draft-laurie-pki-sunlight-11.txt

Network Working Group                                          B. Laurie
Internet-Draft                                                A. Langley
Intended status: Experimental                                  E. Kasper
Expires: October 18, 2013                                         Google
                                                          April 16, 2013


                        Certificate Transparency
                      draft-laurie-pki-sunlight-11

Abstract

   This document describes an experimental protocol for publicly logging
   the existence of TLS certificates as they are issued or observed, in
   a manner that allows anyone to audit certificate authority activity
   and notice the issuance of suspect certificates, as well as to audit
   the certificate logs themselves.  The intent is that eventually
   clients would refuse to honor certificates which do not appear in a
   log, effectively forcing CAs to add all issued certificates to the
   logs.

   Logs are network services which implement the protocol operations for
   submissions and queries that are defined in this document.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on October 18, 2013.

Copyright Notice

   Copyright (c) 2013 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents



Laurie, et al.          Expires October 18, 2013                [Page 1]

Internet-Draft          Certificate Transparency              April 2013


   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.












































Laurie, et al.          Expires October 18, 2013                [Page 2]

Internet-Draft          Certificate Transparency              April 2013


Table of Contents

   1.  Informal introduction  . . . . . . . . . . . . . . . . . . . .  4
     1.1.  Requirements Language  . . . . . . . . . . . . . . . . . .  5
     1.2.  Data structures  . . . . . . . . . . . . . . . . . . . . .  5
   2.  Cryptographic components . . . . . . . . . . . . . . . . . . .  6
     2.1.  Merkle Hash Trees  . . . . . . . . . . . . . . . . . . . .  6
       2.1.1.  Merkle audit paths . . . . . . . . . . . . . . . . . .  6
       2.1.2.  Merkle consistency proofs  . . . . . . . . . . . . . .  7
       2.1.3.  Example  . . . . . . . . . . . . . . . . . . . . . . .  8
       2.1.4.  Signatures . . . . . . . . . . . . . . . . . . . . . . 10
   3.  Log Format and Operation . . . . . . . . . . . . . . . . . . . 11
     3.1.  Log Entries  . . . . . . . . . . . . . . . . . . . . . . . 11
     3.2.  Structure of the Signed Certificate Timestamp  . . . . . . 14
     3.3.  Including the Signed Certificate Timestamp in the TLS
           Handshake  . . . . . . . . . . . . . . . . . . . . . . . . 15
       3.3.1.  TLS Extension  . . . . . . . . . . . . . . . . . . . . 16
     3.4.  Merkle Tree  . . . . . . . . . . . . . . . . . . . . . . . 17
     3.5.  Signed Tree Head . . . . . . . . . . . . . . . . . . . . . 18
   4.  Log Client Messages  . . . . . . . . . . . . . . . . . . . . . 19
     4.1.  Add Chain to Log . . . . . . . . . . . . . . . . . . . . . 19
     4.2.  Add PreCertChain to Log  . . . . . . . . . . . . . . . . . 20
     4.3.  Retrieve Latest Signed Tree Head . . . . . . . . . . . . . 20
     4.4.  Retrieve Merkle Consistency Proof between two Signed
           Tree Heads . . . . . . . . . . . . . . . . . . . . . . . . 20
     4.5.  Retrieve Merkle Audit Proof from Log by Leaf Hash  . . . . 21
     4.6.  Retrieve Entries from Log  . . . . . . . . . . . . . . . . 21
     4.7.  Retrieve Accepted Root Certificates  . . . . . . . . . . . 22
     4.8.  Retrieve Entry+Merkle Audit Proof from Log . . . . . . . . 22
   5.  Clients  . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
     5.1.  Submitters . . . . . . . . . . . . . . . . . . . . . . . . 24
     5.2.  TLS Client . . . . . . . . . . . . . . . . . . . . . . . . 24
     5.3.  Monitor  . . . . . . . . . . . . . . . . . . . . . . . . . 24
     5.4.  Auditor  . . . . . . . . . . . . . . . . . . . . . . . . . 25
   6.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 26
   7.  Security Considerations  . . . . . . . . . . . . . . . . . . . 27
     7.1.  Misissued Certificates . . . . . . . . . . . . . . . . . . 27
     7.2.  Detection of Misissue  . . . . . . . . . . . . . . . . . . 27
     7.3.  Misbehaving logs . . . . . . . . . . . . . . . . . . . . . 27
   8.  Efficiency Considerations  . . . . . . . . . . . . . . . . . . 29
   9.  Future Changes . . . . . . . . . . . . . . . . . . . . . . . . 30
   10. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 31
   11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 32
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 34







Laurie, et al.          Expires October 18, 2013                [Page 3]

Internet-Draft          Certificate Transparency              April 2013


1.  Informal introduction

   Certificate Transparency aims to mitigate the problem of misissued
   certificates by providing publicly auditable, append-only, untrusted
   logs of all issued certificates.  The logs are publicly auditable so
   that it is possible for anyone to verify the correctness of each log,
   and to monitor when new certificates are added to it.  The logs do
   not themselves prevent misissue, but they ensure that interested
   parties (particularly those named in certificates) can detect such
   misissuance.  Note that this is a general mechanism, but in this
   document we only describe its use for public TLS server certificates
   issued by public certificate authorities (CAs).

   Each log consists of certificate chains, which can be submitted by
   anyone.  It is expected that public CAs will contribute all their
   newly-issued certificates to one or more logs; it is also expected
   that certificate holders will contribute their own certificate
   chains.  In order to avoid logs being spammed into uselessness, it is
   required that each chain is rooted in a known CA certificate.  When a
   chain is submitted to a log, a signed timestamp is returned, which
   can later be used to provide evidence to clients that the chain has
   been submitted.  TLS clients can thus require that all certificates
   they see have been logged.

   Those who are concerned about misissue can monitor the logs, asking
   them regularly for all new entries, and can thus check whether
   domains they are responsible for have had certificates issued that
   they did not expect.  What they do with this information,
   particularly when they find that a misissuance has happened, is
   beyond the scope of this document, but broadly speaking they can
   invoke existing business mechanisms for dealing with misissued
   certificates.  Of course, anyone who wants can monitor the logs, and
   if they believe a certificate is incorrectly issued, take action as
   they see fit.

