Skip to content

Latest commit

 

History

History
1277 lines (888 loc) · 66.1 KB

DEVELOPMENT.md

File metadata and controls

1277 lines (888 loc) · 66.1 KB
Raw

The Things Stack for LoRaWAN Development

The Things Stack components are primarily built in Go, we use React for web front-ends. It is assumed that you have decent knowledge and experience with these technologies. If you want to get more familiar with Go, we strongly recommend to take A Tour of Go.

Development Environment

The Things Network's development tooling uses Mage. Under the hood, mage calls other tools such as git, go, yarn, docker etc. Recent versions are supported; Node v20.x and Go v1.21.x.

Cloning the Repository

If you are unfamiliar with forking projects on GitHub or cloning them locally, please see the GitHub documentation.

Getting Started

The first step to get started is to initialize tooling and some dependencies:

$ make init

You may want to run this commands from time to time to stay up-to-date with changes to tooling and dependencies.

Running a development build of The Things Stack

This section explains how to get a bare-bones version of The Things Stack running on your local machine. This will build whatever code is present in your local repository (along with local changes) and run in it using the default ports.

If you want to just run a docker image of The Things Stack, then check the Installation section of the documentation.

Pre-requisites

  1. This section requires that the required tools from Development Environment are installed.
  2. This repository must be cloned inside the GOPATH. Check the official documentation on working with GOPATH.
  3. Make sure that you've run $ make init before continuing.
  4. If this is not the first time running the stack, make sure to clear any environment variables that you've been using earlier. You can do check what variables are set currently by using
$ printenv | grep "TTN_LW_*"

Steps

  1. Build the frontend assets
$ tools/bin/mage js:build

This will build the frontend assets and place it in the public folder.

  1. Start the databases
$ tools/bin/mage dev:dbStart # This requires Docker to be running.

This will start one instance each of postgres and Redis as Docker containers. To verify this, you can run

$ docker ps
  1. Initialize the database with defaults.
$ tools/bin/mage dev:initStack

This creates a database, migrates tables and creates a user admin with password admin.

  • An API Key for the admin user with RIGHTS_ALL is also created and stored in .env/admin_api_key.txt.
  1. Start a development instance of The Things Stack
$ go run ./cmd/ttn-lw-stack -c ./config/stack/ttn-lw-stack.yml start
  1. Run the Frontend with
$ tools/bin/mage js:serve
  1. Login to The Things Stack via the Console

In a web browser, navigate to http://localhost:1885/ and login using credentials from step 3.

  1. Customizing configuration

To customize the configuration, copy the configuration file /config/stack/ttn-lw-stack.yml to a different location (ex: the .env folder in your repo). The configuration is documented in the Configuration Reference.

You can now use the modified configuration with

$ go run ./cmd/ttn-lw-stack -c <custom-location>/ttn-lw-stack.yml start

Using the CLI with the Development Environment

In order to login, you will need to use the correct OAuth Server Address. make init uses CFSSL to generate a ca.pem CA certificate to support https:

$ export TTN_LW_CA=./ca.pem
$ export TTN_LW_OAUTH_SERVER_ADDRESS=https://localhost:8885/oauth
$ go run ./cmd/ttn-lw-cli login

Managing the Development Databases

You can use the following commands to start, stop and erase databases.

$ tools/bin/mage dev:dbStart # Starts all databases in a Docker container.
$ tools/bin/mage dev:dbStop  # Stops all databases.

# The contents of the databases will be saved in .env/data

$ tools/bin/mage dev:dbErase # Stops all databases and erase storage.

PostgreSQL

PostgreSQL is a SQL database that we use in the Identity Server.

You can use tools/bin/mage dev:dbSQL to enter an SQL shell.

Redis

Redis is an in-memory data store that we use as a database for "hot" data.

You can use tools/bin/mage dev:dbRedisCli to enter a Redis-CLI shell.

Building the Frontend

You can use tools/bin/mage js:build to build the frontend.

Starting The Things Stack

You can use go run ./cmd/ttn-lw-stack start to start The Things Stack.

Codec

Most data is stored as base64-encoded protocol buffers. For debugging purposes it is often useful to inspect or update the stored database models - you can use Redis codec tool located at ./pkg/redis/codec to decode/encode them to/from JSON.

Examples
Get and Decode
$ redis-cli get "ttn:v3:ns:devices:uid:test-app:test-dev" | go run ./pkg/redis/codec -type 'ttnpb.EndDevice'
Get, Decode, Modify, Encode and Set
$ redis-cli get "ttn:v3:ns:devices:uid:test-app.test-dev" \
  | go run ./pkg/redis/codec -type 'ttnpb.EndDevice' \
  | jq '.supports_join = false' \
  | go run ./pkg/redis/codec -type 'ttnpb.EndDevice' -encode \
  | redis-cli -x set "ttn:v3:ns:devices:uid:test-app.test-dev"

Project Structure

The folder structure of the project looks as follows:

.
├── .editorconfig       configuration for your editor, see editorconfig.org
├── CODEOWNERS          maintainers of folders who are required to approve pull requests
├── CONTRIBUTING.md     guidelines for contributing: branching, commits, code style, etc.
├── DEVELOPMENT.md      guide for setting up your development environment
├── docker-compose.yml  deployment file (including databases) for Docker Compose
├── Dockerfile          formula for building Docker images
├── LICENSE             the license that explains what you're allowed to do with this code
├── Makefile            dev/test/build tooling
├── tools               dev/test/build tooling
├── README.md           general information about this project
│   ...
├── api                 contains the protocol buffer definitions for our API
├── cmd                 contains the different binaries that form The Things Stack for LoRaWAN
│   ├── internal        contains internal files shared between the different binaries
│   │   ...
│   ├── ttn-lw-cli      the command-line-interface for The Things Stack for LoRaWAN
│   └── ttn-lw-stack    bundles the server binaries that form The Things Stack for LoRaWAN
├── config              configuration for our JavaScript SDK and frontend
├── data                data from external repositories, such as devices, frequency plans and webhook templates
├── doc                 detailed documentation on the workings of The Things Stack for LoRaWAN
├── pkg                 contains all libraries used in The Things Stack for LoRaWAN
│   ├── component       contains the base component; all other components extend this component
│   ├── config          package for configuration using config files, environment and CLI flags
│   ├── console         package that provides the web server for the console
│   ├── errors          package for rich errors that include metadata and cross API boundaries
│   ├── log             package for logging
│   ├── messages        contains non-proto messages (such as the messages that are sent over MQTT)
│   ├── metrics         package for metrics collection
│   ├── ttnpb           contains generated code from our protocol buffer definitions and some helper functions
│   ├── types           contains primitive types
│   ├── webui           contains js code for the console and oauth provider
│   └── ...
├── public              frontend code will be compiled to this folder - not added to git
├── release             binaries will be compiled to this folder - not added to git
└── sdk                 source code for our SDKs
    └── js              source code for our JavaScript SDK

API

Our APIs are defined in .proto files in the api folder. These files describe the messages and interfaces of the different components of The Things Stack. If this is the first time you hear the term "protocol buffers" you should probably read the protocol buffers documentation before you continue.

