libp2p-example.txt

/ Copyright 2021 Protocol Labs.
//
// Permission is hereby granted, free of charge, to any person obtaining a
// copy of this software and associated documentation files (the "Software"),
// to deal in the Software without restriction, including without limitation
// the rights to use, copy, modify, merge, publish, distribute, sublicense,
// and/or sell copies of the Software, and to permit persons to whom the
// Software is furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in
// all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
// OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
// FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
// DEALINGS IN THE SOFTWARE.

//! # File sharing example
//!
//! Basic file sharing application with peers either providing or locating and
//! getting files by name.
//!
//! While obviously showcasing how to build a basic file sharing application,
//! the actual goal of this example is **to show how to integrate rust-libp2p
//! into a larger application**.
//!
//! ## Sample plot
//!
//! Assuming there are 3 nodes, A, B and C. A and B each provide a file while C
//! retrieves a file.
//!
//! Provider nodes A and B each provide a file, file FA and FB respectively.
//! They do so by advertising themselves as a provider for their file on a DHT
//! via [`libp2p-kad`]. The two, among other nodes of the network, are
//! interconnected via the DHT.
//!
//! Node C can locate the providers for file FA or FB on the DHT via
//! [`libp2p-kad`] without being connected to the specific node providing the
//! file, but any node of the DHT. Node C then connects to the corresponding
//! node and requests the file content of the file via
//! [`libp2p-request-response`].
//!
//! ## Architectural properties
//!
//! - Clean clonable async/await interface ([`Client`]) to interact with the
//!   network layer.
//!
//! - Single task driving the network layer, no locks required.
//!
//! ## Usage
//!
//! A two node setup with one node providing the file and one node requesting the file.
//!
//! 1. Run command below in one terminal.
//!
//!    ```
//!    cargo run --example file-sharing -- \
//!              --listen-address /ip4/127.0.0.1/tcp/40837 \
//!              --secret-key-seed 1 \
//!              provide \
//!              --path <path-to-your-file> \
//!              --name <name-for-others-to-find-your-file>
//!    ```
//!
//! 2. Run command below in another terminal.
//!
//!    ```
//!    cargo run --example file-sharing -- \
//!              --peer /ip4/127.0.0.1/tcp/40837/p2p/12D3KooWPjceQrSwdWXPyLLeABRXmuqt69Rg3sBYbU1Nft9HyQ6X \
//!              get \
//!              --name <name-for-others-to-find-your-file>
//!    ```
//!
//! Note: The client does not need to be directly connected to the providing
//! peer, as long as both are connected to some node on the same DHT.

use async_std::io;
use async_std::task::spawn;
use futures::prelude::*;
use libp2p::core::{Multiaddr, PeerId};
use libp2p::multiaddr::Protocol;
use std::error::Error;
use std::path::PathBuf;
use structopt::StructOpt;

#[macro_use]
extern crate log;

#[async_std::main]
async fn main() -> Result<(), Box<dyn Error>> {
    env_logger::init();

    let opt = Opt::from_args();

    let (mut network_client, mut network_events, network_event_loop) =
        network::new(opt.secret_key_seed).await?;

    // Spawn the network task for it to run in the background.
    spawn(network_event_loop.run());

    // In case a listen address was provided use it, otherwise listen on any
    // address.
    match opt.listen_address {
        Some(addr) => network_client
            .start_listening(addr)
            .await
            .expect("Listening not to fail."),
        None => network_client
            .start_listening("/ip4/0.0.0.0/tcp/0".parse()?)
            .await
            .expect("Listening not to fail."),
    };
    //todo try other methods

    // In case the user provided an address of a peer on the CLI, dial it.
    if let Some(addr) = opt.peer {
        let peer_id = match addr.iter().last() {
            Some(Protocol::P2p(hash)) => PeerId::from_multihash(hash).expect("Valid hash."),
            _ => return Err("Expect peer multiaddr to contain peer ID.".into()),
        };
        network_client
            .dial(peer_id, addr)
            .await
            .expect("Dial to succeed");
    }

    match opt.argument {
        // Providing a file.
        CliArgument::Provide { path, name } => {
            // Advertise oneself as a provider of the file on the DHT.
            network_client.start_providing(name.clone()).await;

            loop {
                match network_events.next().await {
                    // Reply with the content of the file on incoming requests.
                    Some(network::Event::InboundRequest { request, channel }) => {
                        if request == name {
                            let file_content = std::fs::read_to_string(&path)?;
                            network_client.respond_file(file_content, channel).await;
                        }
                    }
                    e => todo!("{:?}", e),
                }
            }
        }
        // Locating and getting a file.
        CliArgument::Get { name } => {
            // Locate all nodes providing the file.
            let providers = network_client.get_providers(name.clone()).await;
            if providers.is_empty() {
                return Err(format!("Could not find provider for file {}.", name).into());
            }