   Similarly, those who have seen signed timestamps from a particular
   log can later demand a proof of inclusion from that log.  If the log
   is unable to provide this (or, indeed, if the corresponding
   certificate is absent from monitors' copies of that log), that is
   evidence of the incorrect operation of the log.  The checking
   operation is asynchronous to allow TLS connections to proceed without
   delay, despite network connectivity issues and the vagaries of
   firewalls.

   The append-only property of each log is technically achieved using
   Merkle Trees, which can be used to show that any particular version
   of the log is a superset of any particular previous version.
   Likewise, Merkle Trees avoid the need to blindly trust logs: if a log



Laurie, et al.          Expires October 18, 2013                [Page 4]

Internet-Draft          Certificate Transparency              April 2013


   attempts to show different things to different people, this can be
   efficiently detected by comparing tree roots and consistency proofs.
   Similarly, other misbehaviours of any log (e.g., issuing signed
   timestamps for certificates they then don't log) can be efficiently
   detected and proved to the world at large.

1.1.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].

1.2.  Data structures

   Data structures are defined according to the conventions laid out in
   section 4 of [RFC5246].



































Laurie, et al.          Expires October 18, 2013                [Page 5]

Internet-Draft          Certificate Transparency              April 2013


2.  Cryptographic components

2.1.  Merkle Hash Trees

   Logs use a binary Merkle hash tree for efficient auditing.  The
   hashing algorithm is SHA-256 [FIPS.180-2.2002] (note that this is
   fixed for this experiment but it is anticipated that each log would
   be able to specify a hash algorithm).  The input to the Merkle Tree
   Hash is a list of data entries; these entries will be hashed to form
   the leaves of the Merkle hash tree.  The output is a single 32-byte
   Merkle Tree Hash.  Given an ordered list of n inputs, D[n] = {d(0),
   d(1), ..., d(n-1)}, the Merkle Tree Hash (MTH) is thus defined as
   follows:

   The hash of an empty list is the hash of an empty string:

   MTH({}) = SHA-256().

   The hash of a list with one entry (also known as a leaf hash) is:

   MTH({d(0)}) = SHA-256(0x00 || d(0)).

   For n > 1, let k be the largest power of two smaller than n (i.e., k
   < n <= 2k).  The Merkle Tree Hash of an n-element list D[n] is then
   defined recursively as

   MTH(D[n]) = SHA-256(0x01 || MTH(D[0:k]) || MTH(D[k:n])),

   where || is concatenation and D[k1:k2] denotes the list {d(k1),
   d(k1+1),..., d(k2-1)} of length (k2 - k1).  (Note that the hash
   calculation for leaves and nodes differ.  This domain separation is
   required to give second preimage resistance.)

   Note that we do not require the length of the input list to be a
   power of two.  The resulting Merkle tree may thus not be balanced,
   however, its shape is uniquely determined by the number of leaves.
   [This Merkle tree is essentially the same as the history tree
   [CrosbyWallach] proposal, except our definition handles non-full
   trees differently.]

2.1.1.  Merkle audit paths

   A Merkle audit path for a leaf in a Merkle hash tree is the shortest
   list of additional nodes in the Merkle tree required to compute the
   Merkle Tree Hash for that tree.  Each node in the tree is either a
   leaf node, or is computed from the two nodes immediately below it
   (i.e., towards the leaves).  At each step up the tree (towards the
   root), a node from the audit path is combined with the node computed



Laurie, et al.          Expires October 18, 2013                [Page 6]

Internet-Draft          Certificate Transparency              April 2013


   so far.  In other words, the audit path consists of the list of
   missing nodes required to compute the nodes leading from a leaf to
   the root of the tree.  If the root computed from the audit path
   matches the true root, then the audit path is proof that the leaf
   exists in the tree.

   Given an ordered list of n inputs to the tree, D[n] = {d(0), ...,
   d(n-1)}, the Merkle audit path PATH(m, D[n]) for the (m+1)th input
   d(m), 0 <= m < n, is defined as follows:

   The path for the single leaf in a tree with a one-element input list
   D[1] = {d(0)} is empty:

   PATH(0, {d(0)}) = {}

   For n > 1, let k be the largest power of two smaller than n.  The
   path for the (m+1)th element d(m) in a list of n > m elements is then
   defined recursively as

   PATH(m, D[n]) = PATH(m, D[0:k]) : MTH(D[k:n]) for m < k; and

   PATH(m, D[n]) = PATH(m - k, D[k:n]) : MTH(D[0:k]) for m >= k,

   where : is concatenation of lists and D[k1:k2] denotes the length (k2
   - k1) list {d(k1), d(k1+1),..., d(k2-1)} as before.

2.1.2.  Merkle consistency proofs

   Merkle consistency proofs prove the append-only property of the tree.
   A Merkle consistency proof for a Merkle Tree Hash MTH(D[n]) and a
   previously advertised hash MTH(D[0:m]) of the first m leaves, m <= n,
   is the list of nodes in the Merkle tree required to verify that the
   first m inputs D[0:m] are equal in both trees.  Thus, a consistency
   proof must contain a set of intermediate nodes (i.e., commitments to
   inputs) sufficient to verify MTH(D[n]), such that (a subset of) the
   same nodes can be used to verify MTH(D[0:m]).  We define an algorithm
   that outputs the (unique) minimal consistency proof.

   Given an ordered list of n inputs to the tree, D[n] = {d(0), ...,
   d(n-1)}, the Merkle consistency proof PROOF(m, D[n]) for a previous
   Merkle Tree Hash MTH(D[0:m]), 0 < m < n, is defined as:

   PROOF(m, D[n]) = SUBPROOF(m, D[n], true)

   The subproof for m = n is empty if m is the value for which PROOF was
   originally requested (meaning that the subtree Merkle Tree Hash
   MTH(D[0:m]) is known):




Laurie, et al.          Expires October 18, 2013                [Page 7]

Internet-Draft          Certificate Transparency              April 2013


   SUBPROOF(m, D[m], true) = {}

   The subproof for m = n is the Merkle Tree Hash committing inputs
   D[0:m] otherwise:

   SUBPROOF(m, D[m], false) = {MTH(D[m])}

   For m < n, let k be the largest power of two smaller than n.  The
   subproof is then defined recursively.