From the .proto files, we generate code using the protoc compiler. As we plan to compile to a number of different languages, we decided to put the compiler and its dependencies in a Docker image. The actual commands for compilation are handled by our tooling, so the only thing you have to execute when updating the API, is:

$ tools/bin/mage proto:clean proto:all jsSDK:definitions

Documentation

The documentation site for The Things Stack is built from the lorawan-stack-docs repository.

Web UI

The Things Stack for LoRaWAN includes two frontend applications: the Console and Account App. Both applications use React as frontend framework. The console and account packages of the backend expose their respective web servers and handle all logic that cannot be done in the browser. Otherwise both applications are single page applications (SPA) that run entirely in the browser.

The folder structure of the frontend looks as follows:

./pkg/webui
├── assets            assets (eg. vectors, images) used by the frontend
├── components        react components shared throughout the frontend
├── console           root of the console application
│   ├── api           api definitions to communicate with The Things Stack
│   ├── containers    container components
│   ├── lib           utility classes and functions
│   ├── store         redux actions, reducers and logic middlewares
│   ├── views         whole view components of the console (~pages)
├── containers        global react container components
├── lib               global utility classes and functions
├── locales           frontend and backend locale jsons used for i18n
├── oauth             root of the oauth application
│   ├── api           api definitions to communicate with The Things Stack
│   ├── store         redux actions, reducers and logic middlewares
│   ├── views         whole view components of the oauth provider (~pages)
├── styles            global stylus (~css) styles and mixins
├── console.js        entry point of the console app
├── oauth.js          entry point of the oauth app
├── template.go       go template module used to render the frontend HTML

Development Configuration

To use a convenient interactive launcher for the development environments without any further setup required, please see the (interactive development stack launcher tool)[#interactive-development-stack-launcher-tool]

In order to set up The Things Stack to support running the frontend via webpack-dev-server, the following environment setup is needed:

# .dev.env
export NODE_ENV="development"
export TTN_LW_LOG_LEVEL="debug"
export TTN_LW_IS_OAUTH_UI_JS_FILE="libs.bundle.js account.js"
export TTN_LW_CONSOLE_UI_JS_FILE="libs.bundle.js console.js"
export TTN_LW_CONSOLE_UI_CANONICAL_URL="http://localhost:8080/console"
export TTN_LW_CONSOLE_OAUTH_AUTHORIZE_URL="http://localhost:8080/oauth/authorize"
export TTN_LW_CONSOLE_OAUTH_LOGOUT_URL="http://localhost:8080/oauth/logout"
export TTN_LW_CONSOLE_OAUTH_TOKEN_URL="http://localhost:8080/oauth/token"
export TTN_LW_IS_OAUTH_UI_CANONICAL_URL="http://localhost:8080/oauth"
export TTN_LW_IS_EMAIL_NETWORK_IDENTITY_SERVER_URL="http://localhost:8080/oauth.js"
export TTN_LW_CONSOLE_UI_ASSETS_BASE_URL="http://localhost:8080/assets"
export TTN_LW_IS_EMAIL_PROVIDER="dir"
export TTN_LW_IS_EMAIL_DIR=".dev/email"

export TTN_LW_CONSOLE_UI_IS_BASE_URL="http://localhost:8080/api/v3"
export TTN_LW_CONSOLE_UI_AS_BASE_URL="http://localhost:8080/api/v3"
export TTN_LW_CONSOLE_UI_NS_BASE_URL="http://localhost:8080/api/v3"
export TTN_LW_CONSOLE_UI_JS_BASE_URL="http://localhost:8080/api/v3"
export TTN_LW_CONSOLE_UI_GS_BASE_URL="http://localhost:8080/api/v3"
export TTN_LW_CONSOLE_UI_EDTC_BASE_URL="http://localhost:8080/api/v3"
export TTN_LW_CONSOLE_UI_GCS_BASE_URL="http://localhost:8080/api/v3"
export TTN_LW_CONSOLE_UI_QRG_BASE_URL="http://localhost:8080/api/v3"

export TTN_LW_IS_OAUTH_UI_IS_BASE_URL="http://localhost:8080/api/v3"

We recommend saving this configuration as an .dev.env file and sourcing it like source .dev.env. This allows you to easily apply development configuration when needed.

The development server can also be run with a staging environment (.staging.env) with the following set up:

# .staging.env
export NODE_ENV="development"
export TTN_LW_LOG_LEVEL="debug"

export TTN_LW_AS_WEBHOOKS_TEMPLATES_DIRECTORY="<GOPATH>/src/github.com/TheThingsNetwork/webhook-templates"
export TTN_LW_CONSOLE_OAUTH_AUTHORIZE_URL="https://tti.staging1.cloud.thethings.industries/oauth/authorize"
export TTN_LW_CONSOLE_OAUTH_LOGOUT_URL="https://tti.staging1.cloud.thethings.industries/oauth/logout"
export TTN_LW_CONSOLE_OAUTH_TOKEN_URL="https://tti.staging1.cloud.thethings.industries/oauth/token"
export TTN_LW_CONSOLE_UI_ASSETS_BASE_URL="http://localhost:8080/assets"
export TTN_LW_CONSOLE_UI_CANONICAL_URL="http://localhost:8080/console"
export TTN_LW_CONSOLE_UI_JS_FILE="libs.bundle.js console.js paint.js"
export TTN_LW_IS_OAUTH_UI_CANONICAL_URL="http://localhost:8080/oauth"
export TTN_LW_IS_OAUTH_UI_JS_FILE="libs.bundle.js oauth.js"

export TTN_LW_CONSOLE_UI_SUPPORT_LINK="https://thethingsstack.io"