            // Request the content of the file from each node.
            let requests = providers.into_iter().map(|p| {
                let mut network_client = network_client.clone();
                let name = name.clone();
                async move { network_client.request_file(p, name).await }.boxed()
            });

            // Await the requests, ignore the remaining once a single one succeeds.
            let file = futures::future::select_ok(requests)
                .await
                .map_err(|_| "None of the providers returned file.")?
                .0;

            println!("Content of file {}: {}", name, file);
        }
    }

    Ok(())
}

#[derive(Debug, StructOpt)]
#[structopt(name = "libp2p file sharing example")]
struct Opt {
    /// Fixed value to generate deterministic peer ID.
    #[structopt(long)]
    secret_key_seed: Option<u8>,

    #[structopt(long)]
    peer: Option<Multiaddr>,

    #[structopt(long)]
    listen_address: Option<Multiaddr>,

    #[structopt(subcommand)]
    argument: CliArgument,
}

#[derive(Debug, StructOpt)]
enum CliArgument {
    Provide {
        #[structopt(long)]
        path: PathBuf,
        #[structopt(long)]
        name: String,
    },
    Get {
        #[structopt(long)]
        name: String,
    },
}

/// The network module, encapsulating all network related logic.
mod network {
    use super::*;
    use async_trait::async_trait;
    use futures::channel::{mpsc, oneshot};
    use libp2p::core::either::EitherError;
    use libp2p::core::upgrade::{read_length_prefixed, write_length_prefixed, ProtocolName};
    use libp2p::identity;
    use libp2p::identity::ed25519;
    use libp2p::kad::record::store::MemoryStore;
    use libp2p::kad::{GetProvidersOk, Kademlia, KademliaEvent, QueryId, QueryResult};
    use libp2p::multiaddr::Protocol;
    use libp2p::request_response::{
        ProtocolSupport, RequestId, RequestResponse, RequestResponseCodec, RequestResponseEvent,
        RequestResponseMessage, ResponseChannel,
    };
    use libp2p::swarm::{ConnectionHandlerUpgrErr, SwarmBuilder, SwarmEvent};
    use libp2p::{NetworkBehaviour, Swarm};
    use std::collections::{HashMap, HashSet};
    use std::iter;

    /// Creates the network components, namely:
    ///
    /// - The network client to interact with the network layer from anywhere
    ///   within your application.
    ///
    /// - The network event stream, e.g. for incoming requests.
    ///
    /// - The network task driving the network itself.
    pub async fn new(
        secret_key_seed: Option<u8>,
    ) -> Result<(Client, impl Stream<Item = Event>, EventLoop), Box<dyn Error>> {
        // Create a public/private key pair, either random or based on a seed.
        let id_keys = match secret_key_seed {
            Some(seed) => {
                let mut bytes = [0u8; 32];
                bytes[0] = seed;
                let secret_key = ed25519::SecretKey::from_bytes(&mut bytes).expect(
                    "this returns `Err` only if the length is wrong; the length is correct; qed",
                );
                identity::Keypair::Ed25519(secret_key.into())
            }
            None => identity::Keypair::generate_ed25519(),
        };
        let peer_id = id_keys.public().to_peer_id();

        // Build the Swarm, connecting the lower layer transport logic with the
        // higher layer network behaviour logic.
        let swarm = SwarmBuilder::new(
            libp2p::development_transport(id_keys).await?,
            ComposedBehaviour {
                kademlia: Kademlia::new(peer_id, MemoryStore::new(peer_id)),
                request_response: RequestResponse::new(
                    FileExchangeCodec(),
                    iter::once((FileExchangeProtocol(), ProtocolSupport::Full)),
                    Default::default(),
                ),
            },
            peer_id,
        )
        .build();

        let (command_sender, command_receiver) = mpsc::channel(0);
        let (event_sender, event_receiver) = mpsc::channel(0);

        Ok((
            Client {
                sender: command_sender,
            },
            event_receiver,
            EventLoop::new(swarm, command_receiver, event_sender),
        ))
    }

