconsistency where disabled had been used to hide the addon panel, whereas disable had been used to disable an addon's execution. Since disable was much more widespread in the code, we standardized on that.

So, for example:

Story.parameters = { actions: { disabled: true } }

Should be rewritten as:

Story.parameters = { actions: { disable: true } }

Actions addon uses parameters

Leveraging the new preset @storybook/addon-actions uses parameters to pass action options. If you previously had:

import { withActions } from `@storybook/addon-actions`;

export StoryOne = ...;
StoryOne.story = {
  decorators: [withActions('mouseover', 'click .btn')],
}

You should replace it with:

export StoryOne = ...;
StoryOne.story = {
  parameters: { actions: ['mouseover', 'click .btn'] },
}

Removed action decorator APIs

In 6.0 we removed the actions addon decorate API. Actions handles can be configured globally, for a collection of stories or per story via parameters. The ability to manipulate the data arguments of an event is only relevant in a few frameworks and is not a common enough usecase to be worth the complexity of supporting.

Removed withA11y decorator

In 6.0 we removed the withA11y decorator. The code that runs accessibility checks is now directly injected in the preview.

To configure a11y now, you have to specify configuration using story parameters, e.g. in .storybook/preview.js:

export const parameters = {
  a11y: {
    element: '#root',
    config: {},
    options: {},
    manual: true,
  },
};

Essentials addon disables differently

In 6.0, addon-essentials doesn't configure addons if the user has already configured them in main.js. In 5.3 it previously checked to see whether the package had been installed in package.json to disable configuration. The new setup is preferably because now users' can install essential packages and import from them without disabling their configuration.

Backgrounds addon has a new api

Starting in 6.0, the backgrounds addon now receives an object instead of an array as parameter, with a property to define the default background.

Consider the following example of its usage in Button.stories.js:

// Button.stories.js
export default {
  title: 'Button',
  parameters: {
    backgrounds: [
      { name: 'twitter', value: '#00aced', default: true },
      { name: 'facebook', value: '#3b5998' },
    ],
  },
};

Here's an updated version of the example, using the new api:

// Button.stories.js
export default {
  title: 'Button',
  parameters: {
    backgrounds: {
      default: 'twitter',
      values: [
        { name: 'twitter', value: '#00aced' },
        { name: 'facebook', value: '#3b5998' },
      ],
    },
  },
};

In addition, backgrounds now ships with the following defaults:

  • no selected background (transparent)
  • light/dark options

6.0 Deprecations

We've deprecated the following in 6.0: addon-info, addon-notes, addon-contexts, addon-centered, polymer.

Deprecated addon-info, addon-notes

The info/notes addons have been replaced by addon-docs. We've documented a migration in the docs recipes.

Both addons are still widely used, and their source code is still available in the deprecated-addons repo. We're looking for maintainers for both addons. If you're interested, please get in touch on our Discord.

Deprecated addon-contexts

The contexts addon has been replaced by addon-toolbars, which is simpler, more ergonomic, and compatible with all Storybook frameworks.

The addon's source code is still available in the deprecated-addons repo. If you're interested in maintaining it, please get in touch on our Discord.

Removed addon-centered

In 6.0 we removed the centered addon. Centering is now core feature of storybook, so we no longer need an addon.

Remove the addon-centered decorator and instead add a layout parameter:

export const MyStory = () => <div>my story</div>;
MyStory.story = {
  parameters: { layout: 'centered' },
};

Other possible values are: padded (default) and fullscreen.

Deprecated polymer

We've deprecated @storybook/polymer and are focusing on @storybook/web-components. If you use Polymer and are interested in maintaining it, please get in touch on our Discord.

Deprecated immutable options parameters

The UI options sidebarAnimations, enableShortcuts, theme, showRoots should not be changed on a per-story basis, and as such there is no reason to set them via parameters.

You should use addon.setConfig to set them:

// in .storybook/manager.js
import { addons } from '@storybook/addons';

addons.setConfig({
  showRoots: false,
});

Deprecated addParameters and addDecorator

The addParameters and addDecorator APIs to add global decorators and parameters, exported by the various frameworks (e.g. @storybook/react) and @storybook/client are now deprecated.

Instead, use export const parameters = {}; and export const decorators = []; in your .storybook/preview.js. Addon authors similarly should use such an export in a preview entry file (see Preview entries).

Deprecated clearDecorators

Similarly, clearDecorators, exported by the various frameworks (e.g. @storybook/react) is deprecated.

Deprecated configure

The configure API to load stories from preview.js, exported by the various frameworks (e.g. @storybook/react) is now deprecated.

To load stories, use the stories field in main.js. You can pass a glob or array of globs to load stories like so:

// in .storybook/main.js
module.exports = {
  stories: ['../src/**/*.stories.js'],
};

You can also pass an array of single file names if you want to be careful about loading files:

// in .storybook/main.js
module.exports = {
  stories: [
    '../src/components/Button.stories.js',
    '../src/components/Table.stories.js',
    '../src/components/Page.stories.js',
  ],
};

Deprecated support for duplicate kinds

In 6.0 we deprecated the ability to split a kind's (component's) stories into multiple files because it was causing issues in hot module reloading (HMR). It will likely be removed completely in 7.0.