export TTN_LW_CONSOLE_UI_IS_BASE_URL="https://tti.staging1.cloud.thethings.industries/api/v3"
export TTN_LW_CONSOLE_UI_AS_BASE_URL="https://tti.staging1.cloud.thethings.industries/api/v3"
export TTN_LW_CONSOLE_UI_NS_BASE_URL="https://tti.staging1.cloud.thethings.industries/api/v3"
export TTN_LW_CONSOLE_UI_GS_BASE_URL="https://tti.staging1.cloud.thethings.industries/api/v3"
export TTN_LW_CONSOLE_UI_JS_BASE_URL="https://tti.staging1.cloud.thethings.industries/api/v3"
export TTN_LW_CONSOLE_UI_QRG_BASE_URL="https://tti.staging1.cloud.thethings.industries/api/v3"
export TTN_LW_CONSOLE_UI_EDTC_BASE_URL="https://tti.staging1.cloud.thethings.industries/api/v3"

export TTN_LW_CONSOLE_OAUTH_CLIENT_ID="localhost-console"
export TTN_LW_CONSOLE_OAUTH_CLIENT_SECRET="console"

export TTN_LW_TLS_CERTIFICATE=<GOPATH>/src/github.com/TheThingsNetwork/lorawan-stack/cert.pem
export TTN_LW_TLS_KEY=<GOPATH>/src/github.com/TheThingsNetwork/lorawan-stack/key.pem
export TTN_LW_TLS_ROOT_CA=<GOPATH>/src/github.com/TheThingsNetwork/lorawan-stack/cert.pem
export TTN_LW_TLS_SOURCE="file"
export TTN_LW_TLS_INSECURE_SKIP_VERIFY="true"

Note: It is important to source these environment variables in all terminal sessions that run The Things Stack or the tools/bin/mage commands. Failing to do so will result in erros such as blank page renders. See also troubleshooting.

Optional Configuration

Disable Hot Module Replacement

If you experience trouble seeing the WebUIs updated after a code change, you can also disable hot module replacement and enforce a hard reload on code changes instead. This method is a bit slower but more robust. To do so apply the following variable:

WEBPACK_DEV_SERVER_DISABLE_HMR="true"

Note: Webpack-related configuration can be loaded from environment variables only. It cannot be sourced from a config file.

Enable TLS in webpack-dev-server
WEBPACK_DEV_SERVER_USE_TLS="true"

This option uses the key and certificate set via TTN_LW_TLS_KEY and TTN_LW_TLS_CERTIFICATE environment variables. Useful when developing functionalities that rely on TLS.

Note: To use this option, The Things Stack for LoRaWAN must be properly setup for TLS. You can obtain more information about this in the Getting Started section of the The Things Stack for LoRaWAN documentation.

Serving

For development purposes, the frontend can be run using webpack-dev-server. After following the Getting Started section to initialize The Things Stack and doing an initial build of the frontend via tools/bin/mage js:build, and setting up the correct environment, it can be served using:

$ export NODE_ENV=development
$ tools/bin/mage js:serve

The development server runs on http://localhost:8080 and will proxy all API calls to port 1885. The serve command watches any changes inside pkg/webui and refreshes automatically.

Interactive development stack launcher tool

In order to easily launch development environments in different deployment contexts, this mage target configures and starts a development environment for The Things Stack, allowing users to choose between local and staging environments, enable branding, and configure cloud-hosted mock setups. You can launch it via:

$ tools/bin/mage dev:serveDevWebui

It will interactively guide you through the desired setup and launches the The Things Stack Enterprise as well as a frontend development server wia webpack.

Code Style

Code Formatting

We want our code to be consistent across our projects, so we'll have to agree on a number of formatting rules. These rules should usually usually be applied by your editor. Make sure to install the editorconfig plugin for your editor.

Our editorconfig contains the following rules:

  • We use the utf-8 character set.
  • We use LF line endings.
  • We have a final newline in each file.
  • We we trim whitespace at the end of each line (except in Markdown).
  • All .go files are indented using tabs
  • The Makefile and all .make files are indented using tabs
  • All other files are indented using two spaces

Line Length

We don't have strict rules for line length, but in our experience the following guidelines result in nice and readable code:

  • If a line is longer than 80 columns, try to find a "natural" break
  • If a line is longer than 120 columns, insert a line break
  • In very special cases, longer lines are tolerated

Formatting and Linting

Go code can be automatically formatted using tools such as gofmt and goimports. The Go language server can also help with formatting code. There are many editor plugins that automatically format your code when you save your files. We highly recommend using those.

We use golangci-lint to lint Go code and eslint to lint JavaScript code. These tools should automatically be installed when initializing your development environment.

Documentation Site

Please respect the following guidelines for content in our documentation site. A copy and paste template for creating new documentation can be found here.

  • Use the {{< new-in-version "3.8.5" >}} shortcode to tag documentation for features added in a particular version. For documentation that targets v3.n, that's the next patch bump, e.g 3.8.x. For documentation targeting v3.n+1 that's the next minor bump, e.g 3.9.0.
  • The title of a doc page is already rendered by the build system as a h1, don't add an extra one.
  • Use title case for headings.
  • A documentation page starts with an introduction, and then the first heading. The first paragraph of the introduction is typically a summary of the page. Use a <!--more--> to indicate where the summary ends.
  • Divide long documents into separate files, each with its own folder and _index.md.
  • Use the weighttag in the Front Matter to manually sort sections if necessary. If not, they will be sorted alphabetically.
  • Since the title is a h1, everything in the content is at least h2 (##).
  • Paragraphs typically consist of at least two sentences.
  • Use an empty line between all blocks (headings, paragraphs, lists, ...).
  • Prefer text over bullet lists or enumerations. For bullets, use -, for enumerations 1. etc.
  • Explicitly call this product "The Things Stack". Not "the stack" etc. You can use the shortcode {{% tts %}} which will expand to "The Things Stack".
  • Avoid shortening, i.e. write "it is" instead of "it's".
  • Write guides as a goal-oriented journey.
  • Unless already clear from context, use a clearer term than "user", especially if there are multiple kinds (network operator, gateway owner, application developer, ...).
  • The user does not have a gender (so use they/them/their).
  • Taking screenshots is done as follows:
    • In Chrome: activate the Developer Tools and toggle the Device Toolbar. In the Device Toolbar, select Laptop with HiDPI screen (add it if not already there), and click Capture Screenshot in the menu on the right.
    • In Firefox: enter Responsive Design Mode. In the Device Toolbar, select "Laptop with HiDPI screen" (add it if not already there) and Take a screenshot of the viewport.
  • Use **Strong** when referring to buttons in the Console.
  • Use >Note:to add a note.
  • Use fenced code blocks with a language:
    • bash for lists of environment variables: SOME_ENV="value".
    • bash for CLI examples. Prefix commands with $ . Wrap strings with double quotes "" (except when working with JSON, which already uses double quotes).
    • Wrap large CLI output with <details><summary>Show CLI output</summary> ... output here ... </details>.
    • yaml (not yml) for YAML. Wrap strings with single quotes '' (because of frequent Go templates that use double quotes).

