Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Add: Impedance testing on board #39

Open
andrewjaykeller opened this issue Oct 1, 2016 · 6 comments
Open

Add: Impedance testing on board #39

andrewjaykeller opened this issue Oct 1, 2016 · 6 comments

Comments

@andrewjaykeller
Copy link

Be able to compute impedance on the board and just send the values to the computer to drastically reduce the time it takes to measure impedances.

@jpdandrade
Copy link

jpdandrade commented Nov 14, 2016

It would be nice to "automatically"/easily setup the impedance signal from the firmware code. We could define the frequency we wanted for the impedance signal and it would be always on. Even better it would be sending the impedance measurement in the data packet, if possible.
Below, there is a link for the code I tried to automatically set the impedance signal for one channel.
For that, I added, on the setup() method, the line "board.streamSafeLeadOffSetForChannel(0x01,OFF,ON);". Below (commented), another option of code for impedance checking in the 8 channels. but none of the options did what I wanted.

link: https://github.com/jpdandrade/OpenBCI_FirmwareV2/blob/master/DefaultBoard/DefaultBoard.ino

Thanks for the help.

@andrewjaykeller
Copy link
Author

@jpdandrade thanks for the code upload.

I notice you do not make a call to start streaming. Are you doing that from the driver?

@jpdandrade
Copy link

@aj-ptw yeah my goal was not to code the "start streaming", although it would be interesting to know how to do it as well.
I just wanted to set the impedance measurement signal to be always "active" and not only when I command it through the GUI. This way I would able to measure the power spectrum in the specific frequency bin to measure impedance.

@andrewjaykeller
Copy link
Author

And you are not seeing the impedance signal at all? Could you post a screen shot of the signal vs. the other signals. This should work as you described of always being on.

@jpdandrade
Copy link

This was what made me think I wasn't doing it right in the code. I don't know if it's asking too much, but it would be great if you could try it and see how to make it work.
Thanks!

@jpdandrade
Copy link

Just putting more wood in the fire:

  1. Not connecting wires to board. Only channel 1 on:
    https://cloud.githubusercontent.com/assets/5629079/20839717/8cec60d0-b8a5-11e6-81bb-62c15133f0d5.png
    (I can see peak at 50Hz and 62.5Hz, as disired)

  2. Connecting only gray wire to board. Only channel 1 on:
    https://cloud.githubusercontent.com/assets/5629079/20839833/f6899364-b8a5-11e6-9b1b-1e06b176be6e.png
    (very noisy. peak at 62.5Hz disapears)

  3. Connecting gray, white and black wires to board (they are not touching each other). Only channel 1 on:
    https://cloud.githubusercontent.com/assets/5629079/20839930/5f183cdc-b8a6-11e6-9d41-977067a3a0a0.png
    (can't see 62.5Hz peak)

  4. Connecting gray, white and black wires to each other. Only channel 1 on:
    https://cloud.githubusercontent.com/assets/5629079/20840009/afb1014c-b8a6-11e6-8933-660e569afd53.png
    (all noise disapears)

  5. Connecting gray, white and black wires to each other. All channels on:
    https://cloud.githubusercontent.com/assets/5629079/20840080/e5336292-b8a6-11e6-872e-e27a89600084.png
    (can see 50 Hzpeak)

It seems that the code on board actually makes us have the Fs/4Hz peak (case 1.), but why does the signal behaves like I show in the other cases? This looks strange to me...
Sorry for long post but I'm trying to be clear

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
Development

No branches or pull requests

2 participants