If you had N stories that contained export default { title: 'foo/bar' } (or the MDX equivalent <Meta title="foo/bar">), Storybook will now raise the warning Duplicate title '${kindName}' used in multiple files.

To split a component's stories into multiple files, e.g. for the foo/bar example above:

  • Create a single file with the export default { title: 'foo/bar' } export, which is the primary file
  • Comment out or delete the default export from the other files
  • Re-export the stories from the other files in the primary file

So the primary example might look like:

export default { title: 'foo/bar' };
export * from './Bar1.stories'
export * from './Bar2.stories'
export * from './Bar3.stories'

export const SomeStory = () => ...;

From version 5.2.x to 5.3.x

To main.js configuration

In storybook 5.3 3 new files for configuration were introduced, that replaced some previous files.

These files are now soft-deprecated, (they still work, but over time we will promote users to migrate):

  • presets.js has been renamed to main.js. main.js is the main point of configuration for storybook.
  • config.js has been renamed to preview.js. preview.js configures the "preview" iframe that renders your components.
  • addons.js has been renamed to manager.js. manager.js configures Storybook's "manager" UI that wraps the preview, and also configures addons panel.

Using main.js

main.js is now the main point of configuration for Storybook. This is what a basic main.js looks like:

module.exports = {
  stories: ['../**/*.stories.js'],
  addons: ['@storybook/addon-knobs'],
};

You remove all "register" import from addons.js and place them inside the array. You can also safely remove the /register suffix from these entries, for a cleaner, more readable configuration. If this means addons.js is now empty for you, it's safe to remove.

Next you remove the code that imports/requires all your stories from config.js, and change it to a glob-pattern and place that glob in the stories array. If this means config.js is empty, it's safe to remove.

If you had a presets.js file before you can add the array of presets to the main.js file and remove presets.js like so:

module.exports = {
  stories: ['../**/*.stories.js'],
  addons: [
    '@storybook/preset-create-react-app',
    {
      name: '@storybook/addon-docs',
      options: { configureJSX: true },
    },
  ],
};

By default, adding a package to the addons array will first try to load its preset entry, then its register entry, and finally, it will just assume the package itself is a preset.

If you want to load a specific package entry, for example you want to use @storybook/addon-docs/register, you can also include that in the addons array and Storybook will do the right thing.

Using preview.js

If after migrating the imports/requires of your stories to main.js you're left with some code in config.js it's likely the usage of addParameters & addDecorator.

This is fine, rename config.js to preview.js.

This file can also be used to inject global stylesheets, fonts etc, into the preview bundle.

Using manager.js

If you are setting storybook options in config.js, especially theme, you should migrate it to manager.js:

import { addons } from '@storybook/addons';
import { create } from '@storybook/theming/create';

const theme = create({
  base: 'light',
  brandTitle: 'My custom title',
});

addons.setConfig({
  panelPosition: 'bottom',
  theme,
});

This makes storybook load and use the theme in the manager directly. This allows for richer theming in the future, and has a much better performance!

If you're using addon-docs, you should probably not do this. Docs uses the theme as well, but this change makes the theme inaccessible to addon-docs. We'll address this in 6.0.0.

Create React App preset

You can now move to the new preset for Create React App. The in-built preset for Create React App will be disabled in Storybook 6.0.

Simply install @storybook/preset-create-react-app and it will be used automatically.

Description doc block

In 5.3 we've changed addon-docs's Description doc block's default behavior. Technically this is a breaking change, but MDX was not officially released in 5.2 and we reserved the right to make small breaking changes. The behavior of DocsPage, which was officially released, remains unchanged.

The old behavior of <Description of={Component} /> was to concatenate the info parameter or notes parameter, if available, with the docgen information loaded from source comments. If you depend on the old behavior, it's still available with <Description of={Component} type='legacy-5.2' />. This description type will be removed in Storybook 6.0.

The new default behavior is to use the framework-specific description extractor, which for React/Vue is still docgen, but may come from other places (e.g. a JSON file) for other frameworks.

The description doc block on DocsPage has also been updated. To see how to configure it in 5.3, please see the updated recipe

React Native Async Storage

Starting from version React Native 0.59, Async Storage is deprecated in React Native itself. The new @react-native-async-storage/async-storage module requires native installation, and we don't want to have it as a dependency for React Native Storybook.

To avoid that now you have to manually pass asyncStorage to React Native Storybook with asyncStorage prop. To notify users we are displaying a warning about it.

Solution:

  • Use require('@react-native-async-storage/async-storage').default for React Native v0.59 and above.
  • Use require('react-native').AsyncStorage for React Native v0.58 or below.
  • Use null to disable Async Storage completely.
getStorybookUI({
  ...
  asyncStorage: require('@react-native-async-storage/async-storage').default || require('react-native').AsyncStorage || null
});

The benefit of using Async Storage is so that when users refresh the app, Storybook can open their last visited story.