Naming Guidelines

API Method Naming

All API method names should follow the naming convention of VerbNoun in upper camel case, where the verb uses the imperative mood and the noun is the resource type.

The following snippet defines the basic CRUD definitions for a resource named Type. Note also that the order of the methods is defined by CRUD.

CreateType
GetType
ListTypes (returns slice)
UpdateType
DeleteType

AddTypeAttribute
SetTypeAttribute
GetTypeAttribute
ListTypeAttributes (returns slice)
RemoveTypeAttribute

Variable Naming

Variable names should be short and concise.

We follow the official go guidelines and try to be consistent with Go standard library as much as possible, everything not defined in the tables below should follow Go standard library naming scheme. In general, variable names are English and descriptive, omitting abbreviations as much as possible (except for the tables below), as well as putting adjectives and adverbs before the noun and verb respectively.

Single-word Entities

entity name example type
context ctx context.Context
mutex mu sync.Mutex
configuration conf go.thethings.network/lorawan-stack/v3/pkg/config.Config
logger logger go.thethings.network/lorawan-stack/v3/pkg/log.Logger
message msg go.thethings.network/lorawan-stack/v3/api/gateway.UplinkMessage
status st go.thethings.network/lorawan-stack/v3/api/gateway.Status
server srv go.thethings.network/lorawan-stack/v3/pkg/networkserver.Server
ID id string
unique ID uid string
counter cnt int
gateway gtw
application app
end device dev
user usr / user
transmit tx / Tx
receive rx / Rx

The EUI naming scheme can be found in the well-known variable names section bellow.

2-word Entities

In case both of the words have an implementation-specific meaning, the variable name is the combination of first letter of each word.

entity name
wait group wg
Application Server as
Gateway Server gs
Identity Server is
Join Server js
Network Server ns

In case one of the words specifies the meaning of the variable in a specific language construct context, the variable name is the combination of abbrevations of the words.

Well-known Variable Names

These are the names of variables that occur often in the code. Be consistent in naming them, even when their meaning is obvious from the context.

entity name
gateway ID gtwID
gateway EUI gtwEUI
application ID appID
application EUI appEUI
join EUI joinEUI
device ID devID
device EUI devEUI
user ID usrID / userID

Event Naming

Events are defined with

events.Define("event_name", "event description")

The event name is usually of the form component.entity.action. Examples are ns.up.receive_duplicate and is.user.update. We have some exceptions, such as ns.up.join.forward, which is specifically used for join messages.

The event description describes the event in simple English. The description is capitalized by the frontend, so the message should be lowercase, and typically doesn't end with a period. Event descriptions will be translated to different languages.

Error Naming

Errors are defined with

errors.Define<Type>("error_name", "description with `{attribute}`", "other", "public", "attributes")

Error definitions must be defined as close to the return statements as possible; in the same package, and preferably above the concerning function(s). Avoid exporting error definitions unless they are meaningful to other packages, i.e. for testing the exact error definition. Keep in mind that error definitions become part of the API.

Prefer using a specific error type, i.e. errors.DefineInvalidArgument(). If you are using a cause (using WithCause()), you may use Define() to fallback to the cause's type.

The error name in snake case is a short and unique identifier of the error within the package. There is no need to append _failed or _error or prepend failed_to_ as an error already indicates something went wrong. Be consistent in wording (i.e. prefer the more descriptive missing_field over no_field), order (i.e. prefer the more clear missing_field over field_missing) and avoid entity abbreviations.

The error description in lower case, with only names in title case, is a concise plain English text that is human readable and understandable. Do not end the description with a period. You may use attributes, in snake case, in the description defined between backticks (`) by putting the key in curly braces ({ }). See below for naming conventions. Only provide primitive types as attribute values using WithAttributes(). Error descriptions will be translated to different languages.

Log Field Keys, Event Names, Error Names, Error Attributes and Task Identifiers

Any name defined in the following statements:

  • Logging field key: logger.WithField("name", "value")
  • Event name: events.Define("name", "description")
  • Error name: errors.Define("name", "description")
  • Error attribute: errors.Define("example", "description `{name}`")
  • Task identifier: c.RegisterTask("name", ...)

Shall be snake case, optionally having an event name prepended with a dotted namespace, see above. The spacer _ shall be used in LoRaWAN terms: DevAddr is dev_addr, AppSKey is app_s_key, etc.

Comments

All comments should be English sentences, starting with a capital letter and ending with a period.

Every Go package should have a package comment. Every top-level Go type, const, var and func should have a comment. These comments are recognized by Go's tooling, and added to the Godoc for our code. See Effective Go for more details.

Although Go code should typically explain itself, it's sometimes important to add additional comments inside funcs to communicate what a block of code does, how a block of code does that, or why it's implemented that way.

Comments can also be used to indicate steps to take in the future (TODOs). Such comments look as follows:

// TODO: Open the pod bay doors (https://github.com/TheThingsNetwork/lorawan-stack/issues/<number>).

In our API definitions (.proto files) we'd like to see short comments on every service, method, message and field. Code that is generated from these files does not have to comply with guidelines (such as Go's guideline for starting the comment with the name of the thing that is commented on).

JavaScript Code Style

For our frontend development, we use a syntax based on ES6 with a couple of extensions from later standards. The code is transpiled via webpack using babel to be interpreted by the browser or Node.JS.

Code Formatting

We use prettier and eslint to conform our code to our guidelines as far as possible. Committed code that violates these rules will cause a CI failure. For your convenience, it is hence recommended to set up your development environment to apply autoformatting on every save. We usually don't enforce any formatting or styles that go beyond of what we can ensure using our linting setup. You can check the respective configuration in /config/eslintrc.yaml, /config/.prettierrc.yaml as well as the global .editorconfig.

To run the linter, you can use mage js:lint and to format all JavaScript files, you can run mage js:fmt.

Code Comments

Additionally to the overall code comment rules outlined above, we use JSDoc-conform documentation of classes and functions. We also use full English sentences and ending sentence periods here.

Please make sure that these multi-line comments follow the correct format, especially leaving the first line of this multiline JSDoc comments empty:

// Bad.

/** Converts a byte string from hex to base64.
 * @param {string} bytes - The bytes, represented as hex string.
 * @returns {string} The bytes, represented as base64 string.
 */

// Good.

/**
 * Converts a byte string from hex to base64.
 * @param {string} bytes - The bytes, represented as hex string.
 * @returns {string} The bytes, represented as base64 string.
 */

It also makes sense to wrap code bits, variable names and URLs in `` quotes, so they can easily be recognized and do not clash with our capitalization rules enforced by eslint, when they are at the beginning of a sentence:

// Bad. This will get flagged by the linter.

