Skip to content

Latest commit

 

History

History
697 lines (514 loc) · 36.5 KB

manage-ticdc.md

File metadata and controls

697 lines (514 loc) · 36.5 KB
Raw
title summary aliases
Manage TiCDC Cluster and Replication Tasks
Learn how to manage a TiCDC cluster and replication tasks.
/docs/dev/ticdc/manage-ticdc/
/docs/dev/reference/tools/ticdc/manage/

Manage TiCDC Cluster and Replication Tasks

This document describes how to upgrade TiCDC cluster and modify the configuration of TiCDC cluster using TiUP, and how to manage the TiCDC cluster and replication tasks using the command-line tool cdc cli.

You can also use the HTTP interface (the TiCDC OpenAPI feature) to manage the TiCDC cluster and replication tasks. For details, see TiCDC OpenAPI.

Upgrade TiCDC using TiUP

This section introduces how to upgrade the TiCDC cluster using TiUP. In the following example, assume that you need to upgrade TiCDC and the entire TiDB cluster to v5.3.0.

{{< copyable "shell-regular" >}}

tiup update --self && \
tiup update --all && \
tiup cluster upgrade <cluster-name> v5.3.0

Notes for upgrade

Modify TiCDC configuration using TiUP

This section introduces how to modify the configuration of TiCDC cluster using the tiup cluster edit-config command of TiUP. The following example changes the value of gc-ttl from the default 86400 to 3600, namely, one hour.

First, execute the following command. You need to replace <cluster-name> with your actual cluster name.

{{< copyable "shell-regular" >}}

tiup cluster edit-config <cluster-name>

Then, enter the vi editor page and modify the cdc configuraion under server-configs. The configuration is shown below:

 server_configs:
  tidb: {}
  tikv: {}
  pd: {}
  tiflash: {}
  tiflash-learner: {}
  pump: {}
  drainer: {}
  cdc:
    gc-ttl: 3600

After the modification, execute the tiup cluster reload -R cdc command to reload the configuration.

Use TLS

For details about using encrypted data transmission (TLS), see Enable TLS Between TiDB Components.

Use cdc cli to manage cluster status and data replication task

This section introduces how to use cdc cli to manage a TiCDC cluster and data replication tasks. cdc cli is the cli sub-command executed using the cdc binary. The following interface description assumes that:

  • cli commands are executed directly using the cdc binary;
  • PD listens on 10.0.10.25 and the port is 2379.

Note:

The IP address and port that PD listens on correspond to the advertise-client-urls parameter specified during the pd-server startup. Multiple pd-servers have multiple advertise-client-urls parameters and you can specify one or multiple parameters. For example, --pd=http://10.0.10.25:2379 or --pd=http://10.0.10.25:2379,http://10.0.10.26:2379,http://10.0.10.27:2379.

If you deploy TiCDC using TiUP, replace cdc cli in the following commands with tiup ctl cdc.

Manage TiCDC service progress (capture)

  • Query the capture list:

    {{< copyable "shell-regular" >}}

    cdc cli capture list --pd=http://10.0.10.25:2379
    [
  {
    "id": "806e3a1b-0e31-477f-9dd6-f3f2c570abdd",
    "is-owner": true,
    "address": "127.0.0.1:8300"
  },
  {
    "id": "ea2a4203-56fe-43a6-b442-7b295f458ebc",
    "is-owner": false,
    "address": "127.0.0.1:8301"
  }
]
    • id: The ID of the service process.
    • is-owner: Indicates whether the service process is the owner node.
    • address: The address via which the service process provides interface to the outside.

Manage replication tasks (changefeed)

State transfer of replication tasks

The state of a replication task represents the running status of the replication task. During the running of TiCDC, replication tasks might fail with errors, be manually paused, resumed, or reach the specified TargetTs. These behaviors can lead to the change of the replication task state. This section describes the states of TiCDC replication tasks and the transfer relationships between states.