Deprecate displayName parameter

In 5.2, the story parameter displayName was introduced as a publicly visible (but internal) API. Storybook's Component Story Format (CSF) loader used it to modify a story's display name independent of the story's name/id (which were coupled).

In 5.3, the CSF loader decouples the story's name/id, which means that displayName is no longer necessary. Unfortunately, this is a breaking change for any code that uses the story name field. Storyshots relies on story name, and the appropriate migration is to simply update your snapshots. Apologies for the inconvenience!

Unified docs preset

Addon-docs configuration gets simpler in 5.3. In 5.2, each framework had its own preset, e.g. @storybook/addon-docs/react/preset. Starting in 5.3, everybody should use @storybook/addon-docs/preset.

Simplified hierarchy separators

We've deprecated the ability to specify the hierarchy separators (how you control the grouping of story kinds in the sidebar). From Storybook 6.0 we will have a single separator /, which cannot be configured.

If you are currently using custom separators, we encourage you to migrate to using / as the sole separator. If you are using | or . as a separator currently, we provide a codemod, upgrade-hierarchy-separators, that can be used to rename all your components.

yarn sb migrate upgrade-hierarchy-separators --glob="*.stories.js"

If you were using | and wish to keep the "root" behavior, use the showRoots: true option to re-enable roots:

addParameters({
  options: {
    showRoots: true,
  },
});

NOTE: it is no longer possible to have some stories with roots and others without. If you want to keep the old behavior, simply add a root called "Others" to all your previously unrooted stories.

Addon StoryShots Puppeteer uses external puppeteer

To give you more control on the Chrome version used when running StoryShots Puppeteer, puppeteer is no more included in the addon dependencies. So you can now pick the version of puppeteer you want and set it in your project.

If you want the latest version available just run:

yarn add puppeteer --dev
OR
npm install puppeteer --save-dev

From version 5.1.x to 5.2.x

Source-loader

Addon-storysource contains a loader, @storybook/addon-storysource/loader, which has been deprecated in 5.2. If you use it, you'll see the warning:

@storybook/addon-storysource/loader is deprecated, please use @storybook/source-loader instead.

To upgrade to @storybook/source-loader, run npm install -D @storybook/source-loader (or use yarn), and replace every instance of @storybook/addon-storysource/loader with @storybook/source-loader.

Default viewports

The default viewports have been reduced to a smaller set, we think is enough for most use cases. You can get the old default back by adding the following to your config.js:

import { INITIAL_VIEWPORTS } from '@storybook/addon-viewport';

addParameters({
  viewport: {
    viewports: INITIAL_VIEWPORTS,
  },
});

Grid toolbar-feature

The grid feature in the toolbar has been relocated to addon-background, follow the setup instructions on that addon to get the feature again.

Docs mode docgen

This isn't a breaking change per se, because addon-docs is a new feature. However it's intended to replace addon-info, so if you're migrating from addon-info there are a few things you should know:

  1. Support for only one prop table
  2. Prop table docgen info should be stored on the component and not in the global variable STORYBOOK_REACT_CLASSES as before.

storySort option

In 5.0.x the global option sortStoriesByKind option was inadvertently removed. In 5.2 we've introduced a new option, storySort, to replace it. storySort takes a comparator function, so it is strictly more powerful than sortStoriesByKind.

For example, here's how to sort by story ID using storySort:

addParameters({
  options: {
    storySort: (a, b) =>
      a[1].kind === b[1].kind ? 0 : a[1].id.localeCompare(b[1].id, undefined, { numeric: true }),
  },
});

From version 5.1.x to 5.1.10

babel.config.js support

SB 5.1.0 added support for project root babel.config.js files, which was an unintentional breaking change. 5.1.10 fixes this, but if you relied on project root babel.config.js support, this bugfix is a breaking change. The workaround is to copy the file into your .storybook config directory. We may add back project-level support in 6.0.

From version 5.0.x to 5.1.x

React native server

Storybook 5.1 contains a major overhaul of @storybook/react-native as compared to 4.1 (we didn't ship a version of RN in 5.0 due to timing constraints). Storybook for RN consists of an an UI for browsing stories on-device or in a simulator, and an optional webserver which can also be used to browse stories and web addons.

5.1 refactors both pieces:

  • @storybook/react-native no longer depends on the Storybook UI and only contains on-device functionality
  • @storybook/react-native-server is a new package for those who wish to run a web server alongside their device UI

In addition, both packages share more code with the rest of Storybook, which will reduce bugs and increase compatibility (e.g. with the latest versions of babel, etc.).

As a user with an existing 4.1.x RN setup, no migration should be necessary to your RN app. Upgrading the library should be enough.

If you wish to run the optional web server, you will need to do the following migration:

  • Add babel-loader as a dev dependency
  • Add @storybook/react-native-server as a dev dependency
  • Change your "storybook" package.json script from storybook start [-p ...] to start-storybook [-p ...]

