diff --git a/s3 b/s3
new file mode 100644
index 0000000..37d2d84
--- /dev/null
+++ b/s3
@@ -0,0 +1,266 @@
+#!/bin/bash
+
+#VERSIONCOUNTER 20190205
+SIMPLEVERSION="3.0 RC4";OIFS=$IFS;
+export NCURSES_NO_UTF8_ACS=1;
+
+#set dir_vars
+  workdir="$(pwd)";
+   svndir="$workdir/oscam-svn";
+     sdir="$workdir/support";
+    osdir="$sdir/os";
+     ldir="$sdir/logs";
+     adir="$sdir/archive";
+configdir="$sdir/configs";
+     pdir="$sdir/patches";
+  profdir="$sdir/profiles";
+     bdir="$sdir/binaries";
+    dldir="$sdir/downloads";
+     fdir="$sdir/functions";
+  menudir="$sdir/menu_save";
+     bsvn="$sdir/backup_svn";
+    tcdir="$sdir/toolchains";
+     tdir="$sdir/translation";
+ tccfgdir="$sdir/toolchains.cfg";
+   bindir="$sdir/upx";PATH="$bindir:$PATH";
+
+# create folders
+mkdir -p support/{archive,binaries,configs,downloads,functions,logs,os,patches,profiles,toolchains,toolchains.cfg,translation,backup_svn,menu_save,upx} 2>/dev/null;
+mkdir -p "$tcdir/native/bin" 2>/dev/null;
+
+# create links
+[ ! -L "$workdir/logs" ]     && ln -sf "$ldir" "$workdir/logs"     2>/dev/null;
+[ ! -L "$workdir/archive" ]  && ln -sf "$adir" "$workdir/archive"  2>/dev/null;
+[ ! -L "$workdir/patches" ]  && ln -sf "$pdir" "$workdir/patches"  2>/dev/null;
+[ ! -L "$workdir/binaries" ] && ln -sf "$bdir" "$workdir/binaries" 2>/dev/null;
+
+#set arrays
+unset INTERNAL_MODULES; unset ENABLED_MODULES; unset SHORT_MODULENAMES;  unset INST_TCLIST;
+unset DISABLED_MODULES; unset AVAI_TCLIST;     unset ALL_MODULES_LONG;   unset MISS_TCLIST;
+unset SHORT_PROTOCOLS;  unset SHORT_READERS;   unset SHORT_CARD_READERS; unset SHORT_ADDONS;
+unset SSH_CONF_CONTENT; unset USE_vars;        unset USE_vars_disable;
+
+declare -A USE_vars;
+declare -A USE_vars_disable;
+USE_vars[USE_TARGZ]=;
+USE_vars[USE_PATCH]=;
+USE_vars[USE_STAPI]=;
+USE_vars[USE_STAPI5]=;
+USE_vars[USE_CONFDIR]=;
+USE_vars[USE_COMPRESS]=;
+
+declare -A s3cfg_vars;
+s3cfg_vars[USE_TARGZ]=0;
+s3cfg_vars[DIRECTMENU]=0;
+s3cfg_vars[USE_VERBOSE]=0;
+s3cfg_vars[USE_COMPRESS]=0;
+s3cfg_vars[S3_UPDATE_CHECK]=1;
+s3cfg_vars[SAVE_LISTSMARGO]=1;
+s3cfg_vars[NO_SVN_AUTOUPDATE]=0;
+s3cfg_vars[delete_oscamdebugbinary]=1;
+
+declare -a ENABLED_MODULES;  declare -a DISABLED_MODULES;   declare -a SHORT_MODULENAMES;
+declare -a ALL_MODULES_LONG; declare -a AVAI_TCLIST;        declare -a INST_TCLIST;
+declare -a MISS_TCLIST;      declare -a SHORT_ADDONS;       declare -a SHORT_PROTOCOLS;
+declare -a SHORT_READERS;    declare -a SHORT_CARD_READERS; declare -A INTERNAL_MODULES;
+
+#filled arrays
+config_cases=( all addons protocols readers card_readers );
+s3opts=( help cedit clean tccheck tcrepair upload lang_select loadonly checkout ssh_profiles syscheck sysinfo svnup menu get_patch tedit svnpatch profiles svnrestore ); # extendable with plugins
+CUSTOM_CONFDIR="not_set";
+
+#internal vars
+OPENBOX=0;UFS916003=0;_verbose="";
+_t1e="VG9vbGNoYWluLQ==";
+_u1e="aHR0cDovL3N0cmVhbWJvYXJkLnR2L3diYjIvdHV0LXBpY3MvdG9vbGNoYWlucw==";
+cposx=0;cposy=0;off="_off";on="_on";pf="empty";file_exist="0";run="0";
+s3cfg="$configdir/simplebuild.config";loadprofile="no";menucall="no";
+# Compiler settings
+cc_warn="-W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition";
+cc_opts="-ggdb -pipe -ffunction-sections -fdata-sections";
+
+#default url
+trunkurl="http://www.streamboard.tv/svn/oscam/trunk";[ -f "$workdir/oscamsource.url" ] && source "$workdir/oscamsource.url";
+#trunkurl="http://www.streamboard.tv/svn/oscam-addons/modern";[ -f "$workdir/oscamsource.url" ] && source "$workdir/oscamsource.url";
+
+#load translationlist
+cd "$tdir";langsupport=(*);
+
+#load functions and plugins
+if [ -d "$fdir" ];then
+	cd "$fdir";
+	x=(*);
+	for i in "${x[@]}";do
+		source "$i";
+		plugin=$(awk '/^#simplebuild_plugin/ {printf $2}' $i);
+		[ ! -z "$plugin" ] && s3opts+=($plugin);
+	done;
+else
+	echo "fail functions";
+fi;
+
+#begin
+initializeANSI; #load colors
+
+#check system
+syscheck;[ ! "$sanity" == "1" ] && echo "sanity fail" && sleep 5 && bye;
+
+#initialize simplebuild
+_create_native_profile;	# put native datas to toolchains and configs
+auto_langset;			# echo "info $txt_load_ok";
+_get_config_con "$1";	# echo $addons;exit;
+_create_module_arrays;	# fill module arrays
+_fill_tc_array;			# get # AVAI_TCLIST # INST_TCLIST # MISS_TCLIST
+read_s3cfg;				# read simplebuild config
+_set_dialog_types;		# fill $gui vars
+_systype;				# check used uname
+
+if [ ! -n "$1" ];then
+	[ "${s3cfg_vars[DIRECTMENU]}" == "1" ] && _dialog_checkout && exit;
+	_help;
+	exit;
+else
+	for e in "${s3opts[@]}";do
+		if [ "$e" == "$1" ];then
+			case $e in
+			svnrestore|\
+			checkout|\
+			upload_cam)	if [ ! -n "$2" ];then
+							eval "$e";
+						else
+							eval "$e" "$2";
+						fi;
+						exit;;
+			menu)		if [ ! -n "$2" ];then
+							_dialog_checkout;
+						else
+							_dialog_checkout "$2";
+						fi;;
+			loadonly)	if [ ! -n "$2" ];then
+							_nl;
+							clear;
+							s3logo;
+							echo -e "$r_l\n  $txt_error: toolchain $txt_parameter $txt_missing\n""$w_l";
+							_help_toolchain;
+							sleep 2;
+							exit;
+						else
+							for t in "${AVAI_TCLIST[@]}";do
+								_tmp="$2";
+								[ "$t" == "$2" ] && _load_toolchain "$2" && break;
+							done;
+							if [ -f "$tc_dl" ];then
+								echo -e "$p_l\n\n  toolchain for $_tmp loaded\n";
+							else
+								_nl;
+								clear;
+								s3logo;
+								echo -e "$r_l  toolchain missing/error\n";
+							fi;
+							exit;
+						fi;;
+			tccheck)	if [ ! -n "$2" ];then
+							_nl;
+							clear;
+							s3logo;
+							echo -e "$r_l\n  $txt_error: toolchain $txt_parameter $txt_missing\n""$w_l";
+							_help_toolchain;echo -e "$W";
+							sleep 2;
+							exit;
+						else
+							for t in "${AVAI_TCLIST[@]}";do
+								[ "$t" == "$2" ] && _toolchain_check "$2" && break;
+							done;
+							_nl;
+							clear;
+							s3logo;
+							echo -e "$r_l\n  toolchain missing/error\n$w_l";
+							_help_toolchain;echo -e "$W";
+							sleep 2;
+							exit;
+						fi;;
+			tcrepair)	if [ ! -n "$2" ];then
+							_nl;
+							clear;
+							s3logo;
+							echo -e "$r_l\n  $txt_error: toolchain $txt_parameter $txt_missing\n""$w_l";
+							_help_toolchain;echo -e "$W";
+							sleep 2;
+							exit;
+						else
+							_nl;clear;_toolchain_repair "$2";sleep 2;exit;
+						fi;;
+			upload)		if [ ! -n "$2" ];then
+							_nl;
+							clear;
+							s3logo;
+							echo -e "$r_l\n  $txt_error: $txt_parameter $txt_missing""$w_l";
+							menucall="yes";
+							ssh_profiles;
+						else
+							upload_cam "$2";
+						fi;
+						exit;;
+			tedit)		if [ -n "$2" ];then
+							for telement in ${INST_TCLIST[@]};do
+								if [ "$telement" == "$2" ];then
+									tedit $2;
+									exit;
+								fi;
+							done;
+							clear;
+							s3logo;
+							echo -e $w_l"\n  $2 toolchain not installed\n"$W;
+						fi;
+						exit;;
+			help)		_help;
+						exit;;
+			*)			eval "$e" "$2";
+						exit;;
+			esac;
+		fi;
+	done;
+
+	for t in "${AVAI_TCLIST[@]}";do
+		if [ "$t" == "$1" ];then
+			if [ "${2:0:3}" == "-p=" ] || [ "${2:0:3}" == "-P=" ];then
+				if [ -f "$profdir/${2#*=}" ];then
+					pf=$(cat "$profdir/${2#*=}");
+					pf_name="${2#*=}";
+				fi;
+			fi;
+			[ "$pf" == "empty" ] && c_m_d="$*" || c_m_d="all_off $pf $*"; # set only active module with profiles
+			for cmd in $c_m_d;do
+				if [ "${cmd:0:3}" == "-c=" ] || [ "${cmd:0:3}" == "-C=" ];then
+					CUSTOM_CONFDIR="${cmd#*=}";
+				fi;
+				for cc in "${config_cases[@]}";
+				do
+					[ "$cmd" == "$cc$on" ]  && all_cc+=($cc$on) && break;
+					[ "$cmd" == "$cc$off" ] && all_cc+=($cc$off) && break;
+				done;
+				for sm in "${SHORT_MODULENAMES[@]}";
+				do
+					[ "$cmd" == "$sm" ]     && all_cc+=($(get_module_name "$sm")$on) && break;
+					[ "$cmd" == "$sm$off" ] && all_cc+=($(get_module_name "$sm")$off) && break;
+				done;
+				for uvar in "${!USE_vars[@]}";
+				do
+					[ "$cmd" == "$uvar" ]             && USE_vars[$uvar]="$uvar=1" && break;
+					[ "$cmd" == "$uvar$off" ] && USE_vars_disable[$uvar]="$uvar=1" && break;
+				done;
+				case $cmd in
+					OPENBOX)  OPENBOX=1;;
+					UFS916003) UFS916003=1;;
+					USE_VERBOSE) s3cfg_vars[USE_VERBOSE]=1;;
+				esac;
+			done;
+			_pre_build "$t";
+			exit;
+		fi;
+	done;
+	_help;
+
+fi;
+
+exit;
diff --git a/support/configs/Makefile.master b/support/configs/Makefile.master
new file mode 100644
index 0000000..8ea5677
--- /dev/null
+++ b/support/configs/Makefile.master
@@ -0,0 +1,795 @@
+SHELL = /bin/sh
+
+.SUFFIXES:
+.SUFFIXES: .o .c
+.PHONY: all tests help README.build README.config simple default debug config menuconfig allyesconfig allnoconfig defconfig clean distclean
+
+VER     := $(shell ./config.sh --oscam-version)
+SVN_REV := $(shell ./config.sh --oscam-revision)
+
+uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo not')
+
+# This let's us use uname_S tests to detect cygwin
+ifneq (,$(findstring CYGWIN,$(uname_S)))
+	uname_S := Cygwin
+endif
+
+LINKER_VER_OPT:=-Wl,--version
+
+# Find OSX SDK
+ifeq ($(uname_S),Darwin)
+	# Setting OSX_VER allows you to choose prefered version if you have
+	# two SDKs installed. For example if you have 10.6 and 10.5 installed
+	# you can choose 10.5 by using 'make USE_PCSC=1 OSX_VER=10.5'
+	# './config.sh --detect-osx-sdk-version' returns the newest SDK if
+	# SDK_VER is not set.
+	OSX_SDK := $(shell ./config.sh --detect-osx-sdk-version $(OSX_VER))
+	LINKER_VER_OPT:=-Wl,-v
+endif
+
+ifeq "$(shell ./config.sh --enabled WITH_SSL)" "Y"
+	override USE_SSL=1
+	override USE_LIBCRYPTO=1
+endif
+ifdef USE_SSL
+	override USE_LIBCRYPTO=1
+endif
+
+CONF_DIR = /usr/local/etc
+
+LIB_PTHREAD = -lpthread
+LIB_DL = -ldl
+
+LIB_RT :=
+ifeq ($(uname_S),Linux)
+	ifeq "$(shell ./config.sh --enabled CLOCKFIX)" "Y"
+		LIB_RT := -lrt
+	endif
+endif
+ifeq ($(uname_S),FreeBSD)
+	LIB_DL :=
+endif
+
+override STD_LIBS := -lm $(LIB_PTHREAD) $(LIB_DL) $(LIB_RT)
+override STD_DEFS := -D'CS_SVN_VERSION="$(SVN_REV)"'
+override STD_DEFS += -D'CS_CONFDIR="$(CONF_DIR)"'
+
+# Compiler warnings
+CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
+
+# Compiler optimizations
+CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections
+
+CC = $(CROSS_DIR)$(CROSS)gcc
+STRIP = $(CROSS_DIR)$(CROSS)strip
+
+LDFLAGS = -Wl,--gc-sections
+
+# The linker for powerpc have bug that prevents --gc-sections from working
+# Check for the linker version and if it matches disable --gc-sections
+# For more information about the bug see:
+#   http://cygwin.com/ml/binutils/2005-01/msg00103.html
+# The LD output is saved into variable and then processed, because if
+# the output is piped directly into another command LD creates 4 files
+# in your /tmp directory and doesn't delete them.
+LINKER_VER := $(shell set -e; VER="`$(CC) $(LINKER_VER_OPT) 2>&1`"; echo $$VER | head -1 | cut -d' ' -f5)
+
+# dm500 toolchain
+ifeq "$(LINKER_VER)" "20040727"
+	LDFLAGS :=
+endif
+# dm600/7000/7020 toolchain
+ifeq "$(LINKER_VER)" "20041121"
+	LDFLAGS :=
+endif
+# The OS X linker do not support --gc-sections
+ifeq ($(uname_S),Darwin)
+	LDFLAGS :=
+endif
+
+# The compiler knows for what target it compiles, so use this information
+TARGET := $(shell $(CC) -dumpmachine 2>/dev/null)
+
+# Process USE_ variables
+DEFAULT_STAPI_LIB = -L./stapi -loscam_stapi
+DEFAULT_STAPI5_LIB = -L./stapi -loscam_stapi5
+DEFAULT_COOLAPI_LIB = -lnxp -lrt
+DEFAULT_COOLAPI2_LIB = -llnxUKAL -llnxcssUsr -llnxscsUsr -llnxnotifyqUsr -llnxplatUsr -lrt
+DEFAULT_SU980_LIB = -lentropic -lrt
+DEFAULT_AZBOX_LIB = -Lextapi/openxcas -lOpenXCASAPI
+DEFAULT_LIBCRYPTO_LIB = -lcrypto
+DEFAULT_SSL_LIB = -lssl
+ifeq ($(uname_S),Linux)
+	DEFAULT_LIBUSB_LIB = -lusb-1.0 -lrt
+else
+	DEFAULT_LIBUSB_LIB = -lusb-1.0
+endif
+# Since FreeBSD 8 (released in 2010) they are using their own
+# libusb that is API compatible to libusb but with different soname
+ifeq ($(uname_S),FreeBSD)
+	DEFAULT_LIBUSB_LIB = -lusb
+endif
+ifeq ($(uname_S),Darwin)
+	DEFAULT_LIBUSB_FLAGS = -I/opt/local/include
+	DEFAULT_LIBUSB_LIB = -L/opt/local/lib -lusb-1.0
+	DEFAULT_PCSC_FLAGS = -isysroot $(OSX_SDK)
+	DEFAULT_PCSC_LIB = -isysroot $(OSX_SDK) -framework IOKit -framework CoreFoundation -framework PCSC
+else
+	# Get the compiler's last include PATHs. Basicaly it is /usr/include
+	# but in case of cross compilation it might be something else.
+	#
+	# Since using -Iinc_path instructs the compiler to use inc_path
+	# (without add the toolchain system root) we need to have this hack
+	# to get the "real" last include path. Why we needs this?
+	# Well, the PCSC headers are broken and rely on having the directory
+	# that they are installed it to be in the include PATH.
+	#
+	# We can't just use -I/usr/include/PCSC because it won't work in
+	# case of cross compilation.
+	TOOLCHAIN_INC_DIR := $(strip $(shell echo | $(CC) -Wp,-v -xc - -fsyntax-only 2>&1 | grep include$ | tail -n 1))
+	DEFAULT_PCSC_FLAGS = -I$(TOOLCHAIN_INC_DIR)/PCSC -I$(TOOLCHAIN_INC_DIR)/../local/include/PCSC
+	DEFAULT_PCSC_LIB = -lpcsclite
+endif
+
+ifeq ($(uname_S),Cygwin)
+	DEFAULT_PCSC_LIB += -lwinscard
+endif
+
+DEFAULT_UTF8_FLAGS = -DWITH_UTF8
+
+# Function to initialize USE related variables
+#   Usage: $(eval $(call prepare_use_flags,FLAG_NAME,PLUS_TARGET_TEXT))
+define prepare_use_flags
+override DEFAULT_$(1)_FLAGS:=$$(strip -DWITH_$(1)=1 $$(DEFAULT_$(1)_FLAGS))
+ifdef USE_$(1)
+	$(1)_FLAGS:=$$(DEFAULT_$(1)_FLAGS)
+	$(1)_CFLAGS:=$$($(1)_FLAGS)
+	$(1)_LDFLAGS:=$$($(1)_FLAGS)
+	$(1)_LIB:=$$(DEFAULT_$(1)_LIB)
+	ifneq "$(2)" ""
+		override PLUS_TARGET:=$$(PLUS_TARGET)-$(2)
+	endif
+	override USE_CFLAGS+=$$($(1)_CFLAGS)
+	override USE_LDFLAGS+=$$($(1)_LDFLAGS)
+	override USE_LIBS+=$$($(1)_LIB)
+	override USE_FLAGS+=$$(if $$(USE_$(1)),USE_$(1))
+	endif
+endef
+
+# Initialize USE variables
+$(eval $(call prepare_use_flags,STAPI,stapi))
+$(eval $(call prepare_use_flags,STAPI5,stapi5))
+$(eval $(call prepare_use_flags,COOLAPI,coolapi))
+$(eval $(call prepare_use_flags,COOLAPI2,coolapi2))
+$(eval $(call prepare_use_flags,SU980,su980))
+$(eval $(call prepare_use_flags,AZBOX,azbox))
+$(eval $(call prepare_use_flags,MCA,mca))
+$(eval $(call prepare_use_flags,SSL,ssl))
+$(eval $(call prepare_use_flags,LIBCRYPTO,))
+$(eval $(call prepare_use_flags,LIBUSB,libusb))
+$(eval $(call prepare_use_flags,PCSC,pcsc))
+$(eval $(call prepare_use_flags,UTF8))
+
+# Add PLUS_TARGET and EXTRA_TARGET to TARGET
+ifdef NO_PLUS_TARGET
+	override TARGET := $(TARGET)$(EXTRA_TARGET)
+else
+	override TARGET := $(TARGET)$(PLUS_TARGET)$(EXTRA_TARGET)
+endif
+
+EXTRA_CFLAGS = $(EXTRA_FLAGS)
+EXTRA_LDFLAGS = $(EXTRA_FLAGS)
+
+# Add USE_xxx, EXTRA_xxx and STD_xxx vars
+override CC_WARN += $(EXTRA_CC_WARN)
+override CC_OPTS += $(EXTRA_CC_OPTS)
+override CFLAGS  += $(USE_CFLAGS) $(EXTRA_CFLAGS)
+override LDFLAGS += $(USE_LDFLAGS) $(EXTRA_LDFLAGS)
+override LIBS    += $(USE_LIBS) $(EXTRA_LIBS) $(STD_LIBS)
+
+override STD_DEFS += -D'CS_TARGET="$(TARGET)"'
+
+# Setup quiet build
+Q =
+SAY = @true
+ifndef V
+	Q = @
+	NP = --no-print-directory
+	SAY = @echo
+endif
+
+BINDIR := Distribution
+override BUILD_DIR := build
+OBJDIR := $(BUILD_DIR)/$(TARGET)
+
+# Include config.mak which contains variables for all enabled modules
+# These variables will be used to select only needed files for compilation
+-include $(OBJDIR)/config.mak
+
+OSCAM_BIN := $(BINDIR)/oscam-$(VER)$(SVN_REV)-$(subst cygwin,cygwin.exe,$(TARGET))
+TESTS_BIN := tests.bin
+LIST_SMARGO_BIN := $(BINDIR)/list_smargo-$(VER)$(SVN_REV)-$(subst cygwin,cygwin.exe,$(TARGET))
+
+# Build list_smargo-.... only when WITH_LIBUSB build is requested.
+ifndef USE_LIBUSB
+	override LIST_SMARGO_BIN =
+endif
+
+SRC-$(CONFIG_LIB_AES) += cscrypt/aes.c
+SRC-$(CONFIG_LIB_BIGNUM) += cscrypt/bn_add.c
+SRC-$(CONFIG_LIB_BIGNUM) += cscrypt/bn_asm.c
+SRC-$(CONFIG_LIB_BIGNUM) += cscrypt/bn_ctx.c
+SRC-$(CONFIG_LIB_BIGNUM) += cscrypt/bn_div.c
+SRC-$(CONFIG_LIB_BIGNUM) += cscrypt/bn_exp.c
+SRC-$(CONFIG_LIB_BIGNUM) += cscrypt/bn_lib.c
+SRC-$(CONFIG_LIB_BIGNUM) += cscrypt/bn_mul.c
+SRC-$(CONFIG_LIB_BIGNUM) += cscrypt/bn_print.c
+SRC-$(CONFIG_LIB_BIGNUM) += cscrypt/bn_shift.c
+SRC-$(CONFIG_LIB_BIGNUM) += cscrypt/bn_sqr.c
+SRC-$(CONFIG_LIB_BIGNUM) += cscrypt/bn_word.c
+SRC-$(CONFIG_LIB_BIGNUM) += cscrypt/mem.c
+SRC-$(CONFIG_LIB_DES) += cscrypt/des.c
+SRC-$(CONFIG_LIB_IDEA) += cscrypt/i_cbc.c
+SRC-$(CONFIG_LIB_IDEA) += cscrypt/i_ecb.c
+SRC-$(CONFIG_LIB_IDEA) += cscrypt/i_skey.c
+SRC-y += cscrypt/md5.c
+SRC-$(CONFIG_LIB_RC6) += cscrypt/rc6.c
+SRC-$(CONFIG_LIB_SHA1) += cscrypt/sha1.c
+SRC-$(CONFIG_LIB_MDC2) += cscrypt/mdc2.c
+SRC-$(CONFIG_LIB_FAST_AES) += cscrypt/fast_aes.c
+SRC-$(CONFIG_LIB_SHA256) += cscrypt/sha256.c
+
+SRC-$(CONFIG_WITH_CARDREADER) += csctapi/atr.c
+SRC-$(CONFIG_WITH_CARDREADER) += csctapi/icc_async.c
+SRC-$(CONFIG_WITH_CARDREADER) += csctapi/io_serial.c
+SRC-$(CONFIG_WITH_CARDREADER) += csctapi/protocol_t0.c
+SRC-$(CONFIG_WITH_CARDREADER) += csctapi/protocol_t1.c
+SRC-$(CONFIG_CARDREADER_INTERNAL_AZBOX) += csctapi/ifd_azbox.c
+SRC-$(CONFIG_CARDREADER_INTERNAL_COOLAPI) += csctapi/ifd_cool.c
+SRC-$(CONFIG_CARDREADER_INTERNAL_COOLAPI2) += csctapi/ifd_cool.c
+SRC-$(CONFIG_CARDREADER_DB2COM) += csctapi/ifd_db2com.c
+SRC-$(CONFIG_CARDREADER_MP35) += csctapi/ifd_mp35.c
+SRC-$(CONFIG_CARDREADER_PCSC) += csctapi/ifd_pcsc.c
+SRC-$(CONFIG_CARDREADER_PHOENIX) += csctapi/ifd_phoenix.c
+SRC-$(CONFIG_CARDREADER_DRECAS) += csctapi/ifd_drecas.c
+SRC-$(CONFIG_CARDREADER_SC8IN1) += csctapi/ifd_sc8in1.c
+SRC-$(CONFIG_CARDREADER_INTERNAL_SCI) += csctapi/ifd_sci.c
+SRC-$(CONFIG_CARDREADER_SMARGO) += csctapi/ifd_smargo.c
+SRC-$(CONFIG_CARDREADER_SMART) += csctapi/ifd_smartreader.c
+SRC-$(CONFIG_CARDREADER_STINGER) += csctapi/ifd_stinger.c
+SRC-$(CONFIG_CARDREADER_STAPI) += csctapi/ifd_stapi.c
+SRC-$(CONFIG_CARDREADER_STAPI5) += csctapi/ifd_stapi.c
+
+SRC-$(CONFIG_LIB_MINILZO) += minilzo/minilzo.c
+
+SRC-$(CONFIG_CS_ANTICASC) += module-anticasc.c
+SRC-$(CONFIG_CS_CACHEEX) += module-cacheex.c
+SRC-$(CONFIG_MODULE_CAMD33) += module-camd33.c
+SRC-$(CONFIG_CS_CACHEEX) += module-camd35-cacheex.c
+SRC-$(sort $(CONFIG_MODULE_CAMD35) $(CONFIG_MODULE_CAMD35_TCP)) += module-camd35.c
+SRC-$(CONFIG_CS_CACHEEX) += module-cccam-cacheex.c
+SRC-$(CONFIG_MODULE_CCCAM) += module-cccam.c
+SRC-$(CONFIG_MODULE_CCCSHARE) += module-cccshare.c
+SRC-$(CONFIG_MODULE_CONSTCW) += module-constcw.c
+SRC-$(CONFIG_CS_CACHEEX) += module-csp.c
+SRC-$(CONFIG_CW_CYCLE_CHECK) += module-cw-cycle-check.c
+SRC-$(CONFIG_WITH_AZBOX) += module-dvbapi-azbox.c
+SRC-$(CONFIG_WITH_MCA) += module-dvbapi-mca.c
+### SRC-$(CONFIG_WITH_COOLAPI) += module-dvbapi-coolapi.c 
+### experimental reversed API
+SRC-$(CONFIG_WITH_COOLAPI) += module-dvbapi-coolapi-legacy.c
+SRC-$(CONFIG_WITH_COOLAPI2) += module-dvbapi-coolapi.c
+SRC-$(CONFIG_WITH_SU980) += module-dvbapi-coolapi.c
+SRC-$(CONFIG_WITH_STAPI) += module-dvbapi-stapi.c
+SRC-$(CONFIG_WITH_STAPI5) += module-dvbapi-stapi5.c
+SRC-$(CONFIG_HAVE_DVBAPI) += module-dvbapi-chancache.c
+SRC-$(CONFIG_HAVE_DVBAPI) += module-dvbapi.c
+SRC-$(CONFIG_MODULE_GBOX) += module-gbox-helper.c
+SRC-$(CONFIG_MODULE_GBOX) += module-gbox-sms.c
+SRC-$(CONFIG_MODULE_GBOX) += module-gbox-remm.c
+SRC-$(CONFIG_MODULE_GBOX) += module-gbox-cards.c
+SRC-$(CONFIG_MODULE_GBOX) += module-gbox.c
+SRC-$(CONFIG_IRDETO_GUESSING) += module-ird-guess.c
+SRC-$(CONFIG_LCDSUPPORT) += module-lcd.c
+SRC-$(CONFIG_LEDSUPPORT) += module-led.c
+SRC-$(CONFIG_MODULE_MONITOR) += module-monitor.c
+SRC-$(CONFIG_MODULE_NEWCAMD) += module-newcamd.c
+SRC-$(CONFIG_MODULE_NEWCAMD) += module-newcamd-des.c
+SRC-$(CONFIG_MODULE_PANDORA) += module-pandora.c
+SRC-$(CONFIG_MODULE_GHTTP) += module-ghttp.c
+SRC-$(CONFIG_MODULE_RADEGAST) += module-radegast.c
+SRC-$(CONFIG_MODULE_SCAM) += module-scam.c
+SRC-$(CONFIG_MODULE_SERIAL) += module-serial.c
+SRC-$(CONFIG_WITH_LB) += module-stat.c
+SRC-$(CONFIG_WEBIF) += module-webif-lib.c
+SRC-$(CONFIG_WEBIF) += module-webif-tpl.c
+SRC-$(CONFIG_WEBIF) += module-webif.c
+SRC-$(CONFIG_WEBIF) += webif/pages.c
+SRC-$(CONFIG_WITH_CARDREADER) += reader-common.c
+SRC-$(CONFIG_READER_BULCRYPT) += reader-bulcrypt.c
+SRC-$(CONFIG_READER_CONAX) += reader-conax.c
+SRC-$(CONFIG_READER_CRYPTOWORKS) += reader-cryptoworks.c
+SRC-$(CONFIG_READER_DGCRYPT) += reader-dgcrypt.c
+SRC-$(CONFIG_READER_DRE) += reader-dre.c
+SRC-$(CONFIG_READER_DRE) += reader-dre-cas.c
+SRC-$(CONFIG_READER_DRE) += reader-dre-common.c
+SRC-$(CONFIG_READER_DRE) += reader-dre-st20.c
+SRC-$(CONFIG_READER_GRIFFIN) += reader-griffin.c
+SRC-$(CONFIG_READER_IRDETO) += reader-irdeto.c
+SRC-$(CONFIG_READER_NAGRA_COMMON) += reader-nagra-common.c
+SRC-$(CONFIG_READER_NAGRA) += reader-nagra.c
+SRC-$(CONFIG_READER_NAGRA_MERLIN) += reader-nagracak7.c
+SRC-$(CONFIG_READER_SECA) += reader-seca.c
+SRC-$(CONFIG_READER_TONGFANG) += reader-tongfang.c
+SRC-$(CONFIG_READER_VIACCESS) += reader-viaccess.c
+SRC-$(CONFIG_READER_VIDEOGUARD) += reader-videoguard-common.c
+SRC-$(CONFIG_READER_VIDEOGUARD) += reader-videoguard1.c
+SRC-$(CONFIG_READER_VIDEOGUARD) += reader-videoguard12.c
+SRC-$(CONFIG_READER_VIDEOGUARD) += reader-videoguard2.c
+SRC-y += oscam-aes.c
+SRC-y += oscam-array.c
+SRC-y += oscam-hashtable.c
+SRC-y += oscam-cache.c
+SRC-y += oscam-chk.c
+SRC-y += oscam-client.c
+SRC-y += oscam-conf.c
+SRC-y += oscam-conf-chk.c
+SRC-y += oscam-conf-mk.c
+SRC-y += oscam-config-account.c
+SRC-y += oscam-config-global.c
+SRC-y += oscam-config-reader.c
+SRC-y += oscam-config.c
+SRC-y += oscam-ecm.c
+SRC-y += oscam-emm.c
+SRC-y += oscam-emm-cache.c
+SRC-y += oscam-failban.c
+SRC-y += oscam-files.c
+SRC-y += oscam-garbage.c
+SRC-y += oscam-lock.c
+SRC-y += oscam-log.c
+SRC-y += oscam-log-reader.c
+SRC-y += oscam-net.c
+SRC-y += oscam-llist.c
+SRC-y += oscam-reader.c
+SRC-y += oscam-simples.c
+SRC-y += oscam-string.c
+SRC-y += oscam-time.c
+SRC-y += oscam-work.c
+SRC-y += oscam.c
+# config.c is automatically generated by config.sh in OBJDIR
+SRC-y += config.c
+ifdef BUILD_TESTS
+	SRC-y += tests.c
+	override STD_DEFS += -DBUILD_TESTS=1
+endif
+
+SRC := $(SRC-y)
+OBJ := $(addprefix $(OBJDIR)/,$(subst .c,.o,$(SRC)))
+SRC := $(subst config.c,$(OBJDIR)/config.c,$(SRC))
+
+# The default build target rebuilds the config.mak if needed and then
+# starts the compilation.
+all:
+	@./config.sh --use-flags "$(USE_FLAGS)" --objdir "$(OBJDIR)" --make-config.mak
+	@-mkdir -p $(OBJDIR)/cscrypt $(OBJDIR)/csctapi $(OBJDIR)/minilzo $(OBJDIR)/webif
+	@-printf "\
++-------------------------------------------------------------------------------\n\
+| OSCam ver: $(VER) rev: $(SVN_REV) target: $(TARGET)\n\
+| Tools:\n\
+|  CROSS    = $(CROSS_DIR)$(CROSS)\n\
+|  CC       = $(CC)\n\
+| Settings:\n\
+|  CONF_DIR = $(CONF_DIR)\n\
+|  CC_OPTS  = $(strip $(CC_OPTS))\n\
+|  CC_WARN  = $(strip $(CC_WARN))\n\
+|  CFLAGS   = $(strip $(CFLAGS))\n\
+|  LDFLAGS  = $(strip $(LDFLAGS))\n\
+|  LIBS     = $(strip $(LIBS))\n\
+|  UseFlags = $(addsuffix =1,$(USE_FLAGS))\n\
+| Config:\n\
+|  Addons   : $(shell ./config.sh --use-flags "$(USE_FLAGS)" --show-enabled addons)\n\
+|  Protocols: $(shell ./config.sh --use-flags "$(USE_FLAGS)" --show-enabled protocols | sed -e 's|MODULE_||g')\n\
+|  Readers  : $(shell ./config.sh --use-flags "$(USE_FLAGS)" --show-enabled readers | sed -e 's|READER_||g')\n\
+|  CardRdrs : $(shell ./config.sh --use-flags "$(USE_FLAGS)" --show-enabled card_readers | sed -e 's|CARDREADER_||g')\n\
+|  Compiler : $(shell $(CC) --version 2>/dev/null | head -n 1)\n\
+|  Config   : $(OBJDIR)/config.mak\n\
+|  Binary   : $(OSCAM_BIN)\n\
++-------------------------------------------------------------------------------\n"
+ifeq "$(shell ./config.sh --enabled WEBIF)" "Y"
+	@$(MAKE) --no-print-directory --quiet -C webif
+endif
+	@$(MAKE) --no-print-directory $(OSCAM_BIN) $(LIST_SMARGO_BIN)
+
+$(OSCAM_BIN).debug: $(OBJ)
+	$(SAY) "LINK	$@"
+	$(Q)$(CC) $(LDFLAGS) $(OBJ) $(LIBS) -o $@
+
+$(OSCAM_BIN): $(OSCAM_BIN).debug
+	$(SAY) "STRIP	$@"
+	$(Q)cp $(OSCAM_BIN).debug $(OSCAM_BIN)
+	$(Q)$(STRIP) $(OSCAM_BIN)
+
+$(LIST_SMARGO_BIN): utils/list_smargo.c
+	$(SAY) "BUILD	$@"
+	$(Q)$(CC) $(STD_DEFS) $(CC_OPTS) $(CC_WARN) $(CFLAGS) $(LDFLAGS) utils/list_smargo.c $(LIBS) -o $@
+
+$(OBJDIR)/config.o: $(OBJDIR)/config.c
+	$(SAY) "CONF	$<"
+	$(Q)$(CC) $(STD_DEFS) $(CC_OPTS) $(CC_WARN) $(CFLAGS) -c $< -o $@
+
+$(OBJDIR)/%.o: %.c Makefile
+	@$(CC) -MP -MM -MT $@ -o $(subst .o,.d,$@) $<
+	$(SAY) "CC	$<"
+	$(Q)$(CC) $(STD_DEFS) $(CC_OPTS) $(CC_WARN) $(CFLAGS) -c $< -o $@
+
+-include $(subst .o,.d,$(OBJ))
+
+tests:
+	@-$(MAKE) --no-print-directory BUILD_TESTS=1 OSCAM_BIN=$(TESTS_BIN)
+	@-touch oscam.c
+# The above is really hideous hack :-) If we don't force oscam.c recompilation
+# after we've build the tests binary, the next "normal" compilation would fail
+# because there would be no run_tests() function. So the touch is there to
+# ensure oscam.c would be recompiled.
+
+config:
+	$(SHELL) ./config.sh --gui
+
+menuconfig: config
+
+allyesconfig:
+	@echo "Enabling all config options."
+	@-$(SHELL) ./config.sh --enable all
+
+allnoconfig:
+	@echo "Disabling all config options."
+	@-$(SHELL) ./config.sh --disable all
+
+defconfig:
+	@echo "Restoring default config."
+	@-$(SHELL) ./config.sh --restore
+
+clean:
+	@-for FILE in $(BUILD_DIR)/* $(TESTS_BIN) $(TESTS_BIN).debug; do \
+		echo "RM	$$FILE"; \
+		rm -rf $$FILE; \
+	done
+	@-rm -rf $(BUILD_DIR) lib
+
+distclean: clean
+	@-for FILE in $(BINDIR)/list_smargo-* $(BINDIR)/oscam-$(VER)*; do \
+		echo "RM	$$FILE"; \
+		rm -rf $$FILE; \
+	done
+	@-$(MAKE) --no-print-directory --quiet -C webif clean
+
+README.build:
+	@echo "Extracting 'make help' into $@ file."
+	@-printf "\
+** This file is generated from 'make help' output, do not edit it. **\n\
+\n\
+" > $@
+	@-$(MAKE) --no-print-directory help >> $@
+	@echo "Done."
+
+README.config:
+	@echo "Extracting 'config.sh --help' into $@ file."
+	@-printf "\
+** This file is generated from 'config.sh --help' output, do not edit it. **\n\
+\n\
+" > $@
+	@-./config.sh --help >> $@
+	@echo "Done."
+
+help:
+	@-printf "\
+OSCam build system documentation\n\
+================================\n\
+\n\
+ Build variables:\n\
+   The build variables are set on the make command line and control the build\n\
+   process. Setting the variables lets you enable additional features, request\n\
+   extra libraries and more. Currently recognized build variables are:\n\
+\n\
+   CROSS=prefix   - Set tools prefix. This variable is used when OScam is being\n\
+                    cross compiled. For example if you want to cross compile\n\
+                    for SH4 architecture you can run: 'make CROSS=sh4-linux-'\n\
+                    If you don't have the directory where cross compilers are\n\
+                    in your PATH you can run:\n\
+                    'make CROSS=/opt/STM/STLinux-2.3/devkit/sh4/bin/sh4-linux-'\n\
+\n\
+   CROSS_DIR=dir  - Set tools directory. This variable is added in front of\n\
+                    CROSS variable. CROSS_DIR is useful if you want to use\n\
+                    predefined targets that are setting CROSS, but you don't have\n\
+                    the cross compilers in your PATH. For example:\n\
+                    'make sh4 CROSS_DIR=/opt/STM/STLinux-2.3/devkit/sh4/bin/'\n\
+                    'make dm500 CROSS_DIR=/opt/cross/dm500/cdk/bin/'\n\
+\n\
+   CONF_DIR=/dir  - Set OSCam config directory. For example to change config\n\
+                    directory to /etc run: 'make CONF_DIR=/etc'\n\
+                    The default config directory is: '$(CONF_DIR)'\n\
+\n\
+   CC_OPTS=text   - This variable holds compiler optimization parameters.\n\
+                    Default CC_OPTS value is:\n\
+                    '$(CC_OPTS)'\n\
+                    To add text to this variable set EXTRA_CC_OPTS=text.\n\
+\n\
+   CC_WARN=text   - This variable holds compiler warning parameters.\n\
+                    Default CC_WARN value is:\n\
+                    '$(CC_WARN)'\n\
+                    To add text to this variable set EXTRA_CC_WARN=text.\n\
+\n\
+   V=1            - Request build process to print verbose messages. By\n\
+                    default the only messages that are shown are simple info\n\
+                    what is being compiled. To request verbose build run:\n\
+                    'make V=1'\n\
+\n\
+ Extra build variables:\n\
+   These variables add text to build variables. They are useful if you want\n\
+   to add additional options to already set variables without overwriting them\n\
+   Currently defined EXTRA_xxx variables are:\n\
+\n\
+   EXTRA_CC_OPTS  - Add text to CC_OPTS.\n\
+                    Example: 'make EXTRA_CC_OPTS=-Os'\n\
+\n\
+   EXTRA_CC_WARN  - Add text to CC_WARN.\n\
+                    Example: 'make EXTRA_CC_WARN=-Wshadow'\n\
+\n\
+   EXTRA_TARGET   - Add text to TARGET.\n\
+                    Example: 'make EXTRA_TARGET=-private'\n\
+\n\
+   EXTRA_CFLAGS   - Add text to CFLAGS (affects compilation).\n\
+                    Example: 'make EXTRA_CFLAGS=\"-DBLAH=1 -I/opt/local\"'\n\
+\n\
+   EXTRA_LDFLAGS  - Add text to LDFLAGS (affects linking).\n\
+                    Example: 'make EXTRA_LDFLAGS=-Llibdir'\n\
+\n\
+   EXTRA_FLAGS    - Add text to both EXTRA_CFLAGS and EXTRA_LDFLAGS.\n\
+                    Example: 'make EXTRA_FLAGS=-DBLAH=1'\n\
+\n\
+   EXTRA_LIBS     - Add text to LIBS (affects linking).\n\
+                    Example: 'make EXTRA_LIBS=\"-L./stapi -loscam_stapi\"'\n\
+\n\
+ Use flags:\n\
+   Use flags are used to request additional libraries or features to be used\n\
+   by OSCam. Currently defined USE_xxx flags are:\n\
+\n\
+   USE_LIBUSB=1    - Request linking with libusb. The variables that control\n\
+                     USE_LIBUSB=1 build are:\n\
+                         LIBUSB_FLAGS='$(DEFAULT_LIBUSB_FLAGS)'\n\
+                         LIBUSB_CFLAGS='$(DEFAULT_LIBUSB_FLAGS)'\n\
+                         LIBUSB_LDFLAGS='$(DEFAULT_LIBUSB_FLAGS)'\n\
+                         LIBUSB_LIB='$(DEFAULT_LIBUSB_LIB)'\n\
+                     Using USE_LIBUSB=1 adds to '-libusb' to PLUS_TARGET.\n\
+                     To build with static libusb, set the variable LIBUSB_LIB\n\
+                     to contain full path of libusb library. For example:\n\
+                      make USE_LIBUSB=1 LIBUSB_LIB=/usr/lib/libusb-1.0.a\n\
+\n\
+   USE_PCSC=1      - Request linking with PCSC. The variables that control\n\
+                     USE_PCSC=1 build are:\n\
+                         PCSC_FLAGS='$(DEFAULT_PCSC_FLAGS)'\n\
+                         PCSC_CFLAGS='$(DEFAULT_PCSC_FLAGS)'\n\
+                         PCSC_LDFLAGS='$(DEFAULT_PCSC_FLAGS)'\n\
+                         PCSC_LIB='$(DEFAULT_PCSC_LIB)'\n\
+                     Using USE_PCSC=1 adds to '-pcsc' to PLUS_TARGET.\n\
+                     To build with static PCSC, set the variable PCSC_LIB\n\
+                     to contain full path of PCSC library. For example:\n\
+                      make USE_PCSC=1 PCSC_LIB=/usr/local/lib/libpcsclite.a\n\
+\n\
+   USE_STAPI=1    - Request linking with STAPI. The variables that control\n\
+                     USE_STAPI=1 build are:\n\
+                         STAPI_FLAGS='$(DEFAULT_STAPI_FLAGS)'\n\
+                         STAPI_CFLAGS='$(DEFAULT_STAPI_FLAGS)'\n\
+                         STAPI_LDFLAGS='$(DEFAULT_STAPI_FLAGS)'\n\
+                         STAPI_LIB='$(DEFAULT_STAPI_LIB)'\n\
+                     Using USE_STAPI=1 adds to '-stapi' to PLUS_TARGET.\n\
+                     In order for USE_STAPI to work you have to create stapi\n\
+                     directory and put liboscam_stapi.a file in it.\n\
+\n\
+   USE_STAPI5=1    - Request linking with STAPI5. The variables that control\n\
+                     USE_STAPI5=1 build are:\n\
+                         STAPI5_FLAGS='$(DEFAULT_STAPI5_FLAGS)'\n\
+                         STAPI5_CFLAGS='$(DEFAULT_STAPI5_FLAGS)'\n\
+                         STAPI5_LDFLAGS='$(DEFAULT_STAPI5_FLAGS)'\n\
+                         STAPI5_LIB='$(DEFAULT_STAPI5_LIB)'\n\
+                     Using USE_STAPI5=1 adds to '-stapi' to PLUS_TARGET.\n\
+                     In order for USE_STAPI5 to work you have to create stapi\n\
+                     directory and put liboscam_stapi5.a file in it.\n\
+\n\
+   USE_COOLAPI=1  - Request support for Coolstream API (libnxp) aka NeutrinoHD\n\
+                    box. The variables that control the build are:\n\
+                         COOLAPI_FLAGS='$(DEFAULT_COOLAPI_FLAGS)'\n\
+                         COOLAPI_CFLAGS='$(DEFAULT_COOLAPI_FLAGS)'\n\
+                         COOLAPI_LDFLAGS='$(DEFAULT_COOLAPI_FLAGS)'\n\
+                         COOLAPI_LIB='$(DEFAULT_COOLAPI_LIB)'\n\
+                     Using USE_COOLAPI=1 adds to '-coolapi' to PLUS_TARGET.\n\
+                     In order for USE_COOLAPI to work you have to have libnxp.so\n\
+                     library in your cross compilation toolchain.\n\
+\n\
+   USE_COOLAPI2=1  - Request support for Coolstream API aka NeutrinoHD\n\
+                    box. The variables that control the build are:\n\
+                         COOLAPI_FLAGS='$(DEFAULT_COOLAPI2_FLAGS)'\n\
+                         COOLAPI_CFLAGS='$(DEFAULT_COOLAPI2_FLAGS)'\n\
+                         COOLAPI_LDFLAGS='$(DEFAULT_COOLAPI2_FLAGS)'\n\
+                         COOLAPI_LIB='$(DEFAULT_COOLAPI2_LIB)'\n\
+                     Using USE_COOLAPI2=1 adds to '-coolapi2' to PLUS_TARGET.\n\
+                     In order for USE_COOLAPI2 to work you have to have liblnxUKAL.so,\n\
+                     liblnxcssUsr.so, liblnxscsUsr.so, liblnxnotifyqUsr.so, liblnxplatUsr.so\n\
+                     library in your cross compilation toolchain.\n\
+\n\
+   USE_SU980=1  - Request support for SU980 API (libentropic) aka Enimga2 arm\n\
+                    box. The variables that control the build are:\n\
+                         COOLAPI_FLAGS='$(DEFAULT_SU980_FLAGS)'\n\
+                         COOLAPI_CFLAGS='$(DEFAULT_SU980_FLAGS)'\n\
+                         COOLAPI_LDFLAGS='$(DEFAULT_SU980_FLAGS)'\n\
+                         COOLAPI_LIB='$(DEFAULT_SU980_LIB)'\n\
+                     Using USE_SU980=1 adds to '-su980' to PLUS_TARGET.\n\
+                     In order for USE_SU980 to work you have to have libentropic.a\n\
+                     library in your cross compilation toolchain.\n\
+\n\
+   USE_AZBOX=1    - Request support for AZBOX (openxcas)\n\
+                    box. The variables that control the build are:\n\
+                         AZBOX_FLAGS='$(DEFAULT_AZBOX_FLAGS)'\n\
+                         AZBOX_CFLAGS='$(DEFAULT_AZBOX_FLAGS)'\n\
+                         AZBOX_LDFLAGS='$(DEFAULT_AZBOX_FLAGS)'\n\
+                         AZBOX_LIB='$(DEFAULT_AZBOX_LIB)'\n\
+                     Using USE_AZBOX=1 adds to '-azbox' to PLUS_TARGET.\n\
+                     extapi/openxcas/libOpenXCASAPI.a library that is shipped\n\
+                     with OSCam is compiled for MIPSEL.\n\
+\n\
+   USE_MCA=1      - Request support for Matrix Cam Air (MCA).\n\
+                    The variables that control the build are:\n\
+                         MCA_FLAGS='$(DEFAULT_MCA_FLAGS)'\n\
+                         MCA_CFLAGS='$(DEFAULT_MCA_FLAGS)'\n\
+                         MCA_LDFLAGS='$(DEFAULT_MCA_FLAGS)'\n\
+                     Using USE_MCA=1 adds to '-mca' to PLUS_TARGET.\n\
+\n\
+   USE_LIBCRYPTO=1 - Request linking with libcrypto instead of using OSCam\n\
+                     internal crypto functions. USE_LIBCRYPTO is automatically\n\
+                     enabled if the build is configured with SSL support. The\n\
+                     variables that control USE_LIBCRYPTO=1 build are:\n\
+                         LIBCRYPTO_FLAGS='$(DEFAULT_LIBCRYPTO_FLAGS)'\n\
+                         LIBCRYPTO_CFLAGS='$(DEFAULT_LIBCRYPTO_FLAGS)'\n\
+                         LIBCRYPTO_LDFLAGS='$(DEFAULT_LIBCRYPTO_FLAGS)'\n\
+                         LIBCRYPTO_LIB='$(DEFAULT_LIBCRYPTO_LIB)'\n\
+\n\
+   USE_SSL=1       - Request linking with libssl. USE_SSL is automatically\n\
+                     enabled if the build is configured with SSL support. The\n\
+                     variables that control USE_SSL=1 build are:\n\
+                         SSL_FLAGS='$(DEFAULT_SSL_FLAGS)'\n\
+                         SSL_CFLAGS='$(DEFAULT_SSL_FLAGS)'\n\
+                         SSL_LDFLAGS='$(DEFAULT_SSL_FLAGS)'\n\
+                         SSL_LIB='$(DEFAULT_SSL_LIB)'\n\
+                     Using USE_SSL=1 adds to '-ssl' to PLUS_TARGET.\n\
+\n\
+   USE_UTF8=1       - Request UTF-8 enabled webif by default.\n\
+\n\
+ Automatically intialized variables:\n\
+\n\
+   TARGET=text     - This variable is auto detected by using the compiler's\n\
+                    -dumpmachine output. To see the target on your machine run:\n\
+                     'gcc -dumpmachine'\n\
+\n\
+   PLUS_TARGET     - This variable is added to TARGET and it is set depending\n\
+                     on the chosen USE_xxx flags. To disable adding\n\
+                     PLUS_TARGET to TARGET, set NO_PLUS_TARGET=1\n\
+\n\
+   BINDIR          - The directory where final oscam binary would be put. The\n\
+                     default is: $(BINDIR)\n\
+\n\
+   OSCAM_BIN=text  - This variable controls how the oscam binary will be named.\n\
+                     Default OSCAM_BIN value is:\n\
+                      'BINDIR/oscam-VERSVN_REV-TARGET'\n\
+                     Once the variables (BINDIR, VER, SVN_REV and TARGET) are\n\
+                     replaced, the resulting filename can look like this:\n\
+                      'Distribution/oscam-1.20-unstable_svn7404-i486-slackware-linux-static'\n\
+                     For example you can run: 'make OSCAM_BIN=my-oscam'\n\
+\n\
+ Binaries compiled and run during the OSCam build:\n\
+\n\
+   OSCam builds webif/pages_gen binary that is run by the build system to\n\
+   generate file that holds web pages. To build this binary two variables\n\
+   are used:\n\
+\n\
+   HOSTCC=gcc     - The compiler used for building binaries that are run on\n\
+                    the build machine (the host). Default: gcc\n\
+                    To use clang for example run: make CC=clang HOSTCC=clang\n\
+\n\
+   HOSTCFLAGS=xxx - The CFLAGS passed to HOSTCC. See webif/Makefile for the\n\
+                    default host cflags.\n\
+\n\
+ Config targets:\n\
+   make config        - Start configuration utility.\n\
+   make allyesconfig  - Enable all configuration options.\n\
+   make allnoconfig   - Disable all configuration options.\n\
+   make defconfig     - Restore default configuration options.\n\
+\n\
+ Cleaning targets:\n\
+   make clean     - Remove '$(BUILD_DIR)' directory which contains compiled\n\
+                    object files.\n\
+   make distclean - Executes clean target and also removes binary files\n\
+                    located in '$(BINDIR)' directory.\n\
+\n\
+ Build system files:\n\
+   config.sh      - OSCam configuration. Run 'config.sh --help' to see\n\
+                    available parameters or 'make config' to start GUI\n\
+                    configuratior.\n\
+   Makefile       - Main build system file.\n\
+   Makefile.extra - Contains predefined targets. You can use this file\n\
+                    as example on how to use the build system.\n\
+   Makefile.local - This file is included in Makefile and allows creation\n\
+                    of local build system targets. See Makefile.extra for\n\
+                    examples.\n\
+\n\
+ Here are some of the interesting predefined targets in Makefile.extra.\n\
+ To use them run 'make target ...' where ... can be any extra flag. For\n\
+ example if you want to compile OSCam for Dreambox (DM500) but do not\n\
+ have the compilers in the path, you can run:\n\
+    make dm500 CROSS_DIR=/opt/cross/dm500/cdk/bin/\n\
+\n\
+ Predefined targets in Makefile.extra:\n\
+\n\
+    make libusb        - Builds OSCam with libusb support\n\
+    make pcsc          - Builds OSCam with PCSC support\n\
+    make pcsc-libusb   - Builds OSCam with PCSC and libusb support\n\
+    make dm500         - Builds OSCam for Dreambox (DM500)\n\
+    make sh4           - Builds OSCam for SH4 boxes\n\
+    make azbox         - Builds OSCam for AZBox STBs\n\
+    make mca           - Builds OSCam for Matrix Cam Air (MCA)\n\
+    make coolstream    - Builds OSCam for Coolstream HD1\n\
+    make coolstream2   - Builds OSCam for Coolstream HD2\n\
+    make dockstar      - Builds OSCam for Dockstar\n\
+    make qboxhd        - Builds OSCam for QBoxHD STBs\n\
+    make opensolaris   - Builds OSCam for OpenSolaris\n\
+    make uclinux       - Builds OSCam for m68k uClinux\n\
+\n\
+ Predefined targets for static builds:\n\
+    make static        - Builds OSCam statically\n\
+    make static-libusb - Builds OSCam with libusb linked statically\n\
+    make static-libcrypto - Builds OSCam with libcrypto linked statically\n\
+    make static-ssl    - Builds OSCam with SSL support linked statically\n\
+\n\
+ Developer targets:\n\
+    make tests         - Builds '$(TESTS_BIN)' binary\n\
+\n\
+ Examples:\n\
+   Build OSCam for SH4 (the compilers are in the path):\n\
+     make CROSS=sh4-linux-\n\n\
+   Build OSCam for SH4 (the compilers are in not in the path):\n\
+     make sh4 CROSS_DIR=/opt/STM/STLinux-2.3/devkit/sh4/bin/\n\
+     make CROSS_DIR=/opt/STM/STLinux-2.3/devkit/sh4/bin/ CROSS=sh4-linux-\n\
+     make CROSS=/opt/STM/STLinux-2.3/devkit/sh4/bin/sh4-linux-\n\n\
+   Build OSCam for SH4 with STAPI:\n\
+     make CROSS=sh4-linux- USE_STAPI=1\n\n\
+   Build OSCam for SH4 with STAPI and changed configuration directory:\n\
+     make CROSS=sh4-linux- USE_STAPI=1 CONF_DIR=/var/tuxbox/config\n\n\
+   Build OSCam for ARM with COOLAPI (coolstream aka NeutrinoHD):\n\
+     make CROSS=arm-cx2450x-linux-gnueabi- USE_COOLAPI=1\n\n\
+   Build OSCam for ARM with COOLAPI2 (coolstream aka NeutrinoHD):\n\
+     make CROSS=arm-pnx8400-linux-uclibcgnueabi- USE_COOLAPI2=1\n\n\
+   Build OSCam for MIPSEL with AZBOX support:\n\
+     make CROSS=mipsel-linux-uclibc- USE_AZBOX=1\n\n\
+   Build OSCam for ARM with MCA support:\n\
+     make CROSS=arm-none-linux-gnueabi- USE_MCA=1\n\n\
+   Build OSCam with libusb and PCSC:\n\
+     make USE_LIBUSB=1 USE_PCSC=1\n\n\
+   Build OSCam with static libusb:\n\
+     make USE_LIBUSB=1 LIBUSB_LIB=\"/usr/lib/libusb-1.0.a\"\n\n\
+   Build OSCam with static libcrypto:\n\
+     make USE_LIBCRYPTO=1 LIBCRYPTO_LIB=\"/usr/lib/libcrypto.a\"\n\n\
+   Build OSCam with static libssl and libcrypto:\n\
+     make USE_SSL=1 SSL_LIB=\"/usr/lib/libssl.a\" LIBCRYPTO_LIB=\"/usr/lib/libcrypto.a\"\n\n\
+   Build with verbose messages and size optimizations:\n\
+     make V=1 CC_OPTS=-Os\n\n\
+   Build and set oscam file name:\n\
+     make OSCAM_BIN=oscam\n\n\
+   Build and set oscam file name depending on revision:\n\
+     make OSCAM_BIN=oscam-\`./config.sh -r\`\n\n\
+"
+
+simple: all
+default: all
+debug: all
+
+-include Makefile.extra
+-include Makefile.local
diff --git a/support/configs/compiler_option b/support/configs/compiler_option
new file mode 100644
index 0000000..f8c5bfe
--- /dev/null
+++ b/support/configs/compiler_option
@@ -0,0 +1 @@
+-O1
\ No newline at end of file
diff --git a/support/configs/compiler_option.txt b/support/configs/compiler_option.txt
new file mode 100644
index 0000000..11c062f
--- /dev/null
+++ b/support/configs/compiler_option.txt
@@ -0,0 +1,3 @@
+-O0 optimization for time
+-O2 optimization (oscam default)
+-Os optimization for code size
\ No newline at end of file
diff --git a/support/configs/config.sh.master b/support/configs/config.sh.master
new file mode 100644
index 0000000..5c34610
--- /dev/null
+++ b/support/configs/config.sh.master
@@ -0,0 +1,752 @@
+#!/bin/sh
+
+addons="WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH WITH_SSL HAVE_DVBAPI WITH_NEUTRINO READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CW_CYCLE_CHECK LCDSUPPORT LEDSUPPORT CLOCKFIX IPV6SUPPORT"
+protocols="MODULE_CAMD33 MODULE_CAMD35 MODULE_CAMD35_TCP MODULE_NEWCAMD MODULE_CCCAM MODULE_CCCSHARE MODULE_GBOX MODULE_RADEGAST MODULE_SCAM MODULE_SERIAL MODULE_CONSTCW MODULE_PANDORA MODULE_GHTTP"
+readers="READER_NAGRA READER_NAGRA_MERLIN READER_IRDETO READER_CONAX READER_CRYPTOWORKS READER_SECA READER_VIACCESS READER_VIDEOGUARD READER_DRE READER_TONGFANG READER_BULCRYPT READER_GRIFFIN READER_DGCRYPT"
+card_readers="CARDREADER_PHOENIX CARDREADER_INTERNAL CARDREADER_SC8IN1 CARDREADER_MP35 CARDREADER_SMARGO CARDREADER_DB2COM CARDREADER_STAPI CARDREADER_STAPI5 CARDREADER_STINGER CARDREADER_DRECAS"
+
+defconfig="
+CONFIG_WEBIF=y
+CONFIG_WEBIF_LIVELOG=y
+CONFIG_WEBIF_JQUERY=y
+CONFIG_TOUCH=y
+# CONFIG_WITH_SSL=n
+CONFIG_HAVE_DVBAPI=y
+# CONFIG_WITH_NEUTRINO=n
+CONFIG_READ_SDT_CHARSETS=y
+CONFIG_IRDETO_GUESSING=y
+CONFIG_CS_ANTICASC=y
+CONFIG_WITH_DEBUG=y
+CONFIG_MODULE_MONITOR=y
+CONFIG_WITH_LB=y
+CONFIG_CS_CACHEEX=y
+CONFIG_CW_CYCLE_CHECK=y
+# CONFIG_LCDSUPPORT=n
+# CONFIG_LEDSUPPORT=n
+CONFIG_CLOCKFIX=y
+# CONFIG_IPV6SUPPORT=n
+# CONFIG_MODULE_CAMD33=n
+CONFIG_MODULE_CAMD35=y
+CONFIG_MODULE_CAMD35_TCP=y
+CONFIG_MODULE_NEWCAMD=y
+CONFIG_MODULE_CCCAM=y
+CONFIG_MODULE_CCCSHARE=y
+CONFIG_MODULE_GBOX=y
+CONFIG_MODULE_RADEGAST=y
+CONFIG_MODULE_SERIAL=y
+CONFIG_MODULE_CONSTCW=y
+CONFIG_MODULE_PANDORA=y
+CONFIG_MODULE_SCAM=y
+CONFIG_MODULE_GHTTP=y
+CONFIG_WITH_CARDREADER=y
+CONFIG_READER_NAGRA_COMMON=y
+CONFIG_READER_NAGRA=y
+CONFIG_READER_NAGRA_MERLIN=y
+CONFIG_READER_IRDETO=y
+CONFIG_READER_CONAX=y
+CONFIG_READER_CRYPTOWORKS=y
+CONFIG_READER_SECA=y
+CONFIG_READER_VIACCESS=y
+CONFIG_READER_VIDEOGUARD=y
+CONFIG_READER_DRE=y
+CONFIG_READER_TONGFANG=y
+CONFIG_READER_BULCRYPT=y
+CONFIG_READER_GRIFFIN=y
+CONFIG_READER_DGCRYPT=y
+CARDREADER_PHOENIX=y
+CARDREADER_DRECAS=y
+CARDREADER_INTERNAL=y
+CARDREADER_SC8IN1=y
+CARDREADER_MP35=y
+CARDREADER_SMARGO=y
+CARDREADER_DB2COM=y
+CARDREADER_STAPI=y
+# CARDREADER_STAPI5=n
+CARDREADER_STINGER=y
+"
+
+usage() {
+	echo \
+"OSCam config
+Usage: `basename $0` [parameters]
+
+ -g, --gui                 Start interactive configuration
+
+ -s, --show-enabled [param] Show enabled configuration options.
+ -Z, --show-disabled [param] Show disabled configuration options.
+ -S, --show-valid [param]  Show valid configuration options.
+                           Possible params: all, addons, protocols,
+                                            readers, card_readers
+
+ -l, --list-config         List active configuration variables.
+ -e, --enabled [option]    Check if certain option is enabled.
+ -d, --disabled [option]   Check if certain option is disabled.
+
+ -E, --enable [option]     Enable config option.
+ -D, --disable [option]    Disable config option.
+
+    The following [option]s enable or disable multiple settings.
+      all          - Everything.
+      addons       - All addons.
+      protocols    - All protocols.
+      readers      - All readers.
+      card_readers - All card readers.
+
+ -R, --restore             Restore default config.
+
+ -v, --oscam-version       Display OSCam version.
+ -r, --oscam-revision      Display OSCam SVN revision.
+
+ -O, --detect-osx-sdk-version  Find where OS X SDK is located
+
+ -h, --help                Display this help text.
+
+Examples:
+  # Enable WEBIF and SSL
+  ./config.sh --enable WEBIF WITH_SSL
+
+  # Disable WEBIF but enable WITH_SSL
+  ./config.sh --disable WEBIF --enable WITH_SSL
+
+  # Restore defaults and disable WEBIF and READER_NAGRA
+  ./config.sh --restore --disable WEBIF READER_NAGRA
+
+  # Use default config with only one enabled reader
+  ./config.sh --restore --disable readers --enable READER_BULCRYPT
+
+  # Disable everything and enable webif one module and one card reader
+  ./config.sh --disable all --enable WEBIF MODULE_NEWCAMD READER_BULCRYPT
+
+  # Disable all card readers except INTERNAL
+  ./config.sh -D card_readers -E CARDREADER_INTERNAL
+
+Available options:
+       addons: $addons
+    protocols: $protocols
+      readers: $readers
+ card_readers: $card_readers
+"
+}
+
+# Output directory for config.mak set by --objdir parameter
+OBJDIR=.
+
+# Use flags set by --use-flags parameter
+USE_FLAGS=
+
+have_flag() {
+	for FLAG in $USE_FLAGS
+	do
+		[ "$FLAG" = "$1" ] && return 0
+	done
+	return 1
+}
+
+have_all_flags() {
+	for opt ; do
+		have_flag $opt || return 1
+	done
+	return 0
+}
+
+have_any_flags() {
+	for opt ; do
+		have_flag $opt && return 0
+	done
+	return 1
+}
+
+not_have_flag() {
+	for FLAG in $USE_FLAGS
+	do
+		[ "$FLAG" = "$1" ] && return 1
+	done
+	return 0
+}
+
+not_have_all_flags() {
+	for opt ; do
+		not_have_flag $opt || return 1
+	done
+	return 0
+}
+
+not_have_any_flags() {
+	for opt ; do
+		not_have_flag $opt && return 0
+	done
+	return 1
+}
+
+# Config functions
+enabled() {
+	grep "^\#define $1 1$" config.h >/dev/null 2>/dev/null
+	return $?
+}
+
+disabled() {
+	grep "^\#define $1 1$" config.h >/dev/null 2>/dev/null
+	test $? = 0 && return 1
+	return 0
+}
+
+enabled_all() {
+	for opt ; do
+		enabled $opt || return 1
+	done
+	return 0
+}
+
+disabled_all() {
+	for opt ; do
+		disabled $opt || return 1
+	done
+	return 0
+}
+
+enabled_any() {
+	for opt ; do
+		enabled $opt && return 0
+	done
+	return 1
+}
+
+disabled_any() {
+	for opt ; do
+		disabled $opt && return 0
+	done
+	return 1
+}
+
+list_enabled() {
+	for OPT in $@
+	do
+		enabled $OPT && echo $OPT
+	done
+}
+
+list_disabled() {
+	for OPT in $@
+	do
+		disabled $OPT && echo $OPT
+	done
+}
+
+write_enabled() {
+	defined_file="webif/is_defined.txt"
+	pages_c="webif/pages.c"
+	rm -f $defined_file $pages_c 2>/dev/null
+	for OPT in $(get_opts) WITH_CARDREADER
+	do
+		enabled $OPT && printf "%s\n" $OPT >> $defined_file
+	done
+}
+
+valid_opt() {
+	[ "$1" = "WITH_CARDREADER" ] && return 0 # Special case
+	echo $addons $protocols $readers $card_readers | grep -w "$1" >/dev/null
+	return $?
