unh_thesis.sty

%==============================================================
% WARNING: This file created from the "DOC" file: UNHTHESIS.DOC
%          Make edits to that file and then use the DOC_TO_STY
%          utility to create a new version of this file.
%==============================================================

% adapted by I.C. Ruset from an older version to meet UNH 2005 summer style


%bm \oddsidemargin   1.500in        % Bound side of page has 1.5 inch margin.
%bm \topmargin       0.500in        % Header box is half inch from page top.
\evensidemargin  0.000in        % Bound side of page has 1.5 inch margin.
\oddsidemargin   0.500in        % Bound side of page has 1.5 inch margin.
\topmargin       0.200in        % Header box is half inch from page top.
%\headheight      0.250in        % Large enough for 11pt type.
%\headsep         0.250in        % This should place body 1in from top of page.
\textwidth       6.000in        % 8.5 page width - \oddsidemargin.
%bm \textheight      9.000in        % 11.0 page height - (1in top + 1in bot)
\textheight      9.00in        % 11.0 page height - (1in top + 1in bot)
\footskip        0.500in        % Place bottom numbers 1/2 inch from bottom.



\def\baselinestretch{1.7}
\footnotesep=20pt               % Increase LaTeX's default spacing between
                                % footnotes.



\def\tableofcontents{\chapter*{\sc Table of Contents\@mkboth{TABLE OF CONTENTS}{TABLE OF CONTENTS}}
  \@starttoc{toc}}



\pagenumbering{roman}                   % Set page numbering to small roman num.
\pagestyle{plain}                  % Put only page numbers in the footer
\@ifundefined{thechapter}               % If chapter counter undefined;
    {}                                  %   then do nothing;
    {\def\thefigure                     %   else define \thefigure format.
        {\thechapter-\arabic{figure}}}  %



\def\DOCUMENTtype#1{\gdef\@DOCUMENTtype{#1}}    % Define \DOCUMENTtype{}
    \def\@DOCUMENTtype{}                        % This is the ALL CAPS version.
                                                %
\def\Documenttype#1{\gdef\@Documenttype{#1}}    % Define \Documenttype{}
    \def\@Documenttype{}                        % This is the mixed case version

\def\documenttype#1{\gdef\@documenttype{#1}}    % Define \documenttype{}
    \def\@documenttype{}                        % This is the lower case version

                                                %
\def\prevdegrees#1{\gdef\@prevdegrees{#1}}      % Define \predegrees{}
\def\@prevdegrees{}                             %
                                                %
\def\major#1{\gdef\@major{#1}}                  % Define \major{}
                                                %
\def\degree#1{\setbox0\hbox{#1}                 % Define @degreeword depending
  \gdef\@degree{#1}}                            % upon how many degrees are
\def\and{\gdef\@degreeword{degrees}             % being earned.  That way
    \par and \par}                              % we can correctly say either
\def\@degreeword{degree}                        % 'degree' or 'degrees'.
                                                %
\def\thesisdate#1{\gdef\@thesisdate{#1}}        % Define \thesisdate{}
                                                %
\def\degreemonth#1{\gdef\@degreemonth{#1}}      % Define \degreemonth{}
                                                %
\def\degreeyear#1{\gdef\@degreeyear{#1}}        % Define \degreeyear{}

