Can't connect BH1750, help!

[ooomakon]

home does not connect to the program
{
"c": { "l": 13 },
"a": [{
"t": 50,
"n": 2,
"dt":[5,4,35],
"f": 14357564.33,
"po": 1.396066767,
"re": 8550
}]
}

[ooomakon]

With such parameters, it is also not detected, for pairing with Homekit
{"c":{"o":0,"l":13},"a":[{"t":50,"n":2,"dt":[5,4,35]}]}

[homelink21]

I have the same problem with this configuration, BH1750 sensor connected to the Wemos in the following scheme (VCC -> 3.3v - SCL -> D1 [GPIO5] - SDA -> D2 [GPIO4] - GND -> G) and the following json: { "c": {"l": 14, "ct": 10, "ic": [5,4,400], "n": "ESP32_PRL", "sn": "PIR32L"}, "a": [{ "t": 50, "n": 2, "dt": [4,92]}, {"t": 12, "i": 10, "f1": [{"g": 0}]}]} .
In addition I have configured the i2c bus "ic" in the general configuration.

[ooomakon]

Works!
{"c":{"ic":[[5,4,400]]},"a":[{"t":50,"n":2,"dt":[0,35]}]}

[Andreadf67]

on my shelly1 dont work.
{"c":{"ic":[[3,1,400]]},"a":[{"t":50,"n":2,"dt":[0,35]}]}

I use (VCC -> 3.3v - SCL -> D1 [GPIO3] - SDA -> D2 [GPIO1] - GND -> G)
Why do you use 400 in "ic" value ?

[Andreadf67]

Great, I tried again and it works.
thank you so much

[ooomakon]

Tried all json options, it is not added to the house