+}
+
+enable_opt() {
+	valid_opt $1 && disabled $1 && {
+		sed -e "s|//#define $1 1$|#define $1 1|g" config.h > config.h.tmp && \
+		mv config.h.tmp config.h
+		echo "Enable $1"
+	}
+}
+
+enable_opts() {
+	for OPT in $@
+	do
+		enable_opt $OPT
+	done
+}
+
+disable_opt() {
+	valid_opt $1 && enabled $1 && {
+		sed -e "s|#define $1 1$|//#define $1 1|g" config.h > config.h.tmp && \
+		mv config.h.tmp config.h
+		echo "Disable $1"
+	}
+}
+
+disable_opts() {
+	for OPT in $@
+	do
+		disable_opt $OPT
+	done
+}
+
+get_opts() {
+	OPTS=""
+	case "$1" in
+	'addons')       OPTS="$addons" ; ;;
+	'protocols')    OPTS="$protocols" ; ;;
+	'readers')      OPTS="$readers" ; ;;
+	'card_readers') OPTS="$card_readers" ; ;;
+	*)              OPTS="$addons $protocols $readers $card_readers" ; ;;
+	esac
+	echo $OPTS
+}
+
+update_deps() {
+	# Calculate dependencies
+	enabled_any $(get_opts readers) $(get_opts card_readers) && enable_opt WITH_CARDREADER >/dev/null
+	disabled_all $(get_opts readers) $(get_opts card_readers) && disable_opt WITH_CARDREADER >/dev/null
+	disabled WEBIF && disable_opt WEBIF_LIVELOG >/dev/null
+	disabled WEBIF && disable_opt WEBIF_JQUERY >/dev/null
+	enabled MODULE_CCCSHARE && enable_opt MODULE_CCCAM >/dev/null
+	enabled_any CARDREADER_DB2COM CARDREADER_MP35 CARDREADER_SC8IN1 CARDREADER_STINGER && enable_opt CARDREADER_PHOENIX >/dev/null
+}
+
+list_config() {
+	update_deps
+	# Handle use flags
+	have_flag USE_STAPI && echo "CONFIG_WITH_STAPI=y" || echo "# CONFIG_WITH_STAPI=n"
+	have_flag USE_STAPI5 && echo "CONFIG_WITH_STAPI5=y" || echo "# CONFIG_WITH_STAPI5=n"
+	have_flag USE_COOLAPI && echo "CONFIG_WITH_COOLAPI=y" || echo "# CONFIG_WITH_COOLAPI=n"
+	have_flag USE_COOLAPI2 && echo "CONFIG_WITH_COOLAPI2=y" || echo "# CONFIG_WITH_COOLAPI2=n"
+	have_flag USE_SU980 && echo "CONFIG_WITH_SU980=y" || echo "# CONFIG_WITH_SU980=n"
+	have_flag USE_AZBOX && echo "CONFIG_WITH_AZBOX=y" || echo "# CONFIG_WITH_AZBOX=n"
+	have_flag USE_MCA && echo "CONFIG_WITH_MCA=y" || echo "# CONFIG_WITH_MCA=n"
+	have_flag USE_LIBCRYPTO && echo "CONFIG_WITH_LIBCRYPTO=y" || echo "# CONFIG_WITH_LIBCRYPTO=n"
+	for OPT in $addons $protocols WITH_CARDREADER $readers
+	do
+		enabled $OPT && echo "CONFIG_$OPT=y" || echo "# CONFIG_$OPT=n"
+	done
+	for OPT in $card_readers
+	do
+		if [ $OPT = CARDREADER_INTERNAL ]
+		then
+			# Internal card reader is actually three different readers depending on USE flags
+			enabled $OPT && have_flag USE_AZBOX && echo "CONFIG_${OPT}_AZBOX=y" || echo "# CONFIG_${OPT}_AZBOX=n"
+			enabled $OPT && have_any_flags USE_COOLAPI USE_SU980 && echo "CONFIG_${OPT}_COOLAPI=y" || echo "# CONFIG_${OPT}_COOLAPI=n"
+			enabled $OPT && have_flag USE_COOLAPI2 && echo "CONFIG_${OPT}_COOLAPI2=y" || echo "# CONFIG_${OPT}_COOLAPI2=n"
+			enabled $OPT && not_have_all_flags USE_AZBOX USE_COOLAPI USE_COOLAPI2 USE_SU980 && echo "CONFIG_${OPT}_SCI=y" || echo "# CONFIG_${OPT}_SCI=n"
+			continue
+		fi
+		if [ $OPT = CARDREADER_STAPI ]
+		then
+			# Enable CARDREADER_STAPI only if USE_STAPI is set
+			enabled $OPT && have_flag USE_STAPI && echo "CONFIG_$OPT=y" || echo "# CONFIG_$OPT=n"
+			continue
+		fi
+		if [ $OPT = CARDREADER_STAPI5 ]
+		then
+			# Enable CARDREADER_STAPI5 only if USE_STAPI5 is set
+			enabled $OPT && have_flag USE_STAPI5 && echo "CONFIG_$OPT=y" || echo "# CONFIG_$OPT=n"
+			continue
+		fi
+		enabled $OPT && echo "CONFIG_$OPT=y" || echo "# CONFIG_$OPT=n"
+	done
+	have_flag USE_LIBUSB && echo "CONFIG_CARDREADER_SMART=y" || echo "# CONFIG_CARDREADER_SMART=n"
+	have_flag USE_PCSC && echo "CONFIG_CARDREADER_PCSC=y" || echo "# CONFIG_CARDREADER_PCSC=n"
+	# Extra modules/libraries
+	enabled_any MODULE_GBOX WEBIF && echo "CONFIG_LIB_MINILZO=y" || echo "# CONFIG_LIB_MINILZO=n"
+	not_have_flag USE_LIBCRYPTO && echo "CONFIG_LIB_AES=y" || echo "# CONFIG_LIB_AES=n"
+	enabled MODULE_CCCAM && echo "CONFIG_LIB_RC6=y" || echo "# CONFIG_LIB_RC6=n"
+	not_have_flag USE_LIBCRYPTO && enabled MODULE_CCCAM && echo "CONFIG_LIB_SHA1=y" || echo "# CONFIG_LIB_SHA1=n"
+	enabled_any READER_DRE MODULE_SCAM READER_VIACCESS READER_NAGRA_MERLIN && echo "CONFIG_LIB_DES=y" || echo "# CONFIG_LIB_DES=n"
+	enabled_any MODULE_CCCAM READER_NAGRA READER_NAGRA_MERLIN READER_SECA && echo "CONFIG_LIB_IDEA=y" || echo "# CONFIG_LIB_IDEA=n"
+	not_have_flag USE_LIBCRYPTO && enabled_any READER_CONAX READER_CRYPTOWORKS READER_NAGRA READER_NAGRA_MERLIN && echo "CONFIG_LIB_BIGNUM=y" || echo "# CONFIG_LIB_BIGNUM=n"
+	enabled READER_NAGRA_MERLIN && echo "CONFIG_LIB_MDC2=y" || echo "# CONFIG_LIB_MDC2=n"
+	enabled READER_NAGRA_MERLIN && echo "CONFIG_LIB_FAST_AES=y" || echo "# CONFIG_LIB_FAST_AES=n"
+	enabled READER_NAGRA_MERLIN && echo "CONFIG_LIB_SHA256=y" || echo "# CONFIG_LIB_SHA256=n"
+	enabled_any READER_NAGRA READER_NAGRA_MERLIN && echo "CONFIG_READER_NAGRA_COMMON=y" || echo "# CONFIG_READER_NAGRA_COMMON=n"
+}
+
+make_config_c() {
+	OPENSSL=$(which openssl 2>/dev/null)
+	if [ "$OPENSSL" = "" ]
+	then
+		echo "// openssl not found!"
+		echo "const char *config_mak = \"CFG: openssl not found in PATH!\";"
+	else
+		echo "// This file is generated by ./config.sh --objdir $OBJDIR --make-config.mak"
+		echo "const char *config_mak ="
+		printf "  \"\\\nCFG: strings FILE | sed -n 's/^CFG~//p' | openssl enc -d -base64 | gzip -d\\\n\"\n"
+		gzip -9 < $OBJDIR/config.mak | $OPENSSL enc -base64 | while read LINE
+		do
+			printf "  \"CFG~%s\\\\n\"\n" "$LINE"
+		done
+		echo "  ;"
+	fi
+}
+
+make_config_mak() {
+	TMPFILE=$(mktemp -t config.mak.XXXXXX) || exit 1
+	list_config > $TMPFILE
+	[ ! -d $OBJDIR ] && mkdir -p $OBJDIR 2>/dev/null
+	cmp $TMPFILE $OBJDIR/config.mak >/dev/null 2>/dev/null
+	if [ $? != 0 ]
+	then
+		cat $TMPFILE  > $OBJDIR/config.mak
+		make_config_c > $OBJDIR/config.c
+	else
+		make_config_c > $TMPFILE
+		cmp $TMPFILE $OBJDIR/config.c >/dev/null 2>/dev/null
+		[ $? != 0 ] && cat $TMPFILE > $OBJDIR/config.c
+	fi
+	rm -rf $TMPFILE
+}
+
+check_test() {
+	if [ "$(cat $tempfileconfig | grep "^#define $1 1$")" != "" ]; then
+		echo "on"
+	else
+		echo "off"
+	fi
+}
+
+disable_all() {
+	for i in $1; do
+		sed -e "s/^#define ${i} 1$/\/\/#define ${i} 1/g" $tempfileconfig > ${tempfileconfig}.tmp && \
+		mv ${tempfileconfig}.tmp $tempfileconfig
+	done
+}
+
+enable_package() {
+	for i in $(cat $tempfile); do
+		strip=$(echo $i | sed "s/\"//g")
+		sed -e "s/\/\/#define ${strip} 1$/#define ${strip} 1/g" $tempfileconfig > ${tempfileconfig}.tmp && \
+		mv ${tempfileconfig}.tmp $tempfileconfig
+	done
+}
+
+print_components() {
+	clear
+	echo "You have selected the following components:"
+	echo
+	echo "Add-ons:"
+	for i in $addons; do
+		printf "\t%-20s: %s\n" $i $(check_test "$i")
+	done
+
+	echo
+	echo "Protocols:"
+	for i in $protocols; do
+		printf "\t%-20s: %s\n" $i $(check_test "$i")
+	done
+
+	echo
+	echo "Readers:"
+	for i in $readers; do
+		printf "\t%-20s: %s\n" $i $(check_test "$i")
+	done
+
+	echo
+	echo "Card readers:"
+	for i in $card_readers; do
+		printf "\t%-20s: %s\n" $i $(check_test "$i")
+	done
+
+	cp -f $tempfileconfig $configfile
+}
+
+menu_addons() {
+	${DIALOG} --checklist "\nChoose add-ons:\n " $height $width $listheight \
+		WEBIF				"Web Interface"							$(check_test "WEBIF") \
+		WEBIF_LIVELOG		"LiveLog"								$(check_test "WEBIF_LIVELOG") \
+		WEBIF_JQUERY		"Jquery onboard (if disabled webload)"	$(check_test "WEBIF_JQUERY") \
+		TOUCH				"Touch Web Interface"					$(check_test "TOUCH") \
+		WITH_SSL			"OpenSSL support"						$(check_test "WITH_SSL") \
+		HAVE_DVBAPI			"DVB API"								$(check_test "HAVE_DVBAPI") \
+		WITH_NEUTRINO		"Neutrino support"						$(check_test "WITH_NEUTRINO") \
+		READ_SDT_CHARSETS	"DVB API read-sdt charsets"				$(check_test "READ_SDT_CHARSETS") \
+		IRDETO_GUESSING		"Irdeto guessing"						$(check_test "IRDETO_GUESSING") \
+		CS_ANTICASC			"Anti cascading"						$(check_test "CS_ANTICASC") \
+		WITH_DEBUG			"Debug messages"						$(check_test "WITH_DEBUG") \
+		MODULE_MONITOR		"Monitor"								$(check_test "MODULE_MONITOR") \
+		WITH_LB				"Loadbalancing"							$(check_test "WITH_LB") \
+		CS_CACHEEX			"Cache exchange"						$(check_test "CS_CACHEEX") \
+		CW_CYCLE_CHECK		"CW Cycle Check"						$(check_test "CW_CYCLE_CHECK") \
+		LCDSUPPORT			"LCD support"							$(check_test "LCDSUPPORT") \
+		LEDSUPPORT			"LED support"							$(check_test "LEDSUPPORT") \
+		CLOCKFIX			"Clockfix (disable on old systems!)"	$(check_test "CLOCKFIX") \
+		IPV6SUPPORT			"IPv6 support (experimental)"			$(check_test "IPV6SUPPORT") \
+		2> ${tempfile}
+
+	opt=${?}
+	if [ $opt != 0 ]; then return; fi
+
+	disable_all "$addons"
+	enable_package
+}
+
+menu_protocols() {
+	${DIALOG} --checklist "\nChoose protocols:\n " $height $width $listheight \
+		MODULE_CAMD33		"camd 3.3"			$(check_test "MODULE_CAMD33") \
+		MODULE_CAMD35		"camd 3.5 UDP"		$(check_test "MODULE_CAMD35") \
+		MODULE_CAMD35_TCP	"camd 3.5 TCP"		$(check_test "MODULE_CAMD35_TCP") \
+		MODULE_NEWCAMD		"newcamd"			$(check_test "MODULE_NEWCAMD") \
+		MODULE_CCCAM		"CCcam"				$(check_test "MODULE_CCCAM") \
+		MODULE_CCCSHARE		"CCcam share"		$(check_test "MODULE_CCCSHARE") \
+		MODULE_GBOX			"gbox"				$(check_test "MODULE_GBOX") \
+		MODULE_RADEGAST		"radegast"			$(check_test "MODULE_RADEGAST") \
+		MODULE_SERIAL		"Serial"			$(check_test "MODULE_SERIAL") \
+		MODULE_CONSTCW		"constant CW"		$(check_test "MODULE_CONSTCW") \
+		MODULE_PANDORA		"Pandora"			$(check_test "MODULE_PANDORA") \
+		MODULE_GHTTP		"Ghttp"				$(check_test "MODULE_GHTTP") \
+		MODULE_SCAM			"scam"				$(check_test "MODULE_SCAM") \
+		2> ${tempfile}
+
+	opt=${?}
+	if [ $opt != 0 ]; then return; fi
+
+	disable_all "$protocols"
+	enable_package
+}
+
+menu_readers() {
+	${DIALOG} --checklist "\nChoose readers (CA systems):\n " $height $width $listheight \
+		READER_NAGRA		"Nagravision"		$(check_test "READER_NAGRA") \
+		READER_NAGRA_MERLIN	"Nagra Merlin"		$(check_test "READER_NAGRA_MERLIN") \
+		READER_IRDETO		"Irdeto"			$(check_test "READER_IRDETO") \
+		READER_CONAX		"Conax"				$(check_test "READER_CONAX") \
+		READER_CRYPTOWORKS	"Cryptoworks"		$(check_test "READER_CRYPTOWORKS") \
+		READER_SECA			"Seca"				$(check_test "READER_SECA") \
+		READER_VIACCESS		"Viaccess"			$(check_test "READER_VIACCESS") \
+		READER_VIDEOGUARD	"NDS Videoguard"	$(check_test "READER_VIDEOGUARD") \
+		READER_DRE			"DRE Crypt"			$(check_test "READER_DRE") \
+		READER_TONGFANG		"Tongfang"			$(check_test "READER_TONGFANG") \
+		READER_BULCRYPT		"Bulcrypt"			$(check_test "READER_BULCRYPT") \
+		READER_GRIFFIN		"Griffin"			$(check_test "READER_GRIFFIN") \
+		READER_DGCRYPT		"DGCrypt"			$(check_test "READER_DGCRYPT") \
+		2> ${tempfile}
+
+	opt=${?}
+	if [ $opt != 0 ]; then return; fi
+
+	disable_all "$readers"
+	enable_package
+}
+
+menu_card_readers() {
+	${DIALOG} --checklist "\nChoose card reader drivers:\n " $height $width $listheight \
+		CARDREADER_PHOENIX	"Phoenix/mouse"					$(check_test "CARDREADER_PHOENIX") \
+		CARDREADER_INTERNAL	"Internal (Sci,Azbox,Cool)"		$(check_test "CARDREADER_INTERNAL") \
+		CARDREADER_SC8IN1	"SC8in1"						$(check_test "CARDREADER_SC8IN1") \
+		CARDREADER_MP35		"AD-Teknik MP 3.6/USB Phoenix"	$(check_test "CARDREADER_MP35") \
+		CARDREADER_SMARGO	"Argolis Smargo Smartreader"	$(check_test "CARDREADER_SMARGO") \
+		CARDREADER_DB2COM	"dbox2"							$(check_test "CARDREADER_DB2COM") \
+		CARDREADER_STAPI	"STAPI"							$(check_test "CARDREADER_STAPI") \
+		CARDREADER_STAPI5	"STAPI5"						$(check_test "CARDREADER_STAPI5") \
+		CARDREADER_STINGER	"STINGER"						$(check_test "CARDREADER_STINGER") \
+		CARDREADER_DRECAS	"DRECAS"						$(check_test "CARDREADER_DRECAS") \
+	2> ${tempfile}
+
+	opt=${?}
+	if [ $opt != 0 ]; then return; fi
+
+	disable_all "$card_readers"
+	enable_package
+}
+
+
+config_dialog() {
+	height=30
+	width=65
+	listheight=16
+
+	DIALOG=${DIALOG:-`which dialog`}
+	if [ -z "${DIALOG}" ]; then
+		echo "Please install dialog package." 1>&2
+		exit 1
+	fi
+
+	configfile=config.h
+	tempfile=$(mktemp -t oscam-config.dialog.XXXXXX) || exit 1
+	tempfileconfig=$(mktemp -t oscam-config.h.XXXXXX) || exit 1
+	trap 'rm -f $tempfile $tempfileconfig $tempfileconfig.bak 2>/dev/null' INT TERM EXIT
+	cp -f $configfile $tempfileconfig
+
+	while true; do
+		${DIALOG} --menu "\nSelect category:\n " $height $width $listheight \
+			Add-ons			"Add-ons" \
+			Protocols		"Network protocols" \
+			Readers			"Readers (CA systems)" \
+			CardReaders		"Card reader drivers" \
+			Save			"Save" \
+			2> ${tempfile}
+
+		opt=${?}
+		if [ $opt != 0 ]; then clear; exit; fi
+
+		menuitem=$(cat $tempfile)
+		case $menuitem in
+			Add-ons) menu_addons ;;
+			Protocols) menu_protocols ;;
+			Readers) menu_readers ;;
+			CardReaders) menu_card_readers ;;
+			Save)
+				print_components
+				update_deps
+				write_enabled
+				exit 0
+			;;
+		esac
+	done
+}
+
+# Change working directory to the directory where the script is
+cd $(dirname $0)
+
+if [ $# = 0 ]
+then
+	usage
+	exit 1
+fi
+
+while [ $# -gt 0 ]
+do
+	case "$1" in
+	'-g'|'--gui'|'--config'|'--menuconfig')
+		config_dialog
+		break
+	;;
+	'-s'|'--show-enabled'|'--show')
+		shift
+		list_enabled $(get_opts $1)
+		# Take special care of USE_xxx flags
+		if [ "$1" = "card_readers" ]
+		then
+			have_flag USE_LIBUSB && echo "CARDREADER_SMART"
+			have_flag USE_PCSC && echo "CARDREADER_PCSC"
+		fi
+		break
+		;;
+	'-Z'|'--show-disabled')
+		shift
+		list_disabled $(get_opts $1)
+		break
+		;;
+	'-S'|'--show-valid')
+		shift
+		for OPT in $(get_opts $1)
+		do
+			echo $OPT
+		done
+		break
+		;;
+	'-E'|'--enable')
+		shift
+		while [ "$1" != "" ]
+		do
+			case "$1" in
+			-*)
+				update_deps
+				continue 2
+				;;
+			all|addons|protocols|readers|card_readers)
+				enable_opts $(get_opts $1)
+				;;
+			*)
+				enable_opt "$1"
+				;;
+			esac
+			shift
+		done
+		update_deps
+		write_enabled
+		;;
+	'-D'|'--disable')
+		shift
+		while [ "$1" != "" ]
+		do
+			case "$1" in
+			-*)
+				update_deps
+				continue 2
+				;;
+			all|addons|protocols|readers|card_readers)
+				disable_opts $(get_opts $1)
+				;;
+			*)
+				disable_opt "$1"
+				;;
+			esac
+			shift
+		done
+		update_deps
+		write_enabled
+		;;
+	'-R'|'--restore')
+		echo $defconfig | sed -e 's|# ||g' | xargs printf "%s\n" | grep "=y$" | sed -e 's|^CONFIG_||g;s|=.*||g' |
+		while read OPT
+		do
+			enable_opt "$OPT"
+		done
+		echo $defconfig | sed -e 's|# ||g' | xargs printf "%s\n" | grep "=n$" | sed -e 's|^CONFIG_||g;s|=.*||g' |
+		while read OPT
+		do
+			disable_opt "$OPT"
+		done
+		update_deps
+		write_enabled
+		;;
+	'-e'|'--enabled')
+		enabled $2 && echo "Y" && exit 0 || echo "N" && exit 1
+		break
+	;;
+	'-d'|'--disabled')
+		disabled $2 && echo "Y" && exit 0 || echo "N" && exit 1
+		break
+	;;
+	'-v'|'--oscam-version')
+		grep CS_VERSION globals.h | cut -d\" -f2
+		break
+	;;
+	'-r'|'--oscam-revision')
+		revision=`(svnversion -n . 2>/dev/null || printf 0) | sed 's/.*://; s/[^0-9]*$//; s/^$/0/'`
+		if [ "$revision" = "0" ]
+		then
+			which git > /dev/null 2>&1 && revision=`git log -10 --pretty=%B | grep git-svn-id | head -n 1 | sed -n -e 's/^.*trunk@\([0-9]*\) .*$/\1/p'`
+		fi
+		echo $revision
+		break
+	;;
+	'-O'|'--detect-osx-sdk-version')
+		shift
+		OSX_VER=${1:-10.10}
+		for DIR in /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX{$OSX_VER,10.10,10.9,10.8,10.7}.sdk /Developer/SDKs/MacOSX{$OSX_VER,10.6,10.5}.sdk
+
+		do
+			if test -d $DIR
+			then
+				echo $DIR
+				exit 0
+			fi
+		done
+		echo Cant_find_OSX_SDK
+		break
+	;;
+	'-l'|'--list-config')
+		list_config
+		exit 0
+	;;
+	'-m'|'--make-config.mak')
+		make_config_mak
+		exit 0
+	;;
+	'--use-flags')
+		shift
+		USE_FLAGS=$1
+	;;
+	'--objdir')
+		shift
+		OBJDIR=$1
+	;;
+	'-h'|'--help')
+		usage
+		break
+	;;
+	*)
+		echo "[WARN] Unknown parameter: $1" >&2
+	;;
+	esac
+	# Some shells complain when there are no more parameters to shift
+	test $# -gt 0 && shift
+done
+
+exit 0
diff --git a/support/configs/max_cpus b/support/configs/max_cpus
new file mode 100644
index 0000000..19c7bdb
--- /dev/null
+++ b/support/configs/max_cpus
@@ -0,0 +1 @@
+16
\ No newline at end of file
diff --git a/support/configs/max_cpus.txt b/support/configs/max_cpus.txt
new file mode 100644
index 0000000..77d5f98
--- /dev/null
+++ b/support/configs/max_cpus.txt
@@ -0,0 +1,5 @@
+put only the count of cpus u want to use in the file !!!
+
+example:
+for 3 of X cpus
+echo 3 >max_cpus
\ No newline at end of file
diff --git a/support/configs/simplebuild.config b/support/configs/simplebuild.config
new file mode 100644
index 0000000..5e6eac0
--- /dev/null
+++ b/support/configs/simplebuild.config
@@ -0,0 +1,8 @@
+DIRECTMENU=0
+NO_SVN_AUTOUPDATE=1
+SAVE_LISTSMARGO=0
+S3_UPDATE_CHECK=0
+USE_VERBOSE=0
+USE_COMPRESS=0
+USE_TARGZ=0
+delete_oscamdebugbinary=1
diff --git a/support/configs/upx.txt b/support/configs/upx.txt
new file mode 100644
index 0000000..230d9f5
--- /dev/null
+++ b/support/configs/upx.txt
@@ -0,0 +1,16 @@
+-1
+-2
+-3
+-4
+-5
+-6
+-7
+-8
+-9
+--best
+--brute
+--ultra-brute
+
+
+-1				#very fast
+--ultra-brute	#very slow but very strong
diff --git a/support/configs/upx_option b/support/configs/upx_option
new file mode 100644
index 0000000..1e898ab
--- /dev/null
+++ b/support/configs/upx_option
@@ -0,0 +1 @@
+upx_c=-1
\ No newline at end of file
diff --git a/support/functions/_ansi b/support/functions/_ansi
new file mode 100644
index 0000000..6a202e4
--- /dev/null
+++ b/support/functions/_ansi
@@ -0,0 +1,39 @@
+#!/bin/bash
+
+#usage:
+#to use colors start with initializeANSI first
+#example red color text
+#echo -e $r_n"red text"$re_"normal text"
+
+initializeANSI(){
+nc='\033[0;';	#nc normal color
+lc='\033[1;';	#lc light  color
+# normal
+r_n=$nc'31m';	#red
+g_n=$nc'32m';	#green
+y_n=$nc'33m';	#yellow
+b_n=$nc'34m';	#blue
+p_n=$nc'35m';	#pink
+c_n=$nc'36m';	#cyan
+w_n=$nc'37m';	#white
+#light
+r_l=$lc'31m';	#red
+g_l=$lc'32m';	#green
+y_l=$lc'33m';	#yellow
+b_l=$lc'34m';	#blue
+p_l=$lc'35m';	#pink
+c_l=$lc'36m';	#cyan
+w_l=$lc'37m';	#white
+#reset to normal
+re_='\033[0m';		#resets all colors
+re_f='\033[39m';	#resets only foreground color
+re_b='\033[49m';	#resets only background color
+#sed replace
+W=$(echo -e '\033[0m');		#normal
+Y=$(echo -e '\033[1;33m');	#yellow
+R=$(echo -e '\033[1;31m');	#red
+G=$(echo -e '\033[1;32m');	#green
+P=$(echo -e '\033[1;35m');	#pink
+C=$(echo -e '\033[1;36m');	#cyan
+WH=$(echo -e '\033[1;37m');	#lightgray
+};
\ No newline at end of file
diff --git a/support/functions/_arrays b/support/functions/_arrays
new file mode 100644
index 0000000..86a2ad0
--- /dev/null
+++ b/support/functions/_arrays
@@ -0,0 +1,54 @@
+#!/bin/bash
+
+_fill_tc_array(){
+	unset AVAI_TCLIST;
+	unset INST_TCLIST;
+	tcempty=0;
+	cd "$tccfgdir";
+	[ "$(ls -A "$tccfgdir")" ] && AVAI_TCLIST=(*) || echo "error fix it";
+	cd "$tcdir";
+	if [ "$(ls -A "$tcdir")" ];then
+		tmp_tclist=(*);
+		for t in "${tmp_tclist[@]}";do
+			for a in "${AVAI_TCLIST[@]}";do
+				[ "$t" == "$a" ] && INST_TCLIST+=($t);
+			done;
+		done;
+	else
+		tcempty=1;
+	fi;
+	if [ "$tcempty" == "1" ];then
+		MISS_TCLIST=$(echo ${AVAI_TCLIST[@]} |sort);
+	else
+		MISS_TCLIST=($(for el in $(diff_array AVAI_TCLIST[@] INST_TCLIST[@]);do echo "$el";done |sort));
+	fi;
+};
+_create_module_arrays(){
+	i=0;
+	for e in $(echo "$addons" | sed 's/WEBIF_//g;s/WITH_//g;s/MODULE_//g;s/CS_//g;s/HAVE_//g;s/_CHARSETS//g;s/CW_CYCLE_CHECK/CWCC/g;s/SUPPORT//g';);do
+		SHORT_ADDONS+=($e);
+		SHORT_MODULENAMES+=($e);
+	done;
+	for e in ${protocols//MODULE_/};do
+		SHORT_PROTOCOLS+=($e);
+		SHORT_MODULENAMES+=($e);
+	done;
+	for e in ${readers//READER_/};do
+		SHORT_READERS+=($e);
+		SHORT_MODULENAMES+=($e);
+	done;
+	for e in ${card_readers//CARDREADER_/};do
+		SHORT_CARD_READERS+=($e);
+		SHORT_MODULENAMES+=($e);
+	done;
+	for e in $addons $protocols $readers $card_readers;do
+		ALL_MODULES_LONG+=($e);
+	done;
+	for e in "${SHORT_MODULENAMES[@]}";do
+		INTERNAL_MODULES["$e"]="${ALL_MODULES_LONG[i]}";
+		((i++));
+	done;
+};
+diff_array(){
+	awk 'BEGIN{RS=ORS=" "}{NR==FNR?a[$0]++:a[$0]--}END{for(k in a)if(a[k])print k}' <(echo -n "${!1}") <(echo -n "${!2}");
+};
\ No newline at end of file
diff --git a/support/functions/_cmd_build b/support/functions/_cmd_build
new file mode 100644
index 0000000..2b31fe6
--- /dev/null
+++ b/support/functions/_cmd_build
@@ -0,0 +1,203 @@
+#!/bin/bash
+
+_cmd_build(){
+	[ ! -d "$svndir" ] || [ -f "$workdir/NEED-CHECKOUT" ] && checkout;
+	if [ "$_toolchainname" == "native" ];then
+		log_name="$(date +%F).$(date +%X).$(hostname).log";
+		
+	else
+		log_name="$(date +%F).$(date +%X).$_toolchainname.log";
+	fi;
+	source "$tccfgdir/$_toolchainname";
+	_reset_config;
+	#_fix_config_h;
+	echo $WH;
+	ologo >"$ldir/$log_name";
+
+#set build defaults
+	CROSS="$tcdir/$_toolchainname/bin/$_compiler";
+	[ -f "$configdir/compiler_option" ] && co=$(cat "$configdir/compiler_option") || co="-O2";
+
+#toolchain defaults
+	for defa in $default_use;do
+		USE_vars[$defa]="$defa=1";
+	done;
+
+#disable by cmd
+	for e in ${USE_vars[*]};do
+		for d in ${USE_vars_disable[*]};do
+			[ "$e" == "$d" ] && USE_vars[${e:0: -2}]=;
+		done;
+	done;
+	_nl;
+	cd "$svndir";
+
+#make clean
+	make distclean > /dev/null 2>&1;
+
+#do enable and disable modules
+	for am in "${all_cc[@]}";do
+		chose="false";
+		if [ "${am:${#am} - 3}" == "_on" ];then
+			e="${am:0: -3}";"$svndir/config.sh" -E "$e" |awk '{printf "\033[1;37m"} {printf " |   %s : ", $1} {printf "\033[1;32m"} {printf "%s\n", $2}';
+		fi;
+		if [ "${am:${#am} - 4}" == "_off" ];then
+			d="${am:0: -4}";"$svndir/config.sh" -D "$d" |awk '{printf "\033[1;37m"} {printf " |  %s : ", $1} {printf "\033[1;31m"} {printf "%s\n", $2}';
+		fi;
+	done;
+
+#fix smargo case
+	if [ "$(./config.sh -e CARDREADER_SMARGO)" == "Y" ] || [ "${USE_vars[$e]}" == "USE_LIBUSB=1" ];then
+		silent=$(./config.sh -E CARDREADER_SMARGO);
+		check_smargo;
+	else
+		silent=$(./config.sh -D CARDREADER_SMARGO);
+		check_smargo;
+	fi;
+
+#fill use variables and set name addons
+	USESTRING=;
+	_usb=;
+	_pcsc=;
+	_stapi=;
+	_stapi5=;
+	_do_patch="0";
+	for e in "${!USE_vars[@]}";do
+		for e1 in $_block;do
+			USE_vars[$e1]=;
+		done;
+		uv=${USE_vars[$e]};
+		if [ ! "$e" == "USE_CONFDIR" ];then
+			USESTRING="$uv $USESTRING";
+			if [ "${#USE_vars[$e]}" -gt "5" ];then
+				echo -e "$w_l |       set : $c_l${USE_vars[$e]}";
+			fi;
+		fi;
+		case "$uv" in
+			"USE_LIBUSB=1")
+					_usb="-libusb";;		# set libusb suffix to name
+			"USE_PCSC=1")
+					_pcsc_on;_pcsc="-pcsc";;# set pcsc suffix to name
+			"USE_PATCH=1")
+					_do_patch="1";;			# enable patching
+			"USE_TARGZ=1")
+					s3cfg_vars[TARGZ]=1;;	# overwrite global
+			"USE_COMPRESS=1")
+					s3cfg_vars[COMPRESS]=1;;# overwrite global
+			"USE_STAPI=1")
+					_stapi="-stapi";
+					STAPI_LIB="STAPI_LIB=$sdir/stapi/liboscam_stapi.a";
+					echo -e "$w_l |      LIB : "$c_l"liboscam_stapi.a"$w_l;;
+			"USE_STAPI5=1")
+					_stapi5="-stapi5";
+					[ "$OPENBOX" == "1" ] && STAPI_LIB="STAPI5_LIB=$sdir/stapi/liboscam_stapi5_OPENBOX.a" && echo -e "$w_l|       LIB : "$c_l"liboscam_stapi5_OPENBOX.a"$w_l;
+					[ "$UFS916003" == "1" ] && STAPI_LIB="STAPI5_LIB=$sdir/stapi/liboscam_stapi5_UFS916_0.03.a" && echo -e "$w_l|       LIB : "$c_l"liboscam_stapi5_UFS916_0.03.a"$w_l;
+					[ "$UFS916003" == "0" ] && [ "$OPENBOX" == "0" ] && STAPI_LIB="STAPI5_LIB=$sdir/stapi/liboscam_stapi5_UFS916.a" && echo -e "$w_l|       LIB : "$c_l"liboscam_stapi5_UFS916.a"$w_l;;
+		esac;
+	done;
+
+#change default oscam CONF_DIR
+if [ ! "$_oscamconfdir_custom" == "not_set" ] && [ ${#_oscamconfdir_custom} -gt 3 ]; then
+	[ ! "$CUSTOM_CONFDIR" == "not_set" ] && _oscamconfdir_custom=$CUSTOM_CONFDIR;
+	CONFDIR="$_oscamconfdir_custom";
+	echo -e $w_l" |      set : "$r_l"custom CONF_DIR=$CONFDIR"$w_l;
+else
+	CONFDIR="$_oscamconfdir_default";
+fi;
+
+#patching
+	if [ "$_do_patch" == "1" ];then
+		if [ -f "$workdir/SVN-IS-PATCHED" ];then
+			quicksvnrestore $_toolchainname;
+			_apply_consolepatch;
+		else
+			_apply_consolepatch;
+		fi;
+	fi;
+
+#echo if build with profile
+	[ ! "$pf" == "empty" ] && echo -e "$y_l | PROFILE  : $pf_name";
+
+#echo IF SVN is Patched
+	[ -f "$workdir/SVN-IS-PATCHED" ] && echo -e $w_l" ISPATCHED : "$P" YES";
+
+#echo max cpu usage
+	if [ -f "$configdir/max_cpus" ];then
+		cpus="$(cat "$configdir/max_cpus")";
+		[ ! "$cpus" -gt "1" ] && cpus="1";
+		[ "$cpus" -gt "$(CPUS)" ] && cpus="$(CPUS)";
+		echo -en "$y_l\n |  MAX_CPUS : $txt_use $cpus $txt_of $(CPUS) CPU(s)";
+	else
+		cpus="$(CPUS)";
+	fi;
+	[ "${s3cfg_vars[USE_VERBOSE]}" == "1" ] && _verbose="V=1";
+
+#killstapi for nonsh4
+	if [ ! "$_toolchainname" == "sh4" ] || [ ! "$_toolchainname" == "sh_4" ];then
+		silent=$("$svndir/config.sh" --disable CARDREADER_STAPI CARDREADER_STAPI5);
+	fi;
+
+#build
+	timer_start;
+	_generate_oscam_name "$_toolchainname";
+	_nl;
+	USESTRING=${USE_vars[@]};
+	make -j"$cpus" $_verbose \
+	"CONF_DIR=$CONFDIR" \
+	"OSCAM_BIN=$bdir/$oscam_name" \
+	"CC_OPTS=$co $cc_opts" \
+	"CC_WARN=$cc_warn" \
+	"CROSS=$CROSS" $STAPI_LIB $USESTRING 2>&1 \
+	|tee -a "$ldir/$log_name" \
+	|grep --line-buffered -v 'BFD' \
+	|grep --line-buffered '^CC\|^GEN\|UseFlags\|  CONF_DIR =\|Binary\|LINK\|STRIP\|BUILD\|Addons\|Protocols\|Readers\|CardRdrs\|^/' \
+	|sed -e "s/^|/"$Y" |/g;s/^LINK/"$P" LINK ------->$W/g;s/^STRIP/"$P" STRIP ------>$W/g;s/^CC\|^BUILD/"$G" BUILD ------>$W/g;s/^GEN/"$C" GEN -------->/g;
+	s/WEBIF_//g;s/WITH_//g;s/MODULE_//g;s/CS_//g;s/HAVE_//g;s/_CHARSETS//g;s/CW_CYCLE_CHECK/CWCC/g;s/SUPPORT//g;"
+
+#calc buildtime
+	timer_stop;
+	timer_calc;
+	bt="[ $txt_buildtime $((Tcalc / 60)) min(s) $((Tcalc % 60)) secs ]";
+
+#save list_smargo
+	cd "$svndir/Distribution";
+	lsmn="$(ls list_smargo* 2> /dev/null)";
+	if [ "${s3cfg_vars[SAVE_LISTSMARGO]}" == "1" ] && [ -f "$svndir/Distribution/$lsmn" ];then
+		if [ "$_toolchainname" == "native" ];then
+			echo -e "$g_n"" SAVE -------> $w_l$lsmn$g_l $txt_as$y_l oscam-svn$(REVISION)-$(hostname)-list_smargo";
+			mv -f "$lsmn" "$bdir/oscam-svn$(REVISION)-$(hostname)-list_smargo";
+			tartmp="oscam-svn$(REVISION)-$(hostname)-list_smargo";
+		else
+			echo -e "$g_n"" SAVE -------> $w_l$lsmn$g_l $txt_as$y_l oscam-svn$(REVISION)-$_toolchainname-list_smargo";
+			mv -f "$lsmn" "$bdir/oscam-svn$(REVISION)-$_toolchainname-list_smargo";
+			tartmp="oscam-svn$(REVISION)-$_toolchainname-list_smargo";
+		fi;
+	fi;
+
+#remove debug binary
+	if [ "${s3cfg_vars[delete_oscamdebugbinary]}" == "1" ] && [ -f "$bdir/$oscam_name.debug" ];then
+		echo -e "$r_l"" REMOVE ----->  $w_l$bdir/$oscam_name.debug";rm "$bdir/$oscam_name.debug";
+	fi;
+
+#show build time
+	echo -e "$g_n""\n TIME -------> $bt\n$re_";
+
+#compress cam
+	if [ "${s3cfg_vars[COMPRESS]}" == "1" ];then
+		echo -en "$w_l"" ENABLE -----> COMPRESSION:$y_l $txt_wait";
+		compress_cam "$oscam_name";
+	fi;
+	if [ "${s3cfg_vars[TARGZ]}" == "1" ];then
+		echo -en "$w_l"" ENABLE ----> TARGZ:$y_l $txt_wait\n";
+		tar_cam "$oscam_name" "$tartmp";
+	fi;
+
+#link lastlog
+	ln -sf "$ldir/$log_name" "$workdir/lastbuild.log";
+
+#build error message
+	error_on_build=$(grep -c1 error "$ldir/$log_name");
+	[ "$error_on_build" -gt "0" ] && echo -e "$r_l\terrors on build found$w_l";
+	echo -e "$re_";
+	exit;
+};
diff --git a/support/functions/_compress b/support/functions/_compress
new file mode 100644
index 0000000..6687849
--- /dev/null
+++ b/support/functions/_compress
@@ -0,0 +1,93 @@
+#!/bin/bash
+
+compress_cam(){
+	cd "$bdir";
+	upx_c="-1";
+	[ -f "$configdir/upx_option" ] && source "$configdir/upx_option";
+	erg=$(upx "$upx_c" "$1" |grep oscam |awk '{print $1" "$3" "$4 }');
+	e1="$(echo "$erg"| awk '{printf("%4.2f k\n", $1 /1024)}')";
+	e2="$(echo "$erg"| awk '{printf("%4.2fk\n", $2 /1024)}')";
+	e3="$(echo "$erg"| awk '{print $3}')";
+	echo -e "$w_l\n\n BEFORE -----> $txt_compress1\t= $g_n$e1$w_l\n AFTER ------> $txt_compress2\t= $g_l$e2$w_l\n RESULT -----> $txt_compress3\t= $c_n$e3$rs_\n";
+};
+compress_cam_gui(){
+	cd "$bdir";
+	upx_c="-1";
+	[ -f "$configdir/upx_option" ] && source "$configdir/upx_option";
+	erg=$(upx "$upx_c" "$1" |grep oscam |awk '{print $1" "$3" "$4 }');
+	e1="$(echo "$erg"| awk '{printf("%4.2f k\n", $1 /1024)}')";
+	e2="$(echo "$erg"| awk '{printf("%4.2fk\n", $2 /1024)}')";
+	e3="$(echo "$erg"| awk '{print $3}')";
+	echo -e "\n $txt_compress1\t= $e1\n $txt_compress2\t= $e2\n $txt_compress3\t= $e3";
+};
+tar_cam_gui(){
+	cd "$bdir";
+	erg=$(tar zcf $1.tar.gz $1 $2);
+	if [ -f "$1.tar.gz" ];then
+		echo -e "\n $1.tar.gz\n created";
+		if [ -f "$adir/$1.tar.gz" ];then
+			rm -rf "$adir/$1.tar.gz";
+			mv -f "$1.tar.gz" "$adir";
+			echo -e "\n $1.tar.gz\n moved to $workdir/archive\n";
+		else
+			mv -f "$1.tar.gz" "$adir";
+			echo -e "\n $1.tar.gz\n moved to $workdir/archive\n";
+		fi;
+	else
+		echo -e "\nerror\n no $1.tar.gz\n created";
+	fi;
+};
+tar_cam(){
+	cd "$bdir";
+	if [ -n $2 ];then
+		echo -en "$y_n\n TAR -------->$w_l $1$g_l $txt_as$w_l $1.tar.gz$rs_";
+	fi;
+	erg=$(tar zcf $1.tar.gz $1 $2);
+	if [ -f "$1.tar.gz" ];then
+		echo -e "$p_n$txt_done$rs_";
+		if [ -f "$adir/$1.tar.gz" ];then
+			rm -rf "$adir/$1.tar.gz";
+			mv -f "$1.tar.gz" "$adir";
+			echo -e "$c_l"" MOVE -------> $p_l$1.tar.gz $g_l$txt_to $y_n$workdir/archive\n$rs_";
+		else
+			mv -f "$1.tar.gz" "$adir";
+			echo -e "$c_l"" MOVE -------> $p_l$1.tar.gz $g_l$txt_to $y_n$workdir/archive\n$rs_";
+		fi;
+	else
+		echo -e "$r_l\nerror\n no $1.tar.gz\n created$rs_";
+	fi;
+};
+tarsvn(){
+	cd "$workdir";
+	if [ -f "$svndir/config.sh" ];then
+		cat "$svndir/config.sh" >"$configdir/config.sh.master";
+		[ -f "$svndir/Makefile" ]&& cat "$svndir/Makefile" >"$configdir/Makefile.master";
+		echo -en "$w_l  SVN Backup    :$c_l ";
+		tar -zcf "$bsvn/$("$svndir/config.sh" -r).tar.gz" oscam-svn;
+	fi;
+	cd "$bsvn";
+	ln -sf "$bsvn/$("$svndir/config.sh" -r).tar.gz" "last.tar.gz";
+	echo -e "done\n$re_";
+};
+untarsvn(){
+	cd "$workdir";
+	[ -d oscam-svn ] && rm -rf oscam-svn;
+	if [ -z "$1" ];then
+		[ -f "$bsvn/last.tar.gz" ] && tar -xf "$bsvn/last.tar.gz";
+	else
+		if [ -f "$bsvn/$1.tar.gz" ];then
+			tar -xf "$bsvn/$1.tar.gz";
+			cd $bsvn;
+			ln -sf "$bsvn/$("$svndir/config.sh" -r).tar.gz" "last.tar.gz";
+		else
+			if [ -f "$bsvn/last.tar.gz" ];then
+				tar -xf "$bsvn/last.tar.gz";
+			else
+				echo -en "$w_l  SVN Backup    :$r_l $txt_not_found";
+				sleep 3;
+				checkout;
+			fi;
+		fi;
+	fi;
+	[ -f "$workdir/SVN-IS-PATCHED" ] && rm -f "$workdir/SVN-IS-PATCHED";
+};
\ No newline at end of file
diff --git a/support/functions/_gui_build b/support/functions/_gui_build
new file mode 100644
index 0000000..51cca4b
--- /dev/null
+++ b/support/functions/_gui_build
@@ -0,0 +1,117 @@
+#!/bin/bash
+
+_gui_build(){
+
+#init
+	oc_size=${#_oscamconfdir_custom};
+	[ "$oc_size" -gt "4" ] && _oscamconfdir_default="$_oscamconfdir_custom";
+
+	if [ "$_toolchainname" == "native" ];then
+		log_name="$(date +%F).$(date +%X).$(hostname).log";
+	else
+		log_name="$(date +%F).$(date +%X).$_toolchainname.log";
+	fi;
+
+	ologo >"$ldir/$log_name";
+	[ -f "$configdir/max_cpus" ] && cpus="$(cat "$configdir/max_cpus")" || cpus="$(CPUS)";
+	CROSS="$tcdir/$_toolchainname/bin/$_compiler";
+	[ -f "$configdir/compiler_option" ] && co=$(cat "$configdir/compiler_option") || co="-O2";
+
+#make clean
+	cd "$svndir";
+	make distclean > /dev/null 2>&1;
+	USESTRING_='';
+
+#do use_vars
+	for e2 in $USESTRING;do
+		[ "USE_$e2" == "USE_PATCH" ] && _apply_menupatch;is_blocked=0;
+		for e1 in $_block;do
+			if [ "$e1" == "USE_$e2" ];then
+				is_blocked=1;
+				[ "USE_$e2" == "USE_LIBUSB" ] && silent=$(./config.sh -D CARDREADER_SMARGO);
+			fi;
+		done;
+		[ "$is_blocked" == "0" ] && _us="USE_$e2 $_us";
+	done;
+
+	for e in $_us;do
+		if [ ! "$e" == "USE_TARGZ" ] && [ ! "$e" == "USE_COMPRESS" ] && [ ! "$e" == "USE_PATCH" ];then
+			USESTRING_="$e=1 $USESTRING_";
+		fi;
+	done;
+
+	if [ "${USE_vars[USE_PCSC]}"   == "USE_PCSC=1"   ];then
+		_pcsc="-pcsc"  ;
+	else
+		_pcsc=;
+	fi;
+	if [ "${USE_vars[USE_LIBUSB]}" == "USE_LIBUSB=1" ];then
+		_usb="-libusb";
+	else
+		_usb=;
+	fi;
+	USESTRING_=${USE_vars[@]};
+
+#todo add switch for verbose
+	_generate_oscam_name "$_toolchainname";
+	targztmp="$(mktemp)";
+	if [ ! "${USE_vars[USE_TARGZ]}" == "USE_TARGZ=1" ];then
+		s3cfg_vars[USE_TARGZ]=0;
+	fi;
+	check_smargo;
+
+#build
+	_sz;
+	(ologo; _nl;
+	timer_start;
+	make -j"$cpus" \
+		"CONF_DIR=$_oscamconfdir_default" "OSCAM_BIN=$bdir/$oscam_name" "CC_OPTS=$co $cc_opts" "CC_WARN=$cc_warn" "CROSS=$CROSS" $stapivar $USESTRING_ 2>&1 \
+		|tee "$ldir/$log_name" \
+		|grep --line-buffered -v 'BFD' \
+		|grep --line-buffered '^CC\|^GEN\|UseFlags\|  CONF_DIR =\|Binary\|LINK\|STRIP\|BUILD\|Addons\|Protocols\|Readers\|CardRdrs\|^/' \
+		|sed -u "s/^|/ |/g;s/^LINK/ LINK  >/g;s/^STRIP/ STRIP >/g;s/^CC\|^BUILD/ BUILD >/g;s/^GEN/ GEN   >/g;s/WEBIF_//g;s/WITH_//g;s/MODULE_//g;s/CS_//g;s/HAVE_//g;s/_CHARSETS//g;s/CW_CYCLE_CHECK/CWCC/g;s/SUPPORT//g;"
+	timer_stop;
+	timer_calc;
+
+#save list_smargo
+	cd "$svndir/Distribution";
+	lsmn="$(ls list_smargo* 2> /dev/null)";
+	if [ "${s3cfg_vars[SAVE_LISTSMARGO]}" == "1" ] && [ -f "$svndir/Distribution/$lsmn" ];then
+		if [ "$_toolchainname" == "native" ];then
+			echo -e "SAVE\t$lsmn $txt_as oscam-svn$(REVISION)-$(hostname)-list_smargo"| tee -a "$ldir/$log_name";
+			mv -f "$lsmn" "$bdir/oscam-svn$(REVISION)-$(hostname)-list_smargo";
+			echo "oscam-svn$(REVISION)-$(hostname)-list_smargo" >"$targztmp";
+		else
+			echo -e "SAVE\t$lsmn $txt_as oscam-svn$(REVISION)-$_toolchainname-list_smargo"|tee -a "$ldir/$log_name";
+			mv -f "$lsmn" "$bdir/oscam-svn$(REVISION)-$_toolchainname-list_smargo";
+			echo "oscam-svn$(REVISION)-$_toolchainname-list_smargo" >"$targztmp";
+		fi;
+	fi;
+
+#show buildtime
+	echo -e "\n TIME\t[ $txt_buildtime $((Tcalc / 60)) min(s) $((Tcalc % 60)) secs ]"| tee -a "$ldir/$log_name";sleep 1;
+
+#remove debug binary
+	if [ "${s3cfg_vars[delete_oscamdebugbinary]}" == "1" ] && [ -f "$bdir/$oscam_name.debug" ];then
+		rm "$bdir/$oscam_name.debug";
+		echo -e "\n $txt_delete $oscam_name.debug\n"|tee -a "$ldir/$log_name";
+	fi;) | "$gui" "$st_" --colors --title " -[ Build ]- " "$pb_" "$_lines" "$_cols";sleep 2;
+
+#COMPRESS
+	if [ ! "$stapi_allowed" == "1" ];then
+		if [ "${s3cfg_vars[COMPRESS]}" == "1" ] || [ "${USE_vars[USE_COMPRESS]}" == "USE_COMPRESS=1" ];then
+			(compress_cam_gui "$oscam_name") |tee -a "$ldir/$log_name"| "$gui" "$st_" --title " -[ COMPRESS ]- " "$pb_" 7 50;
+			sleep 2;
+		fi;
+	fi;
+
+#tar
+	if [ "${USE_vars[USE_TARGZ]}" == "USE_TARGZ=1" ];then
+		(tar_cam_gui "$oscam_name" "$(cat "$targztmp")") |tee -a "$ldir/$log_name"| "$gui" "$st_" --title " -[ TAR Binary ]- " "$pb_" 10 70;
+		sleep 2;
+	fi;
+
+#link log
+	ln -sf "$ldir/$log_name" "$workdir/lastbuild.log";
+	[ -f "$targztmp" ] && rm -rf "$targztmp";
+};
\ No newline at end of file
diff --git a/support/functions/_help b/support/functions/_help
new file mode 100644
index 0000000..b544092
--- /dev/null
+++ b/support/functions/_help
@@ -0,0 +1,55 @@
+#!/bin/bash
+
+_help_toolchain(){
+	echo -e "$w_l  toolchains :\n  ------------$g_n";
+	helpline1 "${AVAI_TCLIST[@]}";
+	echo -e "\n";
+};
+helpline0(){
+	ll=0;
+	echo -en "  ";
+	for s in "$@";do
+		ll=$((ll + (${#s} + 4)));
+		if [ "$ll" -lt "30" ];then
+			echo -en "$s(_off) ";
+		else
+			echo -en "$s(_off)\n  ";
+			ll="";
+		fi;
+	done;
+};
+helpline1(){
+	ll=0;
+	echo -en "  ";
+	for s in "$@";do
+		ll=$((ll + (${#s} + 4)));
+		if [ "$ll" -lt "45" ];then
+			echo -en "$s "      ;
+		else
+			echo -en "$s\n  "      ;
+			ll="";
+		fi;
+	done;
+};
+_help(){ clear;s3logo;
+echo -e "  ----------------------------------";
+echo -e "  $txt_help1 $0 menu";
+echo -e "  $txt_help2";
+echo -e "  ----------------------------------";
+echo -e "$w_l\n  toolchains :\n  ------------$g_n";
+helpline1 "${AVAI_TCLIST[@]}";
+echo -e "$w_l\n  simplebuild options :\n  ---------------------$c_n";
+helpline1 "${s3opts[@]}";_wait;
+echo -e "$w_l  config_cases:\n  --------$c_n";
+helpline0 "${config_cases[@]}";
+echo -e "$w_l\n\n  addons :\n  --------$p_l";
+helpline0 "${SHORT_ADDONS[@]}";_wait;
+echo -e "$w_l  protocols :\n  -----------$y_l";
+helpline0 "${SHORT_PROTOCOLS[@]}";
+echo -e "$w_l\n  readers :\n  ---------$r_l";
+helpline0 "${SHORT_READERS[@]}";_wait;
+echo -e "$w_l  card_readers :\n  --------------$b_l";
+helpline0 "${SHORT_CARD_READERS[@]}";
+echo -e "$w_l\n  use_vars :\n  --------$w_n";
+helpline0 "${!USE_vars[@]}";_wait;
+};
\ No newline at end of file
diff --git a/support/functions/_logos b/support/functions/_logos
new file mode 100644
index 0000000..58c1dfb
--- /dev/null
+++ b/support/functions/_logos
@@ -0,0 +1,29 @@
+#!/bin/bash
+
+ologo(){
+	echo -en "$w_h";
+	printf "  %-s\n" "  ___  ____   ___" " / _ \\/ ___| / __|__ _ _ __ ___" "| | | \\___ \\| |  / _\` | '_ \` _ \ " "| |_| |___) | |_| (_| | | | | | |" " \\___/|____/ \\___\\__,_|_| |_| |_|" " ";
+};
+slogo(){
+	echo -en "$w_h";
+	printf "  %-s\n" "     _                            _                         _ " " ___| |_ _ __ ___  __ _ _ __ ___ | |__   ___   __ _ _ __ __| |" "/ __| __| '__/ _ \/ _\` | '_ \` _ \| '_ \ / _ \ / _\` | '__/ _\` |" "\__ \ |_| | |  __/ (_| | | | | | | |_) | (_) | (_| | | | (_| |" "|___/\__|_|  \___|\__,_|_| |_| |_|_.__/ \___/ \__,_|_|  \__,_|" "                                                              ";
+};
+bye(){
+	clear;
+	echo -en "$re_$w_l";
+	printf "\n\t\t simplebuild made for";
+	echo -e "$c_l";
+	slogo;
+	echo -e "\e[8;50H \e[8;50f" && echo -en "$g_l\t\t\t\t\t\t by gorgone $re_";
+	echo -e "\n";
+	exit;
+};
+s3logo(){
+echo -e $C"
+    _________________
+   /   _____/\\_____  \\   ===============
+   \_____  \\   _(__  <  $w_l Version $SIMPLEVERSION$C
+   /        \\ /       \\  ===============
+  /_______  //______  / $y_l by gorgone$p_l 2019$C
+          \\/        \/   ===============\n$W";
+};
\ No newline at end of file
diff --git a/support/functions/_misc b/support/functions/_misc
new file mode 100644
index 0000000..6d54602
--- /dev/null
+++ b/support/functions/_misc
@@ -0,0 +1,547 @@
+#!/bin/bash
+
+CPUS(){ nproc;};
+clean(){ _clean;};
+_nl(){ echo -e "$rs_";};
+_set_dialog_types(){
+	gui="$(which dialog)";
+	st_="--stdout";
+	ib_="--infobox";
+	ip_="--inputbox";
+	nc_="--no-cancel";
+	cl_="--checklist";
+	rl_="--radiolist";
+	bt_="--backtitle";
+	pb_="--progressbox";
+	title_="SIMPLEBUILD_V($SIMPLEVERSION)";};
+cedit(){ s3cfg_menu;bye;};
+counter(){ COUNT="$((COUNT+1))";};
+timer_calc(){ Tcalc="$((Te-Ts))";};
+timer_stop(){ Te="$(date +%s)";};
+timer_start(){ Ts="$(date +%s)";};
+decode(){ echo -en "$1" | base64 -d;};
+get_module_name(){ echo "${INTERNAL_MODULES[$1]}";};
+_fix_config_h(){ _=0;
+#_pcsc_off;_stapi5_off;
+};
+_wait(){ echo -e "$w_l";read -n1 -r -p "  $txt_help3" key;tput cuu1;echo '                                          ';}
+_systype(){ systype="bad";case "$(uname -m)" in x86|x86_64|amd64|i686) systype="ok";;esac;};
+_pcsc_on(){  sed -i 's@^//#define CARDREADER_PCSC 1@#define CARDREADER_PCSC 1@g' "$svndir/config.h";};
+_pcsc_off(){ sed -i 's@^#define CARDREADER_PCSC 1@//#define CARDREADER_PCSC 1@g' "$svndir/config.h";};
+_stapi5_on(){  sed -i 's@^//#define CARDREADER_STAPI5 1@#define CARDREADER_STAPI5 1@g' "$svndir/config.h";};
+_stapi5_off(){ sed -i 's@^#define CARDREADER_STAPI5 1@//#define CARDREADER_STAPI5 1@g' "$svndir/config.h";};
+_generate_oscam_name(){ cd "$svndir";_dvbapi=$(
+[ "$(./config.sh --enabled HAVE_DVBAPI)" == Y ] && echo -n -dvbapi || echo ''; );_webif=$(
+[ "$(./config.sh --enabled WEBIF)"       == Y ] && echo -n -webif  || echo ''; );_ssl=$(
+[ "$(./config.sh --enabled WITH_SSL)"    == Y ] && echo -n -ssl    || echo ''; );_emu=$(
+[ "$(./config.sh --enabled WITH_EMU)"    == Y ] && echo -n -emu    || echo ''; );_ipv6=$(
+[ "$(./config.sh --enabled IPV6SUPPORT)" == Y ] && echo -n -ipv6   || echo ''; );
+[ "${USE_vars[USE_COMPRESS]}" == "USE_COMPRESS=1" ] && _upx="-upx" || _upx='';
+[ "$1" == "native" ] && _b_name="$(hostname)$_upx" || _b_name="$1";
+oscam_name="oscam-svn$(REVISION)-$_b_name$_webif$_dvbapi$_ssl$_usb$_pcsc$_stapi$_stapi5$_emu$_ipv6$_upx";};
+e_readers(){ silent=$("$svndir/config.sh" -s readers);echo ${silent//READER_/};};
+e_protocols() { silent=$("$svndir/config.sh" -s protocols);echo ${silent//MODULE_/};};
+e_card_readers(){ silent=$("$svndir/config.sh" -s card_readers);echo ${silent//CARDREADER_/};};
+e_addons(){ "$svndir/config.sh" -s addons |sed 's/WEBIF_//g;s/WITH_//g;s/MODULE_//g;s/CS_//g;s/HAVE_//g;s/_CHARSETS//g;s/CW_CYCLE_CHECK/CWCC/g;s/SUPPORT//g';};
+sysinfo(){
+	echo -e "$g_l\nSYSTEM$w_l";
+	system_info=$(which lsb_release);
+	[ ${#system_info} -ge 11 ] && lsb_release -irc;
+	echo -e "Uptime:\t\t$(uptime -p)";
+	echo -e "$g_l\nMEMORY$w_l";
+	free -mht | awk '/Mem/{print "Memory:\t\tTotal: " $2 "Mb\tUsed: " $3 "Mb\tFree: " $4 "Mb"} /Swap/{print "Swap:\t\tTotal: " $2 "Mb\tUsed: " $3 "Mb\tFree: " $4 "Mb" }';
+	[ -f /sys/dev/block ] && lsblk;
+	echo -e "$g_l\n CPU$w_l";
+	cpu_info=$(which lscpu);
+	[ ${#cpu_info} -ge 5 ] && lscpu | grep -iE 'model name|vendor id|Architecture|per socket|MHz';
+	echo -e "$g_l\nNetwork";
+	echo -e "$w_l""Hostname:\t$HOSTNAME";
+	ip -o addr | awk '/inet /{print "IP (" $2 "):\t" $4}';
+	route -n | awk '/^0.0.0.0/{ printf "Gateway:\t"$2"\n" }';
+	awk '/^nameserver/{ printf "Name Server:\t" $2 "\n"}' /etc/resolv.conf;
+	echo -e "$re_";
+	exit;
+};
+_pget(){
+	tc_dl="$dldir/$(decode "$_t1e""$_toolchainfilename")";
+	[ -f "$tc_dl" ] && rm -rf "$tc_dl";
+	#tput civis;
+	cd "$dldir";
+	zeile=$(expr 12+$zzusatz);
+	spalte=$(expr 17+$szusatz);
+	wget -N --progress=dot "$(decode "$_u1e")/$dln" 2>&1 |grep --line-buffered "%"|awk '{ printf "\033["'$zeile'";"'$spalte'"H\033[K%-4s ", $7;} {printf "'"$txt_wait >"'";} {printf " %-6s",$9;}';
+	echo -e "\033["$zeile";"$spalte"H\033[K100% done...                    "$W;
+	#tput cnorm;
+};
+_clean(){
+	[ -L "$workdir/lastbuild.log" ] && rm -rf "$workdir/lastbuild.log";
+	[ -L "$workdir/lastpatch.log" ] && rm -rf "$workdir/lastpatch.log";
+	clear;
+	echo -e "$w_l";
+	ologo;
+	for e in "$menudir" "$bdir" "$ldir" "$tcdir";do
+		echo -e "  $r_l$txt_delete$w_l\t$e"| sed "s@$workdir@@g";
+	done;
+	rm -rf "$menudir" "$bdir" "$ldir" "$tcdir" 2>/dev/null;
+	for e in "$menudir" "$bdir" "$ldir" "$tcdir";do
+		echo -e "  $g_l$txt_create$w_l\t$e"| sed "s@$workdir@@g";
+	done;
+	mkdir -p "$menudir" "$bdir" "$ldir" "$tcdir" 2>/dev/null;
+	sleep 2;
+	svnrestore;
+	_nl;
+};
+_sz(){
+	lmin=24;
+	lmax=40;
+	_lin=$(tput lines);
+	cmin=79;
+	cmax=200;
+	_col=$(tput cols);
+	if [ "$_lin" -gt "$lmin" ];then
+		if [ "$_lin" -lt "$lmax" ] || [ "$_lin" -eq "$lmax" ];then
+			_lines="$((_lin-6))";
+		fi;
+		if [ "$_lin" -gt "$lmax" ];then
+			_lines="$((lmax-6))";
+		fi;
+	fi;
+	if [ "$_col" -gt "$cmin" ];then
+		if [ "$_col" -lt "$cmax" ] || [ "$_col" -eq "$cmax" ];then
+			_cols="$((_col-6))";
+		fi;
+		if [ "$_col" -gt "$cmax" ];then
+			_cols="$((cmax-6))";
+		fi;
+	fi;
+};
+save_master(){
+	[ -f "$svndir/config.sh" ] && cat "$svndir/config.sh" >"$configdir/config.sh.master";
+	[ -f "$svndir/Makefile" ] && cat "$svndir/Makefile" >"$configdir/Makefile.master";
+};
+_pre_build(){
+	_oscamconfdir_default="";
+	_oscamconfdir_custom="";
+	source "$tccfgdir/$1";
+	clear;
+	_nl;
+	echo $WH;
+	ologo;
+	_tcfile="";
+	dln="$(decode "$_t1e")$(decode "$_toolchainfilename")";
+	tc_dl="$dldir/$dln";
+	if [ -f "$tcdir/$_toolchainname/bin/$_compiler""gcc" ];then
+		if [ "$run" == "0" ];then
+			echo -e "$w_l   toolchain :$y_l $_toolchainname";
+			echo -e "$w_l      status :$g_l compiler $txt_found ";
+			echo -e "$w_l    compiler :$p_l $_compiler""gcc";
+		else
+			echo -e "$w_l   toolchain :$y_l $_toolchainname      ";
+			echo -e "$w_l     recheck :$g_l ok $txt_now compiler $txt_found";
+			echo -e "$w_l    compiler :$p_l $_compiler""gcc      ";
+		fi;
+	else
+		[ "$run" == "1" ] && echo "$txt_error : build not possible" && exit;
+		_nl;
+		echo -e  "$w_l     toolchain :$y_l $_toolchainname   ";
+		echo -e  "$w_l        status :$r_l compiler $txt_not_found";
+		echo -en "$w_l   backupcheck : ";
+		if [ -f "$dldir/$dln" ];then
+			echo -e  "$g_l$dln $txt_found";
+			echo -en "$w_l     $txt_extracting :$y_l $txt_wait";
+			_console_extract_toolchain;
+			run=1;
+		else
+			echo -e  "$r_l$dln $txt_not_found ";
+			echo -en "$w_l      $txt_loading :$g_l";
+			zzusatz=1;szusatz=1;
+			_pget;
+			_nl;
+			echo -en "$w_l     $txt_extracting :$y_l $txt_wait";
+			_console_extract_toolchain 1;
+			run=1;
+		fi;
+		_pre_build "$1";
+	fi;
+	_cmd_build "$_toolchainname";
+};
+_init_menu(){ IFS="#";COUNT=0;MENU_OPTIONS="BACK#$txt_back#";counter;};
+_select_menu(){
+	revision_="$(REVISION)";
+	_menutext="Simplebuild V$SIMPLEVERSION by Gorgone";
+	smenu=$(
+	"$gui" "$st_" "$bt_" "$title_" "$nc_" --title "-[ $txt_start_menu ]-" --menu "\n $_menutext" 13 55 7 "Continue" "$txt_firstmenu_continue r$revision_" "CHANGE" "$txt_firstmenu_chose" "CEDIT" "$txt_firstmenu_cedit" "LANG" "$txt_firstmenu_lang" "EXIT" "$txt_firstmenu_exit");
+	[ $? = 255 ] && _select_menu;
+	case $smenu in
+		Continue)
+					if [ ! -f "$svndir/config.sh" ];then
+						"$gui" "$st_" "$bt_" "$title_" --infobox "\n  $txt_no oscam-svn $txt_found" 5 35;
+						sleep 2;
+						_select_menu;
+					else
+						_toolchain_main_menu;
+					fi;;
+		CHANGE)
+					new_rev=$("$gui" "$st_" "$nc_" --cr-wrap "$ip_" "Revision: 7000+ \nRevision: 0 = $txt_latest" 9 35);
+					[[ $new_rev =~ ^-?[0-9]+$ ]] && [ ! "$new_rev" -le "7000" ] && _rev="$new_rev" || _rev=0;
+					_dialog_checkout1 "$_rev";
+					_select_menu;;
+		CEDIT)
+					s3cfg_menu;
+					_select_menu;;
+		LANG)
+					lang_select;
+					cd "$workdir";
+					./s3 menu;;
+		EXIT)
+					bye;;
+	esac;
+	exit;
+};
+_oscam_extra_menu(){
+	uv=;
+	check_smargo;
+	unset MENU_OPTIONS;
+	for e in "${!USE_vars[@]}";do
+		if [ ! "$e" == "USE_TARGZ" ] && [ ! "$e" == "USE_COMPRESS" ] && [ ! "$e" == "USE_PATCH" ] && [ ! "$e" == "USE_LIBUSB" ];then
+			if [ "${#USE_vars[$e]}" -gt "4" ];then
+				MENU_OPTIONS+=( "$e" "$e" on );
+			else
+				MENU_OPTIONS+=( "$e" "$e" off );
+			fi;
+		fi;
+	done;
+	oextra=$("$gui" "$st_" "$nc_" "$bt_" "$title_" --title "-[ Oscam EXTRA ]-" "$cl_" " OPTIONS " 19 40 12 ${MENU_OPTIONS[@]});
+	[ $? = 255 ] && _toolchain_extra_menu;
+	for e in "${!USE_vars[@]}";do
+		if [ ! "$e" == "USE_TARGZ" ] && [ ! "$e" == "USE_COMPRESS" ] && [ ! "$e" == "USE_PATCH" ] && [ ! "$e" == "USE_LIBUSB" ];then
+			ok=0;
+			for oex in $oextra;do
+				o=$(echo "$oex" | tr -d '"');
+				[ "$e" == "$o" ] && ok=1;
+			done;
+			if [ "$ok" == "1" ];then
+				USE_vars[$e]="$e=1";
+			else
+				USE_vars[$e]=;
+			fi;
+		fi;
+	done;
+	[ "${USE_vars[USE_PCSC]}" == "USE_PCSC=1" ] && _pcsc_on;
+	[ ! "${USE_vars[USE_PCSC]}" == "USE_PCSC=1" ] && _pcsc_off;
+	save_config;
+	_toolchain_config_menu;
+};
+_build_extra_menu(){
+	us=;
+	check_smargo;
+	unset MENU_OPTIONS;
+	for e in USE_COMPRESS USE_TARGZ USE_PATCH;do
+		[ "${#USE_vars[$e]}" -gt "4" ] && MENU_OPTIONS+=( "$e" "$e=1" on ) || MENU_OPTIONS+=( "$e" "$e=1" off );
+	done;
+	bextra=$("$gui" "$st_" "$nc_" "$bt_" "$title_" --title "-[ Build EXTRA ]-" "$cl_" " OPTIONS " 10 40 3 ${MENU_OPTIONS[@]});
+	[ $? = 255 ] && _build_extra_menu;
+	USE_vars[USE_COMPRESS]=;
+	USE_vars[USE_PATCH]=;
+	USE_vars[USE_TARGZ]=;
+	for bex in $bextra;do
+		b=$(echo "$bex" | tr -d '"');
+		USE_vars[$b]="$b=1";
+	done;
+	save_config;
+	_toolchain_config_menu;
+};
+_pre_main_menu(){
+	IFS="#";
+	COUNT=0;
+	MENU_OPTIONS="EXIT#$txt_menu_builder1#";
+	counter;
+	MENU_OPTIONS=${MENU_OPTIONS}"ADD#$txt_menu_builder2#";
+	counter;
+	if [ "$tcempty" == "0" ];then
+		MENU_OPTIONS="${MENU_OPTIONS}REMOVE#$txt_menu_builder3#";
+		counter;
+	fi;
+	MENU_OPTIONS="${MENU_OPTIONS}NATIVE#$txt_menu_builder4$native#";
+	counter;
+	_a=$(uname -m);
+	if [ "$systype" == "ok" ];then
+		if [ "$tcempty" == "0" ];then
+			for i in "${INST_TCLIST[@]}";do
+				source "$tccfgdir/$i";
+				MENU_OPTIONS="${MENU_OPTIONS}$_toolchainname#$_description#";
+				counter;
+			done;
+		fi;
+	fi;
+	out=$("$gui" --help-button --help-label INFO --title "-[ Toolchain Menu V$SIMPLEVERSION ]-" --menu "$txt_t_menu1$REVISION" "${COUNT+8}" 75 0 "${MENU_OPTIONS}");
+	IFS=$OIFS;
+	first=$(echo "$out" | awk '{printf $1}');
+	tc_info=$(echo "$out" | awk '{printf $2}');
+	if [ "$first" == "HELP" ];then
+		if [ -f "$tccfgdir/$(echo "$out" | awk '{printf $2}')" ];then
+			source "$tccfgdir/$tc_info";
+			echo -e "\n\n\tinfobox $_tc_info";
+			sleep 4;
+		fi;
+	fi;
+	if [ "$first" == "EXIT" ];then
+		bye;
+	else
+		toolchain_main_menu;
+	fi;
+};
+tedit(){
+	clear;
+	if [ -f "$tccfgdir/$1" ];then
+		source "$tccfgdir/$1";
+		echo -e  $y_l;
+		slogo;
+		echo -e  " $p_l change CONF_DIR for $c_l$_toolchainname$w_l\n";
+		echo -e  $w_l"    current =$c_l $_oscamconfdir_custom";
+		echo -e  $w_l"    default =$c_l $_oscamconfdir_default";
+		echo -en $w_l"  Enter new =$w_l ";read name;
+		echo -e      "        now =$y_l CONF_DIR=$name\n$re_";
+		sed -i s@^_oscamconfdir_custom.*@_oscamconfdir_custom=\"$name\"@ "$tccfgdir/$_toolchainname";
+	fi;
+};
+_gtedit(){
+	if [ -f "$tccfgdir/$_toolchainname" ];then
+		source "$tccfgdir/$_toolchainname";
+		input=$("$gui" "$st_" "$bt_" "$title_" --title " -[ $1 Toolchain ]- " --inputbox "\n CONF_DIR=$_oscamconfdir_default 'default'\n [ESC] = default\n" 0 0 "$_oscamconfdir_custom");
+		retval=$?;
+		case $retval in
+			0)
+				confdir="$input";;
+			1)
+				confdir="$_oscamconfdir_custom";;
+			255)
+				confdir="$_oscamconfdir_default";;
+		esac;
+		sed -i s@^_oscamconfdir_custom.*@_oscamconfdir_custom=\"$confdir\"@ "$tccfgdir/$_toolchainname";
+		source "$tccfgdir/$_toolchainname";
+	fi;
+};
+check_smargo(){
+	if [ -f "$svndir/config.sh" ];then
+		if [ "$("$svndir/config.sh" -e CARDREADER_SMARGO)" == "Y" ];then
+			USE_vars[USE_LIBUSB]="USE_LIBUSB=1";
+		else
+			USE_vars[USE_LIBUSB]=;
+		fi;
+	fi;
+};
+_reset_config(){
+	if [ -f "$svndir/config.sh" ];then
+		[ -f "$menudir/$_toolchainname.save" ] && rm -rf "$menudir/$_toolchainname.save";
+		if [ ! -f "$workdir/SVN-IS-PATCHED" ];then
+			reset_="$("$svndir/config.sh" -R)";
+		fi;
+	else
+		_select_menu;
+	fi;
+};
+_get_config_menu(){
+	tmp="$(mktemp)";
+	while read -r _l;do
+		c=$(echo "$_l" | tr -cd \" | wc -c);
+		_c=$((_c + c));
+		[ ${_c} -lt 11 ] && echo "$_l" >>"$tmp";
+		[ ${_c} -eq 10 ] && break;
+	done <"$svndir/config.sh";
+	mk="$(grep '^   USE_' "$workdir/oscam-svn/Makefile" |sort -u|awk '{print $1}')";
+	for e in $mk;do
+		USE_vars[${e:0:-2}]=;
+	done;
+	check_smargo;
+	source "$tmp";
+	rm -rf "$tmp";
+};
+read_s3cfg(){
+	if [ -f "$s3cfg" ];then
+		while read l;do
+			s3cfg_vars[$(echo "$l"| awk -F'=' '{print $1}')]=$(echo "$l"| awk -F'=' '{print $2}');
+		done < "$s3cfg";
+	fi;
+};
+s3cfg_menu(){
+	unset CFG_MENU;
+	declare -a CFG_MENU;
+	old_IFS=$IFS;
+	COUNT=0;
+	found="";
+	for e in "${!s3cfg_vars[@]}";do
+		CFG_MENU+="$e#on/off#$([ "${s3cfg_vars[$e]}" -gt "0" ] && echo on || echo off)#";
+		counter;
+	done;
+	IFS="#";
+	erg=$("$gui" "$st_" "$bt_" "$title_" "$cl_" "enable/disable options" 16 45 10 ${CFG_MENU[@]});
+	IFS=$old_IFS;
+	for e1 in "${!s3cfg_vars[@]}";do
+		for e2 in $erg;do
+			found="0";
+			if [ "$e1" == "${e2//\'}" ];then
+				found="1";
+				break;
+			fi;
+		done;
+		if [ "$found" == "1" ];then
+			s3cfg_vars[$e1]=1;
+		else
+			s3cfg_vars[$e1]=0;
+		fi;
+	done;
+	write_s3cfg;
+};
+write_s3cfg(){
+	[ -f "$s3cfg" ] && rm -rf "$s3cfg";
+	for e in "${!s3cfg_vars[@]}";do
+		echo "$e=${s3cfg_vars[${e}]}" >>"$s3cfg";
+	done;
+};
+_stapi_select(){
+	if [ "$stapi_allowed" == "1" ];then
+		stapivar='';
+		addstapi=;
+		USESTRING=;
+		stapimode=$($gui $rl_ " SELECT STAPI MODE" 12 0 5 0 "STAPI_OFF" on 1 "USE_STAPI" off 2 "USE_STAPI5 UFS916" off 3 "USE_STAPI5 UFS916003" off 4 "USE_STAPI5 OPENBOX" off 3>&1 1>&2 2>&3);
+		usevars=$(echo $usevars | sed "s@USE_STAPI5@@" | xargs);
+		usevars=$(echo $usevars | sed "s@USE_STAPI@@" | xargs);
+		case $stapimode in
+			0)
+				stapivar=;;
+			1)
+				stapivar="STAPI_LIB=$sdir/stapi/liboscam_stapi.a";
+				addstapi="USE_STAPI";;
+			2)
+				stapivar="STAPI5_LIB=$sdir/stapi/liboscam_stapi5_UFS916.a";
+				addstapi="USE_STAPI5";;
+			3)
+				stapivar="STAPI5_LIB=$sdir/stapi/liboscam_stapi5_UFS916_0.03.a";
+				addstapi="USE_STAPI5";;
+			4)
+				stapivar="STAPI5_LIB=$sdir/stapi/liboscam_stapi5_OPENBOX.a";
+				addstapi="USE_STAPI5";;
+		esac;
+		save_config;
+	else
+		"$gui" "$st_" --title "STAPI INFO" --msgbox "NOT for $_toolchainname" 0 0;
+		_toolchain_config_menu;
+	fi;
+};
+
+save_config(){
+	usevars=;
+	enabled=;
+	disabled=;
+	check_smargo;
+	enabled=($("$svndir/config.sh" -s));
+	disabled=($("$svndir/config.sh" -Z));
+	[ "$_toolchainname" == "sh4" ] && unset USE_vars[USE_COMPRESS];
+	[ "$_toolchainname" == "sh_4" ] && unset USE_vars[USE_COMPRESS];
+	unset USE_vars[USE_STAPI];
+	unset USE_vars[USE_STAPI5];
+	for e in ${USE_vars[*]};do
+		usevars="${e:0:-2} $usevars";
+	done;
+	[ -f "$menudir/$_toolchainname.save" ] && rm -rf "$menudir/$_toolchainname.save";
+	echo "enabled=\"${enabled[*]}\""  >"$menudir/$_toolchainname.save";
+	echo "disabled=\"${disabled[*]}\"">>"$menudir/$_toolchainname.save";
+	if [ "$stapi_allowed" == "1" ];then
+		if [ "${#stapivar}" -gt "15" ];then
+			echo "stapivar=\"$stapivar\"">>"$menudir/$_toolchainname.save";
+			echo "usevars=\"$usevars $addstapi\"" >>"$menudir/$_toolchainname.save";
+		else
+			echo "usevars=\"$usevars\"" >>"$menudir/$_toolchainname.save";
+		fi;
+	else
+		echo "usevars=\"$usevars\"" >>"$menudir/$_toolchainname.save";
+	fi;
+};
+
+load_config(){
+	_stapi=;
+	_stapi5=;
+	enabled=;
+	disabled=;
+	stapivar="";
+	USESTRING=;
+	usevars=;
+	unset USE_vars[USE_STAPI];
+	unset USE_vars[USE_STAPI5];
+	if [ -f "$menudir/$_toolchainname.save" ];then
+		source "$menudir/$_toolchainname.save";
+		ena=$("$svndir/config.sh" -E $enabled);
+		dis=$("$svndir/config.sh" -D $disabled);
+		for e in $usevars;do
+			USE_vars[$e]="$e=1";
+			[ "$e" == "USE_LIBUSB" ] && silent=$("$svndir/config.sh" --enable CARDREADER_SMARGO);
+			[ "$e" == "USE_PCSC" ] && sed -i 's@^//#define CARDREADER_PCSC 1@#define CARDREADER_PCSC 1@g' "$svndir/config.h";
+		done;
+	else
+		_reset_config;
+		[ "${s3cfg_vars[USE_TARGZ]}" == "1" ] && USE_vars[USE_TARGZ]="USE_TARGZ=1";
+		[ "${s3cfg_vars[USE_COMPRESS]}" == "1" ] && USE_vars[USE_COMPRESS]="USE_COMPRESS=1";
+		for e in $default_use;do
+			USE_vars[$e]="$e=1";
+		done;
+	fi;
+	check_smargo;
+	[ "$_toolchainname" == "sh4" ] && unset USE_vars[USE_COMPRESS];
+	[ "$_toolchainname" == "sh_4" ] && unset USE_vars[USE_COMPRESS];
+	USESTRING="$(echo "${USE_vars[@]}"| sed 's@USE_@@g'| sed 's@=1@@g'| tr -s ' ')";
+};
+_get_config_con(){
+	if [ ! "$1" == "checkout" ] && [ ! "$1" == "clean" ];then
+		tmp="$(mktemp)";
+		if [ -f "$svndir/config.sh" ];then
+			while read -r _l;do
+				c=$(echo "$_l" | tr -cd \" | wc -c);
+				_c=$((_c + c));
+				[ ${_c} -lt 11 ] && echo "$_l" >>"$tmp";
+				[ ${_c} -eq 10 ] && break;
+			done <"$svndir/config.sh";
+		else
+			while read -r _l;do
+				c=$(echo "$_l" | tr -cd \" | wc -c);
+				_c=$((_c + c));
+				[ ${_c} -lt 11 ] && echo "$_l" >>"$tmp";
+				[ ${_c} -eq 10 ] && break;
+			done <"$configdir/config.sh.master";
+		fi;
+		if [ -f "$workdir/oscam-svn/Makefile" ];then
+			str_="$(grep '^   USE_' "$workdir/oscam-svn/Makefile"| sort -u| awk '{print $1}')";
+			for e in $str_;do
+				es="${e:0:-2}";
+				USE_vars[$es]=;
+			done;
+		else
+			str_="$(grep '^   USE_' "$configdir/Makefile.master"| sort -u| awk '{print $1}')";
+			for e in $str_;do
+				es="${e:0:-2}";
+				USE_vars[$es]=;
+			done;
+		fi;
+		check_smargo;
+		source "$tmp";
+		rm -rf "$tmp" "$tmp1";
+		rm -rf "$tmp.load" "$tmp1.load";
+	fi;
+};
+_gtedit(){
+	if [ -f "$tccfgdir/$_toolchainname" ];then
+		source "$tccfgdir/$_toolchainname";
+		input=$("$gui" "$st_" "$bt_" "$title_" --title " -[ $1 Toolchain ]- " --inputbox "\n CONF_DIR=$_oscamconfdir_default 'default'\n [ESC] = default\n" 0 0 "$_oscamconfdir_custom");
+		retval=$?;
+		case $retval in
+			0)
+				confdir="$input";;
+			1)
+				confdir="$_oscamconfdir_custom";;
+			255)
+				confdir="$_oscamconfdir_default";;
+		esac;
+		sed -i s@^_oscamconfdir_custom.*@_oscamconfdir_custom=\"$confdir\"@ "$tccfgdir/$_toolchainname";
+		source "$tccfgdir/$_toolchainname";
+	fi;
+};
\ No newline at end of file
diff --git a/support/functions/_patch b/support/functions/_patch
new file mode 100644
index 0000000..b7fe45f
--- /dev/null
+++ b/support/functions/_patch
@@ -0,0 +1,102 @@
+#!/bin/bash
+
+get_patch(){ _get_patch; };
+_get_patch(){
+	cd $pdir;
+	[ -f patch.url ] && source patch.url;
+	clear;
+	echo -e $C;
+	ologo;
+	echo -e $WH;
+	[ -f $PATCHNAME ] && echo -e "$Y   old patch found\n  remove  $P$PATCHNAME" && rm -f $PATCHNAME;
+	echo -e $W"  load $PATCHNAME";
+	wget -q -O$PATCHNAME $PATCHURL;
+	[ -f $PATCHNAME ] && echo -e $G"   ok$W new $PATCHNAME loadet\n" || echo -e $R"   patch not found\n"$W;
+};
+_apply_menupatch(){
+	cd "$pdir";
+	pf=(*);
+	if [ ${#pf[@]} -gt 1 ];then
+		[ -f "$workdir/SVN-IS-PATCHED" ] && quicksvnrestore $_toolchainname 2>/dev/null;
+		if [ ! -f "$workdir/SVN-IS-PATCHED" ];then
+			(if [ "$(ls -A "$pdir"/*.patch 2>/dev/null)" ];then
+				cd "$pdir";
+				unset patchlist;patchlist=`ls *.patch | sort -st '/' -k1,1`;
+				for e in ${patchlist[@]};do
+					_w="ok";
+					cd "$svndir";
+					patchlog="$(mktemp)";
+					echo "PATCH : apply $e";
+					patch -f -p0 < "$pdir/$e" >>"$patchlog" 2>/dev/null;
+					hunks=$(grep -c1 '^Hunk' "$patchlog");
+					fails=$(grep -c1 'hunks FAILED' "$patchlog");
+					if [ "$hunks" -gt "0" ];then
+						echo "PATCH : $hunks x HUNK for $e";
+						_w="hunk";
+					fi;
+					if [ "$fails" -gt "0" ];then
+						echo "PATCH : $fails x FAILS for $e";
+						_w="fail";
+					fi;
+				done;
+				case $_w in
+					ok)
+							echo "PATCH : done all ok";
+							touch "$workdir/SVN-IS-PATCHED";;
+					hunk)
+							echo "PATCH : done with warnings save $e.log";
+							cat $patchlog >>"$ldir/$e.log";
+							ln -sf "$ldir/$e.log" "$workdir/lastpatch.log";
+							touch "$workdir/SVN-IS-PATCHED";;
+					fail)
+							echo "PATCH : break build save $e.log";
+							cat $patchlog >>"$ldir/$e.log";
+							ln -sf "$ldir/$e.log" "$workdir/lastpatch.log";
+							touch "$workdir/SVN-IS-PATCHED";;
+				esac;
+				rm -rf "$patchlog";
+			fi;)|"$gui" "$st_" "$bt_" "$title_" "$pb_" 12 62;sleep 2;
+		fi;
+	fi;
+};
+_apply_consolepatch(){
+	if [ ! -f "$workdir/SVN-IS-PATCHED" ];then
+		cd "$pdir";
+		if [ "$(ls -1 "$pdir"/*.patch 2>/dev/null | wc -l)" -gt "0" ];then
+			unset patchlist;patchlist=`ls *.patch | sort -st '/' -k1,1`;
+			for e in ${patchlist[@]};do
+				_w=0;cd "$svndir";
+				patchlog="$(mktemp)";
+				echo -e "$y_l|     PATCH : apply $e";
+				patch -F 10 -f -p0 < "$pdir/$e" >>"$patchlog" 2>/dev/null;
+				hunks=$(grep -c1 "^Hunk" "$patchlog");
+				fails=$(grep -c1 "hunks FAILED" "$patchlog");
+				if [ "$hunks" -gt "0" ];then
+					echo -e "$y_l|     PATCH :$w_l $hunks x HUNK for $e";
+					_w=1;
+				fi;
+				if [ "$fails" -gt "0" ];then
+					echo -e  "$y_l|     PATCH :$r_n FAIL (breaking Build) = $fails";
+					echo -en "$w_l|   RESTORE :$c_w LAST SVN BACKUP in ";
+					for (( i=6; i>0; i--));do
+						sleep 1 & echo -en "$i\b";
+						wait;
+					done;
+					svnrestore lastsvn;
+					exit;
+				fi;
+				cat $patchlog >"$ldir/$e.log";
+				ln -sf "$ldir/$e.log" "$workdir/lastpatch.log";
+				rm -rf "$patchlog";
+			done;
+			if [ "$_w" -gt "0" ];then echo -e "$y_l|     PATCH : done with warnings";
+				touch "$workdir/SVN-IS-PATCHED";
+			else
+				echo -e "$y_l|     PATCH :$g_l done all ok$rs_";
+				touch "$workdir/SVN-IS-PATCHED";
+			fi;
+		else
+			echo -en "$y_l|     PATCH : no patch found\n";
+		fi;
+	fi;
+};
\ No newline at end of file
diff --git a/support/functions/_profiles b/support/functions/_profiles
new file mode 100644
index 0000000..9431d7e
--- /dev/null
+++ b/support/functions/_profiles
@@ -0,0 +1,104 @@
+#!/bin/bash
+
+profiles(){
+	_list_profiles;
+	exit;
+};
+_list_profiles(){
+	cd "$profdir";
+	profiles=(*.profile);
+	if [ ${#profiles[@]} -gt 0 ];then
+		echo -e "$c_l";
+		clear;
+		slogo;
+		echo -e "$y_l\n  $txt_profiles $txt_found $txt_for ( ./$(basename "$0") \"tcname\" -p=name.profile )";
+		echo -e "$w_l  ======================================================\n";i=0;
+		for e in "${profiles[@]}";do
+			((i++));
+			echo -e "$w_l  ($i) > $e";
+		done;
+	fi;
+	echo -e "\n$rs_";
+};
+_save_profile(){
+	if [ -f "$menudir/$_toolchainname.save" ];then
+		source "$menudir/$_toolchainname.save";
+		input=$("$gui" "$st_" "$bt_" "$title_" --title " -[ $1 Toolchain ]- " $ip_ "\n SAVE PROFILE\n" 0 0 "$_toolchainname");
+		echo $enabled $usevars | sed -e 's/CARDREADER_//g;s/READER_//g;s/MODULE_//g;s/HAVE_//g;s/WEBIF_//g;s/WITH_//g;s/CS_//g;s/_CHARSETS//g;s/CW_CYCLE_CHECK/CWCC/g;s/SUPPORT//g;' >"$profdir/$input.profile";
+	fi;
+};
+_load_profile(){
+	if [ "$(ls -A "$profdir")" ];then
+		ok=0;
+		loadprofile="no";
+		USESTRING=;
+		_create_module_arrays;
+		unset selection;
+		declare -a SELECTION;
+		cd "$profdir";
+		p_files=(*.profile);
+		i=0;
+		for e in "${p_files[@]}";do
+			((i++));SELECTION+=($e '<');
+		done;
+		pselect=$("$gui" "$st_" "$bt_" "$title_" --no-cancel --title " -[ $txt_select_profile_title ]- " --menu "\n $txt_select_profile\n\n" 0 0 "$i" "${SELECTION[@]}");
+		[ $? = 255 ] && loadprofile="yes" && _toolchain_build_menu;
+		"$gui" "$st_" "$bt_" "$title_" --yesno "\n$txt_confirm_profile_select\n\n$pselect\n\n" 0 0;
+		response=$?;
+		case "$response" in
+			1)
+					loadprofile="yes";
+					_toolchain_build_menu;;
+			255)
+					loadprofile="yes";
+					_toolchain_build_menu;;
+		esac;
+		if [ -f "$profdir/$pselect" ];then
+			profile_vars=$(cat "$profdir/$pselect";);
+			reset_="$("$svndir/config.sh" -D all)";
+			for e in "${!USE_vars[@]}";do
+				USE_vars[$e]=;
+			done;
+			for e1 in $profile_vars;do
+				for e2 in "${!USE_vars[@]}";do
+					[ "$e1" == "$e2" ] && USE_vars[$e1]="$e1=1";
+				done;
+				for sm in "${SHORT_MODULENAMES[@]}";do
+					if [ "$e1" == "$sm" ];then
+						_em_="$_em_ $(get_module_name "$sm")";
+					fi;
+				done;
+			done;
+			_set_=$("$svndir/config.sh" -E $_em_);
+			USESTRING="$(echo "${USE_vars[@]}"| sed 's@USE_@@g' | sed 's@=1@@g'| tr -s ' ')";
+			loadprofile="yes";
+		fi;
+	else
+		$gui --msgbox "\n$txt_no_profile_found \n " 0 0;
+	fi;
+	loadprofile="no";
+};
+_create_native_profile(){
+	[ ! -d "$tcdir/native/bin" ] && mkdir -p "$tcdir/native/bin";
+	cd "$tcdir/native/bin";
+	g="$(which gcc)";
+	stripvar="$(which strip)";
+	compiler_link="$($g -dumpmachine)-gcc";
+	strip_link="$($g -dumpmachine)-strip";
+	[ ! -L "$compiler_link" ] && ln -sf "$g"     "$compiler_link";
+	[ ! -L "$strip_link" ]    && ln -sf "$stripvar" "$strip_link";
+	cd "$tccfgdir";
+	cat << EOF > native
+_toolchainname="native";
+default_use="USE_UTF8 USE_LIBCRYPTO";
+_oscamconfdir_default="/usr/local/etc";
+_oscamconfdir_custom="not_set";
+_compiler="$($g -dumpmachine)-";
+_tc_info="Native System Compiler \
+$(gcc --version)";
+_libsearchdir="/lib";
+_menuname="native";
+_sysroot="/";
+EOF
+cd "$workdir";
+};
diff --git a/support/functions/_subversion b/support/functions/_subversion
new file mode 100644
index 0000000..91bfef1
--- /dev/null
+++ b/support/functions/_subversion
@@ -0,0 +1,193 @@
+#!/bin/bash
+
+checkout(){
+	echo -en "$c_l";
+	fc1="$(mktemp)";
+	clear;
+	ologo;
+	i=0;
+	COUNT=0;
+	if [ -d "$svndir" ];then
+		rm -rf "$svndir";
+		echo -e "$p_l\n  $txt_delete $txt_existing oscam-svn $re_\n";
+	else
+		echo -e "$p_l\n  $txt_no oscam-svn $txt_found\n$re_";
+	fi;
+	echo -e  "$w_l  SVN TrunkURL  : $g_l$trunkurl$re_";
+	[ ! -z "$1" ] && [ $(($1)) -gt 6999 ] && opt_="-r$1" && mac_="($txt_selected)" || opt_='';
+	echo -en "$w_l  SVN FileCount : ";
+	svn info -R "$trunkurl" |grep '^URL' |uniq |wc -l >"$fc1";
+	n=$(cat "$fc1");
+	echo -e "$g_l""$txt_found $n";
+	echo -en "$w_l  SVN checkout  : ";
+	while read line filename;do
+		counter=$(( 100*(++i)/n));
+		tput cup 11 18;
+		[ "$counter" -lt "100" ] && echo -en "$g_l""$counter%$re_" || echo -en "$g_l""100%$re_";
+	done < <( svn co "$trunkurl" $opt_ "$svndir" |sed "s|$svndir/||g");
+	tput cup 11 18;
+	echo -en "$g_l""100%$re_";
+	if [ -f "$svndir/config.sh" ];then
+		tput cup 12 2;
+		echo -en "$w_l""SVN Revision  : $y_l""$("$svndir/config.sh" -r) $b_l$mac_$re_\n$w_l  SVN UserPath  : $y_l""$svndir";
+	fi;
+	[ -f "$svndir/config.h" ]&& reset_="$("$svndir/config.sh" -R)";
+	_fix_config_h;
+	rm -rf "$fc1";
+	_nl;
+	[ -f "$workdir/SVN-IS-PATCHED" ] && rm -f "$workdir/SVN-IS-PATCHED";
+	tarsvn;
+};
+svnrestore(){
+	clear;
+	echo -en "$c_l";
+	ologo;
+	if [ "$1" == "list" ];then
+		cd "$bsvn";
+		bfiles="$(find . -type f |sed 's|./||' |sed 's|.tar.gz||')";
+		bcount=$(echo "$bfiles" |wc -w);
+		if [ "$bcount" -gt "0" ];then
+			echo -e "\n$c_l    $bcount$w_l svn backups found\n    ____________________$re_\n";
+			for b in $bfiles;do
+				echo -e "$c_l    --> $w_l$b";
+			done;
+			_nl;
+		else
+			echo -e "\n$r_l    $bcount$w_l svn backups found\n    ____________________$re_\n";
+		fi;
+		exit;
+	fi;
+	if [ -d "$svndir" ];then
+		rm -rf "$svndir";
+		echo -e "$p_l\n  $txt_delete $txt_existing oscam-svn $re_\n";
+	else
+		echo -e "$p_l\n  $txt_no oscam-svn $txt_found\n$re_";
+	fi;
+	untarsvn $1;
+	[ -f "$svndir/config.h" ]&& echo -en "$w_l""  SVN Revision  : $y_l""$("$svndir/config.sh" -r) restored\n\n$re_";
+};
+quicksvnrestore(){
+	untarsvn $1;
+};
+svnup(){
+	echo -en "$c_l";
+	clear;
+	ologo;
+	i=1;
+	if [ -d "$svndir" ];then
+		echo -en "$p_l\n  $txt_update oscam-svn $re_\n";
+	else
+		checkout;
+		return;
+	fi;
+	echo -en "\n$w_l  SVN TrunkURL  : $g_l""$trunkurl""$re_";
+	svn co "$trunkurl" "$svndir" -q;
+	if [ -f "$svndir/config.sh" ];then
+		tput cup 10 2;
+		echo -e "$w_l""SVN Revision  : ""$y_l$("$svndir/config.sh" -r) $b_l$mac_$re_\n$w_l  SVN UserPath  : $y_l""$svndir\n$re_";
+	fi;
+	if [ -f "$svndir/config.h" ];then
+		reset_="$("$svndir/config.sh" -R)";
+		_fix_config_h;
+	fi;
+};
+svnpatch(){
+	if [ ! -f "$workdir/SVN-IS-PATCHED" ];then
+		clear;
+		echo -e $C;
+		ologo;
+		unset patchlist;
+		cd "$pdir";
+		patchlist=(*.patch);
+		if [ "$(ls -A "$pdir"/*.patch 2>/dev/null)" ];then
+			touch "$workdir/SVN-IS-PATCHED";
+			for p in "${patchlist[@]}";do
+				echo -e $WH"\n\n    -> $p <-\n"$W;
+				sleep 1;
+				patch -d$svndir/ -p0 < "$pdir/$p" |sed -e "s/^patching file/$G patching > $WH/g;s/^Hunk/$P Hunk     > $Y/g;s/FAILED/$R FAILED/g; ;s/-- saving/$Y -- saving/g;";
+			done;
+		else
+			echo -e $WH"    $txt_no patch $txt_found";
+		fi;
+	else
+		clear;
+		echo -e $C;
+		ologo;
+		echo -e $WH"    already patched";
+	fi;
+	echo -e $W;
+};
+_dialog_checkout(){
+	upc="$(mktemp)";
+	(echo -en " $txt_verify_syscheck ";
+	[ "$sanity" == "1" ] && echo -e "ok" && sleep 1;
+	if [ "${s3cfg_vars[NO_SVN_AUTOUPDATE]}" == "0" ];then
+		echo -en  " $txt_verify_svn ";
+		if [ -f "$svndir/config.sh" ];then
+			echo "ok";
+			sleep 1;
+			echo -en " $txt_update_svn $txt_wait\n";
+			cd "$svndir";
+			svn -q update;
+			echo 1 >"$upc";
+			sleep 1;
+		fi;
+	fi;) | "$gui" "$st_" "$bt_" "$title_" "$pb_" 5 52;
+	if [ "${s3cfg_vars[NO_SVN_AUTOUPDATE]}" == "0" ];then
+		upc1=$(cat "$upc" 2>/dev/null);
+		rm -f "$upc";
+		[ ! "$upc1" == "1" ] && _dialog_checkout1;
+		if [ -f "$svndir/config.sh" ];then
+			reset_="$("$svndir/config.sh" -R)";
+			_fix_config_h;
+		fi;
+		_get_config_menu;
+	fi;
+	if [ -n "$1" ];then
+		if [ -f "$tccfgdir/$1" ] && [ -f "$svndir/config.sh" ];then
+			source "$tccfgdir/$1";
+			if [ ! -f "$tcdir/$_toolchainname/bin/$_compiler""gcc" ];then
+				first="$1";
+				_toolchain_gui_install;
+			fi;
+			loadprofile="yes";
+			_toolchain_build_menu "$1";
+		else
+			_select_menu;
+		fi;
+	fi;
+	_select_menu;
+};
+_dialog_checkout1(){
+	rm -rf "$svndir" 2>/dev/null;
+	COUNT=0;
+	[ -z "$1" ] && rn=0 || rn="$1";
+	if [ "$rn" -ge "7000" ];then
+		_rev="-r $rn";
+		sc_text="Revision: $rn";
+	else
+		_rev='';
+		sc_text="$txt_latest";
+	fi;
+	(echo -en "$txt_prepare_svn $txt_wait";)| "$gui" "$st_" "$bt_" "$title_" "$pb_" 3 55;
+	nnn="$(svn info $_rev -R "$trunkurl" |grep "^URL: " |uniq |wc -l)";
+	"$gui" "$st_" "$bt_" "$title_" --title " -[ SVN Checkout $sc_text ]- " --gauge "  $txt_wait" 6 75 < <(while read line filename;do ((++i));PCT=$(( 100*i/(nnn+1) ));
+cat <<EOF
+XXX
+$PCT
+  $line
+XXX
+EOF
+done < <(svn co "$trunkurl" "$svndir" $_rev| sed "s@$svndir@@g"| awk '{print $2}';
+	cd "$svndir";
+	if [ -f "$svndir/config.sh" ];then
+		reset_="$("$svndir/config.sh" -R)";
+		echo "Revision: $(REVISION) done...";
+		_fix_config_h;
+		[ -f "$workdir/SVN-IS-PATCHED" ] && rm -f "$workdir/SVN-IS-PATCHED";
+		_get_config_menu;
+	fi;));
+};
+REVISION(){
+	[ -d "$svndir" ] && cd "$svndir" && svnversion -n . 2>/dev/null| sed 's/[^0-9]//g' || echo " nosvn ";
+};
diff --git a/support/functions/_sys_check b/support/functions/_sys_check
new file mode 100644
index 0000000..2a823ff
--- /dev/null
+++ b/support/functions/_sys_check
@@ -0,0 +1,122 @@
+#!/bin/bash
+
+prerequisites(){
+
+failed=0;
+missing="(not found)";
+[[ $1 ]] && output=": &&" || output="echo";
+
+$output -e "$w_l\n  CHECK for binaries\n  ==================\n";
+
+# check for a forgotten and unusable 'upx' and remove this crap
+[ -x "$bindir"/upx ] && "$bindir"/upx -V &>/dev/null || rm -f "$bindir"/upx &>/dev/null;
+
+for e in "${binvars[@]}";
+do
+	if hash "$e" 2>/dev/null; then
+		$output -e "$w_l  have\t$g_l$e\t\t$y_l$(which "$e")";
+	else
+		failed=1;
+		$output -e "$r_l  need\t$w_l$e\t\t$r_l$missing";
+	fi;
+done;
+
+if hash upx 2>/dev/null; then
+	upxversion=($(upx -V | awk 'NR==1 { verok=$2>=3.91; printf "%.2f %i", $2, verok }'));
+	$output -n -e "$w_l  version$g_l upx$y_l ${upxversion[0]}";
+	if [ ${upxversion[1]} == 1 ]; then
+		$output -e "$g_l ok";
+	else
+		$output -e "$r_l nok";
+		failed=1;
+	fi
+fi
+
+$output -e " \n $w_l CHECK for headers\n  =================\n" ;
+
+for e in "${headervars[@]}";
+do
+	e1=$(find /usr/include/* | grep -m1 "$e");
+	if [ ${#e1} -gt 8 ]; then
+		$output -e "$w_l  have\t$g_l$e$w_l$y_l\t$e1"
+	else
+		failed=1;
+		$output -e "$r_l  need\t$w_l$e\t\t$r_l$missing";
+	fi;
+done;
+
+$output -e " \n $w_l CHECK for libraries\n  ===================\n" ;
+
+for e in "${libvars[@]}";
+do
+	e1=$(find /usr/lib* 2>/dev/null | grep -m1 "$e");
+	if [ ${#e1} -gt 8 ]; then
+		$output -e "$w_l  have\t$g_l$e$w_l$y_l\t$e1"
+	else
+		failed=1;
+		$output -e "$r_l  need\t$w_l$e\t\t$r_l$missing";
+	fi;
+done;
+
+if [ "$(uname -m)" == "x86_64" ]; then
+	$output -e " \n $w_l CHECK for zlib32\n  ================\n" ;
+	e="zlib32";
+	e1="/usr/lib/libz.so";
+	e2="/usr/lib32/libz.so.1";
+	if [ -f $e1 ]; then
+		$output -e "$w_l  have\t$g_l$e$w_l$y_l\t$e1"
+	elif [ -f $e2 ]; then
+		$output -e "$w_l  have\t$g_l$e$w_l$y_l\t$e2"
+	else
+		failed=1;
+		$output -e "$r_l  need\t$w_l$e\t\t$r_l$missing";
+	fi
+fi
+
+return $failed;
+}
+
+# Parameters (all optional):
+#   $1: installer name (or "auto")
+#   $2: add architecture (not implemented yet)
+#
+# Example:
+#   syscheck debian_os
+#     call installer 'debian_os' (Do not care about the actual Linux distribution.)