TiCDC state transfer

The states in the above state transfer diagram are described as follows:

  • Normal: The replication task runs normally and the checkpoint-ts proceeds normally.
  • Stopped: The replication task is stopped, because the user manually pauses the changefeed. The changefeed in this state blocks GC operations.
  • Error: The replication task returns an error. The replication cannot continue due to some recoverable errors. The changefeed in this state keeps trying to resume until the state transfers to Normal. The changefeed in this state blocks GC operations.
  • Finished: The replication task is finished and has reached the preset TargetTs. The changefeed in this state does not block GC operations.
  • Failed: The replication task fails. Due to some unrecoverable errors, the replication task cannot resume and cannot be recovered. The changefeed in this state does not block GC operations.

The numbers in the above state transfer diagram are described as follows.

  • ① Execute the changefeed pause command
  • ② Execute the changefeed resume command to resume the replication task
  • ③ Recoverable errors occur during the changefeed operation, and the operation is resumed automatically.
  • ④ Execute the changefeed resume command to resume the replication task
  • ⑤ Recoverable errors occur during the changefeed operation
  • ⑥ changefeed has reached the preset TargetTs, and the replication is automatically stopped.
  • ⑦ changefeed suspended longer than the duration specified by gc-ttl, and cannot be resumed.
  • ⑧ changefeed experienced an unrecoverable error when trying to execute automatic recovery.

Create a replication task

Execute the following commands to create a replication task:

{{< copyable "shell-regular" >}}

cdc cli changefeed create --pd=http://10.0.10.25:2379 --sink-uri="mysql://root:[email protected]:3306/" --changefeed-id="simple-replication-task" --sort-engine="unified"
Create changefeed successfully!
ID: simple-replication-task
Info: {"sink-uri":"mysql://root:[email protected]:3306/","opts":{},"create-time":"2020-03-12T22:04:08.103600025+08:00","start-ts":415241823337054209,"target-ts":0,"admin-job-type":0,"sort-engine":"unified","sort-dir":".","config":{"case-sensitive":true,"filter":{"rules":["*.*"],"ignore-txn-start-ts":null,"ddl-allow-list":null},"mounter":{"worker-num":16},"sink":{"dispatchers":null,"protocol":"default"},"scheduler":{"type":"table-number","polling-time":-1}},"state":"normal","history":null,"error":null}

  • --changefeed-id: The ID of the replication task. The format must match the ^[a-zA-Z0-9]+(\-[a-zA-Z0-9]+)*$ regular expression. If this ID is not specified, TiCDC automatically generates a UUID (the version 4 format) as the ID.

  • --sink-uri: The downstream address of the replication task. Configure --sink-uri according to the following format. Currently, the scheme supports mysql/tidb/kafka/pulsar/s3/local.

    {{< copyable "" >}}

    [scheme]://[userinfo@][host]:[port][/path]?[query_parameters]

    When a URI contains special characters, you need to process these special characters using URL encoding.

  • --start-ts: Specifies the starting TSO of the changefeed. From this TSO, the TiCDC cluster starts pulling data. The default value is the current time.

  • --target-ts: Specifies the ending TSO of the changefeed. To this TSO, the TiCDC cluster stops pulling data. The default value is empty, which means that TiCDC does not automatically stop pulling data.

  • --sort-engine: Specifies the sorting engine for the changefeed. Because TiDB and TiKV adopt distributed architectures, TiCDC must sort the data changes before writing them to the sink. This option supports unified (by default)/memory/file.

    • unified: When unified is used, TiCDC prefers data sorting in memory. If the memory is insufficient, TiCDC automatically uses the disk to store the temporary data. This is the default value of --sort-engine.
    • memory: Sorts data changes in memory. It is NOT recommended to use this sorting engine, because OOM is easily triggered when you replicate a large amount of data.
    • file: Entirely uses the disk to store the temporary data. This feature is deprecated. It is NOT recommended to use it in any situation.