\def\signatureblank#1                           % Define a signature blank.
   {\hfill                                      % Rubber space pushes this
    \parbox{4in}                                % paragraph box to the right.
      {\rule{0in}{0.75in}%                      % Build a strut,
       \hrulefill\null\\*                       %  Make a signature blank
         {\large                                %  Get a larger font.
          #1                                    %  Put name/title under line.
         }                                      %
      }                                         %
   }                                            %
                                                %
\def\dateblank                                  % Define a date blank.
   {\hfill                                      % As signature blank above...
    \parbox{2.5in}                              %
      {\rule{0in}{0.75in}%                      %
       \hrulefill\null\\*                       %
         {\large Date                           %
         }                                      %
      }                                         %
   }                                            %
                                                %
                                                %
\newbox\@titlecommittee                         % Build box to hold several
                                                % committee member signatures.
                                                %
\def\committee#1#2                              % Define \committee{}{}
   {\setbox\@titlecommittee\vbox                %
      {\unvbox\@titlecommittee                  % unwrap the vbox
       \par                                     % skip down
       \begin{singlespace}                      % Get single space environment.
       \signatureblank{#1 \\ #2}                %  Do a signature line.
       \end{singlespace}                        %
      }                                         %
   }                                            %
                                                %
\def\supervisor#1#2                             % Define \supervisor{}{}
   {\gdef\@supervisorname{#1}                   % This is easier since there
    \gdef\@supervisortitle{#2}                  % is only one supervisor.
   }                                            %
                                                %
\def\UNH{UNIVERSITY OF NEW HAMPSHIRE}           % Short cuts for use in the
\def\Unh{University of New Hampshire}           % title page.
                                                %


\def\titlepage{                         % Define start of title page.
    \newpage\centering                  %  Start a new page, center the text.
    \thispagestyle{empty}               %  Don't do headers or footers.
    \parindent 0pt                      %  Don't indent 'paragraphs'.
    \parskip 10pt plus 1fil minus 1fil  %  Set spacing between 'paragraphs'.
    \def\baselinestretch{1}             %  Set spacing between lines.
    \@normalsize\vbox to                %
    \vsize\bgroup\vbox to 9in\bgroup    %
    }                                   %

\def\endtitlepage{                      % Define end of title page
    \par\kern 0pt                       %   \kern0pt pushes any depth into
    \egroup\vss\egroup                  %   the height.  (Thanks to MITTHESIS
    \newpage}                           %   author and Richard Stone.)


\def\maketitle{\begin{titlepage}
    \large
                                \vspace*{0.375in}
               {\def\baselinestretch{1.2}{\Large\bf{\@title}} \par}
                                \vspace*{\fill}\par
                                      {\normalsize BY}
                                \vspace*{\fill}\par
                               {\Large \@author}
                                     \par
                                 \@prevdegrees
                                \vspace*{\fill}\par
                                  \@DOCUMENTtype
                                \vspace*{\fill}\par
                           Submitted to the \Unh \\
                         in Partial Fulfillment of \\
                   the Requirements for the \@degreeword\ of
                                \vspace*{\fill}\par
                                   \@degree
                                     \par
                                      in
                                     \par
                                    \@major
                                \vspace*{\fill}\par
                          \@degreemonth\, \@degreeyear
                                \vspace*{\fill}
   \vskip \baselineskip
\end{titlepage}}



\def\copyrightyear#1                    % Define \copyrightyear{}
   {\gdef\@copyrightyear{#1}
   }

\newcommand{\makecopyright}
    {
      \thispagestyle{empty}
      \vspace*{\fill}
      \begin{center}
                             ALL RIGHTS RESERVED\\
                           \copyright \@copyrightyear\\
                                   \@author
      \end{center}
    }



\def\approvalpage
   {
    \thispagestyle{empty}               % Don't do headers or footers.
    \newpage                            % Start a new page.
    \parindent 0pt                      % Don't indent 'paragraphs'.
    \parskip 10pt plus 1fil minus 1fil  % Set spacing between 'paragraphs'.
    \@normalsize\vbox to
    \vsize\bgroup\vbox to 9in\bgroup
   }

\def\endapprovalpage
   {\par\kern 0pt                       % As in title page.
    \egroup\vss\egroup
   }

\def\makeapproval
   {\begin{approvalpage}
       \large
       \begin{singlespace}
         This \@documenttype\ has been examined and approved.
         \par
         \signatureblank{\@Documenttype\ Director, \@supervisorname \\
                         \@supervisortitle
                        }
         \par
         \unvbox\@titlecommittee
         \par
         \dateblank
       \end{singlespace}
       \vspace*{\fill}
    \end{approvalpage}
   }



