From 814b4f975dbd3e411a636a5fd1b45bc08d899960 Mon Sep 17 00:00:00 2001 From: "Carles S. Soriano Perez" Date: Fri, 30 Aug 2024 10:48:32 +0200 Subject: [PATCH] docs: Updated installation steps to refer to `miniforge` and `micromamba` --- docs/installation/installation.rst | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/docs/installation/installation.rst b/docs/installation/installation.rst index 1ba747275..e7c340cc3 100644 --- a/docs/installation/installation.rst +++ b/docs/installation/installation.rst @@ -5,11 +5,13 @@ Installation RA2CE can be operated via the command-line interface with two commands. Before RA2CE can be used, the correct Python environment needs to be installed -(see *environment.yml*). Anaconda is a well-known environment manager for Python -and can be used to install the correct environment and run RA2CE via its -command-line interface. It is recommended to install Anaconda, instead of -`miniconda`, so that you have all required packages already available during the -following steps. +(see *environment.yml*), this can be done with a conda environment manager such +as `miniforge `_ or `micromamba `_. + +.. note:: + Important! In compliance with Deltares open-source policy it is recommended to use either ``miniforge`` or ``micromamba`` + as they both have ``conda-forge`` as the default package channel. If you wish to use another conda distribution please + make sure the default channel is set to ``conda-forge`` to avoid issues with Deltares open-source policy. CLI only