ESP32-C3 Wifi Not Starting?

[riweston]

Hi,

Apologies if this is a noobie question but I can't seem to get the wifi to start on an ESP32-C3 device using the suggested configuration in the repo, I've tried a couple but neither are connecting to wifi as a client or falling back to AP mode, any thoughts?

---
substitutions:
  name: "aiosense-kitchen"  # lowercase only, have to be unique
  friendly_name: "aiosense kitchen"  # device name and entity prefix
  version: "2.0.0"  # your AIOsense version

  # bh1750_update_interval: 5s

  # bmex80_offset_humidity: "0"
  # bmex80_offset_temperature: "0"
  # bmex80_update_interval: 30s

  # bme680_bsec_sample_rate: lp # lp -> 3s, ulp ->5min
  # bme680_bsec_temperature_offset: "0"

  # ld2410_max_distance_move: 4.5m
  # ld2410_max_distance_still: 4.5m
  # ld2410_timeout: 5s

  # pir_delayed_off: 1s
  # pir_delayed_on: 0s

packages:
  remote_package:
    url: https://github.com/schluggi/AIOsense
    ref: main
    refresh: 1d
    files:
      - esphome/packages/config/base.yaml

      # --- select your board ---
      - esphome/packages/config/esp32-c3-mini.yaml
      # - esphome/packages/config/esp32-d1-mini.yaml
      # - esphome/packages/config/esp32-s2-mini.yaml
      # - esphome/packages/config/esp8266-d1-mini.yaml

      # --- select your sensors ---
      # - esphome/packages/sensors/bh1750.yaml
      # - esphome/packages/sensors/buzzer.yaml  # AIOsense >= 2.1.x only
      # - esphome/packages/sensors/bme280.yaml  # enable for bme280
      # - esphome/packages/sensors/bme680.yaml  # disable for bme280
      # - esphome/packages/sensors/bme680_bsec.yaml  # does not work yet
      - esphome/packages/sensors/occupancy.yaml  # only if pir & mmWave are on
      - esphome/packages/sensors/pir.yaml
      - esphome/packages/sensors/rgb_led.yaml  # esp32-c3-mini only
      # - esphome/packages/sensors/led.yaml  # d1-mini only

      # --- select your radar sensor ---
      # - esphome/packages/sensors/ld2410.yaml
      - esphome/packages/sensors/sen0395.yaml


# Enable Home Assistant API
api:
#  encryption:
#    key: "<secret>"

ota:

wifi:
  ssid: !secret wifi_iot_ssid
  password: !secret wifi_iot_password
  ap:
    ssid: aiosense-kitchen
  # manual_ip:
  #   static_ip: 192.168.1.111
  #   subnet: 255.255.255.0
  #   gateway: 192.168.1.1

# bluetooth_proxy:

[riweston]

Urgh, ignore me I just realised the issue...hidden SSID and I needed fast_connect to be enabled 🤦

[Schluggi]

You're welcome :)