zenoh-kuksa-provider

Zenoh Kuksa Provider

The aim of this project is to provide a bridge component between an Eclipse Zenoh network and an Eclipse Kuksa Databroker.

It can be utilized to subscribe to a list of actuator VSS signals and propagate their state from the Kuksa Databroker to the Zenoh network on the respective key expressions and back.

The provider currently supports peer discovery in the network via UDP multicast, which can be useful for connecting to a nearby zenoh router. If peer discovery is not suitable for your use case, you can also create a direct configured connection.

The basic operation is as follows:
The provider connects to a Kuksa Databroker and subscribes to changes on the configured target values of the configured signals. When there is a change in state, the provider will publish the change to the zenoh network. When a device's target value changes and it publishes its current value to the Zenoh network, the provider will detect this change and update the corresponding current state in the Databroker.

Note: Please note that no datapoint updates for array types can be processed at this time. See kuksa_utils.rs for reference.

Configuring the provider

The main entry point for configuration is the DEFAULT_CONFIG.json5 template configuration in the root of the project. To adjust the configuration, simply copy and rename the commented example:

cp DEFAULT_CONFIG.json5 provider-config.json5

Here you can set the following things:

• URL of your Kuksa Databroker
• List of VSS paths in the Databroker to subscribe to
• Key expression for the provider to subscribe to in the Zenoh network (e.g. Vehicle/Body/Horn/IsActive)
• Enable or disable peer discovery (scouting)
• URL of a Zenoh router (if not using peer discovery)

Build and run the application

Use cargo to compile the project:

cargo build --release

The compiled binary is built as target/release/zenoh-kuksa-provider.

In order to run the provider you need to pass the provider-config.json5 file as an argument like this:

./target/release/zenoh-kuksa-provider -c provider-config.json5

To enable logging use

RUST_LOG=DEBUG ./target/release/zenoh-kuksa-provider -c provider-config.json5

Docker image

Use

docker build -t zenoh-kuksa-provider.

to build the image and tag it as zenoh-kuksa-provider.

Usage

The following command will run the image and mount your provider-config.json5 file into the container, setting the PROVIDER_CONFIG environment variable:

docker run \
  -e "PROVIDER_CONFIG=/provider-config.json5" \
  -v "$(pwd)/provider-config.json5:/provider-config.json5" \
  zenoh-kuksa-provider

🚧 Remember to follow the steps from Configuring the provider in order to have a properly composed provider-config.json5 file.