    #[derive(Clone)]
    pub struct Client {
        sender: mpsc::Sender<Command>,
    }

    impl Client {
        /// Listen for incoming connections on the given address.
        pub async fn start_listening(
            &mut self,
            addr: Multiaddr,
        ) -> Result<(), Box<dyn Error + Send>> {
            let (sender, receiver) = oneshot::channel();
            self.sender
                .send(Command::StartListening { addr, sender })
                .await
                .expect("Command receiver not to be dropped.");
            receiver.await.expect("Sender not to be dropped.")
        }

        /// Dial the given peer at the given address.
        pub async fn dial(
            &mut self,
            peer_id: PeerId,
            peer_addr: Multiaddr,
        ) -> Result<(), Box<dyn Error + Send>> {
            let (sender, receiver) = oneshot::channel();
            self.sender
                .send(Command::Dial {
                    peer_id,
                    peer_addr,
                    sender,
                })
                .await
                .expect("Command receiver not to be dropped.");
            receiver.await.expect("Sender not to be dropped.")
        }

        /// Advertise the local node as the provider of the given file on the DHT.
        pub async fn start_providing(&mut self, file_name: String) {
            let (sender, receiver) = oneshot::channel();
            self.sender
                .send(Command::StartProviding { file_name, sender })
                .await
                .expect("Command receiver not to be dropped.");
            receiver.await.expect("Sender not to be dropped.");
        }

        /// Find the providers for the given file on the DHT.
        pub async fn get_providers(&mut self, file_name: String) -> HashSet<PeerId> {
            let (sender, receiver) = oneshot::channel();
            self.sender
                .send(Command::GetProviders { file_name, sender })
                .await
                .expect("Command receiver not to be dropped.");
            receiver.await.expect("Sender not to be dropped.")
        }

        /// Request the content of the given file from the given peer.
        pub async fn request_file(
            &mut self,
            peer: PeerId,
            file_name: String,
        ) -> Result<String, Box<dyn Error + Send>> {
            let (sender, receiver) = oneshot::channel();
            self.sender
                .send(Command::RequestFile {
                    file_name,
                    peer,
                    sender,
                })
                .await
                .expect("Command receiver not to be dropped.");
            receiver.await.expect("Sender not be dropped.")
        }

        /// Respond with the provided file content to the given request.
        pub async fn respond_file(&mut self, file: String, channel: ResponseChannel<FileResponse>) {
            self.sender
                .send(Command::RespondFile { file, channel })
                .await
                .expect("Command receiver not to be dropped.");
        }
    }

    pub struct EventLoop {
        swarm: Swarm<ComposedBehaviour>,
        command_receiver: mpsc::Receiver<Command>,
        event_sender: mpsc::Sender<Event>,
        pending_dial: HashMap<PeerId, oneshot::Sender<Result<(), Box<dyn Error + Send>>>>,
        pending_start_providing: HashMap<QueryId, oneshot::Sender<()>>,
        pending_get_providers: HashMap<QueryId, oneshot::Sender<HashSet<PeerId>>>,
        pending_request_file:
            HashMap<RequestId, oneshot::Sender<Result<String, Box<dyn Error + Send>>>>,
    }

    impl EventLoop {
        fn new(
            swarm: Swarm<ComposedBehaviour>,
            command_receiver: mpsc::Receiver<Command>,
            event_sender: mpsc::Sender<Event>,
        ) -> Self {
            Self {
                swarm,
                command_receiver,
                event_sender,
                pending_dial: Default::default(),
                pending_start_providing: Default::default(),
                pending_get_providers: Default::default(),
                pending_request_file: Default::default(),
            }
        }

        pub async fn run(mut self) {
            loop {
                futures::select! {
                    event = self.swarm.next() => self.handle_event(event.expect("Swarm stream to be infinite.")).await  ,
                    command = self.command_receiver.next() => match command {
                        Some(c) => self.handle_command(c).await,
                        // Command channel closed, thus shutting down the network event loop.
                        None=>  return,
                    },
                }
            }
        }