+syscheck(){
+[[ $1 ]] && [ "$1" != "auto" ] && override="$1";
+
+if [ -d "$osdir" ];then cd "$osdir";x=(*); for i in "${x[@]}";do source "$i"; done fi
+
+binvars=( dialog grep gawk wget tar bzip2 svn xz upx patch gcc make scp sshpass openssl dos2unix );
+headervars=( crypto.h libusb.h pcsclite.h pthread.h );
+libvars=( libccidtwin.so );
+
+sanity=1;
+
+if ! prerequisites silent; then
+	echo -e "$w_l"; clear; ologo;
+	prerequisites;
+	sanity=0;
+	installer="unknown";
+	# Debian and Ubuntu
+	[ -f /etc/debian_version ] && installer="debian_os";
+	# CentOS and Redhat
+	[ -f /etc/redhat-release ] && installer="redhat_os";
+	# Manjaro (/etc/os-release)
+	[ -f /etc/manjaro-release ] && installer="manjaro_os";
+	# SuSE (/etc/SuSE-release is depreciated -> check for YaST2)
+	[ -d /etc/YaST2 ] && installer="suse_os";
+	# Optional override via parameter
+	[[ $override ]] && installer=$override;
+	echo -e "\n$w_l  Selected installer: $installer";
+	if type -t "$installer" >/dev/null; then
+		$installer && prerequisites && sanity=1;
+	else
+		echo -e "\n$r_l  Needs manual installation.";
+	fi
+	echo -e "$re_";
+fi
+
+return $sanity;
+}
diff --git a/support/functions/_toolchain b/support/functions/_toolchain
new file mode 100644
index 0000000..35dea12
--- /dev/null
+++ b/support/functions/_toolchain
@@ -0,0 +1,285 @@
+#!/bin/bash
+
+_toolchain_build_menu(){
+	[ "$loadprofile" == "yes" ] && load_config;
+	selected=$(
+	"$gui" "$st_" "$bt_" "$title_" --no-cancel --title " -[ $txt_bmenu_title ]- " --menu "_________________________________________________________ \n $txt_bmenu_user = $(whoami)\n Toolchain       = $_toolchainname\n $txt_bmenu_comp = $_compiler""gcc\n $txt_bmenu_debu = CPU-Threads($(CPUS)) SVN($(REVISION)) SCRIPT($SIMPLEVERSION)\n $txt_bmenu_use  = $(echo $USESTRING| sed -e 's/^[ \t]*//')\n _________________________________________________________ \n" 22 65 10 BUILD "$txt_bmenu_build" CONFIGURE "$txt_bmenu_config" LOAD_PROFILE "$txt_bmenu_profile" SAVE_PROFILE "$txt_bmenus_profile" SHOW_BUILDLOG "$txt_bmenu_log" EDIT_CONF_DIR "Oscam config PATH" BACK "$txt_bmenu_back" EXIT "$txt_firstmenu_exit");
+	[ $? = 255 ] && _toolchain_build_menu;
+	case $selected in
+		BUILD)
+						_gui_build;;
+		CONFIGURE)
+						_toolchain_config_menu;;
+		EDIT_CONF_DIR)
+						_gtedit;
+						_toolchain_build_menu;;
+		SHOW_BUILDLOG)
+						_sz;
+						if [ -f "$workdir/lastbuild.log" ];then
+							"$gui" "$st_" "$bt_" "$title_" --textbox "$workdir/lastbuild.log" "$_lines" "$_cols";
+						fi;
+						_toolchain_build_menu;;
+		LOAD_PROFILE)
+						_load_profile;;
+		SAVE_PROFILE)
+						_save_profile;;
+		BACK)
+						_toolchain_main_menu;;
+		EXIT)
+						bye;
+						exit;;
+	esac;
+	_toolchain_build_menu;
+};
+_toolchain_config_menu(){
+	[ "$loadprofile" == "yes" ] && load_config;
+	selected=$(
+	"$gui" "$st_" "$bt_" "$title_" --no-cancel --title " -[ $txt_config_menu ]- " --menu " ADDONS :\n $(e_addons)\n\n PROTOCOLS :\n $(e_protocols)\n\n READERS :\n $(e_readers)\n\n CARD_READERS :\n $(e_card_readers)\n\n USE VARIABLES :\n $(echo $USESTRING| sed -e 's/^[ \t]*//')\n\n" 29 75 6 BACK "$txt_back_build" OSCAM_MODULE "$txt_module_configure" OSCAM_EXTRA "$txt_oscam_extra" BUILD_EXTRA "$txt_build_extra" SELECT_STAPI "select stapi" RESET "$txt_build_reset");
+	[ $? = 255 ] && _toolchain_config_menu;
+	case $selected in
+		BACK)
+						save_config;
+						_toolchain_build_menu;;
+		OSCAM_EXTRA)
+						_oscam_extra_menu;;
+		BUILD_EXTRA)
+						_build_extra_menu;;
+		OSCAM_MODULE)
+						eval "$svndir/config.sh -g" 2>/dev/null;
+						save_config;;
+		SELECT_STAPI)
+						_stapi_select;;
+		RESET)
+						_reset_config;
+						load_config;
+						_toolchain_config_menu;;
+	esac;
+	_toolchain_config_menu;
+};
+_toolchain_main_menu(){
+	_fill_tc_array;
+	IFS="#";
+	COUNT=0;
+	MENU_OPTIONS="BACK#$txt_back_main#";
+	counter;
+	if [ "$systype" == "ok" ];then
+		MENU_OPTIONS+="ADD#$txt_menu_builder2#";
+		counter;
+		[ "$tcempty" == "0" ] && MENU_OPTIONS+="REMOVE#$txt_menu_builder3#" && counter;
+	fi;
+	MENU_OPTIONS+="native#$txt_menu_builder4 $(hostname)-$(uname -m)#";
+	counter;
+	if [ "$systype" == "ok" ];then
+		if [ "$tcempty" == "0" ];then
+			for i in "${INST_TCLIST[@]}";do
+				if [ ! "$i" == "native" ];then
+					source "$tccfgdir/$i";
+					MENU_OPTIONS+="$_toolchainname#$_description#";
+					counter;
+				fi;
+			done;
+		fi;
+	fi;
+	MENU_OPTIONS+="EXIT#$txt_firstmenu_exit#";
+	counter;
+	out=$(
+	"$gui" "$st_" "$nc_" "$bt_" "$title_" --help-button --help-label INFO --title "-[ Toolchain $txt_menu ]-" --menu "$txt_main_revision$(REVISION)" "${COUNT+8}" 75 0 ${MENU_OPTIONS});
+	IFS=$OIFS;
+	first=$(echo "$out" | awk '{printf $1}');
+	tc_info=$(echo "$out" | awk '{printf $2}';);
+	case $first in
+		EXIT)
+					bye;;
+		BACK)
+					_select_menu;;
+		ADD)
+					_toolchain_add_menu;;
+		REMOVE)
+					_toolchain_remove_menu;;
+		HELP)
+					if [ -f "$tccfgdir/$tc_info" ];then
+						source "$tccfgdir/$tc_info";
+						"$gui" "$st_" "$nc_" "$bt_" "$title_" "$ib_" "$_tc_info" $((_tc_infolines + 5)) 65;
+						sleep 5;
+					fi;
+					_toolchain_main_menu;;
+		*)
+					[ -f "$tccfgdir/$first" ] && stapi_allowed="" && source "$tccfgdir/$first" || exit;
+					loadprofile="yes";
+					_toolchain_build_menu "$first";;
+		esac;
+};
+get_toolchain_config(){
+	get_toolchain_list;
+	for ((i=0;i<${#toolchain_list[@]};i++));do
+		[ "${toolchain_list[$i]}" == "$1" ] && source "$sdir/toolchain.cfgs/$1";
+	done;
+};
+_load_toolchain(){
+	[ ! -z "$1" ] && source "$tccfgdir/$1";
+	dln="$(decode "$_t1e")$(decode "$_toolchainfilename")";
+	tc_dl="$dldir/$dln";
+	[ -f "$dln" ] && rm -rf "$dln";
+	clear;
+	echo -e "$c_l";
+	ologo;
+	_nl;
+	echo -e  "$p_l  load only";
+	_nl;
+	echo -e  "$w_l  Toolchain   :$y_l $dln";
+	echo -en "$w_l  download    :$g_l ";
+	_pget;
+};
+get_toolchain_list(){
+	[ -d "$sdir/toolchain.cfgs" ] && cd "$sdir/toolchain.cfgs" || echo "please fix $sdir/toolchain.cfgs";
+	toolchain_list=();
+	toolchain_list+=('native');
+	toolchain_list+=(*);
+	cd "$workdir";
+};
+_console_extract_toolchain(){
+	[ -d "$tcdir/$_toolchainname" ] && rm -rf "$tcdir/$_toolchainname";
+	mkdir "$tcdir/$_toolchainname";
+	cd "$tcdir/$_toolchainname";
+	xz -d "$tc_dl" -c | tar -x;
+	echo -en "$txt_done!$w_l";
+};
+_toolchain_check(){
+	clear;
+	echo -e "$w_l";
+	ologo;
+	headervars=( crypto.h pcsclite.h libusb.h pthread.h );
+	[ -f "$tccfgdir/$1" ] && source "$tccfgdir/$1";
+	if [ -d "$tcdir/$1/bin" ];then
+		cd "$tcdir/$1/bin";
+	else
+		echo -e "$r_l  $txt_error:$y_l $1$w_l Toolchain $txt_n_installed""$rs_";
+		_nl;
+		exit;
+	fi;
+	compilername="$_compiler""gcc";
+	[ ${#_realcompiler} -gt 4 ] && compilername="$_realcompiler";
+	version=$("./$compilername" -dumpversion);
+	machine=$("./$compilername" -dumpmachine);
+	sr=$("./$compilername" -print-sysroot 2>/dev/null);
+	sysroot=${tcdir//"$1/bin"/};
+	[ -z "$sysroot" ] && sysroot="$r_l$txt_too_old";
+	echo -e "$w_l  Compiler Info\n  =============\n";
+	echo -e "$w_l  Version :$y_l $version";
+	echo -e "$w_l  Target  :$y_l $machine";
+	echo -e "$w_l  Sysroot :$y_l $sysroot";
+	for e in "${headervars[@]}";do
+		temp=$(find "$sr"/* |grep -m1 "$e");
+		[ ${#temp} -gt 8 ] && echo -e "$w_l  Header  :$y_l $e$g_l\t$txt_found" || echo -e "$w_l  Header  :$y_l $e$r_l\t($txt_not_found)";
+	done;
+	_nl;
+	exit;
+};
+_toolchain_repair(){
+	clear;
+	echo -e "$w_l\n";
+	s3logo;
+	cd $dldir;zzusatz=0;szusatz=0;
+	[ -f "$tccfgdir/$1" ] && source "$tccfgdir/$1";
+	fn=$(echo $_md5sum |awk '{ printf $2 }');
+	if [ -f $fn ];then
+		md5file=$(mktemp);
+		echo $_md5sum > $md5file;
+		answer=$(md5sum -c $md5file 2>&1);
+		if [ "$answer" == "$fn: OK" ];then
+			echo -en $w_l"  Toolchain md5 check :$g_l";
+			echo -en $answer |awk '{{print " " $2;}}';
+			echo -en $w_l;tc_dl="$dldir/$fn";
+			echo -en $w_l"  Toolchain repair    :$g_l"
+			_console_extract_toolchain;
+			echo -e "\n"$W;
+		else
+			echo -en $w_l"\n  Toolchain md5 check :$r_l";
+			echo -en $answer |awk '{{print " " $2;}}' |head -1;
+			echo -en $W;sleep 1;zzusatz=0;szusatz=8;
+			echo -en $w_l"  Toolchain download  :$g_l";
+			dln=$fn;_pget; sleep 1;
+			echo -en $w_l"  Toolchain repair    :$g_l";
+			_console_extract_toolchain;echo -e $W"\n";
+			exit;
+		fi
+	else
+		echo -e  $w_l"  Toolchain Filename :$y_l $fn";
+		echo -en $w_l"  Toolchain download :$g_l ";
+		zzusatz=-1;szusatz=7;
+		dln=$fn;_pget; sleep 1;
+		echo -en $w_l"  Toolchain repair   :$g_l";
+		_console_extract_toolchain;echo -e $W"\n";
+		exit;
+	fi
+};
+_toolchain_add_menu(){
+	_fill_tc_array;
+	_init_menu;
+	for i in "${MISS_TCLIST[@]}";do
+		if [ ! "$i" == "native" ];then
+			source "$tccfgdir/$i";
+			MENU_OPTIONS+="$_toolchainname#$_description#";
+			counter;
+		fi;
+	done;
+	MENU_OPTIONS+="EXIT#$txt_menu_builder1#";
+	counter;
+	out=$(
+	"$gui" "$st_" "$nc_" "$bt_" "$title_" --help-button --help-label INFO --title "-[ $txt_add_menu ]-" --menu "$txt_main_revision$(REVISION)" "${COUNT+8}" 75 0 ${MENU_OPTIONS[@]});
+	IFS=$OIFS;
+	first=$(echo "$out" | awk '{printf $1}');
+	case $first in
+		EXIT)
+				bye;;
+		BACK)
+				_toolchain_main_menu;;
+		*)
+				_toolchain_gui_install;
+				_toolchain_main_menu;;
+	esac;
+};
+_toolchain_remove_menu(){
+	_fill_tc_array;
+	_init_menu;
+	if [ "$tcempty" == "0" ];then
+		for i in "${INST_TCLIST[@]}";do
+			if [ ! "$i" == "native" ];then
+				source "$tccfgdir/$i";
+				MENU_OPTIONS+="$_toolchainname#$_description#";
+				counter;
+			fi;
+		done;
+	fi;
+	MENU_OPTIONS+="EXIT#$txt_menu_builder1#";
+	counter;
+	out=$(
+	"$gui" "$st_" "$nc_" "$bt_" "$title_" --title "-[ $txt_remove_menu ]-" --menu "$txt_main_revision$(REVISION)" "${COUNT+8}" 75 0 ${MENU_OPTIONS});
+	IFS=$OIFS;
+	first=$(echo "$out" | awk '{printf $1}');
+	case $first in
+		EXIT)
+				bye;;
+		BACK)
+				_toolchain_main_menu;;
+		*)
+				[ -d "$tcdir/$first" ] && rm -rf "$tcdir/$first";
+				_toolchain_main_menu;;
+	esac;
+};
+_toolchain_gui_install(){
+	[ -d "$tcdir/$first" ] && rm -rf "$tcdir/$first" && echo "$txt_delete $tcdir/$first";
+	mkdir "$tcdir/$first";
+	cd "$tcdir/$first";
+	source "$tccfgdir/$first";
+	tcname="$(decode "$_t1e$_toolchainfilename")";
+	stcname="$(decode "$_toolchainfilename")";
+	if [ -f "$dldir/$tcname" ];then
+		(xz -d "$dldir/$tcname" -c| tar -xv) |"$gui" "$st_" --title " -[ $txt_extracting ]- " "$pb_" 20 74;
+	else
+		cd "$dldir";
+		wget "$(decode "$_u1e")/$tcname" 2>&1 | stdbuf -o0 awk '/[.] +[0-9][0-9]?[0-9]?%/ { print substr($0,63,3) }' | "$gui" "$st_" "$bt_" "$title_" --title " -[ download ]- " --gauge "  $txt_loading $stcname $txt_wait" 6 74;
+		cd "$tcdir/$first";
+		(xz -d "$dldir/$tcname" -c |tar -xv) |"$gui" "$st_" --title " -[ $txt_extracting ]- " "$pb_" 20 74;
+	fi;
+};
\ No newline at end of file
diff --git a/support/functions/_translation b/support/functions/_translation
new file mode 100644
index 0000000..b36a7dc
--- /dev/null
+++ b/support/functions/_translation
@@ -0,0 +1,51 @@
+#!/bin/bash
+
+auto_langset(){
+	langset="fail";
+	cd "$tdir";
+	langsupport=(*);
+	if [ -f "$configdir/force_lang" ];then
+		lng1=$(head -n 1 "$configdir/force_lang");
+		for lng in "${langsupport[@]}";do
+			if [ "$lng" == "$lng1" ];then
+				source "$tdir/$lng";
+				langset="ok";
+				return;
+			fi;
+		done;
+	fi;
+	for lng in "${langsupport[@]}";do
+		if [ "${LANG:0:2}" == "$lng" ];then
+			source "$tdir/$lng";
+			langset="ok";
+			return;
+		fi;
+	done;
+	if [ ! "$langset" == "ok" ];then
+		[ -f "$tdir/en" ] && source "$tdir/en";
+	fi;
+};
+lang_select(){
+	lng="none";
+	[ -f "$configdir/force_lang" ] && lng=$(head -n 1 "$configdir/force_lang");
+	unset MENU_OPTIONS;COUNT=0;
+	for e in "${langsupport[@]}";do
+		if [ "$lng" == "none" ];then
+			[ "${LANG:0:2}" == "$e" ] && _stat="on" || _stat="off";
+		else
+			[ "$lng" == "$e" ] && _stat="on" || _stat="off";
+		fi;
+		txt=$(head -3 "$tdir/$e" |tail -1);
+		MENU_OPTIONS+=($e $txt $_stat);counter;
+	done;
+	lng=$("$gui" "$st_" "$bt_" "$title_" --title "-[ lang set ...to edit... ]-" "$rl_" "...langset...to...edit..." "${COUNT+7}" 40 0 "${MENU_OPTIONS[@]}");
+	if [ ! "${LANG:0:2}" == "$lng" ];then
+		for lng1 in "${langsupport[@]}";do
+			if [ "$lng" == "$lng1" ];then
+				echo "$lng" >"$configdir/force_lang";
+			fi;
+		done;
+	else
+		[ -f "$configdir/force_lang" ] && rm -rf "$configdir/force_lang";
+	fi;
+};
\ No newline at end of file
diff --git a/support/functions/_uploadcam b/support/functions/_uploadcam
new file mode 100644
index 0000000..8f02ef6
--- /dev/null
+++ b/support/functions/_uploadcam
@@ -0,0 +1,55 @@
+#!/bin/bash
+
+upload_cam(){
+	clear;
+	slogo;
+	FILENAME=$1;
+
+	if [ ! -f "$profdir/$FILENAME" ];then
+		echo -e "$r_l\n  $txt_error $FILENAME $txt_upload_cam1 $re_";
+		exit;
+	else
+		echo -e "$w_l\n  CONFIG  : $g_l$FILENAME $txt_upload_cam2 $re_";
+	fi;
+
+#load data from config
+	source "$profdir/$FILENAME";
+
+#find newest build by date for toolchain
+	cd "$bdir";
+	buildcamname="$(find . -type f \( -iname "*$toolchain*" ! -iname "*list_smargo" \) -printf '%T@ %p\n' | sort -n | tail -1 | cut -f2- -d" " |sed 's@./@@g')";
+	cd "$workdir";
+
+#output date from cam
+	if [ -f "$bdir/$buildcamname" ];then
+		echo -e "$w_l  CAMNAME : $y_l$buildcamname";
+		echo -en "$w_l  FILEDATE: "$(
+						stat -c %y "$bdir/$buildcamname" |awk '{print $1" "; printf substr($2,1,8)}');
+		echo -e "$w_l";
+	else
+		echo -e "$r_l\n  matching \$CAM not found in $bdir$re_";
+		exit;
+	fi;
+	echo -e "$p_l\n  $txt_LOAD  > $w_l$txt_to IP:$b_l$ip$w_l port:$b_l$port";
+	sshpass -p "$password" scp -P "$port" "$bdir/$buildcamname" "$loginname@$ip":/tmp;
+
+#replace target cam
+	if [ "$replace_target" == "y" ];then
+		echo -en "$p_l  REPLACE > $y_l$targetcam$re_";
+		sshpass -p "$password" ssh -p "$port" -o StrictHostKeyChecking=no "$loginname@$ip" \
+		"cd /tmp;if [ -f \"$buildcamname\" ];then if [ -f \"$targetcam\" ];then mv -f \"$buildcamname\" \"$targetcam\";fi;fi;exit;";
+		echo -e "$g_l$txt_done!$re_";
+	fi;
+
+#stop target cam
+	if [ "$stop_target" == 'y' ];then
+		stop="killall -9 $(basename "$targetcam")";
+	fi;
+
+#remote command (example restart cam)
+	if [ ! "$remote_command" == "none" ];then
+		echo -e "$w_l  SSH COMMANDS $remote_command $y_l$txt_wait";
+		# do remote commands
+		sshpass -p "$password" ssh -p "$port" -o StrictHostKeyChecking=no "$loginname@$ip" "$remote_command;";
+	fi;
+};
\ No newline at end of file
diff --git a/support/os/debian_ubuntu.install b/support/os/debian_ubuntu.install
new file mode 100644
index 0000000..61db87b
--- /dev/null
+++ b/support/os/debian_ubuntu.install
@@ -0,0 +1,137 @@
+#!/bin/bash
+
+debian_os(){
+install_log="$ldir/os-install.log";
+failed=0;
+prefix="sudo";
+packages="";
+
+echo -n >"$install_log" &2>/dev/null;
+
+echo -e "$w_l\n  INSTALLATION\n  ============\n";
+
+debian_version=$(sed -n 's/^[^0-9]*\([0-9][0-9]*\).*$/\1/p' /etc/debian_version 2>/dev/null);
+
+if [[ $debian_version ]]; then
+	[ "$debian_version" -lt 7 ] && { echo -e "$r_l  This system is not supported anymore!\n"; return 1; }
+	[ "$debian_version" -gt 8 ] && echo -e "$r_l  This installer is still in the testing stage!";
+else
+	# all known Ubuntu systems have 'lsb_release'
+	! hash lsb_release 2>/dev/null && { echo -e "$r_l  System not recognised -> Abort!\n"; return 1; }
+	ubuntu_version=$(lsb_release -rs | cut -f 1 -d '.');
+	[ "$ubuntu_version" -lt 12 ] && { echo -e "$r_l  This system is not supported anymore!\n"; return 1; }
+	[ "$ubuntu_version" -gt 16 ] && echo -e "$r_l  This installer is still in the testing stage!";
+fi
+
+# without sudo no user installation allowed
+hash sudo 2>/dev/null || { [ "$(whoami)" != "root" ] && { echo -e "$r_l  You need to be root for that!\n"; return 1; } }
+
+# root needs no sudo
+[ "$(whoami)" == "root" ] && prefix="";
+
+for e in "${binvars[@]}";
+do
+	if ! hash "$e" 2>/dev/null; then
+		inst="$e";
+		case $e in
+		svn)
+			inst="subversion";
+			;;
+		xz)
+			inst="xz-utils";
+			;;
+		esac;
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi;
+done;
+
+for e in "${headervars[@]}";
+do
+	e1=$(find /usr/include/* |grep -m1 "$e");
+	if [ ! ${#e1} -gt 8 ]; then
+		case $e in
+		crypto.h)
+				inst="libssl-dev";
+			;;
+		libusb.h)
+				inst="libusb-1.0.0-dev";
+			;;
+		pcsclite.h)
+				inst="libpcsclite-dev";
+			;;
+		pthread.h)
+				inst="libc-dev-bin";
+			;;
+		esac;
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi;
+done;
+
+for e in "${libvars[@]}";
+do
+	e1=$(find /usr/lib* |grep -m1 "$e");
+	if [ ! ${#e1} -gt 8 ]; then
+		case $e in
+		libccidtwin.so)
+				inst="libccid";
+			;;
+		esac;
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi;
+done;
+
+if [ "$(uname -m)" == "x86_64" ] && [ ! -f /usr/lib32/libz.so.1 ]; then
+	if [ ! -f /usr/lib32/libz.so.1 ]; then
+		e="zlib32";
+		inst="lib32z1";
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi
+fi
+
+if [ ${#packages} -gt 0 ]; then
+	echo -n -e "$w_l  update$g_l package list...";
+	echo "+++ $(date): apt-get -y update" >> "$install_log"
+	$prefix apt-get -y update >> "$install_log" 2>&1;
+	echo -e "$y_l done";
+	echo -n -e "$w_l  install$g_l selected packages$y_l please wait...";
+	echo "+++ $(date): apt-get -y install$packages" >> "$install_log"
+	$prefix apt-get -y install $packages >> "$install_log" 2>&1 || failed=1;
+	if [ $failed == 0 ]; then
+		echo -e "$y_l  done";
+	else
+		echo -e "$r_l  failed!";
+	fi
+fi
+
+if hash upx 2>/dev/null; then
+	upxversion=($(upx -V | awk 'NR==1 { verok=$2>=3.91; printf "%.2f %i", $2, verok }'));
+	if [ ${upxversion[1]} == 0 ]; then
+		[ -f "$bindir/upx" ] && rm -f "$bindir/upx" &>/dev/null;
+		if [ "$(uname -m)" == "x86_64" ]; then
+			upxarch="upx-3.95-amd64_linux";
+		else
+			upxarch="upx-3.95-i386_linux";
+		fi
+		upxarchive=$upxarch".tar.bz2";
+		[ -f "$dldir/$upxarchive" ] && rm -f "$dldir/$upxarchive" &>/dev/null;
+		upxurl="http://upx.sourceforge.net/download/$upxarchive";
+		echo -e "$w_l  get newer$g_l upx$y_l\tfrom: $upxurl";
+		echo "+++ $(date): wget $upxurl" >> "$install_log";
+		if wget --directory-prefix="$dldir" --append-output="$install_log" $upxurl; then
+			echo "+++ $(date): tar xjvf $upxarchive" >> "$install_log";
+			tar xjvf "$dldir"/$upxarchive --directory="$bindir" $upxarch/upx --strip-components=1 >> "$install_log" 2>&1 || failed=1;
+			[ -f "$dldir"/$upxarchive ] && rm -f "$dldir"/$upxarchive &>/dev/null;
+		else
+			failed=1;
+		fi
+	fi
+fi
+
+[ $failed == 1 ] && echo -e "\n$r_l  Installation with errors - see: $install_log";
+
+return $failed;
+}
diff --git a/support/os/manjaro.install b/support/os/manjaro.install
new file mode 100644
index 0000000..01e49d4
--- /dev/null
+++ b/support/os/manjaro.install
@@ -0,0 +1,126 @@
+#!/bin/bash
+
+manjaro_os(){
+install_log="$ldir/os-install.log";
+failed=0;
+prefix="sudo";
+packages="";
+
+echo -n >"$install_log" &2>/dev/null;
+echo -e "$w_l\n  INSTALLATION\n  ============\n";
+
+source /etc/lsb-release
+manjaro_version=$DISTRIB_RELEASE
+
+# without sudo no user installation allowed
+hash sudo 2>/dev/null || { [ "$(whoami)" != "root" ] && { echo -e "$r_l  You need to be root for that!\n"; return 1; } }
+
+# root needs no sudo
+[ "$(whoami)" == "root" ] && prefix="";
+
+for e in "${binvars[@]}";
+do
+	if ! hash "$e" 2>/dev/null; then
+		inst="$e";
+		case $e in
+		svn)
+			inst="subversion";
+			;;
+		xz)
+			inst="xz-utils";
+			;;
+		esac;
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi;
+done;
+
+for e in "${headervars[@]}";
+do
+	e1=$(find /usr/include/* |grep -m1 "$e");
+	if [ ! ${#e1} -gt 8 ]; then
+		case $e in
+		crypto.h)
+				inst="libssl-dev";
+			;;
+		libusb.h)
+				inst="libusb-1.0.0-dev";
+			;;
+		pcsclite.h)
+				inst="pcsclite";
+			;;
+		pthread.h)
+				inst="libc-dev-bin";
+			;;
+		esac;
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi;
+done;
+
+for e in "${libvars[@]}";
+do
+	e1=$(find /usr/lib* |grep -m1 "$e");
+	if [ ! ${#e1} -gt 8 ]; then
+		case $e in
+		libccidtwin.so)
+				inst="ccid";
+			;;
+		esac;
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi;
+done;
+
+if [ "$(uname -m)" == "x86_64" ] && [ ! -f /usr/lib32/libz.so.1 ]; then
+	if [ ! -f /usr/lib32/libz.so.1 ]; then
+		e="zlib32";
+		inst="lib32z1";
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi
+fi
+
+if [ ${#packages} -gt 0 ]; then
+	echo -n -e "$w_l  update$g_l package list...";
+	echo "+++ $(date): pacman -Syu" >> "$install_log"
+	$prefix pacman -Syu >> "$install_log" 2>&1;
+	echo -e "$y_l done";
+	echo -n -e "$w_l  install$g_l selected packages$y_l please wait...";
+	echo "+++ $(date): pacman -Sy install$packages" >> "$install_log"
+	$prefix pacman -S --noconfirm $packages >> "$install_log" 2>&1 || failed=1;
+	if [ $failed == 0 ]; then
+		echo -e "$y_l  done";
+	else
+		echo -e "$r_l  failed!";
+	fi
+fi
+
+if hash upx 2>/dev/null; then
+	upxversion=($(upx -V | awk 'NR==1 { verok=$2>=3.91; printf "%.2f %i", $2, verok }'));
+	if [ ${upxversion[1]} == 0 ]; then
+		[ -f "$bindir/upx" ] && rm -f "$bindir/upx" &>/dev/null;
+		if [ "$(uname -m)" == "x86_64" ]; then
+			upxarch="upx-3.95-amd64_linux";
+		else
+			upxarch="upx-3.95-i386_linux";
+		fi
+		upxarchive=$upxarch".tar.bz2";
+		[ -f "$dldir/$upxarchive" ] && rm -f "$dldir/$upxarchive" &>/dev/null;
+		upxurl="http://upx.sourceforge.net/download/$upxarchive";
+		echo -e "$w_l  get newer$g_l upx$y_l\tfrom: $upxurl";
+		echo "+++ $(date): wget $upxurl" >> "$install_log";
+		if wget --directory-prefix="$dldir" --append-output="$install_log" $upxurl; then
+			echo "+++ $(date): tar xjvf $upxarchive" >> "$install_log";
+			tar xjvf "$dldir"/$upxarchive --directory="$bindir" $upxarch/upx --strip-components=1 >> "$install_log" 2>&1 || failed=1;
+			[ -f "$dldir"/$upxarchive ] && rm -f "$dldir"/$upxarchive &>/dev/null;
+		else
+			failed=1;
+		fi
+	fi
+fi
+
+[ $failed == 1 ] && echo -e "\n$r_l  Installation with errors - see: $install_log";
+
+return $failed;
+}
diff --git a/support/os/redhat_centos_fedora.install b/support/os/redhat_centos_fedora.install
new file mode 100644
index 0000000..b0cee2b
--- /dev/null
+++ b/support/os/redhat_centos_fedora.install
@@ -0,0 +1,182 @@
+#!/bin/bash
+
+redhat_os(){
+install_log="$ldir/os-install.log";
+failed=0;
+prefix="sudo";
+packages="";
+
+echo -n >"$install_log" &2>/dev/null;
+
+echo -e "$w_l\n  INSTALLATION\n  ============\n";
+
+rh_version=$(sed -n 's/^[^0-9]*\([0-9][0-9]*\).*$/\1/p' /etc/redhat-release 2>/dev/null);
+! [[ $rh_version ]] && { echo -e "$r_l  System not recognised -> Abort!\n"; return 1; }
+
+sshpass_src="ftp://rpmfind.net/linux/dag/redhat/el6/en/x86_64/dag/RPMS/sshpass-1.05-1.el6.rf.x86_64.rpm";
+sshpass86_src="ftp://rpmfind.net/linux/dag/redhat/el6/en/i386/dag/RPMS/sshpass-1.05-1.el6.rf.i686.rpm";
+installer="yum";
+
+case $rh_version in
+	5)
+		echo -e "$r_l  Five - Has a too old glibc!"; return 1;
+		sshpass_src="ftp://rpmfind.net/linux/epel/5/x86_64/sshpass-1.05-1.el5.x86_64.rpm";
+		sshpass86_src="ftp://rpmfind.net/linux/epel/5/i386/sshpass-1.05-1.el5.i386.rpm";
+		;;
+	[6-7])
+		# Redhat/CentOS 6+7 ok
+		;;
+	2[2-3])
+		# Fedora 22+23 ok
+		installer="dnf";
+		;;
+	24)
+		# Fedora 24 still beta
+		installer="dnf";
+		echo -e "$r_l  This installer is still in the testing stage!";
+		;;
+	*)
+		echo "This version is not supported!" >"$install_log" 2>/dev/null;
+		echo -e "$r_l  \"$(cat /etc/redhat-release)\" is not supported!";
+		return 1;
+esac
+
+# without sudo no user installation allowed
+hash sudo 2>/dev/null || { [ "$(whoami)" != "root" ] && { echo -e "$r_l  You need to be root for that!\n"; return 1; } }
+
+# root needs no sudo
+[ "$(whoami)" == "root" ] && prefix="";
+
+# care about the repos on Redhat
+if hash subscription-manager 2>/dev/null; then
+	$prefix subscription-manager status >/dev/null || { echo -e "$r_l  You need an active subscription!\n"; return 1; }
+	echo -e "$w_l  Retreiving repo list...";
+	if ! $prefix subscription-manager repos --list-enabled | grep -q "server-optional-rpms"; then
+		cmdline="subscription-manager repos --enable=rhel-$rh_version-server-optional-rpms";
+		echo -e "$w_l  Add needed repo$g_l optional:$y_l $cmdline";
+		echo "+++ $(date): $cmdline" >> "$install_log";
+		$prefix $cmdline >> "$install_log" 2>&1 || failed=1;
+	fi
+fi
+
+for e in "${binvars[@]}";
+do
+	if ! hash "$e" 2>/dev/null; then
+		inst="$e";
+		case $e in
+		svn)
+			inst="subversion";
+			;;
+		# the following guys have no official packages
+		sshpass)
+			continue;
+			;;
+		upx)
+			continue;
+			;;
+		esac;
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi;
+done;
+
+for e in "${headervars[@]}";
+do
+	e1=$(find /usr/include/* |grep -m1 "$e");
+	if [ ! ${#e1} -gt 8 ]; then
+		case $e in
+		crypto.h)
+				inst="openssl-devel";
+			;;
+		libusb.h)
+				# no official package for older versions
+				[ "$rh_version" -lt 6 ] && continue;
+				# hopelully they stick to it from now :-)
+				inst="libusbx-devel";
+				[ "$rh_version" == 6 ] && inst="libusb1-devel";
+			;;
+		pcsclite.h)
+				inst="pcsc-lite-devel";
+			;;
+		pthread.h)
+				inst="glibc-headers";
+			;;
+		esac;
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi;
+done;
+
+for e in "${libvars[@]}";
+do
+	e1=$(find /usr/lib* 2>/dev/null | grep -m1 "$e");
+	if [ ! ${#e1} -gt 8 ]; then
+		case $e in
+		libccidtwin.so)
+				inst="ccid";
+				[ "$rh_version" -gt 6 ] && inst="pcsc-lite-ccid";
+			;;
+		esac;
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi;
+done;
+
+if [ "$(uname -m)" == "x86_64" ] && [ ! -f /usr/lib/libz.so ]; then
