Camera Not Enabled Error with Pi5-IMX219

[guilherme-salome]

Hi everyone, not sure if this is the right place to ask for help, if it isn't please let me know.

I am a noob on raspberry pi and bitcoin in general, but trying to learn. I set up a raspberry pi zero following seedsigner's manifesto, but made a mistake when purchasing the camera. The one I have is a Pi5-IMX219 from Waveshare (https://www.waveshare.com/wiki/Pi5-IMX219).

Problem: When trying to test the camera, I get a System Error with the message

PiCameraError
camera.py, 459, in _init_camera Camera is not enabled.
Try running `sudo raspi-config`...

Does anyone have experience with these problems and can point me in the right direction?

Thank you!

[krizzi24]

I have the same problem. Is there a possibility to run a terminal on seedsigner-os?

[jdlcdl]

Leaving a pointer to the seedsigner-os repo where I've added a similar issue.

When looking at that repo, can try something like: https://github.com/search?q=repo%3ASeedSigner%2Fseedsigner-os++imx219&type=code to get a hint of which config file changes might be necessary.

Issue in seedsigner os is: SeedSigner/seedsigner-os#80

[ghamy016]

dealing with same problem, any solution advised?

[SeedSigner]

This error was thrown b/c the OP used a camera that is not currently supported by our software, the solution is to acquire a standard RPi camera, there are links to a few known good ones at the bottom of the page at https://seedsigner.com/hardware

[ghamy016]

dealing with same problem, any solution advised?

i had no daughterboard pi zero camera , just was not inserting it the right way, which is, insert into the pi board slot from bottom not above, so problem solved!