        async fn handle_event(
            &mut self,
            event: SwarmEvent<
                ComposedEvent,
                EitherError<ConnectionHandlerUpgrErr<io::Error>, io::Error>,
            >,
        ) {
            match event {
                SwarmEvent::Behaviour(ComposedEvent::Kademlia(
                    KademliaEvent::OutboundQueryCompleted {
                        id,
                        result: QueryResult::StartProviding(_),
                        ..
                    },
                )) => {
                    let sender: oneshot::Sender<()> = self
                        .pending_start_providing
                        .remove(&id)
                        .expect("Completed query to be previously pending.");
                    let _ = sender.send(());
                }
                SwarmEvent::Behaviour(ComposedEvent::Kademlia(
                    KademliaEvent::OutboundQueryCompleted {
                        id,
                        result: QueryResult::GetProviders(Ok(GetProvidersOk { providers, .. })),
                        ..
                    },
                )) => {
                    let _ = self
                        .pending_get_providers
                        .remove(&id)
                        .expect("Completed query to be previously pending.")
                        .send(providers);
                }
                SwarmEvent::Behaviour(ComposedEvent::Kademlia(_)) => {}
                SwarmEvent::Behaviour(ComposedEvent::RequestResponse(
                    RequestResponseEvent::Message { message, .. },
                )) => match message {
                    RequestResponseMessage::Request {
                        request, channel, ..
                    } => {
                        self.event_sender
                            .send(Event::InboundRequest {
                                request: request.0,
                                channel,
                            })
                            .await
                            .expect("Event receiver not to be dropped.");
                    }
                    RequestResponseMessage::Response {
                        request_id,
                        response,
                    } => {
                        let _ = self
                            .pending_request_file
                            .remove(&request_id)
                            .expect("Request to still be pending.")
                            .send(Ok(response.0));
                    }
                },
                SwarmEvent::Behaviour(ComposedEvent::RequestResponse(
                    RequestResponseEvent::OutboundFailure {
                        request_id, error, ..
                    },
                )) => {
                    let _ = self
                        .pending_request_file
                        .remove(&request_id)
                        .expect("Request to still be pending.")
                        .send(Err(Box::new(error)));
                }
                SwarmEvent::Behaviour(ComposedEvent::RequestResponse(
                    RequestResponseEvent::ResponseSent { .. },
                )) => {}
                SwarmEvent::NewListenAddr { address, .. } => {
                    let local_peer_id = *self.swarm.local_peer_id();
                    println!(
                        "Local node is listening on {:?}",
                        address.with(Protocol::P2p(local_peer_id.into()))
                    );
                }
                SwarmEvent::IncomingConnection { .. } => {}
                SwarmEvent::ConnectionEstablished {
                    peer_id, endpoint, ..
                } => {
                    if endpoint.is_dialer() {
                        if let Some(sender) = self.pending_dial.remove(&peer_id) {
                            let _ = sender.send(Ok(()));
                        }
                    }
                }
                SwarmEvent::ConnectionClosed { .. } => {}
                SwarmEvent::OutgoingConnectionError { peer_id, error, .. } => {
                    if let Some(peer_id) = peer_id {
                        if let Some(sender) = self.pending_dial.remove(&peer_id) {
                            let _ = sender.send(Err(Box::new(error)));
                        }
                    }
                }
                SwarmEvent::IncomingConnectionError { .. } => {}
                SwarmEvent::Dialing(peer_id) => println!("Dialing {}", peer_id),
                e => panic!("{:?}", e),
            }
        }

        async fn handle_command(&mut self, command: Command) {
            match command {
                Command::StartListening { addr, sender } => {
                    let _ = match self.swarm.listen_on(addr) {
                        Ok(_) => sender.send(Ok(())),
                        Err(e) => sender.send(Err(Box::new(e))),
                    };
                }
                Command::Dial {
                    peer_id,
                    peer_addr,
                    sender,
                } => {
                    if self.pending_dial.contains_key(&peer_id) {
                        todo!("Already dialing peer.");
                    } else {
                        self.swarm
                            .behaviour_mut()
                            .kademlia
                            .add_address(&peer_id, peer_addr.clone());
                        match self
                            .swarm
                            .dial(peer_addr.with(Protocol::P2p(peer_id.into())))
                        {
                            Ok(()) => {
                                self.pending_dial.insert(peer_id, sender);
                            }
                            Err(e) => {
                                let _ = sender.send(Err(Box::new(e)));
                            }
                        }
                    }
                }
                Command::StartProviding { file_name, sender } => {
                    let query_id = self
                        .swarm
                        .behaviour_mut()
                        .kademlia
                        .start_providing(file_name.into_bytes().into())
                        .expect("No store error.");
                    self.pending_start_providing.insert(query_id, sender);
                }
                Command::GetProviders { file_name, sender } => {
                    let query_id = self
                        .swarm
                        .behaviour_mut()
                        .kademlia
                        .get_providers(file_name.into_bytes().into());
                    self.pending_get_providers.insert(query_id, sender);
                }
                Command::RequestFile {
                    file_name,
                    peer,
                    sender,
                } => {
                    let request_id = self
                        .swarm
                        .behaviour_mut()
                        .request_response
                        .send_request(&peer, FileRequest(file_name));
                    self.pending_request_file.insert(request_id, sender);
                }
                Command::RespondFile { file, channel } => {
                    self.swarm
                        .behaviour_mut()
                        .request_response
                        .send_response(channel, FileResponse(file))
                        .expect("Connection to peer to be still open.");
                }
            }
        }
    }