+	if [ ! -f /usr/lib/libz.so ]; then
+		e="zlib32";
+		inst="zlib-devel.i686";
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi
+fi
+
+if [ ${#packages} -gt 0 ]; then
+	echo -n -e "$w_l  update$g_l package list...";
+	echo "+++ $(date): $installer -y check-update" >> "$install_log"
+	$prefix $installer -y check-update >> "$install_log" 2>&1;
+	echo -e "$y_l done";
+	echo -n -e "$w_l  install$g_l selected packages$y_l please wait...";
+	echo "+++ $(date): $installer -y install$packages" >> "$install_log"
+	$prefix $installer -y install $packages >> "$install_log" 2>&1 || failed=1;
+	if [ $failed == 0 ]; then
+		echo -e "$y_l  done";
+	else
+		echo -e "$r_l  failed!";
+	fi
+fi
+
+# additional rpm
+if ! hash sshpass 2>/dev/null; then
+	[ "$(arch)" == "i686" ] && sshpass_src=$sshpass86_src;
+	echo -e "$w_l  install$g_l sshpass$y_l\tfrom: $sshpass_src";
+	echo "+++ $(date): rpm -i $sshpass_src" >> "$install_log";
+	$prefix rpm -i $sshpass_src >> "$install_log" 2>&1 || failed=1;
+fi
+
+if ! hash upx 2>/dev/null; then
+	[ -f "$bindir"/upx ] && rm -f "$bindir"/upx &>/dev/null;
+	if [ "$(uname -m)" == "x86_64" ]; then
+		upxarch="upx-3.95-amd64_linux";
+	else
+		upxarch="upx-3.95-i386_linux";
+	fi
+	upxarchive=$upxarch".tar.bz2";
+	[ -f "$dldir"/$upxarchive ] && rm -f "$dldir"/$upxarchive &>/dev/null;
+	upxurl="http://upx.sourceforge.net/download/$upxarchive";
+	echo -e "$w_l  get$g_l upx$y_l\tfrom: $upxurl";
+	echo "+++ $(date): wget $upxurl" >> "$install_log";
+	if wget --directory-prefix="$dldir" --append-output="$install_log" $upxurl; then
+		echo "+++ $(date): tar xjvf $upxarchive" >> "$install_log";
+		tar xjvf "$dldir"/$upxarchive --directory="$bindir" $upxarch/upx --strip-components=1 >> "$install_log" 2>&1 || failed=1;
+		[ -f "$dldir"/$upxarchive ] && rm -f "$dldir"/$upxarchive &>/dev/null;
+	else
+		failed=1;
+	fi
+fi
+
+
+[ $failed == 1 ] && echo -e "\n$r_l  Installation with errors - see: $install_log";
+
+return $failed;
+}
diff --git a/support/os/suse.install b/support/os/suse.install
new file mode 100644
index 0000000..d85906e
--- /dev/null
+++ b/support/os/suse.install
@@ -0,0 +1,154 @@
+#!/bin/bash
+
+suse_os(){
+install_log="$ldir/os-install.log";
+failed=0;
+prefix="sudo";
+packages="";
+
+echo -n >"$install_log" &2>/dev/null;
+
+echo -e "$w_l\n  INSTALLATION\n  ============\n";
+
+suse_version=$(grep VERSION= /etc/os-release 2>/dev/null | sed -n 's/^[^0-9]*\([0-9][0-9]*\).*$/\1/p');
+
+sshpass_src="ftp://rpmfind.net/linux/dag/redhat/el6/en/x86_64/dag/RPMS/sshpass-1.05-1.el6.rf.x86_64.rpm";
+sshpass86_src="ftp://rpmfind.net/linux/dag/redhat/el6/en/i386/dag/RPMS/sshpass-1.05-1.el6.rf.i686.rpm";
+
+if [[ "$suse_version" ]]; then
+	[ "$suse_version" -lt 12 ] && { echo -e "$r_l  This system is not supported anymore!\n"; return 1; }
+	[ "$suse_version" -gt 13 ] && [ "$suse_version" -lt 42 ] && echo -e "$r_l  This installer is still in the testing stage!";
+	[ "$suse_version" -gt 42 ] && echo -e "$r_l  This installer is still in the testing stage!";
+else
+	echo -e "$r_l  System not recognised -> Abort!\n"; return 1;
+fi
+
+# without sudo no user installation allowed
+hash sudo 2>/dev/null || { [ "$(whoami)" != "root" ] && { echo -e "$r_l  You need to be root for that!\n"; return 1; } }
+
+# root needs no sudo
+[ "$(whoami)" == "root" ] && prefix="";
+
+# check for sufficient repositories - SLES & SLED need an additional "SUSE Linux Enterprise Software Development Kit"
+if grep "Enterprise" /etc/os-release >/dev/null; then
+	echo -n -e "$w_l  SUSE Linux Enterprise detected$g_l check for SDK repository...";
+	if ! zypper wp subversion >/dev/null; then
+		echo -e "$r_l\n  You need to install \"SUSE Linux Enterprise Software Development Kit\" first!\n  Get it from https://download.suse.com\n"; return 1;
+	fi
+	echo -e "$y_l ok";
+fi
+
+for e in "${binvars[@]}";
+do
+	if ! hash "$e" 2>/dev/null; then
+		inst="$e";
+		case $e in
+		svn)
+			inst="subversion";
+			;;
+		xz)
+			inst="xz-utils";
+			;;
+		esac;
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi;
+done;
+
+for e in "${headervars[@]}";
+do
+	e1=$(find /usr/include/* |grep -m1 "$e");
+	if [ ! ${#e1} -gt 8 ]; then
+		case $e in
+		crypto.h)
+				inst="libopenssl-devel";
+			;;
+		libusb.h)
+				inst="libusb-1_0-devel";
+			;;
+		pcsclite.h)
+				inst="pcsc-lite-devel";
+			;;
+		pthread.h)
+				inst="glibc-devel";
+			;;
+		esac;
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi;
+done;
+
+for e in "${libvars[@]}";
+do
+	e1=$(find /usr/lib* |grep -m1 "$e");
+	if [ ! ${#e1} -gt 8 ]; then
+		case $e in
+		libccidtwin.so)
+				inst="pcsc-ccid";
+			;;
+		esac;
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi;
+done;
+
+if [ "$(uname -m)" == "x86_64" ] && [ ! -f /usr/lib/libz.so ]; then
+	if [ ! -f /usr/lib/libz.so ]; then
+		e="zlib32";
+		inst="zlib-devel-32bit glibc-32bit libz1-32bit";
+		echo -e "$w_l  select $g_l$e$y_l\tfrom: $inst";
+		packages="$packages $inst";
+	fi
+fi
+
+if [ ${#packages} -gt 0 ]; then
+	echo -n -e "$w_l  update$g_l package list...";
+	echo "+++ $(date): zypper --non-interactive refresh" >> "$install_log"
+	$prefix zypper --non-interactive refresh >> "$install_log" 2>&1;
+	echo -e "$y_l done";
+	echo -n -e "$w_l  install$g_l selected packages$y_l please wait...";
+	echo "+++ $(date): zypper --non-interactive --ignore-unknown install$packages" >> "$install_log"
+	$prefix zypper --non-interactive --ignore-unknown install $packages >> "$install_log" 2>&1 || failed=1;
+	if [ $failed == 0 ]; then
+		echo -e "$y_l  done";
+	else
+		echo -e "$r_l  failed!";
+	fi
+fi
+
+# additional rpm
+if ! hash sshpass 2>/dev/null; then
+	[ "$(arch)" == "i686" ] && sshpass_src=$sshpass86_src;
+	echo -e "$w_l  install$g_l sshpass$y_l\tfrom: $sshpass_src";
+	echo "+++ $(date): rpm -i $sshpass_src" >> "$install_log";
+	$prefix rpm -i $sshpass_src >> "$install_log" 2>&1 || failed=1;
+	echo -e -n ;
+fi
+
+upxversion=(0 0);
+hash upx 2>/dev/null && upxversion=($(upx -V | awk 'NR==1 { verok=$2>=3.91; printf "%.2f %i", $2, verok }'));
+if [ ${upxversion[1]} == 0 ]; then
+	[ -f "$bindir"/upx ] && rm -f "$bindir"/upx &>/dev/null;
+	if [ "$(uname -m)" == "x86_64" ]; then
+		upxarch="upx-3.95-amd64_linux";
+	else
+		upxarch="upx-3.95-i386_linux";
+	fi
+	upxarchive=$upxarch".tar.bz2";
+	[ -f "$dldir"/$upxarchive ] && rm -f "$dldir"/$upxarchive &>/dev/null;
+	upxurl="http://upx.sourceforge.net/download/$upxarchive";
+	echo -e "$w_l  get newer$g_l upx$y_l\tfrom: $upxurl";
+	echo "+++ $(date): wget $upxurl" >> "$install_log";
+	if wget --directory-prefix="$dldir" --append-output="$install_log" $upxurl; then
+		echo "+++ $(date): tar xjvf $upxarchive" >> "$install_log";
+		tar xjvf "$dldir"/$upxarchive --directory="$bindir" $upxarch/upx --strip-components=1 >> "$install_log" 2>&1 || failed=1;
+		[ -f "$dldir"/$upxarchive ] && rm -f "$dldir"/$upxarchive &>/dev/null;
+	else
+		failed=1;
+	fi
+fi
+
+[ $failed == 1 ] && echo -e "\n$r_l  Installation with errors - see: $install_log";
+
+return $failed;
+}
diff --git a/support/profiles/best.box.profile b/support/profiles/best.box.profile
new file mode 100644
index 0000000..d80929c
--- /dev/null
+++ b/support/profiles/best.box.profile
@@ -0,0 +1,5 @@
+readers_on
+USE_UTF8
+WEBIF DEBUG DVBAPI READ_SDT LIVELOG JQUERY LB CACHEEX IPV6
+CCCAM CAMD35 CAMD35_TCP
+INTERNAL PHOENIX STINGER SMARGO_off
diff --git a/support/stapi/liboscam_stapi.a b/support/stapi/liboscam_stapi.a
new file mode 100644
index 0000000..e456f09
Binary files /dev/null and b/support/stapi/liboscam_stapi.a differ
diff --git a/support/stapi/liboscam_stapi5_OPENBOX.a b/support/stapi/liboscam_stapi5_OPENBOX.a
new file mode 100644
index 0000000..d2da226
Binary files /dev/null and b/support/stapi/liboscam_stapi5_OPENBOX.a differ
diff --git a/support/stapi/liboscam_stapi5_UFS916.a b/support/stapi/liboscam_stapi5_UFS916.a
new file mode 100644
index 0000000..5ffc6d7
Binary files /dev/null and b/support/stapi/liboscam_stapi5_UFS916.a differ
diff --git a/support/stapi/liboscam_stapi5_UFS916_0.03.a b/support/stapi/liboscam_stapi5_UFS916_0.03.a
new file mode 100644
index 0000000..ff13186
Binary files /dev/null and b/support/stapi/liboscam_stapi5_UFS916_0.03.a differ
diff --git a/support/toolchains.cfg/arm_s3_ssl098 b/support/toolchains.cfg/arm_s3_ssl098
new file mode 100644
index 0000000..e40aef9
--- /dev/null
+++ b/support/toolchains.cfg/arm_s3_ssl098
@@ -0,0 +1,19 @@
+_toolchainname="arm_s3_ssl098"
+default_use="USE_UTF8 USE_LIBCRYPTO";
+_description="Dreambox ARM"
+_oscamconfdir_default="/var/keys"
+_oscamconfdir_custom=""
+
+_compiler="arm-simplebuild3-linux-gnueabi-"
+_sysroot="arm-simplebuild3-linux-gnueabi/sysroot"
+_libsearchdir="/usr/lib"
+_toolchainfilename="YXJtX3MzX3NzbDA5OC50YXIueHo=";
+_md5sum="02215a912feb4fc499572e5cd53567f2  Toolchain-arm_s3_ssl098.tar.xz"
+_tc_info="\n
+    !!! GENERIC ARM Toolchain !!!\n
+        with OPENSSL 0.9.8zh \n
+	   \n
+\n
+";
+
+_tc_infolines="6"
\ No newline at end of file
diff --git a/support/toolchains.cfg/arm_s3_ssl100 b/support/toolchains.cfg/arm_s3_ssl100
new file mode 100644
index 0000000..052b035
--- /dev/null
+++ b/support/toolchains.cfg/arm_s3_ssl100
@@ -0,0 +1,19 @@
+_toolchainname="arm_s3_ssl100"
+default_use="USE_UTF8 USE_LIBCRYPTO";
+_description="Dreambox ARM"
+_oscamconfdir_default="/var/keys"
+_oscamconfdir_custom=""
+
+_compiler="arm-simplebuild3-linux-gnueabi-"
+_sysroot="arm-simplebuild3-linux-gnueabi/sysroot"
+_libsearchdir="/usr/lib"
+_toolchainfilename="YXJtX3MzX3NzbDEwMC50YXIueHo=";
+_md5sum="0d040f672f57ae37672b6f94413a9d8e  Toolchain-arm_s3_ssl100.tar.xz";
+_tc_info="\n
+    !!! GENERIC ARM Toolchain !!!\n
+        with OPENSSL 1.0.0t \n
+	   \n
+\n
+";
+
+_tc_infolines="6"
\ No newline at end of file
diff --git a/support/toolchains.cfg/arm_s3_ssl102 b/support/toolchains.cfg/arm_s3_ssl102
new file mode 100644
index 0000000..376abf7
--- /dev/null
+++ b/support/toolchains.cfg/arm_s3_ssl102
@@ -0,0 +1,19 @@
+_toolchainname="arm_s3_ssl102"
+default_use="USE_UTF8 USE_LIBCRYPTO";
+_description="Dreambox ARM"
+_oscamconfdir_default="/var/keys"
+_oscamconfdir_custom=""
+
+_compiler="arm-simplebuild3-linux-gnueabi-"
+_sysroot="arm-simplebuild3-linux-gnueabi/sysroot"
+_libsearchdir="/usr/lib"
+_toolchainfilename="YXJtX3MzX3NzbDEwMi50YXIueHo=";
+_md5sum="515ed7582dc8e6044069d4ab34ee35da  Toolchain-arm_s3_ssl102.tar.xz";
+_tc_info="\n
+    !!! GENERIC ARM Toolchain !!!\n
+        with OPENSSL 1.0.2q \n
+	   \n
+\n
+";
+
+_tc_infolines="6"
\ No newline at end of file
diff --git a/support/toolchains.cfg/mipsel_s3_ssl098 b/support/toolchains.cfg/mipsel_s3_ssl098
new file mode 100644
index 0000000..41f29f2
--- /dev/null
+++ b/support/toolchains.cfg/mipsel_s3_ssl098
@@ -0,0 +1,20 @@
+_toolchainname="mipsel_s3_ssl098";
+default_use="USE_UTF8 USE_LIBCRYPTO";
+_description="generic mipsel ssl 0.9.8";
+_oscamconfdir_default="/var/keys";
+_oscamconfdir_custom=""
+_compiler="mipsel-simplebuild3-linux-gnu-";
+
+_sysroot="/";
+_libsearchdir="/lib";
+_toolchainfilename="bWlwc2VsX3MzX3NzbDA5OC50YXIueHoK";
+_md5sum="966c590d2178f6d401c93993eba4f7f9  Toolchain-mipsel_s3_ssl098.tar.xz";
+_tc_info="\n
+    !!! generic mipsel ssl 0.9.8 !!!\n
+     this toolchain is compatible with\n
+\n
+Dreambox: dm500,dm800,500HD,800HD,800SE,7020HD,
+          7025,8000\n
+VU+     : Zero,Solo²,SoloSE,SoloSE(V2),Duo,Duo²";
+
+_tc_infolines="6";
\ No newline at end of file
diff --git a/support/toolchains.cfg/mipsel_s3_ssl100 b/support/toolchains.cfg/mipsel_s3_ssl100
new file mode 100644
index 0000000..a8c1ae8
--- /dev/null
+++ b/support/toolchains.cfg/mipsel_s3_ssl100
@@ -0,0 +1,20 @@
+_toolchainname="mipsel_s3_ssl100";
+default_use="USE_UTF8 USE_LIBCRYPTO";
+_description="generic mipsel ssl 1.0.0";
+_oscamconfdir_default="/var/keys";
+_oscamconfdir_custom=""
+
+_compiler="mipsel-simplebuild3-linux-gnu-";
+_sysroot="/";
+_libsearchdir="/lib";
+_toolchainfilename="bWlwc2VsX3MzX3NzbDEwMC50YXIueHoK";
+_md5sum="b1ff681eff62b0e639d37e001b97e1e0  Toolchain-mipsel_s3_ssl100.tar.xz";
+_tc_info="\n
+    !!! generic mipsel ssl 1.0.0 !!!\n
+     this toolchain is compatible with\n
+\n
+Dreambox: dm500,dm800,500HD,800HD,800SE,7020HD,
+          7025,8000\n
+VU+     : Zero,Solo²,SoloSE,SoloSE(V2),Duo,Duo²";
+
+_tc_infolines="6";
\ No newline at end of file
diff --git a/support/toolchains.cfg/mipsel_s3_ssl102 b/support/toolchains.cfg/mipsel_s3_ssl102
new file mode 100644
index 0000000..1329fab
--- /dev/null
+++ b/support/toolchains.cfg/mipsel_s3_ssl102
@@ -0,0 +1,20 @@
+_toolchainname="mipsel_s3_ssl102";
+default_use="USE_UTF8 USE_LIBCRYPTO";
+_description="generic mipsel ssl 1.0.2";
+_oscamconfdir_default="/var/keys";
+_oscamconfdir_custom=""
+
+_compiler="mipsel-simplebuild3-linux-gnu-";
+_sysroot="/";
+_libsearchdir="/lib";
+_toolchainfilename="bWlwc2VsX3MzX3NzbDEwMi50YXIueHoK";
+md5sum="985ba51ae41cacd008fb6c7490e2f287  Toolchain-mipsel_s3_ssl102.tar.xz"
+_tc_info="\n
+    !!! generic mipsel ssl 1.0.2 !!!\n
+     this toolchain is compatible with\n
+\n
+Dreambox: dm500,dm800,500HD,800HD,800SE,7020HD,
+          7025,8000\n
+VU+     : Zero,Solo²,SoloSE,SoloSE(V2),Duo,Duo²";
+
+_tc_infolines="6";
diff --git a/support/toolchains.cfg/native b/support/toolchains.cfg/native
new file mode 100644
index 0000000..49f38fb
--- /dev/null
+++ b/support/toolchains.cfg/native
@@ -0,0 +1,12 @@
+_toolchainname="native";
+default_use="USE_UTF8 USE_LIBCRYPTO";
+_oscamconfdir_default="/usr/local/etc";
+_oscamconfdir_custom="not_set";
+_compiler="x86_64-linux-gnu-";
+_tc_info="Native System Compiler gcc (Debian 8.2.0-16) 8.2.0
+Copyright (C) 2018 Free Software Foundation, Inc.
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.";
+_libsearchdir="/lib";
+_menuname="native";
+_sysroot="/";
diff --git a/support/toolchains.cfg/openpli40 b/support/toolchains.cfg/openpli40
new file mode 100644
index 0000000..13bbca1
--- /dev/null
+++ b/support/toolchains.cfg/openpli40
@@ -0,0 +1,20 @@
+_toolchainname="openpli40"
+default_use="USE_UTF8 USE_LIBCRYPTO";
+_description="Openpli Dreambox Vu+ and other"
+_oscamconfdir_default="/usr/keys"
+_oscamconfdir_custom=""
+
+_compiler="mipsel-openpli40-linux-gnu-"
+_sysroot="mipsel-openpli40-linux-gnu/sysroot"
+_libsearchdir="/lib"
+_toolchainfilename="T3BlblBMSV80LjAudGFyLnh6";
+
+_tc_info="\n
+    !!! beware the box must have FPU !!!\n
+     this toolchain is compatible with\n
+\n
+Dreambox: 500HD,800HD,800SE,7020HD,7025,8000\n
+VU+     : Zero,Solo²,SoloSE,SoloSE(V2),Duo,Duo²";
+
+_tc_infolines="6"
+
diff --git a/support/toolchains.cfg/openwrt1505cc b/support/toolchains.cfg/openwrt1505cc
new file mode 100644
index 0000000..6bcb462
--- /dev/null
+++ b/support/toolchains.cfg/openwrt1505cc
@@ -0,0 +1,20 @@
+_toolchainname="openwrt1505cc";
+default_use="USE_UTF8 USE_LIBCRYPTO";
+_description="OpenWRT 15.05.1 Chaos Calmer"
+_oscamconfdir_default="/etc/config/oscam"
+_oscamconfdir_custom="/etc/config/oscam"
+_stagingdir=1
+
+_compiler="mips-openwrt-linux-uclibc-"
+_sysroot=""
+_libsearchdir="/lib"
+_toolchainfilename="b3BlbndydDE1MDVjYy50YXIueHo=";
+_block="USE_PCSC"
+_tc_info="\n
+    !!! OpenWRT 15.05.1 Chaos Calmer !!!\n
+       this toolchain is compatible with\n
+	             fill with info\n
+\n
+";
+
+_tc_infolines="6"
\ No newline at end of file
diff --git a/support/toolchains.cfg/osmio4k b/support/toolchains.cfg/osmio4k
new file mode 100644
index 0000000..13e9fc0
--- /dev/null
+++ b/support/toolchains.cfg/osmio4k
@@ -0,0 +1,18 @@
+_toolchainname="osmio4k";
+default_use="USE_UTF8 USE_LIBCRYPTO";
+_description="Edision OS MIO 4k aarch64";
+_oscamconfdir_default="/var/keys/";
+_oscamconfdir_custom=""
+
+_compiler="aarch64-osmio4k-linux-gnu-";
+_sysroot="aarch64-osmio4k-linux-gnu/sysroot/";
+_libsearchdir="/lib";
+_toolchainfilename="b3NtaW80ay50YXIueHoK";
+_md5sum="41fbf9b4f91eb61cb926565da644b6ed  Toolchain-osmio4k.tar.xz";
+_tc_info="\n
+    !!! beware the box must have FPU !!!\n
+     this toolchain is compatible with\n
+\n
+Edsion     : OS MIO 4K aarch64";
+
+_tc_infolines="5"
diff --git a/support/toolchains.cfg/solo4k b/support/toolchains.cfg/solo4k
new file mode 100644
index 0000000..994f04f
--- /dev/null
+++ b/support/toolchains.cfg/solo4k
@@ -0,0 +1,18 @@
+_toolchainname="solo4k";
+default_use="USE_UTF8 USE_LIBCRYPTO";
+_description="VU+ Solo4k";
+_oscamconfdir_default="/var/tuxbox/config";
+_oscamconfdir_custom=""
+
+_compiler="arm-linux-gnueabihf-";
+_sysroot="arm-linux-gnueabihf";
+_libsearchdir="/lib";
+_toolchainfilename="c29sbzRrLnRhci54ego=";
+
+_tc_info="\n
+    !!! beware the box must have FPU !!!\n
+     this toolchain is compatible with\n
+\n
+VU+     : Solo4k";
+
+_tc_infolines="5"
\ No newline at end of file
diff --git a/support/translation/de b/support/translation/de
new file mode 100644
index 0000000..eee3aed
--- /dev/null
+++ b/support/translation/de
@@ -0,0 +1,113 @@
+#!/bin/bash
+
+#deutsch
+txt_as='als';
+txt_of='von';
+txt_for='für';
+txt_b2="baue";
+txt_to="nach";
+txt_now='nun';
+txt_b1='bauen';
+txt_menu='Menü';
+txt_no='keinen';
+txt_name='Name';
+txt_use='benutze';
+txt_back='zurück';
+txt_done=' fertig';
+txt_error='Fehler';
+txt_missing='fehlt';
+txt_sel='auswählen';
+txt_delete='lösche';
+txt_found='gefunden';
+txt_create='erstelle';
+txt_loading='    lade';
+txt_profile='Profil';
+txt_profiles='Profile';
+txt_conf='Konfiguration';
+txt_parameter='Parameter';
+txt_extracting='entpacke';
+txt_wait='bitte warten...';
+txt_existing='vorhandenen';
+txt_ssh_profiles='SSH $txt_profiles';
+txt_not_found='nicht gefunden';
+txt_n_installed='ist nicht installiert';
+txt_start_menu='Hauptmenü';
+txt_back_main="$txt_back zum $txt_start_menu";
+txt_too_old='(zu alt wird nicht unterstützt)';
+txt_selected='ausgewählten';
+txt_update='aktualisiere';
+txt_example_name='Beispiel: dm820.stube';
+txt_save='speichern';
+txt_filename='Dateiname';
+txt_LOAD="UPLOAD";
+txt_tc="Toolchain";
+
+# menu txt
+txt_remove_menu="$txt_tc entfernen";
+txt_add_menu="$txt_tc hinzufügen";
+txt_main_revision="\n Die aktuelle SVN REVISION ist : r";
+txt_bmenu_title="Baumenü";
+
+# help txt
+txt_help1="beginnen mit"
+txt_help2="Kommandozeilen Parameter sind"
+txt_help3="Taste [ENTER] zum fortsetzen..."
+
+# firstmenu ################################################
+txt_firstmenu_continue="weiter mit lokalem SVN";
+   txt_firstmenu_chose="anderen SVN Stand (7000+) laden";
+   txt_firstmenu_cedit="$txt_conf""s Editor starten";
+    txt_firstmenu_lang="Systemsprache manuell $txt_sel";
+    txt_firstmenu_exit="simplebuild sofort beenden";
+
+# _toolchain_config_menu ###################################
+     txt_config_menu="$txt_conf $txt_menu";
+      txt_back_build="$txt_back zum $txt_bmenu_title";
+txt_module_configure="oscam Module $txt_sel";
+     txt_oscam_extra="oscam Extras USB/PCSC $txt_sel";
+     txt_build_extra="build Extras compress/patch $txt_sel";
+      txt_build_load="letzte $txt_conf laden";
+      txt_build_save="$txt_conf speichern";
+     txt_build_reset="$txt_conf $txt_back setzen";
+       txt_use_targz='erstelle tar Archiv nach dem Bauen';
+       txt_use_patch='patche oscam vor dem Bauen';
+    txt_use_compress='Binärkompression von oscam';
+
+# _toolchain_build_menu ####################################
+   txt_bmenu_user="Benutzername   ";
+   txt_bmenu_comp="Compiler       ";
+   txt_bmenu_debu="Debug Info     ";
+    txt_bmenu_use="USE_Variablen ";
+  txt_bmenu_build="oscam jetzt $txt_b1";
+ txt_bmenu_config="oscam/Build $txt_conf";
+txt_bmenu_profile="vorhandenes $txt_profile laden";
+txt_bmenus_profile="$txt_profile $txt_save";
+    txt_bmenu_log="zeige lastbuild.log";
+   txt_bmenu_back="$txt_back zur Toolchainauswahl";
+    txt_compress1="Dateigröße davor          ";
+    txt_compress2="Dateigröße danach         ";
+    txt_compress3="Dateigröße verkleinert auf";
+
+# _toolchain_main_menu ####################################
+txt_menu_builder1="Beende simplebuild";
+txt_menu_builder2="einen neuen $txt_tc hinzufügen";
+txt_menu_builder3="entferne einen installierten $txt_tc";
+txt_menu_builder4="Nativ $txt_for";
+txt_menu_back="Zurück zum $txt_tc $txt_menu";
+
+# _dialog_checkout ########################################
+txt_verify_syscheck='überprüfe System            :';
+     txt_verify_svn='überprüfe existierenden SVN :';
+     txt_update_svn="$txt_update SVN            :";
+    txt_prepare_svn="bereite SVN checkout vor :";
+         txt_latest="letzter Stand";
+
+# _load_profile ###########################################
+  txt_select_profile_title="Verfügbare $txt_profiles";
+        txt_select_profile="bitte ein $txt_profile auswählen";
+txt_confirm_profile_select="bitte bestätigen sie die Auswahl von:";
+      txt_no_profile_found="kein $txt_profile gefunden in\n\n$profdir";
+
+# _upload_cam #############################################
+txt_upload_cam1="ssh $txt_profile existiert nicht";
+txt_upload_cam2="ssh $txt_profile gefunden";
diff --git a/support/translation/en b/support/translation/en
new file mode 100644
index 0000000..44bba45
--- /dev/null
+++ b/support/translation/en
@@ -0,0 +1,100 @@
+#!/bin/bash
+
+#english
+
+txt_as='as';
+txt_of='of';
+txt_for='for';
+txt_b2="build";
+txt_to="to";
+txt_now='now';
+txt_b1='build';
+txt_menu='menu';
+txt_done=' done';
+txt_no='no';
+txt_use='use';
+txt_back='back';
+txt_error='error';
+txt_loading='    load';
+txt_sel='select';
+txt_delete='delete';
+txt_found='found';
+txt_create='create';
+txt_conf='configuration';
+txt_extracting='extracting';
+txt_wait='please wait...';
+txt_existing='exists';
+txt_profiles='profiles';
+txt_not_found='not found';
+txt_n_installed='is not installed';
+txt_back_main="back to main menu";
+txt_too_old='(too old or not supported)';
+txt_selected='selected';
+txt_update='now updating';
+txt_tc="Toolchain";
+
+# menu txt
+txt_start_menu='Main menu';
+txt_remove_menu='Remove toolchain';
+txt_add_menu='Add toolchain';
+txt_main_revision="\n the local SVN revision is : r";
+
+# help txt
+txt_help1="begin with"
+txt_help2="commandline Parameters are"
+txt_help3="[ENTER] to continue..."
+
+# firstmenu ################################################
+txt_firstmenu_continue="continue with local SVN";
+   txt_firstmenu_chose="load a different SVN (7000+)";
+   txt_firstmenu_cedit="start configuration editor";
+    txt_firstmenu_lang="manual system language selection";
+    txt_firstmenu_exit="close simplebuild now";
+
+# _toolchain_config_menu ###################################
+     txt_config_menu="configuration menu";
+      txt_back_build="back to build menu";
+txt_module_configure="select oscam modules ";
+     txt_oscam_extra="select oscam extras USB/PCSC";
+     txt_build_extra="select build extras compress/patch";
+      txt_build_load="load last configuration";
+      txt_build_save="save configuration";
+     txt_build_reset="reset configuration";
+
+# _toolchain_build_menu#####################################
+ txt_bmenu_title="build menu";
+  txt_bmenu_user="username       ";
+  txt_bmenu_comp="compiler       ";
+  txt_bmenu_debu="debug info     ";
+   txt_bmenu_use="USE_variables ";
+ txt_bmenu_build="build oscam now";
+txt_bmenu_config="oscam/build configuration";
+   txt_bmenu_log="show lastbuild.log";
+  txt_bmenu_back="back to toolchain selection";
+   txt_compress1="filesize before     ";
+   txt_compress2="filesize after      ";
+   txt_compress3="filesize reduced to ";
+
+# _toolchain_main_menu#####################################
+txt_menu_builder1="close simplebuild";
+txt_menu_builder2="add new toolchain";
+txt_menu_builder3="remove installed toolchain";
+txt_menu_builder4="build native for";
+txt_menu_back="back to toolchain menu";
+
+# _dialog_checkout
+txt_verify_syscheck='check system                :';
+     txt_verify_svn='check existing SVN          :';
+     txt_update_svn="$txt_update SVN            :";
+    txt_prepare_svn="prepare SVN checkout     :";
+         txt_latest="latest SVN";
+
+# _load_profile ###########################################
+  txt_select_profile_title="available profiles";
+        txt_select_profile="please select a profile";
+txt_confirm_profile_select="please confirm the selection of:";
+      txt_no_profile_found="no profile found in\n\n$profdir";
+
+# _upload_cam #############################################
+txt_upload_cam1="ssh profile doesn't exist";
+txt_upload_cam2="ssh profile found";
diff --git a/support/translation/fr b/support/translation/fr
new file mode 100644
index 0000000..3f3c7f6
--- /dev/null
+++ b/support/translation/fr
@@ -0,0 +1,158 @@
+#!/bin/bash
+
+#francais
+
+
+
+
+
+
+
+
+
+txt_create='crée dans';
+txt_bmenu_user="Utilisateur    ";
+txt_bmenu_comp="Compilateur    ";
+txt_bmenu_debu="Info Debug     ";
+txt_bmenu_acti="Options Actives";
+txt_wait="Veuillez patienter...";
+txt_build="Compilation";
+txt_to="à";
+txt_lc="utiliser";
+txt_lang_select="Change langue";
+txt_force="Forcer une MAJ rapide";
+txt_back="Retour au choix de la toolchain";
+txt_end="Quitter Simplebuild";
+txt_offline="Hors Ligne";
+txt_error="Erreur";
+txt_LOAD="UPLOAD";
+txt_DOWNLOAD="Téléchargment en cours";
+txt_REMOVE="Supprimer";
+txt_found_in="trouvé dans";
+txt_found_in_archiv="localisé dans archiv";
+txt_buildtime="Temps de Compilation";
+txt_nosvn="Pas de version SVN trouvée";
+txt_with="avec";
+txt_old="Ancien";
+txt_no_stapi="pas de STAPI SH4 disponible !!!";
+txt_rm="effacé";
+txt_help1="démarrer avec";
+txt_help2="les paramètres de lignes de commande possibles sont";
+txt_help3="touche [ENTER] pour continuer..."