  • --config: Specifies the configuration file of the changefeed.

  • sort-dir: Specifies the temporary file directory used by the sorting engine. Note that this option is not supported since TiDB v4.0.13, v5.0.3 and v5.1.0. Do not use it any more.

Configure sink URI with mysql/tidb

Sample configuration:

{{< copyable "shell-regular" >}}

--sink-uri="mysql://root:[email protected]:3306/?worker-count=16&max-txn-row=5000"

The following are descriptions of parameters and parameter values that can be configured for the sink URI with mysql/tidb:

Parameter/Parameter Value Description
root The username of the downstream database
123456 The password of the downstream database
127.0.0.1 The IP address of the downstream database
3306 The port for the downstream data
worker-count The number of SQL statements that can be concurrently executed to the downstream (optional, 16 by default)
max-txn-row The size of a transaction batch that can be executed to the downstream (optional, 256 by default)
ssl-ca The path of the CA certificate file needed to connect to the downstream MySQL instance (optional)
ssl-cert The path of the certificate file needed to connect to the downstream MySQL instance (optional)
ssl-key The path of the certificate key file needed to connect to the downstream MySQL instance (optional)
time-zone The time zone used when connecting to the downstream MySQL instance, which is effective since v4.0.8. This is an optional parameter. If this parameter is not specified, the time zone of TiCDC service processes is used. If this parameter is set to an empty value, no time zone is specified when TiCDC connects to the downstream MySQL instance and the default time zone of the downstream is used.

Configure sink URI with kafka

Sample configuration:

{{< copyable "shell-regular" >}}

--sink-uri="kafka://127.0.0.1:9092/topic-name?kafka-version=2.4.0&partition-num=6&max-message-bytes=67108864&replication-factor=1"

The following are descriptions of parameters and parameter values that can be configured for the sink URI with kafka:

Parameter/Parameter Value Description
127.0.0.1 The IP address of the downstream Kafka services
9092 The port for the downstream Kafka
topic-name Variable. The name of the Kafka topic
kafka-version The version of the downstream Kafka. Optional, 2.4.0 by default. Currently, the earliest supported Kafka version is 0.11.0.2 and the latest one is 2.7.0. This value needs to be consistent with the actual version of the downstream Kafka.
kafka-client-id Specifies the Kafka client ID of the replication task. Optional. TiCDC_sarama_producer_replication ID by default.
partition-num The number of the downstream Kafka partitions. Optional. The value must be no greater than the actual number of partitions. If you do not configure this parameter, the partition number is obtained automatically.
max-message-bytes The maximum size of data that is sent to Kafka broker each time (optional, 64MB by default)
replication-factor The number of Kafka message replicas that can be saved (optional, 1 by default)
protocol The protocol with which messages are output to Kafka. The value options are default, canal, avro, and maxwell (default by default)
max-batch-size New in v4.0.9. If the message protocol supports outputting multiple data changes to one Kafka message, this parameter specifies the maximum number of data changes in one Kafka message. It currently takes effect only when Kafka's protocol is default. (optional, 16 by default)
ca The path of the CA certificate file needed to connect to the downstream Kafka instance (optional)
cert The path of the certificate file needed to connect to the downstream Kafka instance (optional)
key The path of the certificate key file needed to connect to the downstream Kafka instance (optional)
sasl-user The identity (authcid) of SASL/PLAIN or SASL/SCRAM authentication needed to connect to the downstream Kafka instance (optional)
sasl-password The password of SASL/PLAIN or SASL/SCRAM authentication needed to connect to the downstream Kafka instance (optional)
sasl-mechanism The name of SASL/PLAIN or SASL/SCRAM authentication needed to connect to the downstream Kafka instance (optional)

Note:

When protocol is default, TiCDC tries to avoid generating messages that exceed max-message-bytes in length. However, if a row is so large that a single change alone exceeds max-message-bytes in length , to avoid silent failure, TiCDC tries to output this message and prints a warning in the log.