\def\dedication
   {
    \vspace*{0.5in}             % Major sections have 1.5in top margins.
    \thispagestyle{empty}       % Put the page number on the bottom.
    \chapter*{\sc Dedication}       % Don't change section counter or display it.
    \addcontentsline{toc}       % But *do* put an entry for this page into
       {section}{\sc Dedication}    % the table of contents.
    \@normalsize                % Let it be CAPS as it appears in the thesis
   }                            %

\def\enddedication
   {
    \par
    \thispagestyle{plain} % Put pages numbers on the bottom - modified Iulian 2005
    }



\def\acknowledgments
   {\vspace*{0.5in}
    \spacing{1.9}
    \thispagestyle{plain}
    \chapter*{\sc Acknowledgments}
    \addcontentsline{toc}{section}{\sc Acknowledgments}
    \@normalsize       % Let it be CAPS as it appears in the thesis
   }
\def\endacknowledgments
   {
   \thispagestyle{plain}
   \par
   }


\def\foreword
   {\thispagestyle{plain}
    \vspace*{0.5in}
    \chapter*{\sc Foreword}
    \addcontentsline{toc}{section}{\sc FOREWORD}
    %\@normalsize       % Let it be CAPS as it appears in the thesis
   }
\def\endforeword
   {
   \thispagestyle{plain}
   \par
   }



\def\abstract
   {\small
    \addcontentsline{toc}{section}{\sc Abstract}
    \@normalsize       % Let it be CAPS as it appears in the thesis
   }

\def\endabstract
   {
   \thispagestyle{plain}
   \par
   }

\def\abstractpage
   {\newpage
    \thispagestyle{plain}
    \vspace*{0.01in}
    \begin{center}
       {\def\baselinestretch{1.2}
                         \Large\bf ABSTRACT \par\par}
                            {\large{\bf \@title} \\
                                     by \\
                                  \@author \\
                            }
                      \def\baselinestretch{1}\@normalsize
                      \Unh, \@degreemonth, \@degreeyear
    \end{center}
    \par
    \begin{abstract}
   }

\def\endabstractpage
   {
    \thispagestyle{plain}
    \end{abstract}
    \newpage
   }



\newenvironment{Squote}%
   {\begin{singlespace}\begin{quote}}%
   {\end{quote}\end{singlespace}}

\newenvironment{squotation}%
   {\begin{singlespace}\begin{quotation}}%
   {\end{quote}\end{singlespace}}



{\catcode`\^^M=13
   \gdef\@gobblecr{\@ifnextchar
                       {\@gobble}
                       {\ignorespaces}
                  }
}

{\catcode`\ =\active
    \gdef\@vobeyspaces{\catcode`\ \active \let \@xobeysp}
}

\def\@xobeysp{\leavevmode{} }

\begingroup
   \catcode `|=0
   \catcode `[= 1
   \catcode`]=2
   \catcode `\{=12
   \catcode `\}=12
   \catcode`\\=12
   |gdef|@xttytext#1\end{ttytext}[#1|end[ttytext]]
   |gdef|@sxttytext#1\end{ttytext*}[#1|end[ttytext*]]
|endgroup

\def\@sttytext{\obeyspaces\@ttytext}

\def\@gobble#1{}

\def\@ttytext
{  \trivlist
   \item[]\if@minipage\else\vskip\parskip\fi
   \leftskip\@totalleftmargin\rightskip\z@
   \parindent\z@\parfillskip\@flushglue\parskip\z@
   \@tempswafalse \def\par{\if@tempswa\hbox{}\fi\@tempswatrue\@@par}
   \obeylines \tt \catcode``=13 \@noligs \let\do\@makeother \dospecials
}

\def\ttytext
{   \begin{singlespace}
    \vskip -1em
    \small
    \@ttytext \frenchspacing\@vobeyspaces \@xttytext
}

\def\endttytext
{  \endtrivlist
   \normalsize
   \vskip -0em
   \end{singlespace}%
}

