support of Philips Hue lights is very important !!!!!!!

[ghost]

No description provided.

[bigfreak85]

For Example see: http://blog.krannich.de/2014/11/ambilight-mit-boblight-und-philips-hue-bridge/

[Newan]

Cannot start python output:
[device]
name hue
output python /usr/dreamWifiLight/dkhue.py
channels 6
type popen
interval 200000
debug off

log:
EnigmaLight (c) 2014 Speedy1985 and Oktay Oeztueter.
(Based on Boblight (c) 2009 by Bob Loosen)

[InitLog] start of log /home/elight-addons/.enigmalight/enigmalight.log
[CConfig::LoadConfigFromFile] Opening /etc/enigmalight.conf
[CConfig::CheckConfig] checking config lines
[CConfig::CheckConfig] config lines valid
[CConfig::LoadConfigFromFile] Opening /etc/enigmalight.conf
[CConfig::BuildConfig] building config
[CConfig::BuildConfig] built config successfully
[main] Start device 1 from 2
[main] Start device 2 from 2
"CDevice::Process] hue: starting with output "python /usr/dreamWifiLight/dkhue.py
[CDevice::Process] hue: setting up
[CDevice::Process] ambilight: starting with output "/dev/ttyUSB0"
[CDevice::Process] ambilight: setting up
[CDevice::Process] hue: setup succeeded
[CDevice::Process] ambilight: setup succeeded
[CEnigmaLight::SetColorSequence]Set colorsequence to RGB
set adjust 0 0 0
1[CFlagManager::SetVideoGamma] Gamma not set, using 2.2 since this is default for video
[CMainLoop::Process] Starting grabber..
[CGrabber::Setup] Lights: 107, Cluster leds: 1 as one led
[CGrabber::Setup] Channels: 321
[CGuiServer::Process] Start GuiServer
[CGuiServer::Process] Opening listening socket for Enigma2 GUI on 127.0.0.1:6767
[CGrabber::Setup] Interval: 0.10
[CGrabber::Run] Mode -> Dynamic
[CStb::DetectSTB] Detect STB-Type...
[CStb::DetectSTB] Detected STB-Type: BCM7405
[CFrameGrabber::Setup] Open memory /dev/mem
[CFrameGrabber::CheckRes] Set Scanrange to 90x67 (Source 1440x1080)
[CGuiServer::Process] GuiClient 127.0.0.1:47753 connected successful.
': [Errno 2] No such file or directoryiLight/dkhue.py
root@dm800se:~# python /usr/dreamWifiLight/dkhue.py
^CTraceback (most recent call last):
File "/usr/dreamWifiLight/dkhue.py", line 159, in
popen()
File "/usr/dreamWifiLight/dkhue.py", line 17, in popen
eingabe = sys.stdin.readline()