And with that you should be good to go!

Angular 7

Storybook 5.1 relies on core-js@^3.0.0 and therefore causes a conflict with Angular 7 that relies on core-js@^2.0.0. In order to get Storybook running on Angular 7 you can either update to Angular 8 (which dropped core-js as a dependency) or follow these steps:

  • Remove node_modules/@storybook
  • npm i core-js@^3.0.0 / yarn add core-js@^3.0.0
  • Add the following paths to your tsconfig.json
{
  "compilerOptions": {
    "paths": {
      "core-js/es7/reflect": ["node_modules/core-js/proposals/reflect-metadata"],
      "core-js/es6/*": ["node_modules/core-js/es"]
    }
  }
}

You should now be able to run Storybook and Angular 7 without any errors.

Reference issue: angular/angular-cli#13954

CoreJS 3

Following the rest of the JS ecosystem, Storybook 5.1 upgrades CoreJS 2 to 3, which is a breaking change.

This upgrade is problematic because many apps/libraries still rely on CoreJS 2, and many users get corejs-related errors due to bad resolution. To address this, we're using corejs-upgrade-webpack-plugin, which attempts to automatically upgrade code to CoreJS 3.

After a few iterations, this approach seems to be working. However, there are a few exceptions:

  • If your app uses babel-polyfill, try to remove it

We'll update this section as we find more problem cases. If you have a core-js problem, please file an issue (preferably with a repro), and we'll do our best to get you sorted.

Update: corejs-upgrade-webpack-plugin has been removed again after running into further issues as described in storybookjs#7445.

From version 5.0.1 to 5.0.2

Deprecate webpack extend mode

Exporting an object from your custom webpack config puts storybook in "extend mode".

There was a bad bug in v5.0.0 involving webpack "extend mode" that caused webpack issues for users migrating from 4.x. We've fixed this problem in v5.0.2 but it means that extend-mode has a different behavior if you're migrating from 5.0.0 or 5.0.1. In short, 4.x extended a base config with the custom config, whereas 5.0.0-1 extended the base with a richer config object that could conflict with the custom config in different ways from 4.x.

We've also deprecated "extend mode" because it doesn't add a lot of value over "full control mode", but adds more code paths, documentation, user confusion etc. Starting in SB6.0 we will only support "full control mode" customization.

To migrate from extend-mode to full-control mode, if your extend-mode webpack config looks like this:

module.exports = {
  module: {
    rules: [
      /* ... */
    ],
  },
};

In full control mode, you need modify the default config to have the rules of your liking:

module.exports = ({ config }) => ({
  ...config,
  module: {
    ...config.module,
    rules: [
      /* your own rules "..." here and/or some subset of config.module.rules */
    ],
  },
});

Please refer to the current custom webpack documentation for more information on custom webpack config and to Issue #6081 for more information about the change.

From version 4.1.x to 5.0.x

Storybook 5.0 includes sweeping UI changes as well as changes to the addon API and custom webpack configuration. We've tried to keep backwards compatibility in most cases, but there are some notable exceptions documented below.

sortStoriesByKind

In Storybook 5.0 we changed a lot of UI related code, and 1 oversight caused the sortStoriesByKind options to stop working. We're working on providing a better way of sorting stories for now the feature has been removed. Stories appear in the order they are loaded.

If you're using webpack's require.context to load stories, you can sort the execution of requires:

var context = require.context('../stories', true, /\.stories\.js$/);
var modules = context.keys();

// sort them
var sortedModules = modules.slice().sort((a, b) => {
  // sort the stories based on filename/path
  return a < b ? -1 : a > b ? 1 : 0;
});

// execute them
sortedModules.forEach((key) => {
  context(key);
});

Webpack config simplification

The API for custom webpack configuration has been simplified in 5.0, but it's a breaking change. Storybook's "full control mode" for webpack allows you to override the webpack config with a function that returns a configuration object.

In Storybook 5 there is a single signature for full-control mode that takes a parameters object with the fields config and mode:

module.exports = ({ config, mode }) => { config.module.rules.push(...); return config; }

In contrast, the 4.x configuration function accepted either two or three arguments ((baseConfig, mode), or (baseConfig, mode, defaultConfig)). The config object in the 5.x signature is equivalent to 4.x's defaultConfig.

Please see the current custom webpack documentation for more information on custom webpack config.

Theming overhaul

Theming has been rewritten in v5. If you used theming in v4, please consult the theming docs to learn about the new API.

Story hierarchy defaults

Storybook's UI contains a hierarchical tree of stories that can be configured by hierarchySeparator and hierarchyRootSeparator options.

In Storybook 4.x the values defaulted to null for both of these options, so that there would be no hierarchy by default.

In 5.0, we now provide recommended defaults:

{
  hierarchyRootSeparator: '|',
  hierarchySeparator: /\/|\./,
}

This means if you use the characters { |, /, . } in your story kinds it will trigger the story hierarchy to appear. For example storiesOf('UI|Widgets/Basics/Button') will create a story root called UI containing a Widgets/Basics group, containing a Button component.