// devAddr is a hex string.
const devAddr = '270000FF'

// Good.

// `devAddr` is a hex string.
const devAddr = '270000FF'

Import Statement Order

Our import statements use the following order, each separated by empty newlines:

  1. Node "builtin" modules (e.g. path)
  2. External modules (e.g. react)
  3. Internal modules (e.g. @ttn-lw/*, @console, etc.)
  4. Constants
  5. API module
  6. Components 1. Global presentational components (@ttn-lw/components/*) 2. Global container components (@ttn-lw/containers/*) 3. Global utility components (@ttn-lw/lib/components/*) 4. Local presentational components (@{console|oauth}/components/*) 5. Local container components (@{console|oauth}/containers/*) 6. Local utility components (@{console|oauth}/lib/components/*) 7. View components (@{console|oauth}/views/*)
  7. Utilities 1. Global utilities (@ttn-lw/lib/*) 2. Local utilities (@{console|oauth}/lib/*)
  8. Store modules 1. Actions 2. Reducers 3. Selectors 4. Middleware and logics
  9. Assets and styles
  10. Parent modules (e.g. ../../../module)
  11. Sibling modules (e.g. ./validation-schema, ./button.styl)
  12. Index of the current directory (.)

Note that this order is enforced by our linter and will cause a CI fail when not respected. Again, settting up your development environment to integrate linting will assist you greatly here.

React Component Syntax (Functional, Class Components and Hooks)

Lately, we have been embracing react hooks and write all new components using this approach. However, there are a lot of class components from the time before react hooks which we will try to refactor successively.

A note on decorators and HOCs

Decorators provided an easy syntax to wrap Classes around functions and we have used this syntax extensively during early stages of development. We now consider decorators and HOCs as hindrance with regards to our aim to adopt hooks. As a result, we refrain from introducing new higher order components and implement hooks instead. This will help us avoiding decorators as well as literal (concatenated) wrappers for function components.

React Component Types

We differentiate four different component scopes:

  • Presentational Components (global and application level)
  • Container Components (global and application level)
  • View Components
  • Utility Components (global and application level)

The differentiation is not always 100% clear and we tend not to be too dogmatic about it. Additionally, the introduction of react hooks tends too break up these traditional categorizations even more and might necessitate a review of these in the near future.

Generally we understand these component types as follows:

Presentational Components

These are UI elements that primarily serve a presentational purpose. They implement the basic visual interface elements of the application, focusing on interaction and plain UI logic. They never connect to the store or perform any data fetching or have any other side effects and render rich DOM trees which are also styled according to our design guidelines.

Examples for presentational components are simple UI elements such as buttons, input elements, navigations, breadcrumbs. They can also combine and extend functionality of other presentational components by composition to achieve more complex elements, such as forms. We also regard our application specific forms as such components, as long as they don't connect to the store or perform the data fetching themselves.

To decide whether a component is a presentational component, ask yourself:

  • Is this component more concerned with how things look, rather than how things work?
  • Does this component use no state or only UI state?
  • Does this component not fetch or send data?
  • Does this component render a lot of (nested and styled) DOM nodes?

If you answered more than 2 questions with yes, then you likely have a presentational component.

Presentational components should always define storybook stories, to provide usage information for other developers.

Container Components

Container components focus more on state logic, data fetching, store management and similar concerns. They usually perform business logic and eventually render results using presentational components.

An example for a container components are our table components, that manage the fetching and preparation of the respective entity and render the result using our <Table /> component.

To decide whether a component is a container component, ask yourself:

  • Is this component more concerned with how things work, rather than how things look?
  • Does this component connect to the store?
  • Does this component fetch or send data?
  • Is the component generated by higher order components?
  • Does this component render simple nodes, like a single presentational component?

If you can answer more than 2 questions with yes, then you likely have a container component.

View components

View components always represent a single view of the application, represented by a single route. They structurize the overall appearance of the page, obtain global state information, fetch necessary data and pass it down (implicitly via the store or explicitly as props) mostly to container components, but also to presentational components. Usually, these components also define submit and error handlers of the forms that they render. Otherwise, these components should not employ excessive (stateful) logic which should rather be handled by container components. It should focus on globally structurizing the page using the grid system and respective containers.

View component checklist
  • Conciseness and no stateful logic (use containers instead)
  • Uses <PageTitle /> component to define heading and page title
  • Uses breadcrumbs (if within breadcrumb view)
  • Fetching necessary data (via withRequest HOC), if not done by a container
  • Unavailable "catch-all"-routes are caught by <NotFoundRoute /> component, including subviews
  • Errors should be caught by the <ErrorView /> error boundary component
  • Ensured responsiveness and usage of the grid system

Utility components

These components do not render any DOM elements and are hence not visible by themselves. Utility components can be higher order components or similar components, that modify their children or introduce a side effect to the render tree.

To decide whether a component is a utility component ask yourself:

  • Is this component a higher order component?
  • Is this component invisible on its own?
  • Is this component an abstraction layer on top of another component?

If you can answer at least one of those questions with yes, then you likely have a container component.

Global or Application Scope?

Components can be categorized as either local (e.g. pkg/webui/{console|oauth}/{components|containers}) or global (e.g. pkg/webui/{components|containers}). The distinction should come naturally: Global components are ones that can be used universally in every application. Local components are tied to a specific use case inside the respective application.

Sometimes, you might find that during implementing an application specific component that it can actually be generalized without much refactoring and hence be a useful addition to our global component library.

Frontend Related Pull Requests

Pull requests for frontend related changes generally follow our overall pull request scheme. However, in order to assist reviewers, a browser screenshot of the changes is included in the PR comment, if applicable.

It might help you to employ the following checklist before opening the pull request:

  • All visible text is using i18n messages?
  • Assets minified or compressed if possible (e.g. SVG assets)?
  • Screenshot in PR description?
  • Responsiveness checked?
  • New components categorized correctly (global/local, container/component)?
  • Feature flags added (if applicable)?
  • All views use <PageTitle /> or <IntlHelmet /> properly?
  • Storybook story added / updated?
  • Prop types / default props added?

Translations

We do our best to make all text that could be visible to users available for translation. This means that all text of the console's user interface, as well as all text that it may forward from the backend, needs to be defined in such a way that it can be translated into other languages than English.

Backend Translations

In the API, the enum descriptions, error messages and event descriptions available for translation. Enum descriptions are defined in pkg/ttnpb/i18n.go. Error messages and event descriptions are defined with errors.Define(...) and events.Define(...) respectively.