Integrate TiCDC with Kafka Connect (Confluent Platform)

Warning:

This is still an experimental feature. Do NOT use it in a production environment.

Sample configuration:

{{< copyable "shell-regular" >}}

--sink-uri="kafka://127.0.0.1:9092/topic-name?kafka-version=2.4.0&protocol=avro&partition-num=6&max-message-bytes=67108864&replication-factor=1"
--opts registry="http://127.0.0.1:8081"

To use the data connectors provided by Confluent to stream data to relational or non-relational databases, you should use the avro protocol and provide a URL for Confluent Schema Registry in opts. Note that the avro protocol and Confluent integration are experimental.

For detailed integration guide, see Quick Start Guide on Integrating TiDB with Confluent Platform.

Configure sink URI with pulsar

Sample configuration:

{{< copyable "shell-regular" >}}

--sink-uri="pulsar://127.0.0.1:6650/topic-name?connectionTimeout=2s"

The following are descriptions of parameters that can be configured for the sink URI with pulsar:

Parameter Description
connectionTimeout The timeout for establishing a connection to the downstream Pulsar, which is optional and defaults to 30 (seconds)
operationTimeout The timeout for performing an operation on the downstream Pulsar, which is optional and defaults to 30 (seconds)
tlsTrustCertsFilePath The path of the CA certificate file needed to connect to the downstream Pulsar instance (optional)
tlsAllowInsecureConnection Determines whether to allow unencrypted connection after TLS is enabled (optional)
tlsValidateHostname Determines whether to verify the host name of the certificate from the downstream Pulsar (optional)
maxConnectionsPerBroker The maximum number of connections allowed to a single downstream Pulsar broker, which is optional and defaults to 1
auth.tls Uses the TLS mode to verify the downstream Pulsar (optional). For example, auth=tls&auth.tlsCertFile=/path/to/cert&auth.tlsKeyFile=/path/to/key.
auth.token Uses the token mode to verify the downstream Pulsar (optional). For example, auth=token&auth.token=secret-token or auth=token&auth.file=path/to/secret-token-file.
name The name of Pulsar producer in TiCDC (optional)
maxPendingMessages Sets the maximum size of the pending message queue, which is optional and defaults to 1000. For example, pending for the confirmation message from Pulsar.
disableBatching Disables automatically sending messages in batches (optional)
batchingMaxPublishDelay Sets the duration within which the messages sent are batched (default: 10ms)
compressionType Sets the compression algorithm used for sending messages (optional). The value options are LZ4, ZLIB, and ZSTD (default).
hashingScheme The hash algorithm used for choosing the partition to which a message is sent (optional). The value options are JavaStringHash (default) and Murmur3.
properties.* The customized properties added to the Pulsar producer in TiCDC (optional). For example, properties.location=Hangzhou.

For more parameters of Pulsar, see pulsar-client-go ClientOptions and pulsar-client-go ProducerOptions.

Use the task configuration file

For more replication configuration (for example, specify replicating a single table), see Task configuration file.

You can use a configuration file to create a replication task in the following way:

{{< copyable "shell-regular" >}}

cdc cli changefeed create --pd=http://10.0.10.25:2379 --sink-uri="mysql://root:[email protected]:3306/" --config changefeed.toml

In the command above, changefeed.toml is the configuration file for the replication task.

