plug-driveway-flood.yaml

---
# Luntak brand Tuya Plug (plug02)
#
substitutions:
  friendly_name: "Power cycle: driveway flood"
  id: plug02
  hostname: "plug-driveway-flood"
  ip: 10.0.20.62

  <<: !include common/substitutions/gpio/tuya_plug.yaml

esphome:
  friendly_name: $friendly_name
  name: $hostname

esp8266:
  board: esp01_1m
  framework:
    version: recommended

  <<: !include common/esphome/leds/status.yaml


<<: !include common/common.yaml

binary_sensor:
  - !include common/binary_sensors/power_button_inverted.yaml

light:
  - !include common/lights/status_led.yaml

output:
  - !include common/outputs/status_led.yaml

switch:
  - platform: gpio
    #name: $friendly_name
    id: relay
    pin: $relay_gpio
    internal: true
    restore_mode: ALWAYS_ON # On at boot
    # Restart after slight delay.
    on_turn_off:
      - delay: 15s
      - switch.turn_on: relay

  - !include common/switches/relay_status_led.yaml

text_sensor:
  - platform: homeassistant
    id: online_state
    internal: true
    entity_id: device_tracker.iot_driveway_flood_light_power_cycler
    on_value:
      #- lambda: ESP_LOGD("online_state", "%s", id(online_state));
      - if:
          condition:
            for:
              time: 10min
              condition:
                - lambda: return id(online_state).state != "home";
          then:
            - switch.turn_off: relay