Skip to content

Latest commit

 

History

History
121 lines (88 loc) · 5.19 KB

README.md

File metadata and controls

121 lines (88 loc) · 5.19 KB
Raw

Kaltura CE Packager

This tool is used to clone the latest Kaltura code from the Kaltura CE github repositories, build an install package, and install a working Kaltura environment.

The packaging/package.php script uses the packaging/manifest.ini file to select which components are required for installation and then packages those into a php based installer from the git submodules included in this repository.

The installer package, once created, is used to install and configure a Kaltura server.

System Requirements

The following prerequisites are required for installing and for running the Kaltura CE on a Linux server. Kaltura is developed and tested under the latest CentOS and RedHat predominantely, the installer provides an Ubuntu setup too. A Windows based installation is theoretically possible using XAMPP and CygWin, but will most likely require a lot of messing around.

Hardware and Software Requirements

Minimum Hardware requirements

  • 2GHz+ Dual-Core Processor
  • 4GB+ RAM
  • 7,200 rpm disk with minimum 20GB available space (and additionally according to usage expectations) - Preferably NAS for easier scaling up)

It is recommended to install Kaltura on Ubuntu or CentOS Linux. You may install Kaltura on other Linux distributions, however, these installations are currently not supported by Kaltura.

Minimum Software Prerequisites

  • Apache 2.2 or above.
  • PHP 5.3 or above.
    • Both php and php-cli must be present.
    • Verify that the following settings within the php.ini file are set on each server (for both php and php-cli):
      • For PHP 5.3: Verify that request_order parameter includes C, G and P (recommended: "CGP")
      • For PHP 5.2: Verify that variables_order parameter in php.ini includes C, G and P.
      • Verify that date.timezone parameter is set to the right timezone.
  • MySQL 5.1.37 or above.

    • Verify that mysql server character set is UTF8.

    • The following settings should be added to the my.cnf file

          lower_case_table_names = 1
    thread_stack = 262144
    open_files_limit = 20000

    • MySQL should be restarted after this adjustment is made.

  • curl and php-curl
  • memcached
  • ImageMagick
  • JRE 1.6 or above
  • Pentaho data integration package (instructions below)
  • rsync (Required during installation)
  • Xymon 4.3.7 or above (This is Optional)
  • Disable SELinux (Required during installation)
    • Within the /etc/sysconfig/selinux file (if exists on your server) set: SELINUX=disabled Your server should be restarted after this adjustment is made.

Prerequisite Installation on Common Platforms

Install Pentaho

sudo mkdir /usr/local/pentaho
cd /usr/local/pentaho
sudo wget http://sourceforge.net/projects/pentaho/files/Data%20Integration/4.3.0-stable/pdi-ce-4.3.0-stable.tar.gz
sudo tar xzf pdi-ce-4.3.0-stable.tar.gz
sudo mv data-integration pdi

Build an Installation Package

cd ~/
git clone https://github.com/kaltura/ce-packager.git
cd ce-packager
git submodule update --init
cd packaging
// The installer REQUIRES a full path, don't use relative paths.
php package.php /home/<username>/kaltura-installer false CE v6.0.0 dev

Run the Installation Script

Please note that you must enter a fully qualified domain name when asked for your system hostname during installation. Entering an IP address when you're asked for the hostname will lead to a broken install.

Please note that you must enter Y when asked if you would like to create a new database.

cd ~/kaltura-installer
sudo php install.php

Once the installation script finishes it will give you instructions for modifying /etc/hosts and Apache virtual host configurations.

Useful Knowledge Points

Commonly Used Server Administration Commands

  • Restart Sphinx: sudo pkill searchd && sudo /opt/kaltura/bin/sphinx/searchd -c /opt/kaltura/app/configurations/sphinx/kaltura.conf
  • Check Batch Jobs Status:
    • sudo /opt/kaltura/app/scripts/serviceBatchMgr.sh status
    • ps aux | grep batch

Log files in Kaltura

  • Investigate API Related Problems: /opt/kaltura/log
    • kaltura_apache_error.log
    • kaltura_api_v3.log
  • Investigate Batch Jobs (transcoding, mail, etc.): /opt/katura/log/batch
  • Investigate Analytics Related Problems: /opt/kaltura/dw/logs
  • On production environments, it is a good practice to also set the log verbosity in /opt/kaltura/app/configurations/logger.ini to 5 (errors and warnings) rather than 7 (debug). Debug level logging can quickly fill up the log file
  • If the above are not helpful for debugging your problem, you may find additional information in /var/log/messages for encoder related problems.
  • There may be further information stored in your default Apache error logs

Grepping and Tailing Errors

tail -f /opt/kaltura/log/*.log | grep "ERR:\|PHP\|Stack trace" --color

To setup a development environment, consult docs/development-environment.md