Slic3r_config_bundle.ini

# generated by Slic3r 1.1.7 on Sat Jan 17 20:34:31 2015

[filament:Delta1]
bed_temperature = 0
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.75
first_layer_bed_temperature = 45
first_layer_temperature = 208
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
slowdown_below_layer_time = 30
temperature = 208

[filament:PLA1]
bed_temperature = 0
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.75
first_layer_bed_temperature = 45
first_layer_temperature = 175
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
slowdown_below_layer_time = 30
temperature = 172

[presets]
filament = Delta1.ini
print = Delta1.ini
printer = Delta1.ini

[print:Delta1]
avoid_crossing_perimeters = 1
bottom_solid_layers = 2
bridge_acceleration = 3750
bridge_flow_ratio = 1
bridge_speed = 150
brim_width = 0
complete_objects = 0
default_acceleration = 3500
dont_support_bridges = 1
external_perimeter_speed = 140
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 20%
fill_pattern = rectilinear
first_layer_acceleration = 3500
first_layer_extrusion_width = 145%
first_layer_height = 0.35
first_layer_speed = 15%
gap_fill_speed = 100
gcode_comments = 1
infill_acceleration = 3750
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 140
interface_shells = 0
layer_height = 0.3
min_skirt_length = 0
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 3750
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 150
perimeters = 2
post_process = 
raft_layers = 0
resolution = 0
seam_position = random
skirt_distance = 3
skirt_height = 5
skirts = 0
small_perimeter_speed = 125
solid_fill_pattern = rectilinear
solid_infill_below_area = 20
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 120
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 150
support_material_threshold = 0
thin_walls = 1
threads = 2
top_infill_extrusion_width = 0
top_solid_infill_speed = 100
top_solid_layers = 2
travel_speed = 155

[print:Delta1spiral]
avoid_crossing_perimeters = 1
bottom_solid_layers = 0
bridge_acceleration = 3200
bridge_flow_ratio = 1
bridge_speed = 140
brim_width = 0
complete_objects = 0
default_acceleration = 3500
dont_support_bridges = 1
external_perimeter_speed = 120
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 0%
fill_pattern = rectilinear
first_layer_acceleration = 3500
first_layer_extrusion_width = 125%
first_layer_height = 0.35
first_layer_speed = 15%
gap_fill_speed = 100
gcode_comments = 1
infill_acceleration = 3750
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 140
interface_shells = 0
layer_height = 0.3
min_skirt_length = 0
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 3750
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 120
perimeters = 1
post_process = 
raft_layers = 0
resolution = 0
seam_position = random
skirt_distance = 3
skirt_height = 1
skirts = 0
small_perimeter_speed = 100
solid_fill_pattern = rectilinear
solid_infill_below_area = 20
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 85
spiral_vase = 1
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 150
support_material_threshold = 0
thin_walls = 1
threads = 2
top_infill_extrusion_width = 0
top_solid_infill_speed = 75
top_solid_layers = 0
travel_speed = 145

[print:Delta_JOE]
avoid_crossing_perimeters = 1
bottom_solid_layers = 2
bridge_acceleration = 3750
bridge_flow_ratio = 1
bridge_speed = 100
brim_width = 0
complete_objects = 0
default_acceleration = 3500
dont_support_bridges = 1
external_perimeter_speed = 75
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 20%
fill_pattern = rectilinear
first_layer_acceleration = 3500
first_layer_extrusion_width = 150%
first_layer_height = 0.3
first_layer_speed = 30%
gap_fill_speed = 100
gcode_comments = 1
infill_acceleration = 3750
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 100
interface_shells = 0
layer_height = 0.2
min_skirt_length = 0
notes = 
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 3750
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 75
perimeters = 2
post_process = 
raft_layers = 0
resolution = 0
seam_position = random
skirt_distance = 2
skirt_height = 1
skirts = 1
small_perimeter_speed = 75
solid_fill_pattern = rectilinear
solid_infill_below_area = 5
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 100
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 75
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 100
support_material_threshold = 0
thin_walls = 1
threads = 2
top_infill_extrusion_width = 125%
top_solid_infill_speed = 30
top_solid_layers = 2
travel_speed = 100

