How to program the OBCs Flash

A. With MCUXpresso IDE

Connect a LPC-Link2 probe to the JTAG pins of the OBC Y- connector
install and run a MCUXpresso developer IDE
make an enpty C project - choose LPC1769 as target CPU. Do not choose any boards
start the GUI Flash Tool from the MCUXpresso toolbar

select the axf file you want to program into your OBC

run the tool and check if program was successful.

B. With provided Windows BAT file

Download a release and copy the provided FlashOBC.bat file (together with the ClimbOBCR_x_x_x.axf) file into any local directory.
Check if your local MCUXpresso instalation is used by reviewing/adapting the first line of this BAT file
Open A CMD window with evelated user rights!
Call FlashOBC.BAT with the correct axf file name as parameter
If everythink goes ok, your terminal should somewhere contain the lines: "Loading 'ClimbObcR_0_8_2.axf' ELF 0x00000000 len 0x878C" and "Loaded 0x878C bytes in 181ms (about 191kB/s)"