If you wish to opt-out of this new behavior and restore the flat UI, set them back to null in your storybook config, or remove { |, /, . } from your story kinds:

addParameters({
  options: {
    hierarchyRootSeparator: null,
    hierarchySeparator: null,
  },
});

Options addon deprecated

In 4.x we added story parameters. In 5.x we've deprecated the options addon in favor of global parameters, and we've also renamed some of the options in the process (though we're maintaining backwards compatibility until 6.0).

Here's an old configuration:

addDecorator(
  withOptions({
    name: 'Storybook',
    url: 'https://storybook.js.org',
    goFullScreen: false,
    addonPanelInRight: true,
  })
);

And here's its new counterpart:

import { create } from '@storybook/theming/create';
addParameters({
  options: {
    theme: create({
      base: 'light',
      brandTitle: 'Storybook',
      brandUrl: 'https://storybook.js.org',
      // To control appearance:
      // brandImage: 'http://url.of/some.svg',
    }),
    isFullscreen: false,
    panelPosition: 'right',
    isToolshown: true,
  },
});

Here is the mapping from old options to new:

Old New
name theme.brandTitle
url theme.brandUrl
goFullScreen isFullscreen
showStoriesPanel showNav
showAddonPanel showPanel
addonPanelInRight panelPosition
showSearchBox
isToolshown

Storybook v5 removes the search dialog box in favor of a quick search in the navigation view, so showSearchBox has been removed.

Storybook v5 introduce a new tool bar above the story view and you can show\hide it with the new isToolshown option.

Individual story decorators

The behavior of adding decorators to a kind has changed in SB5 (#5781).

In SB4 it was possible to add decorators to only a subset of the stories of a kind.

storiesOf('Stories', module)
  .add('noncentered', () => 'Hello')
  .addDecorator(centered)
  .add('centered', () => 'Hello');

The semantics has changed in SB5 so that calling addDecorator on a kind adds a decorator to all its stories, no matter the order. So in the previous example, both stories would be centered.

To allow for a subset of the stories in a kind to be decorated, we've added the ability to add decorators to individual stories using parameters:

storiesOf('Stories', module)
  .add('noncentered', () => 'Hello')
  .add('centered', () => 'Hello', { decorators: [centered] });

Addon backgrounds uses parameters

Similarly, @storybook/addon-backgrounds uses parameters to pass background options. If you previously had:

import { withBackgrounds } from `@storybook/addon-backgrounds`;

storiesOf('Stories', module)
  .addDecorator(withBackgrounds(options));

You should replace it with:

storiesOf('Stories', module).addParameters({ backgrounds: options });

You can pass backgrounds parameters at the global level (via addParameters imported from @storybook/react et al.), and the story level (via the third argument to .add()).

Addon cssresources name attribute renamed

In the options object for @storybook/addon-cssresources, the name attribute for each resource has been renamed to id. If you previously had:

import { withCssResources } from '@storybook/addon-cssresources';
import { addDecorator } from '@storybook/react';

addDecorator(
  withCssResources({
    cssresources: [
      {
        name: `bluetheme`, // Previous
        code: `<style>body { background-color: lightblue; }</style>`,
        picked: false,
      },
    ],
  })
);

You should replace it with:

import { withCssResources } from '@storybook/addon-cssresources';
import { addDecorator } from '@storybook/react';

addDecorator(
  withCssResources({
    cssresources: [
      {
        id: `bluetheme`, // Renamed
        code: `<style>body { background-color: lightblue; }</style>`,
        picked: false,
      },
    ],
  })
);

Addon viewport uses parameters

Similarly, @storybook/addon-viewport uses parameters to pass viewport options. If you previously had:

import { configureViewport } from `@storybook/addon-viewport`;

configureViewport(options);

You should replace it with:

import { addParameters } from '@storybook/react'; // or others

addParameters({ viewport: options });

The withViewport decorator is also no longer supported and should be replaced with a parameter based API as above. Also the onViewportChange callback is no longer supported.

See the viewport addon README for more information.

Addon a11y uses parameters, decorator renamed

Similarly, @storybook/addon-a11y uses parameters to pass a11y options. If you previously had:

import { configureA11y } from `@storybook/addon-a11y`;

configureA11y(options);

You should replace it with:

import { addParameters } from '@storybook/react'; // or others

addParameters({ a11y: options });

You can also pass a11y parameters at the component level (via storiesOf(...).addParameters), and the story level (via the third argument to .add()).

Furthermore, the decorator checkA11y has been deprecated and renamed to withA11y to make it consistent with other Storybook decorators.

See the a11y addon README for more information.