   If m <= k, the right subtree entries D[k:n] only exist in the current
   tree.  We prove that the left subtree entries D[0:k] are consistent
   and add a commitment to D[k:n]:

   SUBPROOF(m, D[n], b) = SUBPROOF(m, D[0:k], b) : MTH(D[k:n]).

   If m > k, the left subtree entries D[0:k] are identical in both
   trees.  We prove that the right subtree entries D[k:n] are consistent
   and add a commitment to D[0:k].

   SUBPROOF(m, D[n], b) = SUBPROOF(m - k, D[k:n], false) : MTH(D[0:k]).

   Here : is concatenation of lists and D[k1:k2] denotes the length (k2
   - k1) list {d(k1), d(k1+1),..., d(k2-1)} as before.

   The number of nodes in the resulting proof is bounded above by
   ceil(log2(n)) + 1.

2.1.3.  Example

   The binary Merkle tree with 7 leaves:

               hash
              /    \
             /      \
            /        \
           /          \
          /            \
         k              l
        / \            / \
       /   \          /   \
      /     \        /     \
     g       h      i      j
    / \     / \    / \     |
    a b     c d    e f     d6
    | |     | |    | |
   d0 d1   d2 d3  d4 d5




Laurie, et al.          Expires October 18, 2013                [Page 8]

Internet-Draft          Certificate Transparency              April 2013


   The audit path for d0 is [b, h, l].

   The audit path for d3 is [c, g, l].

   The audit path for d4 is [f, j, k].

   The audit path for d6 is [i, k].

   The same tree, built incrementally in four steps:

       hash0          hash1=k
       / \              /  \
      /   \            /    \
     /     \          /      \
     g      c         g       h
    / \     |        / \     / \
    a b     d2       a b     c d
    | |              | |     | |
   d0 d1            d0 d1   d2 d3

             hash2                    hash
             /  \                    /    \
            /    \                  /      \
           /      \                /        \
          /        \              /          \
         /          \            /            \
        k            i          k              l
       / \          / \        / \            / \
      /   \         e f       /   \          /   \
     /     \        | |      /     \        /     \
    g       h      d4 d5    g       h      i      j
   / \     / \             / \     / \    / \     |
   a b     c d             a b     c d    e f     d6
   | |     | |             | |     | |    | |
   d0 d1   d2 d3           d0 d1   d2 d3  d4 d5

   The consistency proof between hash0 and hash is PROOF(3, D[7]) = [c,
   d, g, l]. c, g are used to verify hash0, and d, l are additionally
   used to show hash is consistent with hash0.

   The consistency proof between hash1 and hash is PROOF(4, D[7]) = [l].
   hash can be verified, using hash1=k and l.

   The consistency proof between hash2 and hash is PROOF(6, D[7]) = [i,
   j, k]. k, i are used to verify hash2, and j is additionally used to
   show hash is consistent with hash2.





Laurie, et al.          Expires October 18, 2013                [Page 9]

Internet-Draft          Certificate Transparency              April 2013


2.1.4.  Signatures

   Various data structures are signed.  A log MUST use either elliptic
   curve signatures using the NIST P-256 curve (section D.1.2.3 of DSS
   [DSS]) or RSA signatures (RSASSA-PKCS1-V1_5 with SHA-256, section 8.2
   of [RFC3447]) using a key of at least 2048 bits.













































Laurie, et al.          Expires October 18, 2013               [Page 10]

Internet-Draft          Certificate Transparency              April 2013


3.  Log Format and Operation

   Anyone can submit certificates to certificate logs for public
   auditing, however, since certificates will not be accepted by TLS
   clients unless logged, it is expected that certificate owners or
   their CAs will usually submit them.  A log is a single, ever-growing,
   append-only Merkle Tree of such certificates.

   When a valid certificate is submitted to a log, the log MUST
   immediately return a Signed Certificate Timestamp (SCT).  The SCT is
   the log's promise to incorporate the certificate in the Merkle Tree
   within a fixed amount of time known as the Maximum Merge Delay (MMD).
   If the log has previously seen the certificate, it MAY return the
   same SCT as it returned before.  TLS servers MUST present an SCT from
   one or more logs to the TLS client together with the certificate.
   TLS clients MUST reject certificates that do not have a valid SCT for
   the end-entity certificate.

   Periodically, each log appends all its new entries to the Merkle
   Tree, and signs the root of the tree.  Auditors can thus verify that
   each certificate for which an SCT has been issued indeed appears in
   the log.  The log MUST incorporate a certificate in its Merkle Tree
   within the Maximum Merge Delay period after the issuance of the SCT.

   Log operators MUST NOT impose any conditions on retrieving or sharing
   data from the log.

3.1.  Log Entries

   Anyone can submit a certificate to any log.  In order to enable
   attribution of each logged certificate to its issuer, the log SHALL
   publish a list of acceptable root certificates (this list might
   usefully be the union of root certificates trusted by major browser
   vendors).  Each submitted certificate MUST be accompanied by all
   additional certificates required to verify the certificate chain up
   to an accepted root certificate.  The root certificate itself MAY be
   omitted from the chain submitted to the log server.

