Failed Settings validated -> ERROR: Invalid setting: platform_type when in platform type other

[jasonleekennedy]

I am trying to setup a custom mixer config to work and used 'other' as my configuration doesn't match any of the per-existing options, however I am getting a red X on Setting validation and getting the error: Invalid setting: platform_type. Is 'Other' not a valid option, do I need to try to 'hack' it to work on one of the other settings.

Status below:

# status
System Uptime: 79 seconds
Current Time: 2041-06-28T01:04:00.000+00:00
Voltage: 11.18V (3S battery - OK)
CPU Clock=168MHz, GYRO=MPU6000, ACC=MPU6000, BARO=BMP280
STM32 system clocks:
  SYSCLK = 168 MHz
  HCLK   = 168 MHz
  PCLK1  = 42 MHz
  PCLK2  = 84 MHz
Sensor status: GYRO=OK, ACC=OK, MAG=NONE, BARO=OK, RANGEFINDER=NONE, OPFLOW=NONE, GPS=NONE
SD card: Startup failed
Stack size: 6144, Stack address: 0x10010000, Heap available: 1728
I2C Errors: 0, config size: 6516, max available config: 131072
ADC channel usage:
   BATTERY : configured = ADC 1, used = ADC 1
      RSSI : configured = ADC 3, used = none
   CURRENT : configured = ADC 2, used = ADC 2
  AIRSPEED : configured = none, used = none
System load: 4, cycle time: 1007, PID rate: 993, RX rate: 91, System rate: 9
Arming disabled flags: THR CLI SETTINGFAIL
### ERROR: Invalid setting: platform_type
VTX: not detected

google search doesn't seem to be finding anything related to the error message in the status output.

[DzikuVx]

No, currently OTHER is not a valid option and your build should base on either MR, AIRPLANE, TRI, ROVER or BOAT