These messages are then collected in the config/messages.json file, which will be processed in the frontend build process, but may also be used by other (native) user interfaces. When you define new enums, errors or events or when you change them, the messages need to be updated into the config/messages.json file.

$ tools/bin/mage go:messages

If you forget to do so, this will cause a CI failure.

Adding translations of messages to other languages than English is a matter of adding key/value pairs to translations in config/messages.json.

Frontend Translations

The frontend uses react-intl, which helps us greatly to define text messages used in the frontend.

The workflow for defining messages is as follows:

  1. Add a react-intl message using intl.defineMessages({…})
  • This can be done either inline, or by adding it to pkg/webui/lib/shared-messages.js
  1. Use the message in components (e.g. sharedMessage.myMessage)

After adding messages this way, it needs to be added the locales file pkg/webui/locales/*.js by using:

$ tools/bin/mage js:translations

Note: When using tools/bin/mage js:serve, this command will be run automatically after any change.

The message definitions in pkg/webui/locales can be used to provide translations in other languages (e.g. fr.js). Keep in mind that locale files are checked in and committed, any discrepancy in the locales file with the defined messages will lead to a CI failure.

Events

In addition to the previously described translation file that we generate, we also generate a data file that contains all event definitions. This file is then loaded by the documentation system so that we can generate documentation for our events.

After adding or changing events, regenerate this file with:

$ tools/bin/mage go:eventData

Testing

Unit Tests

To run unit tests, use the following mage targets:

$ tools/bin/mage go:test js:test jsSDK:test

End-to-end Tests

We use Cypress for running frontend-based end-to-end tests. The tests specifications are located at /cypress/integration.

Running frontend end-to-end tests locally

Make sure to build the frontend assets and run tools/bin/mage dev:initStack dev:sqlDump to create a seed database which the tests can reset the database to in between runs. To run the stack when working on end-to-end tests, use the tools/bin/mage dev:startDevStack command. This will run the runs The Things Stack with proper configuration for the end-to-end tests. Note: this command does not output anything, but logs are written to .cache/devStack.log.

Cypress provides two modes for running tests: headless and interactive.

  • Headless mode will not display any browser GUI and output test progress into your terminal instead. This is helpful when one just needs see the results of the tests.
  • Interactive mode will run an Electron based application together with the full-fledged browser. This is helpful when developing frontend applications as it provides hot reload, time travelling, browser extensions and DOM access.

Note: Currently, we test our frontend only in Chromium based browsers.

You can run Cypress in the headless mode by running the following command:

$ tools/bin/mage js:cypressHeadless

You can run Cypress in the interactive mode by running the following command:

$ tools/bin/mage js:cypressInteractive

JavaScript based tests

We find the JS Unit Testing Guide a good starting point for informing our testing guidelines and we recommend reading through this guide. Note, that we employ some different approaches regarding Grammar and Capitalization.

We have extracted and adapted the most important parts below.

Pattern

The goal of naming our tests is to have a concise and streamlined description helping us to understand what a test is testing specifically. In order to do that, we follow a "unit of work - scenario/context - expected behaviour" pattern:

// Schema.
describe('[unit of work]', () => {
  it('[expected behaviour] when [scenario/context]', () => {
    …
  });
});

// Example.
describe('Login', () => {
  it('succeeds when using correct credentials', () => {
    …
  });
});

This pattern will also help you organizing your tests better.

Grammar and Capitalization

Avoid using the modal verb should when describing tests. This will add redundancy and unnecessary verbosity to the test description. Instead, use a simple present tense sentence without any modality and with when as conjunction. Don't use end of sentence periods.

The [unit of work] bit, as part of the outermost describe() function is always capitalized, whereas the [expected behavior] part of the it() function is always lowercase. This way, the suit will generate proper english sentences when concatenating the test descriptions.

// Bad: using `should`.
describe('Login', () => {
  it('should succeed when using correct credentials', () => {
    …
  });
});

// Bad: wrong capitalization.
describe('login', () => {
  it('Succeeds when using correct credentials', () => {
    …
  });
});

// Good: No should and proper capitalization.
describe('Login', () => {
  it('succeeds when using correct credentials', () => {
    …
  });
});
React Components

When testing react components, the name of the component is written as <ReactComponent />.

// Bad: not using JSX syntax.
describe('MyComponent', () => {
  it('matches snapshot', () => {
    …
  });
});

// Bad: describing the component instead of naming it.
describe('My component', () => {
  it('matches snapshot', () => {
    …
  });
});

// Good
describe('<MyComponent />', () => {
  it('matches snapshot', () => {
    …
  });
});
Structurizing tests

We always use the describe() / it() hooks to write all tests, even if there's only one test in the suite. This keeps our tests streamlined and allows for easy extension of the test suite.

// Bad: using `test()` hook.
test('flattens the object', () => {
  …
});

// Good: using `describe() / it()` hooks
describe('Get by path', () => {
  it('succeeds when using correct credentials', () => {
    …
  });
});

It's fine to use multiple hierarchies of describe() to group related tests more accurately:

describe('User registration', () => {
  it('succeeds when using valid inputs', () => {
  });

  describe('when using invalid input values', () => {
    it('shows an error notification', () => {
    });

    it('does not perform a redirect', () => {
    });
  });

  describe('when using an already registered email', () => {
    it('shows an error notification', () => {
    });
  });
});
Test Driven Development (TDD)

Test Driven Development is a development philosophy that puts tests at the core of development. At The Things Industries, we don't enforce this method but we strongly encourage to adopt a process that emphasizes testing. Since adding fontend-based end-to-end tests to our codebase, we plan to do the following:

  1. Writing end-to-end tests for all newly added features
  2. Writing end-to-end tests for each (significant) bug that was resolved
  3. Gradually adding coverage to existing features

Currently, we only employ frontend-based end-to-end tests, meaning that these tests can only be written if they are also operable through the frontend.

Writing End-to-End Tests

It is highly suggested to read Cypress documentation before starting to write tests.

Guiding Principle

We follow the following principle for writing useful end-to-end tests:

The more your tests resemble the way your software is used, the more confidence they can give you.

This means that when writing tests, we always consider the real-life equivalent of the test scenario to design the test setup. This means:

Selecting elements

In line with the principle mentioned above, we have also included Testing Library to use advanced testing utilities. Testing Library has a good guide for how to select elements. We try to follow this guide for our end-to-end tests.

In some cases it can be necessary to select DOM elements using a special selection data attribute. We use data-test-id for this purpose. Use this attribute to select DOM elements when more realistic means of selection are not sufficient. Use meaningful but concise ID values, such as error-notification.