Addon centered decorator deprecated

If you previously had:

import centered from '@storybook/addon-centered';

You should replace it with the React or Vue version as appropriate

import centered from '@storybook/addon-centered/react';

or

import centered from '@storybook/addon-centered/vue';

New keyboard shortcuts defaults

Storybook's keyboard shortcuts are updated in 5.0, but they are configurable via the menu so if you want to set them back you can:

Shortcut Old New
Toggle sidebar cmd-shift-X S
Toggle addons panel cmd-shift-Z A
Toggle addons position cmd-shift-G D
Toggle fullscreen cmd-shift-F F
Next story cmd-shift-→ alt-→
Prev story cmd-shift-← alt-←
Next component alt-↓
Prev component alt-↑
Search /

New URL structure

We've update Storybook's URL structure in 5.0. The old structure used URL parameters to save the UI state, resulting in long ugly URLs. v5 respects the old URL parameters, but largely does away with them.

The old structure encoded selectedKind and selectedStory among other parameters. Storybook v5 respects these parameters but will issue a deprecation message in the browser console warning of potential future removal.

The new URL structure looks like:

https://url-of-storybook?path=/story/<storyId>

The structure of storyId is a slugified <selectedKind>--<selectedStory> (slugified = lowercase, hyphen-separated). Each storyId must be unique. We plan to build more features into Storybook in upcoming versions based on this new structure.

Rename of the --secure cli parameter to --https

Storybook for React Native's start commands & the Web versions' start command were a bit different, for no reason. We've changed the start command for Reactnative to match the other.

This means that when you previously used the --secure flag like so:

start-storybook --secure
# or
start-storybook --s

You have to replace it with:

start-storybook --https

Vue integration

The Vue integration was updated, so that every story returned from a story or decorator function is now being normalized with Vue.extend and is being wrapped by a functional component. Returning a string from a story or decorator function is still supported and is treated as a component with the returned string as the template.

Currently there is no recommended way of accessing the component options of a story inside a decorator.

From version 4.0.x to 4.1.x

There are are a few migrations you should be aware of in 4.1, including one unintentionally breaking change for advanced addon usage.

Private addon config

If your Storybook contains custom addons defined that are defined in your app (as opposed to installed from packages) and those addons rely on reconfiguring webpack/babel, Storybook 4.1 may break for you. There's a workaround described in the issue, and we're working on official support in the next release.

React 15.x

Storybook 4.1 supports React 15.x (which had been lost in the 4.0 release). So if you've been blocked on upgrading, we've got you covered. You should be able to upgrade according to the 4.0 migration notes below, or following the 4.0 upgrade guide.

From version 3.4.x to 4.0.x

With 4.0 as our first major release in over a year, we've collected a lot of cleanup tasks. Most of the deprecations have been marked for months, so we hope that there will be no significant impact on your project. We've also created a step-by-step guide to help you upgrade.

React 16.3+

Storybook uses Emotion for styling which currently requires React 16.3 and above.

If you're using Storybook for anything other than React, you probably don't need to worry about this.

However, if you're developing React components, this means you need to upgrade to 16.3 or higher to use Storybook 4.0.

NOTE: This is a temporary requirement, and we plan to restore 15.x compatibility in a near-term 4.x release.

Also, here's the error you'll get if you're running an older version of React:


core.browser.esm.js:15 Uncaught TypeError: Object(...) is not a function
at Module../node_modules/@emotion/core/dist/core.browser.esm.js (core.browser.esm.js:15)
at **webpack_require** (bootstrap:724)
at fn (bootstrap:101)
at Module../node_modules/@emotion/styled-base/dist/styled-base.browser.esm.js (styled-base.browser.esm.js:1)
at **webpack_require** (bootstrap:724)
at fn (bootstrap:101)
at Module../node_modules/@emotion/styled/dist/styled.esm.js (styled.esm.js:1)
at **webpack_require** (bootstrap:724)
at fn (bootstrap:101)
at Object../node_modules/@storybook/components/dist/navigation/MenuLink.js (MenuLink.js:12)

Generic addons

4.x introduces generic addon decorators that are not tied to specific view layers #3555. So for example:

import { number } from '@storybook/addon-knobs/react';

Becomes:

import { number } from '@storybook/addon-knobs';

Knobs select ordering

4.0 also reversed the order of addon-knob's select knob keys/values, which had been called selectV2 prior to this breaking change. See the knobs package README for usage.

Knobs URL parameters

Addon-knobs no longer updates the URL parameters interactively as you edit a knob. This is a UI change but it shouldn't break any code because old URLs are still supported.

In 3.x, editing knobs updated the URL parameters interactively. The implementation had performance and architectural problems. So in 4.0, we changed this to a "copy" button in the addon which generates a URL with the updated knob values and copies it to the clipboard.

Keyboard shortcuts moved

  • Addon Panel to Z
  • Stories Panel to X
  • Show Search to O
  • Addon Panel right side to G

Removed addWithInfo

Addon-info's addWithInfo has been marked deprecated since 3.2. In 4.0 we've removed it completely. See the package README for the proper usage.