   Alternatively, (root as well as intermediate) Certificate Authorities
   may submit a certificate to logs prior to issuance.  To do so, the CA
   submits a Precertificate that the log can use to create an entry that
   will be valid against the issued certificate.  The Precertificate is
   constructed from the certificate to be issued by adding a special
   critical poison extension (OID 1.3.6.1.4.1.11129.2.4.3, whose
   extnValue OCTET STRING contains ASN.1 NULL data (0x05 0x00)) to the
   end entity TBSCertificate (this extension is to ensure that the
   Precertificate cannot be validated by a standard X.509v3 client), and
   signing the resulting TBSCertificate [RFC5280] with either



Laurie, et al.          Expires October 18, 2013               [Page 11]

Internet-Draft          Certificate Transparency              April 2013


   o  a special-purpose (CA:true, Extended Key Usage: Certificate
      Transparency, OID 1.3.6.1.4.1.11129.2.4.4) Precertificate Signing
      Certificate.  The Precertificate Signing Certificate MUST be
      directly certified by the (root or intermediate) CA certificate
      that will ultimately sign the end entity TBSCertificate yielding
      the end entity certificate (note that the log may relax standard
      validation rules to allow this, so long as the issued certificate
      will be valid),

   o  or, the CA certificate that will sign the final certificate.

   As above, the Precertificate submission MUST be accompanied by the
   Precertificate Signing Certificate, if used, and all additional
   certificates required to verify the chain up to an accepted root
   certificate.  The signature on the TBSCertificate indicates the
   Certificate Authority's intent to issue a certificate.  This intent
   is considered binding (i.e., misissuance of the Precertificate is
   considered equal to misissuance of the final certificate).  Each log
   verifies the Precertificate signature chain, and issues a Signed
   Certificate Timestamp on the corresponding TBSCertificate.

   Logs MUST verify that the submitted end entity certificate or
   Precertificate has a valid signature chain leading back to a trusted
   root CA certificate, using the chain of intermediate CA certificates
   provided by the submitter.  Logs MAY accept certificates that have
   expired, are not yet valid, have been revoked or are otherwise not
   fully valid according to X.509 verification rules in order to
   accommodate quirks of CA certificate issuing software.  However, logs
   MUST refuse to publish certificates without a valid chain to a known
   root CA.  If a certificate is accepted and an SCT issued, the
   accepting log MUST store the entire chain used for verification
   including the certificate or Precertificate itself, and including the
   root certificate used to verify the chain (even if it was omitted
   from the submission) and MUST present this chain for auditing upon
   request.  This chain is required to prevent a CA avoiding blame by
   logging a partial or empty chain [Note: this effectively excludes
   self-signed and DANE-based certificates until some mechanism to
   control spam for those certificates is found - the authors welcome
   suggestions].

   Each certificate entry in a log MUST include the following
   components:









Laurie, et al.          Expires October 18, 2013               [Page 12]

Internet-Draft          Certificate Transparency              April 2013


       enum { x509_entry(0), precert_entry(1), (65535) } LogEntryType;

       struct {
           LogEntryType entry_type;
           select (entry_type) {
               case x509_entry: X509ChainEntry;
               case precert_entry: PrecertChainEntry;
           } entry;
       } LogEntry;

       opaque ASN.1Cert<1..2^24-1>;

       struct {
           ASN.1Cert leaf_certificate;
           ASN.1Cert certificate_chain<0..2^24-1>;
       } X509ChainEntry;

       struct {
           ASN.1Cert pre_certificate;
           ASN.1Cert precertificate_chain<0..2^24-1>;
       } PrecertChainEntry;

   Logs MAY limit the length of chain they will accept.

   "entry_type" is the type of this entry.  Future revisions of this
   protocol version may add new LogEntryType values.  Section 4 explains
   how clients should handle unknown entry types.

   "leaf_certificate" is the end-entity certificate submitted for
   auditing.

   "certificate_chain" is a chain of additional certificates required to
   verify the end entity certificate.  The first certificate MUST
   certify the end entity certificate.  Each following certificate MUST
   directly certify the one preceding it.  The final certificate MUST be
   a root certificate accepted by the log.

   "pre_certificate" is the Precertificate submited for auditing.

   "precertificate_chain" is a chain of additional certificates required
   to verify the Precertificate submission.  The first certificate MAY
   be a valid Precertificate Signing Certificate, and MUST certify the
   first certificate.  Each following certificate MUST directly certify
   the one preceding it.  The final certificate MUST be a root
   certificate accepted by the log.






Laurie, et al.          Expires October 18, 2013               [Page 13]

Internet-Draft          Certificate Transparency              April 2013


3.2.  Structure of the Signed Certificate Timestamp

       enum { certificate_timestamp(0), tree_hash(1), (255) }
         SignatureType;

       enum { v1(0), (255) }
         Version;

         struct {
             opaque key_id[32];
         } LogID;

         opaque TBSCertificate<1..2^16-1>;

         struct {
           opaque issuer_key_hash[32];
           TBSCertificate tbs_certificate;
         } PreCert;

         opaque CtExtensions<0..2^16-1>;

   "key_id" is the SHA-256 hash of the log's public key, calculated over
   the DER encoding of the key represented as SubjectPublicKeyInfo.

   "issuer_key_hash" is the SHA-256 hash of the certificate issuer's
   public key, calculated over the DER encoding of the key represented
   as SubjectPublicKeyInfo.  This is needed to bind the issuer to the
   final certificate.

   "tbs_certificate" is the DER encoded TBSCertificate (see [RFC5280])
   component of the Precertificate - that is, without the signature and
   the poison extension.  If the Precertificate is not signed with the
   CA certificate that will issue the final certificate, then the
   TBSCertificate also has its issuer changed to that of the CA that
   will issue the final certificate.  Note that it is also possible to
   reconstruct this TBSCertificate from the final certificate by
   extracting the TBSCertificate from it and deleting the SCT extension.
   Also note that since the TBSCertificate contains an
   AlgorithmIdentifier that must match both the pre-certificate
   signature algorithm and final certificate signature algorithm, they
   must be signed with the same algorithm and parameters.  If the
   Precertificate is issued using a Precertificate Signing Certificate,
   and an Authority Key Identifier extension is present in the
   TBSCertificate, the corresponding extension must also be present in
   the Precertificate Signing Certificate - in this case, the
   TBSCertificate also has its Authority Key Identifier changed to match
   the final issuer.




