- Buttons Print buttons with nub down and supports. This worked best for me and my 3d printer
- Button stopper Put both x & y in to the drilled holes on your sp case, Place your stopper and use a small amount of hot glue or two part epoxy(less is more with epoxy) to hold it in place
- 2.8 & 3.2 screen frame 2.8 is simple, remove the metal braket on the back of the lcd and slide it into the printed frame and install. 3.2 - You will need to mod your sp case, lcd and remove the metal braket, Slide it into the printed part and install it into your case. This does need a bit of work to get it to fit in but you should not need to mod anything. 3.2 printing - I found printing the face up worked much better than printing it down, you will need suports.
- Battery stopper I found that the sp case did not support the battery connector well and I had it actually bend back. This should simply slide into your sp case without modding it and help support the connector.
Thanks and enjoy!!!!!