Query the replication task list

Execute the following command to query the replication task list:

{{< copyable "shell-regular" >}}

cdc cli changefeed list --pd=http://10.0.10.25:2379
[{
    "id": "simple-replication-task",
    "summary": {
      "state": "normal",
      "tso": 417886179132964865,
      "checkpoint": "2020-07-07 16:07:44.881",
      "error": null
    }
}]
  • checkpoint indicates that TiCDC has already replicated data before this time point to the downstream.
  • state indicates the state of the replication task.
    • normal: The replication task runs normally.
    • stopped: The replication task is stopped (manually paused).
    • error: The replication task is stopped (by an error).
    • removed: The replication task is removed. Tasks of this state are displayed only when you have specified the --all option. To see these tasks when this option is not specified, execute the changefeed query command.
    • finished: The replication task is finished (data is replicated to the target-ts). Tasks of this state are displayed only when you have specified the --all option. To see these tasks when this option is not specified, execute the changefeed query command.

Query a specific replication task

To query a specific replication task, execute the changefeed query command. The query result includes the task information and the task state. You can specify the --simple or -s argument to simplify the query result that will only include the basic replication state and the checkpoint information. If you do not specify this argument, detailed task configuration, replication states, and replication table information are output.

{{< copyable "shell-regular" >}}

cdc cli changefeed query -s --pd=http://10.0.10.25:2379 --changefeed-id=simple-replication-task
{
 "state": "normal",
 "tso": 419035700154597378,
 "checkpoint": "2020-08-27 10:12:19.579",
 "error": null
}

In the command and result above:

  • state is the replication state of the current changefeed. Each state must be consistent with the state in changefeed list.
  • tso represents the largest transaction TSO in the current changefeed that has been successfully replicated to the downstream.
  • checkpoint represents the corresponding time of the largest transaction TSO in the current changefeed that has been successfully replicated to the downstream.
  • error records whether an error has occurred in the current changefeed.

{{< copyable "shell-regular" >}}

cdc cli changefeed query --pd=http://10.0.10.25:2379 --changefeed-id=simple-replication-task
{
  "info": {
    "sink-uri": "mysql://127.0.0.1:3306/?max-txn-row=20\u0026worker-number=4",
    "opts": {},
    "create-time": "2020-08-27T10:33:41.687983832+08:00",
    "start-ts": 419036036249681921,
    "target-ts": 0,
    "admin-job-type": 0,
    "sort-engine": "unified",
    "sort-dir": ".",
    "config": {
      "case-sensitive": true,
      "enable-old-value": false,
      "filter": {
        "rules": [
          "*.*"
        ],
        "ignore-txn-start-ts": null,
        "ddl-allow-list": null
      },
      "mounter": {
        "worker-num": 16
      },
      "sink": {
        "dispatchers": null,
        "protocol": "default"
      },
      "scheduler": {
        "type": "table-number",
        "polling-time": -1
      }
    },
    "state": "normal",
    "history": null,
    "error": null
  },
  "status": {
    "resolved-ts": 419036036249681921,
    "checkpoint-ts": 419036036249681921,
    "admin-job-type": 0
  },
  "count": 0,
  "task-status": [
    {
      "capture-id": "97173367-75dc-490c-ae2d-4e990f90da0f",
      "status": {
        "tables": {
          "47": {
            "start-ts": 419036036249681921
          }
        },
        "operation": null,
        "admin-job-type": 0
      }
    }
  ]
}

In the command and result above:

  • info is the replication configuration of the queried changefeed.
  • status is the replication state of the queried changefeed.
    • resolved-ts: The largest transaction TS in the current changefeed. Note that this TS has been successfully sent from TiKV to TiCDC.
    • checkpoint-ts: The largest transaction TS in the current changefeed. Note that this TS has been successfully written to the downstream.
    • admin-job-type: The status of a changefeed:
      • 0: The state is normal.
      • 1: The task is paused. When the task is paused, all replicated processors exit. The configuration and the replication status of the task are retained, so you can resume the task from checkpiont-ts.
      • 2: The task is resumed. The replication task resumes from checkpoint-ts.
      • 3: The task is removed. When the task is removed, all replicated processors are ended, and the configuration information of the replication task is cleared up. Only the replication status is retained for later queries.
  • task-status indicates the state of each replication sub-task in the queried changefeed.

Pause a replication task

Execute the following command to pause a replication task:

{{< copyable "shell-regular" >}}

cdc cli changefeed pause --pd=http://10.0.10.25:2379 --changefeed-id simple-replication-task

In the above command:

  • --changefeed-id=uuid represents the ID of the changefeed that corresponds to the replication task you want to pause.

Resume a replication task

Execute the following command to resume a paused replication task:

{{< copyable "shell-regular" >}}

cdc cli changefeed resume --pd=http://10.0.10.25:2379 --changefeed-id simple-replication-task

In the above command:

  • --changefeed-id=uuid represents the ID of the changefeed that corresponds to the replication task you want to resume.

Remove a replication task

Execute the following command to remove a replication task:

{{< copyable "shell-regular" >}}

cdc cli changefeed remove --pd=http://10.0.10.25:2379 --changefeed-id simple-replication-task

In the above command:

  • --changefeed-id=uuid represents the ID of the changefeed that corresponds to the replication task you want to remove.

Update task configuration

Starting from v4.0.4, TiCDC supports modifying the configuration of the replication task (not dynamically). To modify the changefeed configuration, pause the task, modify the configuration, and then resume the task.

{{< copyable "shell-regular" >}}

cdc cli changefeed pause -c test-cf --pd=http://10.0.10.25:2379
cdc cli changefeed update -c test-cf --pd=http://10.0.10.25:2379 --sink-uri="mysql://127.0.0.1:3306/?max-txn-row=20&worker-number=8" --config=changefeed.toml
cdc cli changefeed resume -c test-cf --pd=http://10.0.10.25:2379

Currently, you can modify the following configuration items:

  • sink-uri of the changefeed.
  • The changefeed configuration file and all configuration items in the file.
  • Whether to use the file sorting feature and the sorting directory.
  • The target-ts of the changefeed.

Manage processing units of replication sub-tasks (processor)

  • Query the processor list:

    {{< copyable "shell-regular" >}}

    cdc cli processor list --pd=http://10.0.10.25:2379
    [
        {
                "id": "9f84ff74-abf9-407f-a6e2-56aa35b33888",
                "capture-id": "b293999a-4168-4988-a4f4-35d9589b226b",
                "changefeed-id": "simple-replication-task"
        }
]

  • Query a specific changefeed which corresponds to the status of a specific replication task:

    {{< copyable "shell-regular" >}}

    cdc cli processor query --pd=http://10.0.10.25:2379 --changefeed-id=simple-replication-task --capture-id=b293999a-4168-4988-a4f4-35d9589b226b
    {
  "status": {
    "tables": {
      "56": {    # ID of the replication table, corresponding to tidb_table_id of a table in TiDB
        "start-ts": 417474117955485702
      }
    },
    "operation": null,
    "admin-job-type": 0
  },
  "position": {
    "checkpoint-ts": 417474143881789441,
    "resolved-ts": 417474143881789441,
    "count": 0
  }
}

    In the command above:

    • status.tables: Each key number represents the ID of the replication table, corresponding to tidb_table_id of a table in TiDB.
    • resolved-ts: The largest TSO among the sorted data in the current processor.
    • checkpoint-ts: The largest TSO that has been successfully written to the downstream in the current processor.

Task configuration file

This section introduces the configuration of a replication task.

# Specifies whether the database names and tables in the configuration file are case-sensitive.
# The default value is true.
# This configuration item affects configurations related to filter and sink.
case-sensitive = true

# Specifies whether to output the old value. New in v4.0.5. Since v5.0, the default value is `true`.
enable-old-value = true

[filter]
# Ignores the transaction of specified start_ts.
ignore-txn-start-ts = [1, 2]

# Filter rules.
# Filter syntax: https://docs.pingcap.com/tidb/stable/table-filter#syntax.
rules = ['*.*', '!test.*']

[mounter]
# mounter thread counts, which is used to decode the TiKV output data.
worker-num = 16