Laurie, et al.          Expires October 18, 2013               [Page 14]

Internet-Draft          Certificate Transparency              April 2013


       struct {
           Version sct_version;
           LogID id;
           uint64 timestamp;
           CtExtensions extensions;
           digitally-signed struct {
               Version sct_version;
               SignatureType signature_type = certificate_timestamp;
               uint64 timestamp;
               LogEntryType entry_type;
               select(entry_type) {
                   case x509_entry: ASN.1Cert;
                   case precert_entry: PreCert;
               } signed_entry;
              CtExtensions extensions;
           };
       } SignedCertificateTimestamp;

   The encoding of the digitally-signed element is defined in [RFC5246].

   "sct_version" is the version of the protocol the SCT conforms to.
   This version is v1.

   "timestamp" is the current NTP Time [RFC5905], measured since the
   epoch (January 1, 1970, 00:00), ignoring leap seconds, in
   milliseconds.

   "entry_type" may be implicit from the context in which the SCT is
   presented.

   "signed_entry" is the "leaf_certificate" (in case of an
   X509ChainEntry), or is the PreCert (in case of a PrecertChainEntry),
   as described above.

   "extensions" are future extensions to this protocol version (v1).
   Currently, no extensions are specified.

3.3.  Including the Signed Certificate Timestamp in the TLS Handshake

   The SCT data corresponding to the end entity certificate from at
   least one log must be included in the TLS handshake, either by using
   an X509v3 certificate extension as described below, by using a TLS
   Extension (section 7.4.1.4 of [RFC5246]) with type [TBD], or by using
   OCSP Stapling (section 8 of [RFC6066]), where the response includes
   an OCSP extension with OID 1.3.6.1.4.1.11129.2.4.5 (see [RFC2560])
   and body:

       SignedCertificateTimestampList ::= OCTET STRING



Laurie, et al.          Expires October 18, 2013               [Page 15]

Internet-Draft          Certificate Transparency              April 2013


   At least one SCT MUST be included.  Server operators MAY include more
   than one SCT.

   Similarly, a Certificate Authority MAY submit a precertificate to
   more than one log, and all obtained SCTs can be directly embedded in
   the final certificate, by encoding the SignedCertificateTimestampList
   structure as an ASN.1 OCTET STRING and inserting the resulting data
   in the TBSCertificate as an X.509v3 certificate extension (OID
   1.3.6.1.4.1.11129.2.4.2).  Upon receiving the certificate, clients
   can reconstruct the original TBSCertificate to verify the SCT
   signature.

   The contents of the ASN.1 OCTET STRING embedded in an OCSP extension
   or X509v3 certificate extension are as follows:

        opaque SerializedSCT<1..2^16-1>;

        struct {
            SerializedSCT sct_list <1..2^16-1>;
        } SignedCertificateTimestampList;

   Here "SerializedSCT" is an opaque bytestring that contains the
   serialized TLS structure.  This encoding ensures that TLS clients can
   decode each SCT individually (i.e., if there is a version upgrade,
   out of date clients can still parse old SCTs while skipping over new
   SCTs whose version they don't understand).

   Likewise, SCTs can be embedded in a TLS Extension.  See below for
   details.

   TLS clients MUST implement all three mechanisms.  Servers MUST
   implement at least one of the three mechanisms.  Note that existing
   TLS servers can generally use the certificate extension mechanism
   without modification.

   TLS servers should send SCTs from multiple logs in case one or more
   logs is not acceptable to the client (for example, if a log has been
   struck off for misbehaviour or has had a key compromise).

3.3.1.  TLS Extension

   The SCT can be sent during the TLS handshake using a TLS extension,
   type [TBD].

   Clients that support the extension SHOULD send a ClientHello
   extension with the appropriate type and empty "extension_data".

   Servers MUST only send SCTs to clients who have indicated support for



Laurie, et al.          Expires October 18, 2013               [Page 16]

Internet-Draft          Certificate Transparency              April 2013


   the extension in the ClientHello, in which case the SCTs are sent by
   setting the "extension_data" to a "SignedCertificateTimestampList".

   Session resumption uses the original session information: clients
   SHOULD include the extension type in the ClientHello but if the
   session is resumed, the server is not expected to process it or
   include the extension in the ServerHello.

3.4.  Merkle Tree

   The hashing algorithm for the Merkle Tree Hash is SHA-256.

   Structure of the Merkle Tree input:

       enum { timestamped_entry(0), (255) }
         MerkleLeafType;

       struct {
           uint64 timestamp;
           LogEntryType entry_type;
           select(entry_type) {
               case x509_entry: ASN.1Cert;
               case precert_entry: PreCert;
           } signed_entry;
           CtExtensions extensions;
       } TimestampedEntry;

       struct {
           Version version;
           MerkleLeafType leaf_type;
           select (leaf_type) {
               case timestamped_entry: TimestampedEntry;
           }
       } MerkleTreeLeaf;

   Here "version" is the version of the protocol the MerkleTreeLeaf
   corresponds to.  This version is v1.

   "leaf_type" is the type of the leaf input.  Currently, only
   "timestamped_entry" (corresponding to an SCT) is defined.  Future
   revisions of this protocol version may add new MerkleLeafType types.
   Section 4 explains how clients should handle unknown leaf types.

   "timestamp" is the timestamp of the corresponding SCT issued for this
   certificate.

   "signed_entry" is the "signed_entry" of the corresponding SCT.




Laurie, et al.          Expires October 18, 2013               [Page 17]

Internet-Draft          Certificate Transparency              April 2013


   "extensions" are "extensions" of the corresponding SCT.

   The leaves of the Merkle Tree are the leaf hashes of the
   corresponding "MerkleTreeLeaf" structures.

3.5.  Signed Tree Head

   Every time a log appends new entries to the tree, the log SHOULD sign
   the corresponding tree hash and tree information (see the
   corresponding Signed Tree Head client message in Section 4.3).  The
   signature for that data is structured as follows:


       digitally-signed struct {
           Version version;
           SignatureType signature_type = tree_hash;
           uint64 timestamp;
           uint64 tree_size;
           opaque sha256_root_hash[32];
       } TreeHeadSignature;

   "version" is the version of the protocol the TreeHeadSignature
   conforms to.  This version is v1.

