You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
as it says, I have a BBBW with a Robotics cape, I configured pretty much as per the ardupilot blue setup....everything works fine except I cannot receive RC SBUS input on any E1-4.....i have tried many different kernels and images, librobotcontrol, etc....nothing seems to help....copy of uEnv.txt below, neither commenting or uncommenting the PRUSS options or cape overlay options makes any difference....the receiver and wiring check out ok, no probs there.
HI! Did you manage to solve the issue? I am also stuck here - tried many images, kernels, binaries - still nothing. Next I will probably turn to the binary file, think it had the RC port defined somewhere, idunno. Any help would be appreciated,
as it says, I have a BBBW with a Robotics cape, I configured pretty much as per the ardupilot blue setup....everything works fine except I cannot receive RC SBUS input on any E1-4.....i have tried many different kernels and images, librobotcontrol, etc....nothing seems to help....copy of uEnv.txt below, neither commenting or uncommenting the PRUSS options or cape overlay options makes any difference....the receiver and wiring check out ok, no probs there.
#Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0
uname_r=4.19.142-bone-rt-r56
#uuid=
dtb=am335x-boneblack-wireless-roboticscape.dtb
###U-Boot Overlays###
###Documentation: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays
###Master Enable
#enable_uboot_overlays=1
###Overide capes with eeprom
#uboot_overlay_addr0=/lib/firmware/.dtbo
#uboot_overlay_addr1=/lib/firmware/.dtbo
#uboot_overlay_addr2=/lib/firmware/.dtbo
#uboot_overlay_addr3=/lib/firmware/.dtbo
###Additional custom capes
#uboot_overlay_addr4=/lib/firmware/.dtbo
#uboot_overlay_addr5=/lib/firmware/.dtbo
#uboot_overlay_addr6=/lib/firmware/.dtbo
#uboot_overlay_addr7=/lib/firmware/.dtbo
###Custom Cape
#dtb_overlay=/lib/firmware/BB-I2C1-00A0.dtbo
#dtb_overlay=/lib/firmware/BB-UART4-00A0.dtbo
#dtb_overlay=/lib/firmware/BB-ADC-00A0.dtbo
###Disable auto loading of virtual capes (emmc/video/wireless/adc)
#disable_uboot_overlay_emmc=1
#disable_uboot_overlay_video=1
#disable_uboot_overlay_audio=1
#disable_uboot_overlay_wireless=1
#disable_uboot_overlay_adc=1
###PRUSS OPTIONS
###pru_rproc (4.14.x-ti kernel)
###uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo
###pru_rproc (4.19.x-ti kernel)
##uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo
###pru_uio (4.14.x-ti, 4.19.x-ti & mainline/bone kernel)
#uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo
###Cape Universal Enable
#enable_uboot_cape_universal=1
cmdline=coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 quiet
The text was updated successfully, but these errors were encountered: