Skip to content

Latest commit

 

History

History
173 lines (119 loc) · 5.61 KB

README.md

File metadata and controls

173 lines (119 loc) · 5.61 KB
Raw

Automated AIQUM deployment, adding an ONTAP cluster to AIQUM, and claiming AIQUM into Cisco Intersight using Ansible

Note: Fully automated installation of AIQUM requires a minimum version of AIQUM 9.10

This repository contains Ansible roles and playbooks for end-to-end AIQUM deployment, adding ONTAP cluster to AIQUM, and claiming AIQUM into Cisco Intersight

The deployment automation is based on the following roles:

aiqumsetup
intersightclaim

Environment Validated

ONTAP 9.12.1 and later
AIQUM 9.12 and 9.13
ESXi and vCenter 7.0 and 8.0
UCSM 4.1.2+
CentOS 8
Ubuntu 20.04

Prerequisites

  1. It is assumed that the physical rack and stack and power-on, initialization of ONTAP OS, setup of node management IPs and initial ONTAP cluster with IP is completed.
  2. It is assumed a Cisco Intersight account is setup and configured to allow devices to be added to the account. See below section for how to obtain a Cisco Intersight key and code.
  3. It is assumed the Intersight Assist virtual appliance is installed and claimed to your Intersight account
  4. It is assumed vCenter is in working order to deploy an OVA.
  5. The user should have an Ansible Control sever that has network reachability to the ONTAP cluster and internet access to pull this repository from GitHub. Refer to https://docs.ansible.com/ansible/latest/installation_guide/intro_installation.html for guidance on setting up and Ansible Control server.
  6. The Ansible control server should have the following collections, libraries and modules installed:
ansible-galaxy collection install cisco.intersight

ansible-galaxy collection install community.vmware

ansible-galaxy collection install netapp.ontap
  1. Create a .sh file to install any additional libraries and modules or run the commands individually.
vi setup.sh

Notes:
Change /etc/ansible to the directory your AIQUM playbook will be kept
Change username.usergroup to the user and group that will be setting up the ansible playbook

8a. Paste the below content into the file ( For CentOS 8 )

#!/bin/bash
echo "Installing Python ------>"
sudo yum -y install python3 >/dev/null

echo "Installing Python Pip ------>"
sudo yum -y install python3-pip >/dev/null

echo "Installing git ------>"
sudo yum -y install git >/dev/null

echo "Installing PyVmomi ------>"
pip3 install --user  PyVmomi

echo "Installing pexpect ------>"
pip3 install --user pexpect

echo "Installing jmespath ------>"
pip3 install --user jmespath

echo "change owner and group of /etc/ansible ------>"
sudo chown -R username.usergroup /etc/ansible/

8b. Paste the below content into the file ( For Ubuntu 20.04 )

#!/bin/bash
echo "Installing Python3-pip ------>"
sudo apt-get -y install python3-pip  >/dev/null

echo "Installing PyVmomi ------>"
pip3 install --user  PyVmomi

echo "Installing pexpect ------>"
pip3 install --user pexpect

echo "Installing jmespath ------>"
pip3 install --user jmespath

echo "echo Changing owner and group of /etc/ansible ------>"
sudo chown -R username.usergroup /etc/ansible/
  1. Make the file executable.
chmod +x setup.sh
  1. Run the script.
./setup.sh

Getting Started

  1. From the Ansible control server change directory to /etc/ansible and download a ZIP version of this repository or clone it using the below command.
git clone https://github.com/NetApp/Active-IQ-Unified-Manager.git
  1. There is one variable file under the vars folder 'aiqum_main.yml ' that needs to be filled out with environment specific parameters prior to executing the playbook.

NOTE: The format of the variable file needs to be maintained as it is, any changes to the structure of the file may lead to failure in execution of the playbook.

NOTE: Sample values are pre-populated against some variables in order to provide the user additional clarity on how the variable needs to be filled out. Please replace the sample values with your environment specific information

  1. Update the credentials for the ONTAP cluster, the AIQUM VM, Cisco Intersight and the vCenter. Appropriate files are located under group_vars folder. Sample:
# Credentials for connecting to the ONTAP Cluster
ontap_cluster_username: admin
ontap_cluster_password: password

# Management IP Addresses of the ONTAP cluster
ontap_cluster_address: 192.168.10.10
  1. Executing the Playbook

A playbook by name 'aiqum.yml' is available at the root of this repository. It calls all the required roles to complete the installation of AIQUM, adding a cluster to AIQUM and claiming AIQUM into Cisco Intersight. Execute the playbook from the Ansible Control server using the following command:

NOTE: Add -vvv to the below command to get highest verbose output to assist in troubleshooting.

ansible-playbook aiqum.yml

If you would like to run a part of the deployment, you may use the appropriate tag that accompanies each task in the role and run the playbook in the below fashion.

To install AIQUM and add an ONTAP cluster use -t aiqum_setup

ansible-playbook aiqum.yml -t aiqum_setup

To claim an existing AIQUM instance into Cisco Intersight use -t intersight_claim

ansible-playbook aiqum.yml -t intersight_claim

How to obtain Cisco Intersight Key and Code

Log into Cisco Intersight.
Click on Gear then Settings.
Click on API Keys.
Click on Generate API KEY.
Enter a Description.
Click Generate.
Copy API Key ID and use as value for “api_key_id” in group_vars/intersight file.
Copy Secret Key and paste into a text file and use as path for “cisco_key” in group_vars/intersight file. \

Author Information