arm-eabi-all-5.1

#!/bin/bash
# Copyright (C) 2015 Joe Maples
# Copyright (C) 2015 The SaberMod Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
# This scripts is to build all of my arm-eabi toolchains and upload them to GitHub.
#
export SET_SM_GCC_VERSION=5.1.0 && export GCC_COLORS='error=01;31:warning=01;35:note=01;36:caret=01;32:locus=01:quote=01' && export DATE=`date +%Y-%m-%d` && export target_cpu=cortex_a15 && export TARGET_CPU_VARIANT=krait;
JOBS="$(cat /proc/cpuinfo | grep -c processor)";
OPT_JOBS=$(bc <<< "($JOBS-1)*2")
MAKE_FLAGS="-j$OPT_JOBS";

############################################################
############################################################
#####                                                  #####
#####                 TUNEABLE VARIABLES               #####
#####                                                  #####
############################################################
############################################################
export CPU=cortex_a15;
export FPU=neon-vfpv4;
export linaro_dir=~/linaro/build;
export sm_dir=~/sm/build-scripts;
###################
## END TUNEABLES ##
###################

build linaro(){
cd $linaro_dir;
echo "Building Linaro";
export GIT_FETCH="git fetch https://git.linaro.org/toolchain/gcc-mirror.git gcc-5-branch";
export SET_CLOOG_VERSION=current && export SET_ISL_VERSION=current
export GCC=Linaro;
export VERSION=Linaro;
build; &> /dev/null
}

build linaromod(){
cd $sm_dir;
echo "Building LinaroMod";
export GIT_FETCH="git fetch https://git.linaro.org/toolchain/gcc.git master";
export SET_CLOOG_VERSION=0.18.3 && export SET_ISL_VERSION=0.14;
export GCC=Linaro;
export VERSION=LinaroMod;
export GCC2=SaberMod;
build; &> /dev/null
}

build sabernaro(){
cd $linaro_dir;
echo "Building SaberNaro";
export GIT_FETCH="git fetch https://github.com/SaberMod/GCC_SaberMod $SET_SM_GCC_VERSION";
export SET_CLOOG_VERSION=current && export SET_ISL_VERSION=current;
export GCC=SaberMod;
export GCC2=Linaro;
export VERSION=SaberNaro;
build; &> /dev/null
}

build(){
# Attempt to speed up compilation by linking everything to /tmp filesystem
# Also find toolchain root
if [ -e /tmp/$VERSION ];
then
    rm -rf /tmp/$VERSION;
fi;
cd ../;
export TOOLCHAIN_ROOT="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )";
cd /tmp && ln -s $TOOLCHAIN_ROOT /tmp/$VERSION && cd /tmp/$VERSION;

export TOOLCHAIN_ROOT_SYMBOLIC="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )";

# Make sure gcc is on the right remote branch 5.0.x
cd $TOOLCHAIN_ROOT_SYMBOLIC/gcc/gcc-$GCC && rm -rf * && git reset --hard && $GIT_FETCH && git checkout FETCH_HEAD && cd $TOOLCHAIN_ROOT_SYMBOLIC/build;

# Build PATH
export BUILD_PATH="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )";

# Try to parallelize the build for faster performance.
export JOBS="$(cat /proc/cpuinfo | grep -c processor)";

# Make a clean build
if [ -e Makefile ];
then
    make $MAKE_FLAGS clean;
    make $MAKE_FLAGS distclean;
fi;

# Remove all untracked files and directories in git
if [ -d gmp-gnu ];
then
    rm -rf gmp-gnu;
fi;

export PREFIX_PATH=~/hyper/$VERSION-arm-eabi-5.0-$DATE;
export PREFIX=--prefix=$PREFIX_PATH;

if [ -d "$PREFIX_PATH" ];
then
    rm -rf $PREFIX_PATH;
    mkdir -p $PREFIX_PATH;
else
    mkdir -p $PREFIX_PATH;
fi;

export GCC_INSTALLED=$PREFIX_PATH/bin/arm-eabi-gcc;

# sysroot
cd $TOOLCHAIN_ROOT_SYMBOLIC/sysroot && rm -rf * && git reset --hard && git fetch sm gcc-5.0 && git checkout FETCH_HEAD && cd $BUILD_PATH;
export SYSROOT_SRC_PATH=$TOOLCHAIN_ROOT_SYMBOLIC/sysroot/arch-arm;
export SYSROOT_DEST_PATH=$PREFIX_PATH/arch-arm;
cp -R $SYSROOT_SRC_PATH -f $SYSROOT_DEST_PATH;
export SYSROOT=--with-sysroot=$SYSROOT_DEST_PATH;