   "timestamp" is the current time.  The timestamp MUST be at least as
   recent as the most recent SCT timestamp in the tree.  Each subsequent
   timestamp MUST be more recent than the timestamp of the previous
   update.

   "tree_size" equals the number of entries in the new tree.

   "sha256_root_hash" is the root of the Merkle Hash Tree.

   Each log MUST produce on demand a Signed Tree Head that is no older
   than the Maximum Merge Delay.  In the unlikely event that it receives
   no new submissions during an MMD period, the log SHALL sign the same
   Merkle Tree Hash with a fresh timestamp.














Laurie, et al.          Expires October 18, 2013               [Page 18]

Internet-Draft          Certificate Transparency              April 2013


4.  Log Client Messages

   Messages are sent as HTTPS GET or POST requests.  Parameters for
   POSTs and all responses are encoded as JSON objects [RFC4627].
   Parameters for GETs are encoded as order independent key/value URL
   parameters, using the "application/x-www-form-urlencoded" format
   described in the "HTML 4.01 Specification" [HTML401].  Binary data is
   base64 encoded [RFC4648] as specified in the individual messages.

   Note that JSON objects and URL parameters may contain fields not
   specified here.  These extra fields should be ignored.

   The <log server> prefix can include a path as well as a server name
   and a port.

   In general, where needed, the "version" is v1 and the "id" is the log
   id for the log server queried.

   Any errors will be returned as HTTP 4xx or 5xx responses, with human
   readable error messages.

4.1.  Add Chain to Log

   POST https://<log server>/ct/v1/add-chain

   Inputs

   chain  An array of base64 encoded certificates.  The first element is
      the end entity certificate, the second chains to the first and so
      on to the last, which is either the root certificate or a
      certificate that chains to a known root certificate.

   Outputs

   sct_version  The version of the SignedCertificateTimestamp structure,
      in decimal.  A compliant v1 implementation MUST NOT expect this to
      be 0 (i.e., v1).

   id The log ID, base64 encoded.  Since log clients who request an SCT
      for inclusion in TLS handshakes are not required to verify it, we
      do not assume they know the ID of the log.

   timestamp  The SCT timestamp, in decimal.

   extensions  An opaque type for future expansion.  It is likely that
      not all participants will need to understand data in this field.
      Logs should set this to the empty string.  Clients should decode
      the base64 encoded data and include it in the SCT.



Laurie, et al.          Expires October 18, 2013               [Page 19]

Internet-Draft          Certificate Transparency              April 2013


   signature  The SCT signature, base64 encoded.

   If the "sct_version" is not v1, then a v1 client may be unable to
   verify the signature.  It MUST NOT construe this as an error.  [Note:
   log clients don't need to be able to verify this structure, only TLS
   clients do - if we were to serve the structure binary, then we could
   completely change it without requiring an upgrade to v1 clients].

4.2.  Add PreCertChain to Log

   POST https://<log server>/ct/v1/add-pre-chain

   Inputs

   chain  An array of base64 encoded precertificates.  The first element
      is the end entity certificate, the second chains to the first and
      so on to the last, which is either the root certificate or a
      certificate that chains to a known root certificate.

   Outputs are the same as Section 4.1.

4.3.  Retrieve Latest Signed Tree Head

   GET https://<log server>/ct/v1/get-sth

   No inputs.

   Outputs

   tree_size  The size of the tree, in entries, in decimal.

   timestamp  The timestamp, in decimal.

   sha256_root_hash  The Merkle Tree Hash of the tree, in base64.

   tree_head_signature  A TreeHeadSignature for the above data.

4.4.  Retrieve Merkle Consistency Proof between two Signed Tree Heads

   GET https://<log server>/ct/v1/get-sth-consistency

   Inputs

   first  The tree_size of the first tree, in decimal.







Laurie, et al.          Expires October 18, 2013               [Page 20]

Internet-Draft          Certificate Transparency              April 2013


   second  The tree_size of the second tree, in decimal.

   Both tree sizes must be from existing v1 STHs (Signed Tree Heads).

   Outputs

   consistency  An array of Merkle tree nodes, base64 encoded.

   Note that no signature is required on this data, as it is used to
   verify an STH, which is signed.

4.5.  Retrieve Merkle Audit Proof from Log by Leaf Hash

   GET https://<log server>/ct/v1/get-proof-by-hash

   Inputs

   hash  A base64 encoded v1 leaf hash.

   tree_size  The tree_size of the tree to base the proof on, in
      decimal.

   The "hash" must be calculated as defined in Section 3.4.  The
   "tree_size" must designate an existing v1 STH.

   Outputs

   leaf_index  The 0-based index of the end entity corresponding to the
      "hash" parameter.

   audit_path  An array of base64 encoded Merkle tree nodes proving the
      inclusion of the chosen certificate.

4.6.  Retrieve Entries from Log

   GET https://<log server>/ct/v1/get-entries

   Inputs

   start  0-based index of first entry to retrieve, in decimal.

   end  0-based index of last entry to retrieve, in decimal.

   Outputs







Laurie, et al.          Expires October 18, 2013               [Page 21]

Internet-Draft          Certificate Transparency              April 2013


   entries  An array of objects, each consisting of

      leaf_input  The base64-encoded MerkleTreeLeaf structure.

      extra_data  The base64-encoded unsigned data pertaining to the log
         entry.  In the case of an X509ChainEntry, this is the
         "certificate_chain".  In the case of a PrecertChainEntry, this
         is the whole "PrecertChainEntry".

   Note that this message is not signed - the retrieved data can be
   verified by constructing the Merkle Tree Hash corresponding to a
   retrieved STH.  All leaves MUST be v1.  However, a compliant v1
   client MUST NOT construe an unrecognized MerkleLeafType or
   LogEntryType value as an error.  This means it may be unable to parse
   some entries, but note that each client can inspect the entries it
   does recognize, as well as verify the integrity of the data by
   treating unrecognized leaves as opaque input to the tree.