[sink]
# For the sink of MQ type, you can use dispatchers to configure the event dispatcher.
# Supports four dispatchers: default, ts, rowid, and table.
# The dispatcher rules are as follows:
# - default: When multiple unique indexes (including the primary key) exist or the Old Value feature is enabled, events are dispatched in the table mode. When only one unique index (or the primary key) exists, events are dispatched in the rowid mode.
# - ts: Use the commitTs of the row change to create Hash and dispatch events.
# - rowid: Use the name and value of the selected HandleKey column to create Hash and dispatch events.
# - table: Use the schema name of the table and the table name to create Hash and dispatch events.
# The matching syntax of matcher is the same as the filter rule syntax.
dispatchers = [
    {matcher = ['test1.*', 'test2.*'], dispatcher = "ts"},
    {matcher = ['test3.*', 'test4.*'], dispatcher = "rowid"},
]
# For the sink of MQ type, you can specify the protocol format of the message.
# Currently four protocols are supported: default, canal, avro, and maxwell. The default protocol is TiCDC Open Protocol.
protocol = "default"

Notes for compatibility

  • In TiCDC v4.0.0, ignore-txn-commit-ts is removed and ignore-txn-start-ts is added, which uses start_ts to filter transactions.
  • In TiCDC v4.0.2, db-dbs/db-tables/ignore-dbs/ignore-tables are removed and rules is added, which uses new filter rules for databases and tables. For detailed filter syntax, see Table Filter.

Output the historical value of a Row Changed Event New in v4.0.5

Warning:

Currently, outputting the historical value of a Row Changed Event is still an experimental feature. It is NOT recommended to use it in the production environment.

In the default configuration, the Row Changed Event of TiCDC Open Protocol output in a replication task only contains the changed value, not the value before the change. Therefore, the output value neither supports the new collation framework introduced in TiDB v4.0, nor can be used by the consumer ends of TiCDC Open Protocol as the historical value of a Row Changed Event.

Starting from v4.0.5, TiCDC supports outputting the historical value of a Row Changed Event. To enable this feature, specify the following configuration in the changefeed configuration file at the root level:

{{< copyable "" >}}

enable-old-value = true

After this feature is enabled, you can see TiCDC Open Protocol - Row Changed Event for the detailed output format. The new TiDB v4.0 collation framework will also be supported when you use the MySQL sink.

Replicate tables without a valid index

Since v4.0.8, TiCDC supports replicating tables that have no valid index by modifying the task configuration. To enable this feature, configure in the changefeed configuration file as follows:

{{< copyable "" >}}

enable-old-value = true
force-replicate = true

Warning:

For tables without a valid index, operations such as INSERT and REPLACE are not reentrant, so there is a risk of data redundancy. TiCDC guarantees that data is distributed only at least once during the replication process. Therefore, enabling this feature to replicate tables without a valid index will definitely cause data redundancy. If you do not accept data redundancy, it is recommended to add an effective index, such as adding a primary key column with the AUTO RANDOM attribute.

Unified Sorter

Unified sorter is the sorting engine in TiCDC. It can mitigate OOM problems caused by the following scenarios:

  • The data replication task in TiCDC is paused for a long time, during which a large amount of incremental data is accumulated and needs to be replicated.
  • The data replication task is started from an early timestamp so it becomes necessary to replicate a large amount of incremental data.

For the changefeeds created using cdc cli after v4.0.13, Unified Sorter is enabled by default; for the changefeeds that have existed before v4.0.13, the previous configuration is used.

To check whether or not the Unified Sorter feature is enabled on a changefeed, you can execute the following example command (assuming the IP address of the PD instance is http://10.0.10.25:2379):

{{< copyable "shell-regular" >}}

cdc cli --pd="http://10.0.10.25:2379" changefeed query --changefeed-id=simple-replication-task | grep 'sort-engine'

In the output of the above command, if the value of sort-engine is "unified", it means that Unified Sorter is enabled on the changefeed.