+txt_compressor1="Choisissez le compresseur de binaires\n pour votre systeme de compilation";
+txt_compressor2="résultat : ";
+txt_compressor3="détecté";
+txt_compressor4="non détecté";
+txt_packok="est compressé dans archiv";
+txt_packfail="n'a pu compresser";
+txt_rcheckout="Structure SVN manquante ... Mise à jour, Veuillez Patienter !\n";
+txt_extra1=" Choisissez les options :\n [*] = activer; [ ] = désactiver";
+txt_extra2="Support des lecteurs USB";
+txt_extra3="Support des lecteurs PCSC";
+txt_extra4="Support de STAPI";
+txt_extra5="Support de COOLAPI";
+txt_extra6="Compiler les libs dans OScam";
+txt_extra7="Compacter le binaire oscam en .tar.gz";
+txt_extra8="Compresser le binaire oscam avec UPX";
+txt_checksys1="\n vérification des fichiers\n -------------------------\n";
+txt_checksys2="\n vérification des packages\n -------------------------\n";
+txt_checksys3="est installé";
+txt_checksys4="... nest pas installé";
+txt_checksys5="installé ";
+txt_checksys6="... nest pas installé";
+txt_checksys7=" trouvé dans ";
+txt_cfg_path1="valeur par défaut";
+txt_cfg_path2="valeur actuelle";
+txt_cfg_path3="répertoire de configuration";
+txt_lib_path1="répertoire de librairies";
+txt_custom_suffix="laissez vide pour utiliser les valeurs par défaut";
+txt_online_update1="version locale";
+txt_online_update2="version en ligne";
+txt_online_update3="Voulez-vous mettre à jour SIMPLEBUILD ?";
+txt_conf_update1="version locale";
+txt_conf_update2="version en ligne";
+txt_conf_update3="Voulez-vous mettre à jour le fichier de CONFIG ?";
+txt_patch="utiliser patch";
+txt_patch_off1="patche(s) trouvé(s) pour suppression\n------------------------------------";
+txt_patch_off2="supprimer patch";
+txt_patch_off3="supprimer";
+txt_patch_off4="fichier de la source";
+txt_patch_on1="patche(s) trouvé(s) pour application\n------------------------------------";
+txt_patch_on2="appliquer patch";
+txt_con_check1="Téléchargement manquant";
+txt_con_check2="taille de toolchain incorrecte. Supprimez et recommencez !";
+txt_con_check3="Téléchargement impossible";
+txt_configure_title="[ CONFIGURATION ]";
+txt_configure_menu0="Configuration";
+txt_configure_menu1="Add-ons, Protocoles, Systèmes CA, Lecteurs de Cartes";
+txt_configure_menu2="Autres Réglages (USB/PCSC/STAPI/COOL/PACK/PATCH/COMPRESS)";
+txt_configure_menu3="Changer le répertoire de config par défaut";
+txt_configure_menu4="Changer le répertoire des librairies par défaut";
+txt_configure_menu5="Choisir le Compresseur Binaire";
+txt_configure_menu6="Choisir un suffixe personnalisé pour le binaire OSCAM";
+txt_configure_menu7="Retour au MENU DE COMPILATION";
+txt_cmdline1="Checkout Revision";
+txt_cmdline2="Checkout trunk";
+txt_cmdline3="prise en compte du profil par défaut";
+txt_cmdline4="prise en compte du profil custom";
+txt_cmdline5="prise en compte du profil saved";
+txt_cmdline6="profil custom absent\n profil par défaut pris en compte";
+txt_cmdline7="profil saved absent\n profile par défaut pris en compte";
+txt_cmd_build1="pas de SVN correct trouvé\n supprimez oscam-svn !!\n ----------------------";
+txt_cmd_build2="SVN effacé\n redemarrez simplebuild !!\n --------------------------------------";
+txt_cmd_build3="appliquer le(s) patche(s)\n -------------------------";
+txt_cmd_build4="patches trouvé(s) pour être appliqué(s)";
+txt_cmd_build5="appliquer le patch";
+txt_cmd_build6="Nettoyer le SVN d'OSCam local";
+txt_cmd_build7="Taille du binaire avant compression";
+txt_cmd_build8="Taille du binaire après compression";
+txt_cmd_build9="Taille du binaire réduite à";
+txt_cmd_build10="supprimer les patches\n ---------------------";
+txt_cmd_build11="patche(s) trouvé(s) pour être appliqués";
+txt_cmd_build12="échec de compilation";
+txt_cmd_build13="voir le fichier build.log";
+txt_cmd_build14="supprimer patch";
+txt_cmd_build_title="[ INFO Compression ]";
+txt_b_menu_title="[ Options de compilation ]";
+txt_b_menu_options1="pas d'options actives";
+txt_b_menu1="[ MENU DE COMPILATION ]";
+txt_b_menu2="Informations";
+txt_b_menu3="Réglages Actuels";
+txt_b_menu4="Configuration et Réglages d'OSCam";
+txt_b_menu5="Compiler OSCam";
+txt_b_menu6="Voir build.log";
+txt_b_menu7="Voir la configuration d'OSCam";
+txt_upload_cam1="le fichier de configuration n'existe pas";
+txt_upload_cam2="le fichier de config existe";
+txt_t_menu1="\n La révision actuelle d'OSCam SVN est : r";
+txt_rem_chains1="Veuillez choisir la toolchain à supprimer";
+txt_add_chains1="AJOUTER Toolchain";
+txt_add_chains2="Veuillez choisir la toolchain à ajouter";
+txt_menu_builder1="Quitter Simplebuild";
+txt_menu_builder2="Nouvelle Toolchain";
+txt_menu_builder3="Toolchain installées";
+txt_menu_builder4="Native pour";
+txt_menu_back="Retour à la sélection de Toolchain";
+txt_cedit1="Supprimer le binaire de debug";
+txt_cedit2="Verifier les Toolchains installées";
+txt_cedit3="Activer le système de Patches Automatique";
+txt_cedit4="Activer la vérification de Mises à jour";
+txt_cedit5="Informations detaillées sur la compilation";
+txt_revcheck1="VERIFICATION DE MISE A JOUR";
+txt_revcheck2="Vérification de la version d'OSCam SVN en ligne\n\t\b";
+txt_revcheck3="Révision disponible:";
+txt_revcheck4="Entrer le numéro de Révision...";
+txt_revcheck5="impossible. SVN hors ligne !";
+txt_revcheck6="Vérification de la version d'OSCam SVN locale\n\t\b";
+txt_revsel1="avec locale:";
+txt_revsel2="Effacer la";
+txt_revsel3="et tous les fichiers de configuration";
+txt_revsel4="Editeur de configuration";
+txt_revsel5="Programme";
+txt_revsel6="Mettre à jour vers la dernière Révision";
+txt_options1="Editer Options :";
+txt_options2="activer";
+txt_options3="activer";
+txt_options4="OK rédemarre Simplebuild";
+txt_options_title="Editeur de Configuration";
+txt_disksvn="révision locale est maintenant "
diff --git a/support/translation/it b/support/translation/it
new file mode 100644
index 0000000..7cac81d
--- /dev/null
+++ b/support/translation/it
@@ -0,0 +1,149 @@
+#!/bin/bash
+
+#italiano
+
+txt_create='creato in';
+txt_bmenu_user="Nome utente           ";
+txt_bmenu_comp="Compilatore           ";
+txt_bmenu_debu="Informazioni di Debug ";
+txt_bmenu_acti="Caratteristiche attive";
+txt_wait="attendere prego...";
+txt_build="compilo";
+txt_lc="utilizzare";
+txt_to="verso";
+txt_force="Checkout rapido";
+txt_back="Torna al menu Toolchain";
+txt_end="Termina Simplebuild";
+txt_offline="offline";
+txt_error="Errore";
+txt_LOAD="CARICA";
+txt_DOWNLOAD="Sto scaricando";
+txt_REMOVE="RIMUOVI";
+txt_found_in="trovato in";
+txt_found_in_archiv="trovato in archivio";
+txt_buildtime="tempo di compilazione";
+txt_nosvn="nessuna svn trovata";
+txt_with="con";
+txt_old="vecchio";
+txt_no_stapi="nessun sh4 STAPI presente!";
+txt_rm="rimosso";
+txt_help1="inizia con";
+txt_help2="Le linee di comando sono";
+txt_help3="Premi [ENTER] per continuare..."
+txt_compressor1="scegli la COMPRESSIONE BINARIA\n  per il tuo SISTEMA DI COMPILAZIONE";
+txt_compressor2="Risultato : ";
+txt_compressor3="trovato";
+txt_compressor4="non trovato";
+txt_packok="è compresso nell'arvhivio";
+txt_packfail="errore durante la compressione";
+txt_rcheckout=" manca SVN. Vengono cerati aggioranmenti. Attendere prego...\n";
+txt_extra1=" Scegliere le caratteristiche :\n [*] = on; [ ] = off";
+txt_extra2="supporto periferiche USB";
+txt_extra3="supporto periferiche PCSC";
+txt_extra4="utilizza la funzione STAPI";
+txt_extra5="utilizza la funzione COOLAPI";
+txt_extra6="includi le librerie in Oscam";
+txt_extra7="comprimere Oscam come .tar.gz";
+txt_extra8="Comprimere Oscam con UPX";
+txt_checksys1="\n controllo file\n --------------\n";
+txt_checksys2="\n controllo pacchetto\n -------------------\n";
+txt_checksys3="è intallato";
+txt_checksys4="... non è installato";
+txt_checksys5="installato ";
+txt_checksys6="... maca";
+txt_checksys7=" trovato in ";
+txt_cfg_path1="default è";
+txt_cfg_path2="impostato è";
+txt_cfg_path3="La CONF_DIR è impostata a";
+txt_lib_path1="La LIB_DIR è impostata a";
+txt_custom_suffix="lasciare vuoto per Standard";
+txt_online_update1="versione locale";
+txt_online_update2="versione online";
+txt_online_update3="Volete cambiare alla versione attuale dello script SIMPLEBUILD";
+txt_conf_update1="versione locale";
+txt_conf_update2="versione online";
+txt_conf_update3="Volete cambiare alla versione attuale del file CONFIG";
+txt_patch="usare patch";
+txt_patch_off1="Patch(e) trovati da eliminare\n-----------------------------";
+txt_patch_off2="rimuovi Patch(s)";
+txt_patch_off3="rimuovo";
+txt_patch_off4="files dalla svn";
+txt_patch_on1="Patch(s) da applicare trovati\n-----------------------------";
+txt_patch_on2="Patch(s) applicare";
+txt_con_check1="carico mancanti";
+txt_con_check2="riconosciuta dimensione Toolchain errata! Rimuovo e ricarico.";
+txt_con_check3="errore durante il caricamento";
+txt_configure_title="[ CONFIGURAZIONE ]";
+txt_configure_menu0="Configurare";
+txt_configure_menu1="Moduli, Protocolli, Lettori, Carten e Driver per Reader";
+txt_configure_menu2="Caratteristiche (USB/PCSC/PACK/PATCH/STAPI/COOLAPI/COMPRESS)";
+txt_configure_menu3="Configurazioni standard- impostazione directory";
+txt_configure_menu4="Librerie standard- impostazione directory";
+txt_configure_menu6="eigene oscam Endung verwenden";
+txt_configure_menu7="Salvare e tornare al menu di compilazione";
+txt_cmdline1="Revisions Checkout";
+txt_cmdline2="Trunk Checkout";
+txt_cmdline3="utilizza il profilo standard";
+txt_cmdline4="utilizza il profilo personalizzato";
+txt_cmdline5="utilizza il profilo salvato";
+txt_cmdline6="profilo personalizzato non trovato\n utilizzo profilo standard";
+txt_cmdline7="profilo salvato non trovato\n utilizzo profilo standard";
+txt_cmd_build1="nessuna SVN originale trovata\n       rimuovi subito oscam-svn !!\n       ---------------------------";
+txt_cmd_build2="SVN rimossa\n       Riavvia Simplebuild!\n       --------------------";
+txt_cmd_build3="applico Patch(s)\n  ----------------";
+txt_cmd_build4="trovato Patch(s) da rimuovere";
+txt_cmd_build5="applicare Patch(s)";
+txt_cmd_build6="pulire SVN";
+txt_cmd_build7="Dimensione file prima          ";
+txt_cmd_build8="Dimensione file dopo           ";
+txt_cmd_build9="Dimensione file rimpicciolita di";
+txt_cmd_build10="rimuovo Patch(s)\n  ----------------";
+txt_cmd_build11="trovato Patch(s) da rimuovere";
+txt_cmd_build12="errore durante la compilazione";
+txt_cmd_build13="leggere build.log"
+txt_cmd_build14="rimuovo Patch(s)";
+txt_cmd_build_title="[ INFO compressione ]";
+txt_b_menu_title="[ Opzioni compilazione ]";
+txt_b_menu_options1="nessuna caratteristica attiva"
+txt_b_menu1="[ MENU COMPILAZIONE ]";
+txt_b_menu2="Informazioni";
+txt_b_menu3="impostazioni applicate";
+txt_b_menu4="imposta OScam";
+txt_b_menu5="Compilo Oscam";
+txt_b_menu6="Mostra build.log";
+txt_b_menu7="mostra la configurazione OScam";
+txt_upload_cam1="manca il file config";
+txt_upload_cam2="file config trovato";
+txt_t_menu1="\n La versione SVN attuale è : r";
+txt_rem_chains1="Selezione per favore il Toolchain da rimuovere";
+txt_add_chains1="Aggiungi Toolchain";
+txt_add_chains2="Selezionare per favore il Toolchain da aggiungere";
+txt_menu_builder1="Termina Simplebuild";
+txt_menu_builder2="Aggiungi un Toolchain";
+txt_menu_builder3="Rimuovi un Toolchain installato";
+txt_menu_builder4="Nativo per";
+txt_menu_back="Torna al menu Toolchain";
+txt_cedit1="Rimuovi il file .debug";
+txt_cedit2="Controlla i Toolchains installati";
+txt_cedit3="Attiva AUTO PATCH SYSTEM";
+txt_cedit4="Attiva Update Check";
+txt_cedit5="SCRIPT mit maximalen Infos beim bau";
+txt_revcheck1="CONTROLLO_UPDATE";
+txt_revcheck2="Controllo versione ONLINE di Oscam";
+txt_revcheck3="Versione trovata:";
+txt_revcheck4="Immettere il numero della SVN desiderata...";
+txt_revcheck5="impossibile. SVN è offline!";
+txt_revcheck6="Controllare la SVN locale";
+txt_revsel1="Continua con SVN locale:";
+txt_revsel2="SVN";
+txt_revsel3="riscaricare e rimuovere le configurazioni";
+txt_revsel4="Editore configurazioni";
+txt_revsel5="Esci dal programma";
+txt_revsel6="Aggiornare all'ultima versione";
+txt_wrong1="buildcamname errato o non trovato";
+txt_options1="Modifica opzioni:";
+txt_options2="ativare";
+txt_options3="Disattivare";
+txt_options4="OK riavvia SIMPLEBUILD";
+txt_options_title="Editore CONFIG";
+txt_disksvn="revisione locale è ora "
diff --git a/support/translation/nl b/support/translation/nl
new file mode 100644
index 0000000..fb4ba7e
--- /dev/null
+++ b/support/translation/nl
@@ -0,0 +1,114 @@
+#!/bin/bash
+
+#nederlands
+
+txt_as='als';
+txt_of='van';
+txt_for='voor';
+txt_b2="build";
+txt_to="naar";
+txt_now='nu';
+txt_b1='compileren';
+txt_menu='Menu';
+txt_no='geen';
+txt_name='Naam';
+txt_use='gebruik';
+txt_back='terug';
+txt_done=' klaar';
+txt_error='Fout';
+txt_missing='ontbreekt';
+txt_sel='selecteren';
+txt_delete='verwijderen';
+txt_found='gevonden';
+txt_create='maak';
+txt_loading='   laden';
+txt_profile='profiel';
+txt_profiles='Profielen';
+txt_conf='Configuratie';
+txt_parameter='Parameter';
+txt_extracting='uitpakken';
+txt_wait='momentje...';
+txt_existing='bestaande';
+txt_ssh_profiles='SSH $txt_profiles';
+txt_not_found='niet gevonden';
+txt_n_installed='is niet geïnstalleerd';
+txt_start_menu='Hoofdmenu';
+txt_back_main="$txt_back naar $txt_start_menu";
+txt_too_old='(te oud of niet ondersteund)';
+txt_selected='geselecteerd';
+txt_update='nu bijwerken';
+txt_example_name='Voorbeeld: dm820.slaapkmr';
+txt_save='opslaan';
+txt_filename='Bestandsnaam';
+txt_LOAD="UPLOAD";
+txt_tc="Toolchain";
+
+# menu txt
+txt_remove_menu='$txt_tc verwijderen';
+txt_add_menu='$txt_tc toevoegen';
+txt_main_revision="\n De actuele SVN versie is : r";
+txt_bmenu_title="Buildmenü";
+
+# help txt
+txt_help1="begin met"
+txt_help2="Opdrachtregel parameters zijn"
+txt_help3="Druk op [ENTER] om door te gaan..."
+
+# firstmenu ################################################
+txt_firstmenu_continue="Doorgaan met lokale SVN";
+   txt_firstmenu_chose="Andere SVN versie (7000+) laden";
+   txt_firstmenu_cedit="$txt_conf""s Editor starten";
+    txt_firstmenu_lang="Taal handmatig $txt_sel";
+    txt_firstmenu_exit="Afsluiten";
+
+# _toolchain_config_menu ###################################
+     txt_config_menu="$txt_conf $txt_menu";
+      txt_back_build="$txt_back naar $txt_bmenu_title";
+txt_module_configure="Oscam module $txt_sel";
+     txt_oscam_extra="Oscam extra's USB/PCSC $txt_sel";
+     txt_build_extra="build Extra's Compress/Patch $txt_sel";
+      txt_build_load="Laatste $txt_conf laden";
+      txt_build_save="$txt_conf bewaren";
+     txt_build_reset="$txt_conf $txt_back zetten";
+       txt_use_targz='maak .tar bestand na het compileren';
+       txt_use_patch='patch oscam voor het compileren';
+    txt_use_compress='Binaire compressie van oscam';
+
+# _toolchain_build_menu ####################################
+  txt_bmenu_user="Gebruikersnaam ";
+  txt_bmenu_comp="Compiler       ";
+  txt_bmenu_debu="Debug info     ";
+   txt_bmenu_use="GEBRUIK variabelen ";
+ txt_bmenu_build="OScam nu $txt_b1";
+txt_bmenu_config="OScam/Build $txt_conf";
+txt_bmenu_profile="beschikbare $txt_profile laden";
+txt_bmenus_profile="$txt_profile $txt_save";
+   txt_bmenu_log="Toon lastbuild.log";
+  txt_bmenu_back="$txt_back naar $txt_tc selectie";
+   txt_compress1="Bestandgrootte eerst         ";
+   txt_compress2="Bestandgrootte na            ";
+   txt_compress3="Bestandgrootte verkleind tot ";
+
+# _toolchain_main_menu#####################################
+txt_menu_builder1="Simplebuild afsluiten";
+txt_menu_builder2="Voeg nieuwe $txt_tc toe";
+txt_menu_builder3="Verwijder geïnstalleerde $txt_tc";
+txt_menu_builder4="Huidig system:";
+txt_menu_back="Naar $txt_tc $txt_menu";
+
+# _dialog_checkout
+txt_verify_syscheck='Systeem controleren       :';
+     txt_verify_svn='Huidige SVN controleren   :';
+     txt_update_svn="SVN $txt_update           :";
+    txt_prepare_svn="SVN controle voorbereiden :";
+         txt_latest="Nieuwste SVN";
+
+# _load_profile ###########################################
+  txt_select_profile_title="Beschikbare $txt_profiles";
+        txt_select_profile="Kies een $txt_profile a.u.b.";
+txt_confirm_profile_select="Bevestig a.u.b. de keuze van:";
+      txt_no_profile_found="geen $txt_profile gevonden in\n\n$profdir";
+
+# _upload_cam #############################################
+txt_upload_cam1="ssh $txt_profile bestaat niet";
+txt_upload_cam2="ssh $txt_profiles gevonden";
diff --git a/support/translation/pl b/support/translation/pl
new file mode 100644
index 0000000..39f5fe4
--- /dev/null
+++ b/support/translation/pl
@@ -0,0 +1,115 @@
+#!/bin/bash
+
+#polski
+
+txt_as='niż';
+txt_of='z';
+txt_for='dla';
+txt_b2="buduję";
+txt_to="do";
+txt_now='teraz';
+txt_b1='kompiluj';
+txt_menu='menu';
+txt_no='żaden';
+txt_name='nazwa';
+txt_use='użyj';
+txt_back='powrót';
+txt_done=' gotowe';
+txt_error='błąd';
+txt_missing='brak';
+txt_sel='wybierz';
+txt_delete='usuń';
+txt_found='znaleziono';
+txt_create='utwórz';
+txt_loading='ładuj';
+txt_profiles='profil';
+txt_conf='kofiguracja';
+txt_parameter='parametr';
+txt_extracting='rozpakuj';
+txt_wait='proszę czekać ...';
+txt_existing='istniejący';
+txt_ssh_profiles='SSH Profile';
+txt_not_found='nie znaleziono';
+txt_n_installed='nie jest zainstlowane';
+txt_back_main="$txt_back do menu głównego";
+txt_too_old='(zbyt stary nie jest obsługiwany)';
+txt_selected='wybrane';
+txt_update='aktualizacja';
+txt_example_name='przykład: dm820.stube';
+txt_save='zapisz';
+txt_filename='nazwa pliku';
+txt_LOAD="UPLOAD\przesłać";
+
+# menu txt
+txt_start_menu='menu główne';
+txt_remove_menu='usuń Toolchain';
+txt_add_menu='dodaj Toolchain';
+txt_main_revision="\n aktualna SVN REVISION to : r";
+
+# help txt
+txt_help1="zaczać z"
+txt_help2="wiersz poleceń to"
+txt_help3="[ENTER] > dalej ..."
+
+# firstmenu ################################################
+txt_firstmenu_continue="dalej z lokalnym SVN";
+   txt_firstmenu_chose="załaduj inny SVN (od 7000)";
+   txt_firstmenu_cedit="$txt_conf"" - wystartuj edytor";
+    txt_firstmenu_lang="opcje językowe";
+    txt_firstmenu_exit="zakończ Simplebuild";
+
+# _toolchain_config_menu ###################################
+     txt_config_menu="menu konfiguratora";
+      txt_back_build="$txt_back do menu kompilacji";
+txt_module_configure="$txt_sel moduły Oscam";
+     txt_oscam_extra="$txt_sel kompilacyjne extra USB/PCSC ";
+     txt_build_extra="$txt_sel kompilacyjne extra Compress/Patch";
+      txt_build_load="z$txt_loading ostatnia $txt_conf";
+      txt_build_save="$txt_save $txt_conf ";
+     txt_build_reset="resetuj konfigurację ";
+       txt_use_targz='$txt_create plik.tar po kompilacji ';
+       txt_use_patch='użyj Patch przed kompilacją';
+    txt_use_compress='spakuj binarke oscam';
+
+# _toolchain_build_menu ####################################
+  txt_bmenu_title="menu kompilacji";
+   txt_bmenu_user="nazwa usera    ";
+   txt_bmenu_comp="Compiler       ";
+   txt_bmenu_debu="Debug Info     ";
+    txt_bmenu_use="variable      ";
+  txt_bmenu_build="$txt_b1 OScam";
+ txt_bmenu_config="konfiguracja OScam/Build";
+txt_bmenu_profile="załaduj $txt_existing profil";
+txt_bmenus_profile="Profil $txt_save";
+    txt_bmenu_log="pokaż lastbuild.log";
+   txt_bmenu_back="$txt_back do wyboru Toolchain";
+    txt_compress1="wielkość pliku przed          ";
+    txt_compress2="wielkość pliku po           ";
+    txt_compress3="wielkość pliku zmniejszona do";
+
+# _toolchain_main_menu ####################################
+#txt_menu_title="menu toolchaini";
+txt_menu_builder1="zakończ Simplebuild";
+txt_menu_builder2="dodaj nowy Toolchain";
+txt_menu_builder3="usuń zainstalowany Toolchain";
+txt_menu_builder4="nativ dla";
+txt_menu_back="powrót do menu toolchain";
+
+# _dialog_checkout ########################################
+txt_verify_syscheck='sprawdzanie systemu          :';
+     txt_verify_svn='sprawdzanie istniejącego svn :';
+     txt_update_svn="$txt_update svn         :";
+    txt_prepare_svn="przygotowanie svn checkout :";
+         txt_latest="ostatni aktualny";
+
+# _load_profile ###########################################
+  txt_select_profile_title="dostępne profile";
+        txt_select_profile="wybierz profil";
+txt_confirm_profile_select="potwierdzić wybór :";
+      txt_no_profile_found="nie znaleziono profilu w\n\n$profdir";
+
+# _upload_cam #############################################
+txt_upload_cam1="SSH profil nie istnieje";
+txt_upload_cam2="SSH profil znaleziony";
+
+
diff --git a/support/translation/pt b/support/translation/pt
new file mode 100644
index 0000000..8dcc508
--- /dev/null
+++ b/support/translation/pt
@@ -0,0 +1,150 @@
+#!/bin/bash
+
+#portugues-portugal
+
+txt_create='criar em';
+txt_bmenu_user="Utilizador    ";
+txt_bmenu_comp="Compilador    ";
+txt_bmenu_debu="Informacao do Debug     ";
+txt_bmenu_acti="Opcoes Ativadas";
+txt_wait="Por favor Aguarde...";
+txt_build="Compilacao";
+txt_to="para";
+txt_lc="utilizar";
+txt_lang_select="Mudar de Lingua";
+txt_force="Forcar um MAJ rapido";
+txt_back="Voltar para o menu de escolhas da toolchain";
+txt_end="Sair do Simplebuild";
+txt_offline="Desligado";
+txt_error="Erro";
+txt_LOAD="Enviando";
+txt_DOWNLOAD="Descarregando ...";
+txt_REMOVE="Apagar";
+txt_found_in="Encontrar em";
+txt_found_in_archiv="Localizar no arquivo";
+txt_buildtime="Tempo de Compilacao";
+txt_nosvn="Nenhuma Versao SVN encontrada";
+txt_with="com";
+txt_old="Antigo";
+txt_no_stapi="sem STAPI SH4 disponivel !!!";
+txt_rm="apagado";
+txt_help1="iniciar com";
+txt_help2="os parametros das linhas de comando disponiveis sao";
+txt_help3="prime [ENTER] para continuar..."
+txt_compressor1="Escolhe o meio de compressao de binarios\n para o seu sistema de compilacao";
+txt_compressor2="resultado : ";
+txt_compressor3="detectado";
+txt_compressor4="nao detectado";
+txt_packok="esta compressado no arquivo";
+txt_packfail="nao conseguiu compressar";
+txt_rcheckout="Estructura do SVN nao encontrada ... A actualizar, Por Favor Aguarde !\n";
+txt_extra1=" Escolha as opcoes :\n [*] = Activar; [ ] = Desactivar";
+txt_extra2="Suporte dos leitores USB";
+txt_extra3="Suporte dos leitores PCSC";
+txt_extra4="Suporte do STAPI";
+txt_extra5="Suporte do COOLAPI";
+txt_extra6="Compilar as Librarias dentro do OScam";
+txt_extra7="Compactar o binario do OScam em .tar.gz";
+txt_extra8="Compressar o binario OScam com UPX";
+txt_checksys1="\n Verificacao dos ficheiros \n -------------------------\n";
+txt_checksys2="\n Verificacao dos pacotes\n -------------------------\n";
+txt_checksys3="esta instalado";
+txt_checksys4="... nao esta instalado";
+txt_checksys5="instalado ";
+txt_checksys6="... nao esta instalado";
+txt_checksys7=" encotrado em ";
+txt_cfg_path1="valor por defeito";
+txt_cfg_path2="valor actual";
+txt_cfg_path3="directorio de configuracoes";
+txt_lib_path1="directorio de librarias";
+txt_custom_suffix="deixar vazio para os valores por defeito";
+txt_online_update1="versao local";
+txt_online_update2="versao online";
+txt_online_update3="Deseja actualizar o seu SIMPLEBUILD ?";
+txt_conf_update1="versao local";
+txt_conf_update2="versao online";
+txt_conf_update3="Deseja actualizar o ficheiro CONFIG ?";
+txt_patch="utilizar o patch";
+txt_patch_off1="patch(s) encontrado(s) para supressao\n------------------------------------";
+txt_patch_off2="apagar o patch";
+txt_patch_off3="apagar";
+txt_patch_off4="ficheiro da fonte";
+txt_patch_on1="patch(s) encontrado(s) para aplicacao\n------------------------------------\n------------------------------------";
+txt_patch_on2="aplicar patch";
+txt_con_check1="Transferencia nao encontrada";
+txt_con_check2="tamanho da toolchain incorrecto. Apague e comece de novo !";
+txt_con_check3="Impossivel transferir";
+txt_configure_title="[ CONFIGURACAO ]";
+txt_configure_menu0="Configuracao";
+txt_configure_menu1="Add-ons, Protocolos, Sistemas CA, Leitores de Cartoes";
+txt_configure_menu2="Outros Parametros  (USB/PCSC/STAPI/COOL/PACK/PATCH/COMPRESS)";
+txt_configure_menu3="Mudar o directorio das configs por defeito";
+txt_configure_menu4="Mudar o directorio das librarias por defeito";
+txt_configure_menu5="Escolher o compressor do bianario";
+txt_configure_menu6="Escolher um suffixo personalizado para o binario do OSCAM";
+txt_configure_menu7="Voltar para o MENU DE COMPILACAO";
+txt_cmdline1="Verificacao da Revision ";
+txt_cmdline2="Verificacao do trunk";
+txt_cmdline3="consideracao do perfil por defeito";
+txt_cmdline4="consideracao do perfil modificado";
+txt_cmdline5="consideracao do perfil guardado";
+txt_cmdline6="perfil modificado ausente\n perfil por defeito tomado em conta (Selecionado)";
+txt_cmdline7="perfil guardado ausente\n  perfil por defeito tomado em conta (Selecionado) ";
+txt_cmd_build1="nenhum SVN correcto encontrado\n apague oscam-svn !!\n ----------------------";
+txt_cmd_build2="SVN apagado\n re-inicie o simplebuild !!\n --------------------------------------";
+txt_cmd_build3="aplicar o(s) patch(s) \n -------------------------";
+txt_cmd_build4="patch(s) encontrado(s) para serem aplicado(s)";
+txt_cmd_build5="aplicar o patch";
+txt_cmd_build6="Limpar SVN do OSCam local";
+txt_cmd_build7="Tamanho do bianario antes da compressao";
+txt_cmd_build8="Tamanho do bianario depois da compressao";
+txt_cmd_build9="Tamanho do bianario reduzido a";
+txt_cmd_build10="apagar patch\n ---------------------";
+txt_cmd_build11="patch(s) encontrado(s) para serem aplicado(s)";
+txt_cmd_build12="falha de compilacao";
+txt_cmd_build13="visionar o ficheiro build.log";
+txt_cmd_build14="apagar patch";
+txt_cmd_build_title="[ INFO Compressao ]";
+txt_b_menu_title="[ Opcoes de compilacao ]";
+txt_b_menu_options1="nenhuma Opcao activa";
+txt_b_menu1="[ MENU DE COMPILACAO ]";
+txt_b_menu2="Informacoes";
+txt_b_menu3="Configuracoes Actuais";
+txt_b_menu4="Configuracoes et Parametros do OSCam";
+txt_b_menu5="Compilar OSCam";
+txt_b_menu6="Visionar build.log";
+txt_b_menu7="Ver a configuracao do OSCam";
+txt_upload_cam1="o ficheiro de configuracao nao existe";
+txt_upload_cam2="o ficheiro config existe";
+txt_t_menu1="\n A Revisao actual do OSCam SVN é : r";
+txt_rem_chains1="Por favor escolhe a Toolchain a ser apagada";
+txt_add_chains1="ADICIONAR Toolchain";
+txt_add_chains2="Por favor escolhe a Toolchain a adicionar";
+txt_menu_builder1="Sair do Simplebuild";
+txt_menu_builder2="Nova Toolchain";
+txt_menu_builder3="Toolchain Instaladas";
+txt_menu_builder4="Nativo para";
+txt_menu_back="Voltar á seleccao da(s) Toolchain(s)";
+txt_cedit1="Apagar o binario de debug";
+txt_cedit2="Verificar as Toolchain(s) instaladas";
+txt_cedit3="Activar o sistema de Patch Automatico";
+txt_cedit4="Activar a verificacao de Actualizacoes";
+txt_cedit5="Informacoes detalhadas sobre a compilacao";
+txt_revcheck1="VERIFICACAO DAS ATUALIZACOES";
+txt_revcheck2="Verificacao da versao do OSCam SVN online\n\t\b";
+txt_revcheck3="Revisao disponivel:";
+txt_revcheck4="Insira o numero da Revisao...";
+txt_revcheck5="impossivel. SVN offline !";
+txt_revcheck6="Verificacao da versao do OSCam SVN local\n\t\b";
+txt_revsel1="com local:";
+txt_revsel2="Apagar a";
+txt_revsel3="e todos os ficheiros de configuracao";
+txt_revsel4="Editor de configuracao";
+txt_revsel5="Programa";
+txt_revsel6="Actualizar para a ultima Revisao";
+txt_options1="Editar Opcoes :";
+txt_options2="activar";
+txt_options3="activar";
+txt_options4="OK reinicie o Simplebuild";
+txt_options_title="Editor de Configuracoes";
+txt_disksvn="revisao local esta agora "
\ No newline at end of file
diff --git a/support/translation/tr b/support/translation/tr
new file mode 100644
index 0000000..464d0bf
--- /dev/null
+++ b/support/translation/tr
@@ -0,0 +1,115 @@
+#!/bin/bash 
+
+#turkish
+
+txt_as='as';
+txt_of='/';
+txt_for='için';
+txt_b2="yapı";
+txt_to="after";
+txt_now='şimdi';
+txt_b1='build';
+txt_menu='Menü';
+txt_no='none';
+txt_name='Ad';
+txt_use='kullanım';
+txt_back='geri dön';
+txt_done='hazır';
+txt_error='hata';
+txt_missing='eksik';
+txt_sel='seçmek';
+txt_delete='sil';
+txt_found='bulundu';
+txt_create='oluştur';
+txt_loading='load'; #7karakter
+txt_profile='profil';
+txt_profiles='Profiller';
+txt_conf='yapılandırma';
+txt_parameter='Parametre';
+txt_extracting='ayıklanıyor'; #10karakter
+txt_wait='lütfen bekleyin...';
+txt_existing='var';
+txt_ssh_profiles="SSH $txt_profiles";
+txt_not_found='bulunamadı';
+txt_n_installed='yüklü değil';
+txt_start_menu='Ana menü';
+txt_back_main="$txt_start_menu'ye geri dön";
+txt_too_old='(çok eski desteklenmiyor)';
+txt_selected='seçildi';
+txt_update='güncelleniyor';
+txt_example_name='Örnek:dm820.stube';
+txt_save='kayıt';
+txt_filename='dosya adı';
+txt_LOAD="UPLOAD";
+txt_tc="Toolchain";
+
+# menu txt 
+txt_start_menu='Ana menü'; 
+txt_remove_menu="$txt_tc kaldır"; 
+txt_add_menu="$txt_tc ekle"; 
+txt_main_revision="\n yerel SVN revizyonu : r";
+
+# help txt 
+txt_help1="ile başla" 
+txt_help2="komut satırıyla başlayın Parametreler" 
+txt_help3="[ENTER] ile devam eder ..." 
+
+# firstmenu #################### ########################### 
+txt_firstmenu_continue="yerel SVN ile devam et";
+   txt_firstmenu_chose="Farklı bir SVN yükle (7000+)";
+   txt_firstmenu_cedit="yapılandırma düzenleyicisini başlat"; 
+    txt_firstmenu_lang="sistem dili seç"; 
+    txt_firstmenu_exit="Simplebuild'i kapat"; 
+
+# _toolchain_config_menu ##################################### 
+     txt_config_menu="yapılandırma menüsü"; 
+      txt_back_build="menüye geri dön"; 
+txt_module_configure="oscam modüllerini seç";
+     txt_oscam_extra="USB/PCSC ekstralarını seçin"; 
+     txt_build_extra="build ekstralar sıkıştır / yama seç"; 
+      txt_build_load="son yapılandırmayı yükle"; 
+      txt_build_save="konfigürasyonu kaydet"; 
+     txt_build_reset="yapılandırmayı sıfırla";
+       txt_use_targz='oscam derlemeden sonra file.tar.gz';
+       txt_use_patch="patch yamasını oscam'a ekle";
+    txt_use_compress="Oscam'den ikili sıkıştırma";
+
+# _toolchain_build_menu ####################################
+ txt_bmenu_title="menü oluşturma"; 
+  txt_bmenu_user="kullanıcı adı        ";
+  txt_bmenu_comp="derleyici            ";
+  txt_bmenu_debu="hata ayıklama bilgisi";
+   txt_bmenu_use="USE_değişkenler     ";
+ txt_bmenu_build="şimdi oscam oluştur";
+txt_bmenu_config="oscam/build yapılandırma";
+txt_bmenu_profile="mevcut $txt_profile ile yükle";
+txt_bmenus_profile="$txt_profile $txt_save et";
+   txt_bmenu_log="göster lastbuild.log"; 
+  txt_bmenu_back="$txt_tc seçimine geri dön";
+   txt_compress1="önce dosya boyutu   ";
+   txt_compress2="sonra dosya boyutu  ";
+   txt_compress3="dosya boyutu azaldı ";
+
+# _toolchain_main_menu ###################################### 
+txt_menu_builder1="close simplebuild"; 
+txt_menu_builder2="yeni $txt_tc ekle"; 
+txt_menu_builder3="yüklü $txt_tc kaldır";
+txt_menu_builder4="mevcut yerel yapı için oluştur"; 
+txt_menu_back="$txt_tc menüsüne geri dön";
+
+# _dialog_checkout 
+txt_verify_syscheck="sistemi kontrol et          :";
+     txt_verify_svn="mevcut SVN'yi kontrol et    :";
+     txt_update_svn="$txt_update SVN           :";
+    txt_prepare_svn="SVN ödemesini hazırla    :";
+         txt_latest="en son SVN"; 
+
+# _load_profile ############################################ 
+  txt_select_profile_title="kullanılabilir profiller "; 
+        txt_select_profile="lütfen bir profil seçin"; 
+txt_confirm_profile_select="lütfen seçiminizi onaylayın:"; 
+      txt_no_profile_found="içinde profil bulunamadı\n\n$profdir";
+
+# _upload_cam ########################################### 
+txt_upload_cam1="ssh profili mevcut değil "; 
+txt_upload_cam2="ssh profili bulundu";