   The "start" and "end" parameters SHOULD be within the range 0 <= x <
   "tree_size" as returned by "get-sth" in Section 4.3.

   Logs MAY honour requests where 0 <= "start" < "tree_size", and "end"
   >= "tree_size" by returning a partial response covering only the
   valid entries in the specified range.  Note that the following
   restriction may also apply:

   Logs MAY restrict the number of entries which can be retrieved per
   "get-entries" request.  If a client requests more than the permitted
   number of entries, the log SHALL return the maximum number of entries
   permissible.  These entries SHALL be sequential beginning with the
   entry specified by "start".

4.7.  Retrieve Accepted Root Certificates

   GET https://<log server>/ct/v1/get-roots

   No inputs.

   Outputs

   certificates  An array of base64 encoded root certificates that are
      acceptable to the log.

4.8.  Retrieve Entry+Merkle Audit Proof from Log

   GET https://<log server>/ct/v1/get-entry-and-proof

   Inputs



Laurie, et al.          Expires October 18, 2013               [Page 22]

Internet-Draft          Certificate Transparency              April 2013


   leaf_index  The index of the desired entry.

   tree_size  The tree_size of the tree for which the proof is desired.

   The tree size must designate an existing STH.

   Outputs

   leaf_input  The base64-encoded MerkleTreeLeaf structure.

   extra_data  The base64-encoded unsigned data, same as in Section 4.6.

   audit_path  An array of base64 encoded Merkle tree nodes proving the
      inclusion of the chosen certificate.

   This API is probably only useful for debugging.



































Laurie, et al.          Expires October 18, 2013               [Page 23]

Internet-Draft          Certificate Transparency              April 2013


5.  Clients

   There are various different functions clients of logs might perform.
   We describe here some typical clients and how they could function.
   Any inconsistency may be used as evidence that a log has not behaved
   correctly, and the signatures on the data structures prevent the log
   from denying that misbehaviour.

   All clients should gossip with each other, exchanging STHs at least:
   this is all that is required to ensure that they all have a
   consistent view.  The exact mechanism for gossip will be described in
   an separate document, but it is expected there will be a variety.

5.1.  Submitters

   Submitters submit certificates or precertificates to the log as
   described above.  They may go on to use the returned SCT to construct
   a certificate or use it directly in a TLS handshake.

5.2.  TLS Client

   TLS clients are not directly clients of the log, but they receive
   SCTs alongside or in server certificates.  In addition to normal
   validation of the certificate and its chain, they should validate the
   SCT by computing the signature input from the SCT data as well as the
   certificate, and verifying the signature, using the corresponding
   log's public key.  Note that this document does not describe how
   clients obtain the logs' public keys.

   TLS clients MUST reject SCTs whose timestamp is in the future.

5.3.  Monitor

   Monitors watch logs and check that they behave correctly.  They also
   watch for certificates of interest.

   A monitor needs to, at least, inspect every new entry in each log it
   watches.  It may also want to keep copies of entire logs.  In order
   to do this, it should follow these steps for each log:

   1.  Fetch the current STH using Section 4.3.

   2.  Verify the STH signature.

   3.  Fetch all the entries in the tree corresponding to the STH using
       Section 4.6.





Laurie, et al.          Expires October 18, 2013               [Page 24]

Internet-Draft          Certificate Transparency              April 2013


   4.  Confirm that the tree made from the fetched entries produces the
       same hash as that in the STH.

   5.  Fetch the current STH using Section 4.3.  Repeat until STH
       changes.

   6.  Verify the STH signature.

   7.  Fetch all the new entries in the tree corresponding to the STH
       using Section 4.6.  If they remain unavailable for an extended
       period, then this should be viewed as misbehaviour on the part of
       the log.

   8.  Either:

       1.  Verify that the updated list of all entries generates a tree
           with the same hash as the new STH.

       Or, if it is not keeping all log entries:

       2.  Fetch a consistency proof for the new STH with the previous
           STH using Section 4.4.

       3.  Verify the consistency proof.

       4.  Verify that the new entries generate the corresponding
           elements in the consistency proof.

   9.  Go to Step 5.

5.4.  Auditor

   Auditors take partial information about a log as input and verify
   that this information is consistent with other partial information
   they have.  An auditor might be an integral component of a TLS
   client, it might be a standalone service or it might be a secondary
   function of a monitor.

   Any pair of STHs from the same log can be verified by requesting a
   consistency proof using Section 4.4.

   A certificate accompanied by an SCT can be verified against any STH
   dated after the SCT timestamp + the Maximum Merge Delay by requesting
   a Merkle Audit Proof using Section 4.5.

   Auditors can fetch STHs from time to time of their own accord, of
   course, using Section 4.3.




Laurie, et al.          Expires October 18, 2013               [Page 25]

Internet-Draft          Certificate Transparency              April 2013


6.  IANA Considerations

   IANA is requested to allocate an RFC 5246 ExtensionType Value for the
   CTS TLS extension.  The Extension name is
   "signed_certificate_timestamp".














































Laurie, et al.          Expires October 18, 2013               [Page 26]

Internet-Draft          Certificate Transparency              April 2013


7.  Security Considerations

   With CAs, logs, and servers performing the actions described here,
   TLS clients can use logs and signed timestamps to reduce the
   likelihood that they will accept misissued certificates.  If a server
   presents a valid signed timestamp for a certificate, then the client
   knows that the certificate has been published in a log.  From this,
   the client knows that the subject of the certificate has had some
   time to notice the misissue and take some action, such as asking a CA
   to revoke a misissued certificate.  A signed timestamp is not a
   guarantee that the certificate is not misissued, since the subject of
   the certificate might not have checked the logs or the CA might have
   refused to revoke the certificate.

   In addition, if TLS clients will not accept unlogged certificates,
   then site owners will have a greater incentive to submit certificates
   to logs, possibly with the assistance of their CA, increasing the
   overall transparency of the system.

