Makefile

#
#       !!!! Do NOT edit this makefile with an editor which replace tabs by spaces !!!!    
#
##############################################################################################
# 
# On command line:
#
# make all = Create project
#
# make clean = Clean project files.
#
# To rebuild project do "make clean" and "make all".
#

##############################################################################################
# Start of default section
#

TRGT = arm-none-eabi-
CC   = $(TRGT)gcc
CP   = $(TRGT)objcopy
AS   = $(TRGT)gcc -x assembler-with-cpp
BIN  = $(CP) -O ihex 

MCU  = cortex-m3

# List all default C defines here, like -D_DEBUG=1
DDEFS = -DSTM32F10X_MD_VL -DUSE_STDPERIPH_DRIVER
# List all default ASM defines here, like -D_DEBUG=1
DADEFS = 

# List all default directories to look for include files here
DINCDIR = /home/raber/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/arm-none-eabi/include

# List the default directory to look for the libraries here
DLIBDIR = /home/raber/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/arm-none-eabi/lib

# List all default libraries here
DLIBS = 

#
# End of default section
##############################################################################################

##############################################################################################
# Start of user section
#

# 
# Define project name and Ram/Flash mode here
PROJECT        = main
RUN_FROM_FLASH = 1

# List all user C define here, like -D_DEBUG=1
UDEFS =

# Define ASM defines here
UADEFS = 

# List C source files here
LIBSDIR    = ./Libraries
CORELIBDIR = $(LIBSDIR)/CMSIS/CM3/CoreSupport
DEVDIR  = $(LIBSDIR)/CMSIS/CM3/DeviceSupport/ST/STM32F10x
STMSPDDIR    = $(LIBSDIR)/STM32F10x_StdPeriph_Driver
STMSPSRCDDIR = $(STMSPDDIR)/src
STMSPINCDDIR = $(STMSPDDIR)/inc
DISCOVERY    = $(LIBSDIR)/Utilities
DEVICE       = ./Device
STARTUP      = $(DEVICE)/startup
LINKER       = $(DEVICE)/linker
SRC  = main.c
SRC += $(CORELIBDIR)/core_cm3.c
SRC += $(DEVDIR)/system_stm32f10x.c
SRC += $(STARTUP)/crt.c 
SRC += $(STARTUP)/vectors_stm32f10x_md.c
SRC += $(DISCOVERY)/STM32vldiscovery.c
## used parts of the STM-Library
SRC += $(STMSPSRCDDIR)/stm32f10x_usart.c
#SRC += $(STMSPSRCDDIR)/stm32f10x_flash.c
SRC  += $(STMSPSRCDDIR)/stm32f10x_gpio.c
SRC  += $(STMSPSRCDDIR)/stm32f10x_rcc.c
#SRC += $(STMSPSRCDDIR)/stm32f10x_spi.c
#SRC += $(STMSPSRCDDIR)/stm32f10x_rtc.c
#SRC += $(STMSPSRCDDIR)/stm32f10x_bkp.c
#SRC += $(STMSPSRCDDIR)/stm32f10x_pwr.c
#SRC += $(STMSPSRCDDIR)/stm32f10x_dma.c
#SRC += $(STMSPSRCDDIR)/stm32f10x_tim.c
SRC += $(STMSPSRCDDIR)/stm32f10x_i2c.c
SRC += $(STMSPSRCDDIR)/stm32f10x_exti.c
SRC += $(STMSPSRCDDIR)/misc.c
SRC += usart.c
SRC += i2c.c


# List ASM source files here
ASRC =

# List all user directories here
UINCDIR = $(CORELIBDIR) \
          $(DEVDIR) \
          $(STMSPINCDDIR) \
          $(DISCOVERY)
# List the user directory to look for the libraries here
ULIBDIR =

# List all user libraries here
ULIBS = 

# Define optimisation level here
OPT = 

#
# End of user defines
##############################################################################################
#
# Define linker script file here
#
ifeq ($(RUN_FROM_FLASH), 0)
LDSCRIPT = $(LINKER)/stm32f103xb_ram.ld
FULL_PRJ = $(PROJECT)_ram
else
LDSCRIPT = $(LINKER)/stm32f103xb_flash.ld
FULL_PRJ = $(PROJECT)_rom
endif




INCDIR  = $(patsubst %,-I%,$(DINCDIR) $(UINCDIR))
LIBDIR  = $(patsubst %,-L%,$(DLIBDIR) $(ULIBDIR))

ifeq ($(RUN_FROM_FLASH), 0)
DEFS    = $(DDEFS) $(UDEFS) -DRUN_FROM_FLASH=0 -DVECT_TAB_SRAM
else
DEFS    = $(DDEFS) $(UDEFS) -DRUN_FROM_FLASH=1
endif

ADEFS   = $(DADEFS) $(UADEFS)
OBJS    = $(ASRC:.s=.o) $(SRC:.c=.o)
LIBS    = $(DLIBS) $(ULIBS)
MCFLAGS = -mcpu=$(MCU)

ASFLAGS = $(MCFLAGS) -g -gdwarf-2 -Wa,-amhls=$(<:.s=.lst) $(ADEFS)
CPFLAGS = $(MCFLAGS) $(OPT) -gdwarf-2 -mthumb -fomit-frame-pointer -Wall -Wstrict-prototypes -fverbose-asm -Wa,-ahlms=$(<:.c=.lst) $(DEFS)
LDFLAGS = $(MCFLAGS) -mthumb -nostartfiles -T$(LDSCRIPT) -Wl,-Map=$(FULL_PRJ).map,--cref,--no-warn-mismatch $(LIBDIR)

# Generate dependency information
CPFLAGS += -MD -MP -MF .dep/$(@F).d

#
# makefile rules
#

all: $(OBJS) $(FULL_PRJ).elf $(FULL_PRJ).hex
ifeq ($(RUN_FROM_FLASH), 0)
	$(TRGT)size $(PROJECT)_ram.elf
else
	$(TRGT)size $(PROJECT)_rom.elf
endif

%o : %c
	$(CC) -c $(CPFLAGS) -I . $(INCDIR) $< -o $@

%o : %s
	$(AS) -c $(ASFLAGS) $< -o $@

%elf: $(OBJS)
	$(CC) $(OBJS) $(LDFLAGS) $(LIBS) -o $@

%hex: %elf
	$(BIN) $< $@
clean:
	-rm -f $(OBJS)
	-rm -f $(FULL_PRJ).elf
	-rm -f $(FULL_PRJ).map
	-rm -f $(FULL_PRJ).hex
	-rm -f $(SRC:.c=.c.bak)
	-rm -f $(SRC:.c=.lst)
	-rm -f $(ASRC:.s=.s.bak)
	-rm -f $(ASRC:.s=.lst)
	-rm -fR .dep

# 
# Include the dependency files, should be the last of the makefile
#
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)

# *** EOF ***