  • Select DOM elements using text captions and labels when possible.

    • Select form fields by its label via cy.findByLabelText, e.g. cy.findByLabelText('User ID'). Same for field errors,warnings and descriptions, use cy.findErrorByLabelText, cy.findWarningByLabelText and cy.findDescriptionByLabelText.
    • Select buttons, links, tabs and other elements that are described by ARIA roles via cy.findByRole, e.g. cy.findByRole('button', {name: 'Submit'}).
    • Select text elements via cy.findByText.

  • Assert that selected elements are visible.

    <!-- Instead of `visibility: hidden` it could be `display:none` or `z-index: -1` as well. -->
<div data-test-id="test" style="visibility: hidden">
  Test content
</div>
    // Bad. This assertions will pass while not being visible to the user.
cy.findByTestId('test').should('exists')

// Good. This assertion will rightfully fail.
cy.findByTestId('test').should('be.visible')
Test runner globals

Cypress uses Mocha as the test runner internally, while for unit tests we use Jest. To keep our tests consistent we prefer using globals from Jest when possible.

Jest globals Mocha globals Used for
describe describe Group together related tests
it it Define a single test
beforeEach/afterEach beforeEach/AfterEach Hook before/after each test (it)
beforeAll/afterAll before/after Hook before/after test block (describe)
End-to-end tests file structure
./pkg/cypress
|-- fixtures                    Cypress mocks
|-- integration                 frontend end-to-end specifications (1)
|   |-- console                 Console related end-to-end tests
|   |   |-- users               tests related to user entity
|   |   |-- ...
|   |   |-- shared              tests that are not directly related to a specific entity (2)
|   |-- oauth                   OAuth related end-to-end tests
|   |   `-- ...
|   `--smoke                    smoke tests (3)
|-- plugins                     Cypress plugins
|-- support                     Cypress commands and test utilities
|-- screenshots                 screenshots generated when running tests (4)
`-- videos                      videos generated when running tests (5)
  1. pkg/cypress/integration contains all test specifications.
  • Each test file must be placed into corresponding folder (console/oauth/smoke).
  • Each test must follow the following naming: {context}.spec.js.
  • One test file must have end-to-end tests dedicated only to a specific entity or view.
  1. pkg/cypress/{console|oauth}/shared contains all test specification not directly related to a single entity or a view. For example, side-navigation.spec.js or header.spec.js must be placed into the cypress/console/shared folder because both components are present on multiple views and are partially related to the stack entities. Make sure to scope cypress selections within the tested component using cy.within.
  2. pkg/cypress/integration/smoke contains tests that simulate a complete user story trying to do almost everything a typical user would do. For example, a typical smoke test can verify that the user is able to register, login, create application and register The Things Uno. For more details and diffeence between regular end-to-end and smoke tests see the End-to-end tests structure section.
  3. and 5. Cypress stores screenshots and videos to the appropriate folder after running end-to-end tests. These should not be added to the repository.
Organizing end-to-end tests

When writing end-to-end tests we comply with the following guidelines:

  • Tests are grouped by views for a specific entity. For example, when testing creation of application API keys:
    1. Add test file cypress/integration/console/applications/api-keys/create.spec.js.
    2. Test the behavior of the API key create view independently from any other specification.
  • Do not repeat actions via the UI that are not related to the current test context. Consider adding reusable Cypress commands that do necessary test setup programmatically. This means that when testing any UI that is not the login specification and requires the user to be logged in, there is no need to log in through the login page, while we simply fetch the access token. Note: this does not mean that one cannot create a cypress command that performs actions via UI.
  • Extract components that appear on various views and test them separately instead of making assertions in each test where this component is used. For example, such components could be the page header and side navigation.
  • Dedicate at least one test to assert that the view displays its UI elements in place on initial load. Assert on UI changes in tests that trigger these changes.
  • Prefer duplicating entities with non-conflicting ids in tests instead of executing database teardown before each test. For example, when testing various scenarios for registering gateway, consider creating gateways with different ID's and EUI's instead of using a single gateway and drop the database before each test. Note: try to use this approach when possible, otherwise do not hesitate to restore database state before each test.
  • Consider various stack configurations when writing end-to-end tests. Some views have different UI depending on availability of different stack components. For example, the end device wizard looks different for deployments with complete cluster (NS+JS+AS) and for JS-only configuration. Likewise, sections and entire views can be enabled or disabled based on our feature toggles. If your test scenario differs based on different feature toggle conditions, make sure to probe these preconditions in your tests.
Smoke tests

We distinguish between regular end-to-end tests and smoke tests. While regular end-to-end tests are scoped to a specific view or component and tests those in depth, smoke tests are testing complete user stories that are critical to the overall integrity of the application and usually comprise multiple components and views, e.g. login flow, user registration or creation of applications. When writing smoke tests we comply with the following guidelines:

  • Smoke tests are testing complete user stories in a wide and shallow manner, meaning:
    • performing some complex and critical flow that touches multiple components, APIs and/or views
    • not testing different configurations or preconditions of the same flow in depth
    • For example, when testing registration of The Things Uno:
      1. Add test file cypress/integration/smoke/devices/create.js
      2. Describe the whole user story to register the device including creating an application (or using an existing one), link the application and create the end device.
  • One smoke test should be encapsulated into a single describeSmokeTest declaration.

Building and Running

There is a single binary for the server, ttn-lw-stack, as well as a binary for the command-line interface ttn-lw-cli. The single binary contains all components start one or multiple components. This allows you to run The Things Stack with one command in simple deployment scenarios, as well as distributing micro-services for more advanced scenarios.

We provide binary releases for all supported platforms, including packages for various package managers at https://github.com/TheThingsNetwork/lorawan-stack/releases. We suggest you use the compiled packages we provide in production scenarios.

Before the binaries are built, the frontend needs to be built. You can control whether to build the frontend for production or development by setting the NODE_ENV environment variable to either development or production.

The difference of a development build includes:

  • Including source maps
  • Using DLL bundle for modules to reduce build time
  • A couple of special build options to improve usage with webpack-dev-server

The frontend can then be built using:

$ tools/bin/mage js:build

For development/testing purposes we suggest to run the binaries directly via go run:

$ go run ./cmd/ttn-lw-stack start

It is also possible to use go build, or release snapshots, as described below.

Releasing

The Things Stack uses GoReleaser for releases. If you want to build a release (snapshot), you first need to install GoReleaser:

$ go install github.com/goreleaser/[email protected]

The command for building a release snapshot is:

$ goreleaser --snapshot -f .goreleaser.snapshot.yml --rm-dist

The command for building a full release is:

$ goreleaser -f .goreleaser.release.yml --rm-dist

Note: Goreleaser is configured to sign binaries, as per GitHub Action in .github/workflows/release-*.yml. If you're doing a release locally, you will need key's passphrase, or need to skip the signing step.