    #[derive(NetworkBehaviour)]
    #[behaviour(out_event = "ComposedEvent")]
    struct ComposedBehaviour {
        request_response: RequestResponse<FileExchangeCodec>,
        kademlia: Kademlia<MemoryStore>,
    }

    #[derive(Debug)]
    enum ComposedEvent {
        RequestResponse(RequestResponseEvent<FileRequest, FileResponse>),
        Kademlia(KademliaEvent),
    }

    impl From<RequestResponseEvent<FileRequest, FileResponse>> for ComposedEvent {
        fn from(event: RequestResponseEvent<FileRequest, FileResponse>) -> Self {
            ComposedEvent::RequestResponse(event)
        }
    }

    impl From<KademliaEvent> for ComposedEvent {
        fn from(event: KademliaEvent) -> Self {
            ComposedEvent::Kademlia(event)
        }
    }

    #[derive(Debug)]
    enum Command {
        StartListening {
            addr: Multiaddr,
            sender: oneshot::Sender<Result<(), Box<dyn Error + Send>>>,
        },
        Dial {
            peer_id: PeerId,
            peer_addr: Multiaddr,
            sender: oneshot::Sender<Result<(), Box<dyn Error + Send>>>,
        },
        StartProviding {
            file_name: String,
            sender: oneshot::Sender<()>,
        },
        GetProviders {
            file_name: String,
            sender: oneshot::Sender<HashSet<PeerId>>,
        },
        RequestFile {
            file_name: String,
            peer: PeerId,
            sender: oneshot::Sender<Result<String, Box<dyn Error + Send>>>,
        },
        RespondFile {
            file: String,
            channel: ResponseChannel<FileResponse>,
        },
    }

    #[derive(Debug)]
    pub enum Event {
        InboundRequest {
            request: String,
            channel: ResponseChannel<FileResponse>,
        },
    }

    // Simple file exchange protocol

    #[derive(Debug, Clone)]
    struct FileExchangeProtocol();
    #[derive(Clone)]
    struct FileExchangeCodec();
    #[derive(Debug, Clone, PartialEq, Eq)]
    struct FileRequest(String);
    #[derive(Debug, Clone, PartialEq, Eq)]
    pub struct FileResponse(String);

    impl ProtocolName for FileExchangeProtocol {
        fn protocol_name(&self) -> &[u8] {
            "/file-exchange/1".as_bytes()
        }
    }

    #[async_trait]
    impl RequestResponseCodec for FileExchangeCodec {
        type Protocol = FileExchangeProtocol;
        type Request = FileRequest;
        type Response = FileResponse;

        async fn read_request<T>(
            &mut self,
            _: &FileExchangeProtocol,
            io: &mut T,
        ) -> io::Result<Self::Request>
        where
            T: AsyncRead + Unpin + Send,
        {
            let vec = read_length_prefixed(io, 1_000_000).await?;

            if vec.is_empty() {
                return Err(io::ErrorKind::UnexpectedEof.into());
            }

            Ok(FileRequest(String::from_utf8(vec).unwrap()))
        }

        async fn read_response<T>(
            &mut self,
            _: &FileExchangeProtocol,
            io: &mut T,
        ) -> io::Result<Self::Response>
        where
            T: AsyncRead + Unpin + Send,
        {
            let vec = read_length_prefixed(io, 1_000_000).await?;

            if vec.is_empty() {
                return Err(io::ErrorKind::UnexpectedEof.into());
            }

            Ok(FileResponse(String::from_utf8(vec).unwrap()))
        }

        async fn write_request<T>(
            &mut self,
            _: &FileExchangeProtocol,
            io: &mut T,
            FileRequest(data): FileRequest,
        ) -> io::Result<()>
        where
            T: AsyncWrite + Unpin + Send,
        {
            write_length_prefixed(io, data).await?;
            io.close().await?;

            Ok(())
        }

        async fn write_response<T>(
            &mut self,
            _: &FileExchangeProtocol,
            io: &mut T,
            FileResponse(data): FileResponse,
        ) -> io::Result<()>
        where
            T: AsyncWrite + Unpin + Send,
        {
            write_length_prefixed(io, data).await?;
            io.close().await?;

            Ok(())
        }
    }
}