\@namedef{ttytext*}{\@ttytext\@sxttytext}
\expandafter\let\csname endttytext*\endcsname =\endtrivlist

\def\@makeother#1{\catcode`#112\relax}

\def\TTY{\begingroup \catcode``=13 \@noligs
\tt \let\do\@makeother \dospecials
\@ifstar{\@sTTY}{\@TTY}}

\def\@sTTY#1{\def\@tempa ##1#1{##1\endgroup}\@tempa}

\def\@TTY{\obeyspaces \frenchspacing \@sTTY}


\begingroup
\catcode``=13
\gdef\@noligs{\let`=\@lquote}
\endgroup

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%                                                                 %
%  Addition of List of figures and tables into the contents page. %
%  By Burcin Donmez. 12/04/2005                                   %
%                                                                 %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\listoffigures
{\begin{doublespace}
        \addcontentsline{toc}{section}{\sc List of Figures}
    \chapter*{\sc List of Figures}
        \@starttoc{lof}
        \end{doublespace}
}

\def\listoftables
{\begin{doublespace}
        \addcontentsline{toc}{section}{\sc List of Tables}
    \chapter*{\sc List of Tables}
     \@starttoc{lot}
        \end{doublespace}
}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% Added from unh11.sty for centering chapter names
% 12/04/05 Burcin Donmez
%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\@makechapterhead#1{               % Heading for \chapter command
%  \vspace*{40pt}                        % (UNH): [50] Space at top of text page.
  \vspace*{-0.3in}                        % (UNH): [50] Space at top of text page.
  { \parindent 0pt \raggedright
    \ifnum \c@secnumdepth >\m@ne       % IF secnumdepth > -1 THEN
      \begin{center}               % UNH - Center the chapter headings.
      \huge\bf\sc \@chapapp{} \thechapter % Print 'Chapter' and number.
    \par
      \vskip 10pt \fi                  % (UNH):[20] Space between Chap & title.
      \Large \bf                        % Title.
    #1\par
      \end{center}             % UNH - end the centering...
    \nobreak                           % TeX penalty to prevent page break.
    \vskip 20pt                        % (UNH):[40] Space between title & text.
  } }


\def\@makeschapterhead#1{              % Heading for \chapter* command
    \vspace*{-20pt}                        % (UNH):[50] Space at top of page.
  { \parindent 0pt \raggedright
    \begin{center}                     % UNH - Center the chapter headings.
    \Large \bf                          % Title.
    #1\par
    \end{center}                       % UNH - end the centering...
    \nobreak                           % TeX penalty to prevent page break.
    \vskip 20pt                        % (UNH):[40] Space between title & text.
  } }


\def\chapter{\clearpage      % Starts new page.
   \thispagestyle{plain}     % Page style of chapter page is 'plain'
   \global\@topnum\z@        % Prevents figures from going at top of page.
   \@afterindentfalse        % Suppresses indent in first paragraph.  Change
   \secdef\@chapter\@schapter}   % to \@afterindenttrue to have indent.

\def\@chapter[#1]#2{\ifnum \c@secnumdepth >\m@ne
        \refstepcounter{chapter}
        \typeout{\@chapapp\space\thechapter.}
        \addcontentsline{toc}{chapter}{\protect
        \numberline{\thechapter}#1}\else
      \addcontentsline{toc}{chapter}{#1}\fi
   \chaptermark{#1}
   \addtocontents{lof}{\protect\addvspace{10pt}} % Adds between-chapter space
   \addtocontents{lot}{\protect\addvspace{10pt}} % to lists of figs & tables.
   \if@twocolumn                                 % Tests for two-column mode.
           \@topnewpage[\@makechapterhead{#2}]
     \else \@makechapterhead{#2}
           \@afterheading                  % Routine called after chapter and
     \fi}                                  % section heading.

\def\@schapter#1{\if@twocolumn \@topnewpage[\@makeschapterhead{#1}]
        \else \@makeschapterhead{#1}
              \@afterheading\fi}