Removed RN packager

Since storybook version v4.0 packager is removed from storybook. The suggested storybook usage is to include it inside your app. If you want to keep the old behaviour, you have to start the packager yourself with a different project root. npm run storybook start -p 7007 | react-native start --projectRoot storybook

Removed cli options: --packager-port --root --projectRoots -r, --reset-cache --skip-packager --haul --platform --metro-config

Removed RN addons

The @storybook/react-native had built-in addons (addon-actions and addon-links) that have been marked as deprecated since 3.x. They have been fully removed in 4.x. If your project still uses the built-ins, you'll need to add explicit dependencies on @storybook/addon-actions and/or @storybook/addon-links and import directly from those packages.

Storyshots Changes

  1. imageSnapshot test function was extracted from addon-storyshots and moved to a new package - addon-storyshots-puppeteer that now will be dependant on puppeteer. README
  2. getSnapshotFileName export was replaced with the Stories2SnapsConverter class that now can be overridden for a custom implementation of the snapshot-name generation. README
  3. Storybook that was configured with Webpack's require.context() feature will need to add a babel plugin to polyfill this functionality. A possible plugin might be babel-plugin-require-context-hook. README

Webpack 4

Storybook now uses webpack 4. If you have a custom webpack config, make sure that all the loaders and plugins you use support webpack 4.

Babel 7

Storybook now uses Babel 7. There's a couple of cases when it can break with your app:

  • If you aren't using Babel yourself, and don't have .babelrc, install following dependencies:

    npm i -D @babel/core babel-loader@next

  • If you're using Babel 6, make sure that you have direct dependencies on babel-core@6 and babel-loader@7 and that you have a .babelrc in your project directory.

Create-react-app

If you are using create-react-app (aka CRA), you may need to do some manual steps to upgrade, depending on the setup.

  • create-react-app@1 may require manual migrations.
    • If you're adding storybook for the first time: sb init should add the correct dependencies.
    • If you're upgrading an existing project, your package.json probably already uses Babel 6, making it incompatible with @storybook/react@4 which uses Babel 7. There are two ways to make it compatible, each of which is spelled out in detail in the next section:
      • Upgrade to Babel 7 if you are not dependent on Babel 6-specific features.
      • Migrate Babel 6 if you're heavily dependent on some Babel 6-specific features).
  • create-react-app@2 should be compatible as is, since it uses babel 7.

Upgrade CRA1 to babel 7

yarn remove babel-core babel-runtime
yarn add @babel/core babel-loader --dev

Migrate CRA1 while keeping babel 6

yarn add babel-loader@7

Also, make sure you have a .babelrc in your project directory. You probably already do if you are using Babel 6 features (otherwise you should consider upgrading to Babel 7 instead). If you don't have one, here's one that works:

{
  "presets": ["env", "react"]
}

start-storybook opens browser

If you're using start-storybook on CI, you may need to opt out of this using the new --ci flag.

CLI Rename

We've deprecated the getstorybook CLI in 4.0. The new way to install storybook is sb init. We recommend using npx for convenience and to make sure you're always using the latest version of the CLI:

npx -p @storybook/cli sb init

Addon story parameters

Storybook 4 introduces story parameters, a more convenient way to configure how addons are configured.

storiesOf('My component', module)
  .add('story1', withNotes('some notes')(() => <Component ... />))
  .add('story2', withNotes('other notes')(() => <Component ... />));

Becomes:

// config.js
addDecorator(withNotes);

// Component.stories.js
storiesOf('My component', module)
  .add('story1', () => <Component ... />, { notes: 'some notes' })
  .add('story2', () => <Component ... />, { notes: 'other notes' });

This example applies notes globally to all stories. You can apply it locally with storiesOf(...).addDecorator(withNotes).

The story parameters correspond directly to the old withX arguments, so it's less demanding to migrate your code. See the parameters documentation for the packages that have been upgraded:

From version 3.3.x to 3.4.x

There are no expected breaking changes in the 3.4.x release, but 3.4 contains a major refactor to make it easier to support new frameworks, and we will document any breaking changes here if they arise.

From version 3.2.x to 3.3.x

It wasn't expected that there would be any breaking changes in this release, but unfortunately it turned out that there are some. We're revisiting our release strategy to follow semver more strictly. Also read on if you're using addon-knobs: we advise an update to your code for efficiency's sake.

babel-core is now a peer dependency #2494

This affects you if you don't use babel in your project. You may need to add babel-core as dev dependency:

yarn add babel-core --dev

This was done to support different major versions of babel.

Base webpack config now contains vital plugins #1775

This affects you if you use custom webpack config in Full Control Mode while not preserving the plugins from storybookBaseConfig. Before 3.3, preserving them was a recommendation, but now it became a requirement.

Refactored Knobs

Knobs users: there was a bug in 3.2.x where using the knobs addon imported all framework runtimes (e.g. React and Vue). To fix the problem, we refactored knobs. Switching to the new style is only takes one line of code.

