From ed5ce12e98cca6c4c8c0a9b3d1064b205a7e48e1 Mon Sep 17 00:00:00 2001 From: Vitaliy Nimych Date: Sun, 20 Oct 2024 10:16:50 +0300 Subject: [PATCH] add new target StellarF7 Dual --- configs/STELLARF7_DUAL/config.h | 117 ++++++++++++++++++++++++++++++++ 1 file changed, 117 insertions(+) create mode 100644 configs/STELLARF7_DUAL/config.h diff --git a/configs/STELLARF7_DUAL/config.h b/configs/STELLARF7_DUAL/config.h new file mode 100644 index 00000000..60fa3b59 --- /dev/null +++ b/configs/STELLARF7_DUAL/config.h @@ -0,0 +1,117 @@ +/* + * This file is part of Betaflight. + * + * Betaflight is free software. You can redistribute this software + * and/or modify this software under the terms of the GNU General + * Public License as published by the Free Software Foundation, + * either version 3 of the License, or (at your option) any later + * version. + * + * Betaflight is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this software. + * + * If not, see . + */ + +#pragma once + +#define USE_GYRO +#define USE_GYRO_SPI_ICM42688P +#define USE_ACC +#define USE_ACC_SPI_ICM42688P +#define USE_BARO +#define USE_BARO_BMP280 +#define USE_BARO_DPS310 +#define USE_FLASH +#define USE_FLASH_M25P16 +#define USE_MAX7456 + +#define FC_TARGET_MCU STM32F7X2 +#define BOARD_NAME STELLARF7_DUAL +#define MANUFACTURER_ID STBE + +#define MOTOR1_PIN PC9 +#define MOTOR2_PIN PC8 +#define MOTOR3_PIN PC7 +#define MOTOR4_PIN PC6 +#define MOTOR5_PIN PB7 +#define MOTOR6_PIN PB6 +#define MOTOR7_PIN PB5 +#define MOTOR8_PIN PB4 +#define SERVO1_PIN PB3 +#define UART1_TX_PIN PA9 +#define UART1_RX_PIN PA10 +#define UART2_TX_PIN PA2 +#define UART2_RX_PIN PA3 +#define UART3_TX_PIN PC10 +#define UART3_RX_PIN PC11 +#define UART4_TX_PIN PA0 +#define UART4_RX_PIN PA1 +#define UART5_TX_PIN PC12 +#define UART5_RX_PIN PD2 +#define I2C1_SCL_PIN PB8 +#define I2C1_SDA_PIN PB9 +#define LED0_PIN PB12 +#define SPI1_SCK_PIN PA5 +#define SPI2_SCK_PIN PB13 +#define SPI1_SDI_PIN PA6 +#define SPI2_SDI_PIN PB14 +#define SPI1_SDO_PIN PA7 +#define SPI2_SDO_PIN PB15 +#define ADC_VBAT_PIN PC0 +#define ADC_CURR_PIN PC1 +#define PINIO1_PIN PA15 +#define FLASH_CS_PIN PC13 +#define MAX7456_SPI_CS_PIN PC3 +#define GYRO_1_EXTI_PIN PA4 +#define GYRO_1_CS_PIN PC4 +#define GYRO_2_EXTI_PIN PB10 +#define GYRO_2_CS_PIN PB11 +#define BEEPER_PIN PB2 + +#define USE_GYRO_CLKIN +#define GYRO_1_CLKIN_PIN PA8 + +#define TIMER_PIN_MAPPING TIMER_PIN_MAP( 0, PC9, 2, 0 ) \ + TIMER_PIN_MAP( 1, PC8, 2, 1 ) \ + TIMER_PIN_MAP( 2, PC7, 2, 1 ) \ + TIMER_PIN_MAP( 3, PC6, 2, 1 ) \ + TIMER_PIN_MAP( 4, PB7, 1, 0 ) \ + TIMER_PIN_MAP( 5, PB6, 1, 0 ) \ + TIMER_PIN_MAP( 6, PB5, 1, 0 ) \ + TIMER_PIN_MAP( 7, PB4, 1, 0 ) \ + TIMER_PIN_MAP( 8, PB3, 1, 0 ) \ + TIMER_PIN_MAP( 9, PA8, 1, -1 ) + +#define ADC1_DMA_OPT 1 + +#define SERIALRX_UART SERIAL_PORT_USART2 + +//TODO beacon RX_LOST +//TODO beacon RX_SET + +#define MAG_I2C_INSTANCE (I2CDEV_1) +#define BARO_I2C_INSTANCE (I2CDEV_1) +#define ADC_INSTANCE ADC1 +#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH +#define DEFAULT_DSHOT_BURST DSHOT_DMAR_ON +//TODO #define MOTOR_PWM_PROTOCOL DSHOT300 +#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC +#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC +#define DEFAULT_VOLTAGE_METER_SCALE 110 +#define DEFAULT_CURRENT_METER_SCALE 182 +#define BEEPER_INVERTED +//set osd_displayport_device = MAX7456 +#define MAX7456_SPI_INSTANCE SPI2 +#define FLASH_SPI_INSTANCE SPI2 +#define GYRO_1_SPI_INSTANCE SPI1 +#define GYRO_1_ALIGN CW180_DEG +#define GYRO_2_SPI_INSTANCE SPI1 +#define GYRO_2_ALIGN CW90_DEG +#define PINIO1_BOX 40