bash <(curl -L https://github.com/ohyeah521/Surveillance-Station/raw/main/9.2.0_11289/SurveillanceStation-x86_64/install_license)

[MKatsay]

          bash <(curl -L https://github.com/ohyeah521/Surveillance-Station/raw/main/9.2.0_11289/SurveillanceStation-x86_64/install_license)

Originally posted by @ohyeah521 in #21 (comment)

Activation takes place - the number of licenses is 56. but after 1 hour the process stops, and you need to stop the application and run it. reinstalling does not help.

[ohyeah521]

i had test it for 5 hours ,no crash. please upload you crash log.

log path:
/var/log/surveillance

[MKatsay]

ssdevice.log
surveillance.log

[MKatsay]

more logs from another server
ssdevice.log
ssnotification.log

[MKatsay]

at the same time, if you open the application, just a gray background. it does not load further on the desktop.

[MKatsay]

yesterday I stopped the application process after the application broke down at about 16:05 and then did the launch, and at 17 the application broke again

[MKatsay]

ssdevice.log
ssnotification.log
surveillance.log

[MKatsay]

these are logs from 3 different servers

[MKatsay]

[MKatsay]

All this was on Xpenology and the same situation is happening with the original one.

[MKatsay]

ssdevice.log
ssnotification.log
surveillance.log

[ohyeah521]

What is your Synology model?

[MKatsay]

XPEnology - DS1819+
XPEnology - RS4021xs+
XPEnology -RS4021xs+
XPEnology - SA3610

Synology - RS4021xs+

It does not matter how the application was installed "through the package center or manually installed". after activating the license, this happens everywhere. I tried updating from the previous version, deleted it completely and installed it again...

[TLHD]

Exactly the same Problem here.
Xpenology - SA6400

[ohyeah521]

1、uninstall
2、set host. https://github.com/ohyeah521/Surveillance-Station/edit/main/README.md
3、reinstall

[MKatsay]

Thank you, I did it, I will test it, I will write according to the result

[ohyeah521]

write here: https://github.com/ohyeah521/Surveillance-Station/issues

[koira]

I can confirm patch for DSM 9.2.0_11289 is running well on my DS1522+ since 3 days. Make sure to edit Synology's /etc/hosts-file accordingly before installation. Heaps of thanks to @MKatsay 🙏

[AmmokPT]

@koira are you sure is not rebooting after 1h ? Are you using Xpenology ? Because I'm using the DS920+

[koira]

Yes, I am sure. It is not rebooting after one hour and the licenses remain in place. Installed on an original Synology DS1522+.

…

Am 23.07.2024 um 04:07 schrieb AmmokPT ***@***.***>: @koira <https://github.com/koira> are you sure is not rebooting after 1h ? Are you using Xpenology ? — Reply to this email directly, view it on GitHub <#22 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AATZFGYOMR5CTPQ7KSQPLLDZNVX7RAVCNFSM6AAAAABLCYQ4KCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENBTHAYTKOBVG4>. You are receiving this because you were mentioned.

[AmmokPT]

@koira so did you edited the hosts file ? Do you know how to do it, I don't know how..

[koira]

You have to edit the host-file, otherwise it will reboot after one hour and loose the licenses... You can either edit the hosts-file with vi or nano from the SSH-terminal or you can log into shell via ssh and execute the line that is described here under "block license check": https://github.com/ohyeah521/Surveillance-Station Hope this helps.

…

Am 24.07.2024 um 02:09 schrieb AmmokPT ***@***.***>: @koira <https://github.com/koira> so did you edited the hosts file ? Do you know how to do it, I don't know how.. — Reply to this email directly, view it on GitHub <#22 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AATZFG3WC6RCBAMZVUZWGM3ZN2S6TAVCNFSM6AAAAABLCYQ4KCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENBWGA3TKMJXGQ>. You are receiving this because you were mentioned.

[javifly]

echo "0.0.0.0 synosurveillance.synology.com" | sudo tee -a /etc/hosts

doubt, this command could be executed from a script of the scheduled tasks tool in the same way as the other command is executed?

I don't know if running it in the same script or in a separate one... is it possible?

[Aqua405]

Tell me, did I enter the command correctly?

[Alikerks]

Tell me, did I enter the command correctly?

Hi, made everything same as recommended but still crashing every hour. I configured a scheduled task to reapply patch every hour.

Update : The scheduled task is not working, reverted back to 9.1.2

[MKatsay]

Hi, I tested it again, now the result is the following: every hour the service just stops and starts again. Unfortunately, this is not convenient for monitoring. but in general, the license works and helps. But for those who are critical, continuous recording or recording is very important - they will lose 10 seconds every hour.

[MKatsay]

your repository has been deleted, you can share the archive with instructions on how to get licenses, you can directly by email [email protected]

[mrli868]

I have blocked the synosurveillance.synology.com in host, but Surbeillance Station still still stop and start every hour. any one solved it?

[Alikerks]

Am I the only one who doesn't stop? It works fine for me without stopping Could it be because of the firewall settings?

Could you please provide more information about your firewall settings ? Did you block domain synosurveillance.synology.com in the DSM firewall ?

[ohyeah521]

try new version: https://github.com/ohyeah521/Surveillance-Station

[ohyeah521]

After a long period of testing, I have completely removed the time bomb.

[Alikerks]

I'm using it since a week now and still on. I can tell that time bomb is no more active.