Note:

  • If your servers use mechanical hard drives or other storage devices that have high latency or limited bandwidth, use the unified sorter with caution.
  • By default, Unified Sorter uses data_dir to store temporary files. It is recommended to ensure that the free disk space is greater than or equal to 500 GiB. For production environments, it is recommended to ensure that the free disk space on each node is greater than (the maximum checkpoint-ts delay allowed by the business) * (upstream write traffic at business peak hours). In addition, if you plan to replicate a large amount of historical data after changefeed is created, make sure that the free space on each node is greater than the amount of replicated data.
  • Unified sorter is enabled by default. If your servers do not match the above requirements and you want to disable the unified sorter, you need to manually set sort-engine to memory for the changefeed.
  • To enable Unified Sorter on an existing changefeed that uses memory to sort, see the methods provided in How do I handle the OOM that occurs after TiCDC is restarted after a task interruption?.

Eventually consistent replication in disaster scenarios

Starting from v5.3.0, TiCDC provides the eventually consistent replication capability in disaster scenarios. When a disaster occurs in the primary TiDB cluster and the service cannot be resumed in a short period of time, TiCDC needs to provide the ability to ensure the consistency of data in the secondary cluster. Meanwhile, TiCDC needs to allow the business to quickly switch the traffic to the secondary cluster to avoid the database being unavailable for a long time and affecting the business.

This feature supports TiCDC to replicate incremental data from a TiDB cluster to the secondary relational database TiDB/Aurora/MySQL/MariaDB. In case the primary cluster crashes, TiCDC can recover the secondary cluster to a certain snapshot in the primary cluster within 30 minutes, given the condition that before disaster the replication status of TiCDC is normal and replication lag is small. It allows data loss of less than 5 minutes, that is, RPO <= 30min, and RTO <= 5min.

Prerequisites

  • Prepare a highly available Amazon S3 storage or NFS system for storing TiCDC's real-time incremental data backup files. These files can be accessed in case of an primary cluster disaster.
  • Enable this feature for changefeeds that need to have eventual consistency in disaster scenarios. To enable it, you can add the following configuration to the changefeed configuration file.
[consistent]
# Consistency level. Options include:
# - none: the default value. In a non-disaster scenario, eventual consistency is only guaranteed if and only if finished-ts is specified. 
# - eventual: Uses redo log to guarantee eventual consistency in case of the primary cluster disasters. 
level = "eventual"

# Individual redo log file size, in MiB. By default, it's 64. It is recommended to be no more than 128.
max-log-size = 64

# The interval for flushing or uploading redo logs to S3, in milliseconds. By default, it's 1000. The recommended range is 500-2000.
flush-interval = 1000

# Form of storing redo log, including nfs (NFS directory) and S3 (uploading to S3).
storage = "s3://logbucket/test-changefeed?endpoint=http://$S3_ENDPOINT/"

Disaster recovery

When a disaster happens in the primary cluster, you need to recover manually in the secondary cluster by running the cdc redo command. The recovery process is as follows.

  1. Ensure that all the TiCDC processes have exited. This is to prevent the primary cluster from resuming service during data recovery and prevent TiCDC from restarting data synchronization.
  2. Use cdc binary for data recovery. Run the following command:
cdc redo apply --tmp-dir="/tmp/cdc/redo/apply" \
    --storage="s3://logbucket/test-changefeed?endpoint=http://10.0.10.25:24927/" \
    --sink-uri="mysql://normal:[email protected]:3306/"

In this command:

  • tmp-dir: Specifies the temporary directory for downloading TiCDC incremental data backup files.
  • storage: Specifies the address for storing the TiCDC incremental data backup files, either an Amazon S3 storage or an NFS directory.
  • sink-uri: Specifies the secondary cluster address to restore the data to. Scheme can only be mysql.