PCEの誤作動 #192
Replies: 5 comments 19 replies
-
|
I got the same issue myself but not sure when it got introduce in my cable. Maybe when I changed my resistor pullup value 47K. @pmgducati reported everything was fine for him so I haven't look into it further. The issue is the output change too slowly on SEL line change. The test FW simply do the bare minimum to be faster. What you could do is reduce the pull-up value to 1 Kohm and see if it work better with regular FW. Turbo will come in future, no ETA. |
Beta Was this translation helpful? Give feedback.
-
|
I replaced it with 1kΩ, but there was no change. |
Beta Was this translation helpful? Give feedback.
-
|
Switch the OE and SEL wires that will solve your double press issue.
…On Tue, Mar 1, 2022, 06:48 niasuniasu ***@***.***> wrote:
I replaced it with 1kΩ, but there was no change.
The dragon spirit is inputting normally.
—
Reply to this email directly, view it on GitHub
<#192 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AE7NEE5JI5IGXKEFE55IYO3U5YG3LANCNFSM5PTWRIOA>
.
Triage notifications on the go with GitHub Mobile for iOS
<https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675>
or Android
<https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
I couldn't get a good shot of the wiring because it is built into the case. |
Beta Was this translation helpful? Give feedback.
-
|
The important part is to make sure SEL is on IO33, but if everything work fine with the pce-test FW, I'm pretty sure your build is fine. I'll try figure out why mine doesn't work anymore sometime this month and if I can't I will integrate pce-test into a release. |
Beta Was this translation helpful? Give feedback.
-
|
Couldn't figure why mine didn't work, so I end up building a new one and that one work perfect with 47K pill up. Still no idea why the other doesn't work, something is slowing down the 2 input. Maybe try rebuilding the OE & SEL 74AHCT125. |
Beta Was this translation helpful? Give feedback.
-
|
I will try to make it again. Thank you very much. |
Beta Was this translation helpful? Give feedback.
-
|
Sorry info from my last post was wrong. I just realized my new cable had the OE line short to GND which madeit functional. But once wiring properly it doesn't work with regular FW just like my previous one. So lets just say PCE support is broken, please use the pce test firmware meanwhile. No idea why it work for pmg. I try to fix it later. Sorry for the trouble. |
Beta Was this translation helpful? Give feedback.
-
|
@niasuniasu here a preview of v1.4.1 with 2btn, 6btns and multitap timing fixed, no more random press with my adapter. |
Beta Was this translation helpful? Give feedback.
-
|
Hello. Version 1.4.1 works for me. multitap also works. on the other hand, no way to operate the 6-button pad. I put it in GamePadAlt mode. And the controller does not respond. Have you tried ? Am I making a mistake? |
Beta Was this translation helpful? Give feedback.
-
|
Problem is likely only with the everdrive, if you swap the avenue pad 6 to blueretro after the game is started does that work? |
Beta Was this translation helpful? Give feedback.
-
|
A lot of tests this afternoon:
|
Beta Was this translation helpful? Give feedback.
-
|
You probably got something wrong in your OE or SEL line wiring. Street Fighter II cartridge work fine for me in 6 buttons mode both in single and multitap mode. Double check your pull up resistors. |
Beta Was this translation helpful? Give feedback.
-
|
I will look at this. I noticed while making bluetooth receivers for my Neo Geo and my PS1 that a long cable between the controller port was causing problems. For the PCE, I have a fairly long cable. For the moment. Can this explain? |
Beta Was this translation helpful? Give feedback.
-
|
Yes most likely, keep cable less than 1 feet. |
Beta Was this translation helpful? Give feedback.
-
|
Hello |
Beta Was this translation helpful? Give feedback.
-
|
Those pesky decimal points! |
Beta Was this translation helpful? Give feedback.
-
In v1.2.2 of PCE, I cannot input D Pad correctly.
For example, when I press D Pad Up, I am also inputted.
D Pad Up + I
D Pad Right + II
D Pad Left + Run
D Pad Down + Select
What is the cause?
In v1.2.2-pce_test.zip, the input is normal.
Also, when will the Turbo function be available?
Beta Was this translation helpful? Give feedback.
All reactions