# Build and install cloog, isl and osl libraries into the toolchain sysroot environment.

# GMP
cd $TOOLCHAIN_ROOT_SYMBOLIC/gmp/gmp-gnu;
export GMP_PATH="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )";

# CLOOG
export CLOOG_PREFIX_PATH=$SYSROOT_DEST_PATH/usr;
export CLOOG_PREFIX=--prefix=$CLOOG_PREFIX_PATH;

# Cloog Build Configuration
cd $TOOLCHAIN_ROOT_SYMBOLIC/cloog/cloog-$SET_CLOOG_VERSION && ./configure $CLOOG_PREFIX --with-isl=bundled --with-osl=bundled --with-gmp=system;

make $MAKE_FLAGS;
make install;

# cleanup
make $MAKE_FLAGS clean;
make $MAKE_FLAGS distclean;

# untracked files
rm -rf cloog-isl-uninstalled.pc cloog-isl-uninstalled.sh cloog-isl.pc cloog-isl.pc.in doc/gitversion.texi version.h isl/gitversion.h isl/include/isl/stdint.h isl/isl-uninstalled.pc isl/isl-uninstalled.sh isl/isl.pc isl/isl.pc.in;

git reset --hard;

# make libs available for ld
export SYSROOT_LIB_PATH=$SYSROOT_DEST_PATH/usr/lib;
export LD_LIBRARY_PATH=$SYSROOT_LIB_PATH;

export CLOOG_INSTALLED=$SYSROOT_LIB_PATH/libcloog-isl.so.4
export SET_TARGET_BUILD=CLOOG;

cd $BUILD_PATH;

# Did we make it?
if [ -e $CLOOG_INSTALLED ];
then

    # Make a system link for older version of libisl using the newer version for older systems
    cd $SYSROOT_LIB_PATH && ln -s libisl.so.13.1.0 libisl.so.10 && cd $BUILD_PATH;
    ./build-success;
    sleep 5;

    # GCC Build Configuration
    ./configure $PREFIX $SYSROOT --host=x86_64-linux-gnu --build=x86_64-linux-gnu --target=arm-eabi --program-transform-name='s&^&arm-eabi-&' --with-gcc-version=$GCC --with-pkgversion='Hyper-$VERSION-5.0.x_arm-graphite' --with-binutils-version=android --with-gmp-version=gnu --with-mpfr-version=gnu --with-mpc-version=gnu --with-gdb-version=android --with-cloog-version=$SET_CLOOG_VERSION --with-isl-version=$SET_ISL_VERSION --enable-graphite=yes --enable-plugins --enable-threads --enable-ld=default --disable-option-checking --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm' --disable-bootstrap "--enable-eh-frame-hdr-for-static" --with-cpu=$CPU --with-tune=$CPU --with-fpu=$FPU;

    # Build the toolchain
    make $MAKE_FLAGS;

    # Install the toolchain (twice)
    make install && make install;

    export SET_TARGET_BUILD=GCC;

    # Did we make it?
    if [ -e $GCC_INSTALLED ];
    then
        ./build-success;
        cp $sm_dir/.gitignore $PREFIX_PATH/.gitignore
    else
        ./build-failed;
    fi;
else
    ./build-failed;
fi;

cd ~;
}

changelog(){
	#!/bin/sh
export Changelog=Changelog.txt

if [ -f $Changelog ];
then
	rm -f $Changelog
fi

touch $Changelog

# Print something to build output
echo ${bldppl}"Generating changelog..."${txtrst}

for i in $(seq 5);
do
export After_Date=`date --date="10 days ago" +%m-%d-%Y`
k=$(expr $i - 1)
	export Until_Date=`date --date="0 days ago" +%m-%d-%Y`

	# Line with after --- until was too long for a small ListView
	echo '====================' >> $Changelog;
	echo  "     "$Until_Date       >> $Changelog;
	echo '===================='	>> $Changelog;
	echo >> $Changelog;

	# Cycle through every repo to find commits between 2 dates
	repo forall -pc 'git log --oneline --after=$After_Date --until=$Until_Date' >> $Changelog
	echo >> $Changelog;
done

sed -i 's/project/   */g' $Changelog

cp $Changelog $PREFIX_PATH/
rm -rf $Changelog
}

upload(){
	echo "Uploading Build";
	# Add README
	cd $PREFIX_PATH;
	touch README.mkdn;
	echo " $VERSION ARM-EABI 5.0
----------------------
This toolchain was built using $GCC GCC, but in a $GCC2 build environment ($GCC2 binutils, gdb, cloog, etc.) with the exception of using the latest ISL." >> README.mkdn;

	git init && git add -A && git commit -m "Update build to $DATE" -s && git push -f https://bitbucket.com/hyper-toolchains/$VERSION-arm-eabi-5.1.git master; &> /dev/null
}