[print:Delta_JOE_spiral_vase]
avoid_crossing_perimeters = 1
bottom_solid_layers = 0
bridge_acceleration = 3750
bridge_flow_ratio = 1
bridge_speed = 100
brim_width = 0
complete_objects = 0
default_acceleration = 3500
dont_support_bridges = 1
external_perimeter_speed = 75
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 0%
fill_pattern = rectilinear
first_layer_acceleration = 3500
first_layer_extrusion_width = 145%
first_layer_height = 0.35
first_layer_speed = 30%
gap_fill_speed = 100
gcode_comments = 1
infill_acceleration = 3750
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 100
interface_shells = 0
layer_height = 0.3
min_skirt_length = 0
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 3750
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 75
perimeters = 1
post_process = 
raft_layers = 0
resolution = 0
seam_position = random
skirt_distance = 2
skirt_height = 1
skirts = 1
small_perimeter_speed = 75
solid_fill_pattern = rectilinear
solid_infill_below_area = 20
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 100
spiral_vase = 1
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 75
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 100
support_material_threshold = 0
thin_walls = 1
threads = 2
top_infill_extrusion_width = 0
top_solid_infill_speed = 75
top_solid_layers = 0
travel_speed = 100

[print:PLA1]
avoid_crossing_perimeters = 1
bottom_solid_layers = 2
bridge_acceleration = 3200
bridge_flow_ratio = 1
bridge_speed = 125
brim_width = 0
complete_objects = 0
default_acceleration = 3500
dont_support_bridges = 1
external_perimeter_speed = 140
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 20%
fill_pattern = rectilinear
first_layer_acceleration = 3500
first_layer_extrusion_width = 145%
first_layer_height = 0.35
first_layer_speed = 40
gap_fill_speed = 100
gcode_comments = 1
infill_acceleration = 3750
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 140
interface_shells = 0
layer_height = 0.3
min_skirt_length = 0
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 3750
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 125
perimeters = 2
post_process = 
raft_layers = 0
resolution = 0
seam_position = random
skirt_distance = 3
skirt_height = 5
skirts = 0
small_perimeter_speed = 100
solid_fill_pattern = rectilinear
solid_infill_below_area = 20
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 65
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 100
support_material_threshold = 0
thin_walls = 1
threads = 2
top_infill_extrusion_width = 0
top_solid_infill_speed = 55
top_solid_layers = 2
travel_speed = 145

[print:PLAspiral]
avoid_crossing_perimeters = 1
bottom_solid_layers = 0
bridge_acceleration = 3200
bridge_flow_ratio = 1
bridge_speed = 140
brim_width = 0
complete_objects = 0
default_acceleration = 3500
dont_support_bridges = 1
external_perimeter_speed = 140
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 0%
fill_pattern = rectilinear
first_layer_acceleration = 3500
first_layer_extrusion_width = 145%
first_layer_height = 0.35
first_layer_speed = 15%
gap_fill_speed = 100
gcode_comments = 1
infill_acceleration = 3750
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 140
interface_shells = 0
layer_height = 0.3
min_skirt_length = 0
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 3750
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 120
perimeters = 1
post_process = 
raft_layers = 0
resolution = 0
seam_position = random
skirt_distance = 3
skirt_height = 1
skirts = 1
small_perimeter_speed = 100
solid_fill_pattern = rectilinear
solid_infill_below_area = 20
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 85
spiral_vase = 1
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 150
support_material_threshold = 0
thin_walls = 1
threads = 2
top_infill_extrusion_width = 0
top_solid_infill_speed = 75
top_solid_layers = 0
travel_speed = 145

[printer:Delta1]
bed_size = 200,200
end_gcode = M104 S0 ; turn off temperature\n\nM84     ; disable motors\n
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode = 
nozzle_diameter = 0.4
print_center = 100,100
retract_before_travel = 2.5
retract_layer_change = 1
retract_length = 3
retract_length_toolchange = 0
retract_lift = 1
retract_restart_extra = -0.2
retract_restart_extra_toolchange = 0
retract_speed = 45
start_gcode = \nG1 Z5 F5000 ; lift nozzle\n
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
vibration_limit = 0
wipe = 0
z_offset = 0

[printer:PLA1]
bed_size = 200,200
end_gcode = M104 S0 ; turn off temperature\n\nM84     ; disable motors\n
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode = 
nozzle_diameter = 0.4
print_center = 100,100
retract_before_travel = 2.5
retract_layer_change = 1
retract_length = 3.2
retract_length_toolchange = 0
retract_lift = 1.2
retract_restart_extra = -0.2
retract_restart_extra_toolchange = 0
retract_speed = 45
start_gcode = \nG1 Z5 F5000 ; lift nozzle\n
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
vibration_limit = 0
wipe = 0
z_offset = 0

[settings]
autocenter = 1
mode = expert