In the case of React or React-Native, import knobs like this:

import { withKnobs, text, boolean, number } from '@storybook/addon-knobs/react';

In the case of Vue: import { ... } from '@storybook/addon-knobs/vue';

In the case of Angular: import { ... } from '@storybook/addon-knobs/angular';

From version 3.1.x to 3.2.x

NOTE: technically this is a breaking change, but only if you use TypeScript. Sorry people!

Moved TypeScript addons definitions

TypeScript users: we've moved the rest of our addons type definitions into DefinitelyTyped. Starting in 3.2.0 make sure to use the right addons types:

yarn add @types/storybook__addon-notes @types/storybook__addon-options @types/storybook__addon-knobs @types/storybook__addon-links --dev

See also TypeScript definitions in 3.1.x.

Updated Addons API

We're in the process of upgrading our addons APIs. As a first step, we've upgraded the Info and Notes addons. The old API will still work with your existing projects but will be deprecated soon and removed in Storybook 4.0.

Here's an example of using Notes and Info in 3.2 with the new API.

storiesOf('composition', module).add(
  'new addons api',
  withInfo('see Notes panel for composition info')(
    withNotes({ text: 'Composition: Info(Notes())' })((context) => (
      <MyComponent name={context.story} />
    ))
  )
);

It's not beautiful, but we'll be adding a more convenient/idiomatic way of using these withX primitives in Storybook 3.3.

From version 3.0.x to 3.1.x

NOTE: technically this is a breaking change and should be a 4.0.0 release according to semver. However, we're still figuring things out and didn't think this change necessitated a major release. Please bear with us!

Moved TypeScript definitions

TypeScript users: we are in the process of moving our typescript definitions into DefinitelyTyped. If you're using TypeScript, starting in 3.1.0 you need to make sure your type definitions are installed:

yarn add @types/node @types/react @types/storybook__react --dev

Deprecated head.html

We have deprecated the use of head.html for including scripts/styles/etc. into stories, though it will still work with a warning.

Now we use:

  • preview-head.html for including extra content into the preview pane.
  • manager-head.html for including extra content into the manager window.

Read our docs for more details.

From version 2.x.x to 3.x.x

This major release is mainly an internal restructuring. Upgrading requires work on behalf of users, this was unavoidable. We're sorry if this inconveniences you, we have tried via this document and provided tools to make the process as easy as possible.

Webpack upgrade

Storybook will now use webpack 2 (and only webpack 2). If you are using a custom webpack.config.js you need to change this to be compatible. You can find the guide to upgrading your webpack config on webpack.js.org.

Packages renaming

All our packages have been renamed and published to npm as version 3.0.0 under the @storybook namespace.

To update your app to use the new package names, you can use the cli:

npx -p @storybook/cli sb init

Details

If the above doesn't work, or you want to make the changes manually, the details are below:

We have adopted the same versioning strategy that has been adopted by babel, jest and apollo. It's a strategy best suited for ecosystem type tools, which consist of many separately installable features / packages. We think this describes storybook pretty well.

The new package names are:

old new
getstorybook @storybook/cli
@kadira/getstorybook @storybook/cli
@kadira/storybook @storybook/react
@kadira/react-storybook @storybook/react
@kadira/react-native-storybook @storybook/react-native
storyshots @storybook/addon-storyshots
@kadira/storyshots @storybook/addon-storyshots
@kadira/storybook-ui @storybook/ui
@kadira/storybook-addons @storybook/addons
@kadira/storybook-channels @storybook/channels
@kadira/storybook-channel-postmsg @storybook/channel-postmessage
@kadira/storybook-channel-websocket @storybook/channel-websocket
@kadira/storybook-addon-actions @storybook/addon-actions
@kadira/storybook-addon-links @storybook/addon-links
@kadira/storybook-addon-info @storybook/addon-info
@kadira/storybook-addon-knobs @storybook/addon-knobs
@kadira/storybook-addon-notes @storybook/addon-notes
@kadira/storybook-addon-options @storybook/addon-options
@kadira/storybook-addon-graphql @storybook/addon-graphql
@kadira/react-storybook-decorator-centered @storybook/addon-centered

If your codebase is small, it's probably doable to replace them by hand (in your codebase and in package.json).

But if you have a lot of occurrences in your codebase, you can use a codemod we created for you.

A codemod makes automatic changed to your app's code.

You have to change your package.json, prune old and install new dependencies by hand.

npm prune will remove all dependencies from node_modules which are no longer referenced in package.json.

Deprecated embedded addons

We used to ship 2 addons with every single installation of storybook: actions and links. But in practice not everyone is using them, so we decided to deprecate this and in the future, they will be completely removed. If you use @storybook/react/addons you will get a deprecation warning.

If you are using these addons, it takes two steps to migrate:

  • add the addons you use to your package.json.

  • update your code: change addons.js like so:

    import '@storybook/addon-actions/register';
import '@storybook/addon-links/register';

    change x.story.js like so:

    import React from 'react';
import { storiesOf } from '@storybook/react';
import { action } from '@storybook/addon-actions';
import { linkTo } from '@storybook/addon-links';