7.1.  Misissued Certificates

   Misissued certificates that have not been publicly logged, and thus
   do not have a valid SCT, will be rejected by TLS clients.  Misissued
   certificates that do have an SCT from a log will appear in that
   public log within the Maximum Merge Delay, assuming the log is
   operating correctly.  Thus, the maximum period of time during which a
   misissued certificate can be used without being available for audit
   is the MMD.

7.2.  Detection of Misissue

   The logs do not themselves detect misissued certificates, they rely
   instead on interested parties, such as domain owners, to monitor them
   and take corrective action when a misissue is detected.

7.3.  Misbehaving logs

   A log can misbehave in two ways: (1), by failing to incorporate a
   certificate with an SCT in the Merkle Tree within the MMD; and (2),
   by violating its append-only property by presenting two different,
   conflicting views of the Merkle Tree at different times and/or to
   different parties.  Both forms of violation will be promptly and
   publicly detectable.

   Violation of the MMD contract is detected by log clients requesting a
   Merkle audit proof for each observed SCT.  These checks can be
   asynchronous, and need only be done once per each certificate.  In
   order to protect the clients' privacy, these checks need not reveal



Laurie, et al.          Expires October 18, 2013               [Page 27]

Internet-Draft          Certificate Transparency              April 2013


   the exact certificate to the log.  Clients can instead request the
   proof from a trusted auditor (since anyone can compute the audit
   proofs from the log), or request Merkle proofs for a batch of
   certificates around the SCT timestamp.

   Violation of the append-only property is detected by global
   gossiping, i.e., everyone auditing logs comparing their versions of
   the latest signed tree heads.  As soon as two conflicting signed tree
   heads for the same log are detected, this is cryptographic proof of
   that log's misbehaviour.









































Laurie, et al.          Expires October 18, 2013               [Page 28]

Internet-Draft          Certificate Transparency              April 2013


8.  Efficiency Considerations

   The Merkle tree design serves the purpose of keeping communication
   overhead low.

   Auditing logs for integrity does not require third parties to
   maintain a copy of each entire log.  The Signed Tree Heads can be
   updated as new entries become available, without recomputing entire
   trees.  Third party auditors need only fetch the Merkle consistency
   proofs against a log's existing STH to efficiently verify the append-
   only property of updates to their Merkle Trees, without auditing the
   entire tree.







































Laurie, et al.          Expires October 18, 2013               [Page 29]

Internet-Draft          Certificate Transparency              April 2013


9.  Future Changes

   This section lists things we might address in a Standards Track
   version of this document.

   Rather than forcing a log operator to create a new log in order to
   change the log signing key, we may allow some key roll mechanism.

   We may add hash and signing algorithm agility.

   We may describe some gossip protocols.








































Laurie, et al.          Expires October 18, 2013               [Page 30]

Internet-Draft          Certificate Transparency              April 2013


10.  Acknowledgements

   The authors would like to thank Erwann Abelea, Robin Alden, Al
   Cutter, Francis Dupont, Stephen Farrell, Brad Hill, Jeff Hodges, Paul
   Hoffman, Jeffrey Hutzelman, SM, Alexey Melnikov, Chris Palmer, Trevor
   Perrin, Ryan Sleevi, Rob Stradling, Carl Wallace for their valuable
   contributions.












































Laurie, et al.          Expires October 18, 2013               [Page 31]

Internet-Draft          Certificate Transparency              April 2013


11.  References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2560]  Myers, M., Ankney, R., Malpani, A., Galperin, S., and C.
              Adams, "X.509 Internet Public Key Infrastructure Online
              Certificate Status Protocol - OCSP", RFC 2560, June 1999.

   [RFC3447]  Jonsson, J. and B. Kaliski, "Public-Key Cryptography
              Standards (PKCS) #1: RSA Cryptography Specifications
              Version 2.1", RFC 3447, February 2003.

   [RFC4627]  Crockford, D., "The application/json Media Type for
              JavaScript Object Notation (JSON)", RFC 4627, July 2006.

   [RFC4648]  Josefsson, S., "The Base16, Base32, and Base64 Data
              Encodings", RFC 4648, October 2006.

   [RFC5246]  Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246, August 2008.

   [RFC5280]  Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
              Housley, R., and W. Polk, "Internet X.509 Public Key
              Infrastructure Certificate and Certificate Revocation List
              (CRL) Profile", RFC 5280, May 2008.

   [RFC5905]  Mills, D., Martin, J., Burbank, J., and W. Kasch, "Network
              Time Protocol Version 4: Protocol and Algorithms
              Specification", RFC 5905, June 2010.

   [RFC6066]  Eastlake, D., "Transport Layer Security (TLS) Extensions:
              Extension Definitions", RFC 6066, January 2011.

   [DSS]      National Institute of Standards and Technology, U.S.
              Department of Commerce, "Digital Signature Standard",
              FIPS 186-3, June 2009.

   [CrosbyWallach]
              Crosby, S. and D. Wallach, "Efficient data structures for
              tamper-evident logging", 2009.

   [HTML401]  Hors, A., Raggett, D., and I. Jacobs, "HTML 4.01
              Specification", World Wide Web Consortium
              Recommendation REC-html401-19991224, December 1999,
              <http://www.w3.org/TR/1999/REC-html401-19991224>.

   [FIPS.180-2.2002]



Laurie, et al.          Expires October 18, 2013               [Page 32]

Internet-Draft          Certificate Transparency              April 2013


              National Institute of Standards and Technology, "Secure
              Hash Standard", FIPS PUB 180-2, August 2002, <http://
              csrc.nist.gov/publications/fips/fips180-2/fips180-2.pdf>.
















































Laurie, et al.          Expires October 18, 2013               [Page 33]

Internet-Draft          Certificate Transparency              April 2013


Authors' Addresses

   Ben Laurie
   Google UK Ltd.

   Email: benl@google.com


   Adam Langley
   Google Inc.

   Email: agl@google.com


   Emilia Kasper
   Google Switzerland GmbH

   Email: ekasper@google.com

































Laurie, et al.          Expires October 18, 2013               [Page 34]