Note: You will at least need to have rpm and snapcraft in your PATH if you want to build a full release.

This will compile binaries for all supported platforms, deb, rpm and Snapcraft packages, release archives in dist, as well as Docker images.

Note: The operating system and architecture represent the name of the directory in dist in which the binaries are placed. For example, the binaries for Darwin x64 (macOS) will be located at dist/darwin_amd64.

A new version is released from the v3.n branch. The necessary steps for each are detailed below.

Note: To get the target version, you can run version=$(tools/bin/mage version:bumpXXX version:current), where xxx is the type of new release (minor/patch/RC). Check the section Version Bump for more information.

Release From Master

Create a Release issue in this repository and follow the steps.

Release Backports

Create a Backport Release issue in this repository and follow the steps.

Troubleshooting

Console

Problem: Assets are not found

The Console will render a blank page and you can see backend logs like e.g.:

INFO Request handled                          duration=40.596µs error=error:pkg/errors/web:unknown (Not Found) message=Not Found method=GET namespace=web remote_addr=[::1]:50450 request_id=01DZ2CJDWKAFS10QD1NKZ1D56H status=404 url=/assets/console.36fcac90fa2408a19e4b.js

You might also see error messages in the Console such as:

Uncaught ReferenceError: libs_472226f4872c9448fc26 is not defined
    at eval (eval at dll-reference libs_472226f4872c9448fc26 (console.js:26130), <anonymous>:1:18)
    at Object.dll-reference libs_472226f4872c9448fc26 (console.js:26130)
    at …

Possible causes

Using incorrect or no configs

If you plan to run the Console / Account App in development mode, it is important to ensure that the right configuration is loaded both for running The Things Stack itself, as well as the development tooling (e.g. tools/bin/mage serve).

Possible solution

Make sure that you source the environment variables as described above in all terminal sessions that run The Things Stack or the tools/bin/mage commands.

Missing restart

The stack has not been restarted after the Console bundle has changed. In production mode, The Things Stack will access the bundle via a filename that contains a content-hash, which is set during the build process of the Console. The hash cannot be updated during runtime and will take effect only after a restart.

Possible solution
  1. Restart the The Things Stack
Accidentally deleted bundle files

The bundle files have been deleted. This might happen e.g. when a mage target encountered an error and quit before running through.

Possible solution
  1. Rebuild the Console tools/bin/mage js:clean js:build
  2. Restart The Things Stack
Mixing up production and development builds

If you switch between production and development builds of the Console, you might forget to re-run the build process and to restart The Things Stack. Likewise, you might have arbitrary config options set that are specific to a respective build type.

Possible solution
  1. Double check whether you have set the correct environment: echo $NODE_ENV, it should be either production or development
  2. Double check whether your The Things Stack config is set correctly (especially TTN_LW_CONSOLE_UI_JS_FILE, TTN_LW_CONSOLE_UI_CANONICAL_URL and similar settings). Run ttn-lw-stack config --env to see all environment variables
  3. Make sure to rebuild the Console tools/bin/mage js:clean js:build
  4. Restart The Things Stack

Problem: Console rendering blank page and showing arbitrary error message in console logs, e.g.:

console.4e67a17c1ce5a74f3f50.js:104 Uncaught TypeError: m.subscribe is not a function
    at Object../pkg/webui/console/api/index.js (console.4e67a17c1ce5a74f3f50.js:104)
    at o (console.4e67a17c1ce5a74f3f50.js:1)
    at Object../pkg/webui/console/store/middleware/logics/index.js (console.4e67a17c1ce5a74f3f50.js:104)
    at o (console.4e67a17c1ce5a74f3f50.js:1)
    at Object.<anonymous> (console.4e67a17c1ce5a74f3f50.js:104)
    at Object../pkg/webui/console/store/index.js (console.4e67a17c1ce5a74f3f50.js:104)
    at o (console.4e67a17c1ce5a74f3f50.js:1)
    at Module../pkg/webui/console.js (console.4e67a17c1ce5a74f3f50.js:104)
    at o (console.4e67a17c1ce5a74f3f50.js:1)
    at Object.0 (console.4e67a17c1ce5a74f3f50.js:104)

Possible causes

Bundle using old JS SDK

The bundle integrates an old version of the JS SDK. This is likely a caching/linking issue of the JS SDK dependency.

Possible solutions
  • Re-establish a proper module link between the Console and the JS SDK
    • Run tools/bin/mage js:cleanDeps js:deps
    • Check whether the ttn-lw symlink exists inside node_modules and whether it points to the right destination: lorawan-stack/sdk/js/dist
      • If you have cloned multiple lorawan-stack forks in different locations, yarn link might associate the JS SDK module with the SDK on another ttn repository
    • Rebuild the Console and (only after the build has finished) restart The Things Stack

Problem: Console rendering blank page and showing Module not found message in console logs, e.g.:

ERROR in ./node_modules/redux-logic/node_modules/rxjs/operators/index.js Module not found: Error: Can't resolve '../internal/operators/audit' in '/lorawan-stack/node_modules/redux-logic/node_modules/rxjs/operators'
Possible cause: Broken yarn or npm cache
Possible solution: Clean package manager caches
  • Clean yarn cache: yarn cache clean
  • Clean npm cache: npm cache clean
  • Clean and reinstall dependencies: tools/bin/mage js:cleanDeps js:deps

Problem: The build crashes without showing any helpful error message

Cause: Not running mage in verbose mode

tools/bin/mage runs in silent mode by default. In verbose mode, you might get more helpful error messages

Solution

Run mage in verbose mode: tools/bin/mage -v {target}

Problem: Browser displays error:

Cannot GET /

Cause: No endpoint is exposed at root
Solution:

Console is typically exposed at http://localhost:8080/console, API at http://localhost:8080/console, OAuth at http://localhost:8080/oauth, etc

Problem: Browser displays error:

Error occurred while trying to proxy to: localhost:8080/console

Cause: Stack is not available or not running
Solution:

For development, remember to run the stack with go run:

$ go run ./cmd/ttn-lw-stack start

General advice

A lot of problems during build stem from fragmented, incomplete runs of mage targets (due to arbitrary errors happening during a run). Oftentimes, it then helps to build the entire Web UI from scratch: tools/bin/mage jsSDK:cleanDeps jsSDK:clean js:cleanDeps js:clean js:build, and (re-)start The Things Stack after running this.