Changelog

All notable changes to this project will be documented in this file. The format is based on Keep a Changelog.

4.8.1 - 2024-06-19

changed

29_ageclass module 29_ageclass has been renamed to 28_ageclass to make space for 29_cropland just before 30_croparea
30_crop module 30_crop renamed to 30_croparea, which now only accounts for crop area.
30_crop Semi-Natural Vegetation (SNV) implementation has been moved from 30_crop to 29_cropland
30_crop the previous 30_crop/endo_apr21 realization has been moved to 30_croparea/simple_apr24
30_crop the two realizations penalty_apr22 and rotation_apr22 have been merged into a single 30_croparea/detail_apr24 realization
default.cfg update additional data to rev4.51
scripts adjusted SLURM job handling
scripts updated EL2p0 start scripts

added

10_land added interface pm_land_hist with historic land use patterns
29_cropland new module 29_cropland accounting for crop area, fallow cropland and tree cover on cropland with two realizations: detail_apr24 and simple_apr24 (default).
42_water_demand added non-agricultural water demand for entire year

removed

32_forestry removed technical balance term v32_land_missing_ndc

fixed

22_land_conservation avoid infeasibilities due to very small numbers, account for cropland tree cover and lower bound of cropland
32_forestry avoid infeasibilities due to very small numbers
35_natveg avoid infeasibilities due to very small numbers
44_biodiversity Fixing to SSP2 parameters until 2025 was not working
config update to input data rev4.109. In the previous rev4.108, MER GDP was wrong and was identical to PPP GDP

4.8.0 - 2024-06-10

changed

14_yields revised timber yield calculations
15_food, default.cfg and scenario_config.csv changed fader setup and introduced new switches for specifying food substitution scenarios and exogeneous food intake scenarios
22_land_conservation and default.cfg Added options for baseline protection
32_forestry renamed interface pm_demand_ext to pm_demand_forestry
32_forestry revision and simplification of forestry implementation, renamed realization from dynamic_feb21 to dynamic_may24.
35_natveg vm_land(j2,"forestry") included in NPI/NDC constraint q35_min_forest
35_natveg replaced the realisation dynamic_feb21 with realisation pot_forest_may24. The new realisation provides additional information on the potential forest area, which is now used to constrain forest and forestry expansion and recovery. The remaining area for forest establishment is provided to the forestry module via the new interface parameter pcm_max_forest_est.
41_area_equipped_for_irrigation updated (non-default) AEI data (from Mehta2022 to Mehta2024)
52_carbon Separate carbon densities for forest and other land. Before there was only a single carbon density for natural vegetation land.
70_livestock default.cfg and scenario_config.csv** changed fader setup and introduced new switches for specifying feed substitution with SCP scenarios
80_optimization Simplifed cycling through CONOPT4, CONOPT4 with OPTFILE, CONOPT4 without preprocessing and CONOPT3.
default.cfg changed default realization for 44_biodiversity to new realization bii_target_apr24
default.cfg defaults for cfg$gms$sm_fix_SSP2, cfg$gms$sm_fix_cc and other switches changed from 2020 to 2025
default.cfg Forestry sector included by default by using the ForestryEndo settings from scenario_config.csv: s32_initial_distribution = 1, s32_demand_establishment = 1, s32_hvarea = 2, s35_secdf_distribution = 2, s35_hvarea = 2, s73_timber_demand_switch = 1
default.cfg update additional data to rev4.50
scripts modified agmip_merge_report to use piamInterfaces
scripts start/test_runs.R added 2 more test runs from FSEC

added

15_food added additional sigmoid food substition scenarios sigmoid_75pc_25_50, sigmoid_50pc_25_50 and sigmoid_25pc_25_50
21_trade Minimum trade margin for forestry products s21_min_trade_margin_forestry
30_crop added regional cropland equation q30_crop_reg and presolve growth constraint
44_biodiversity added new realization bii_target_apr24, taking into account f44_rr_layer
60_bioenergy added new realization 1st2ndgen_priced_feb24 to enable price-driven 2nd gen bioenergy production
73_timber added interface im_timber_prod_cost
citation added abstract
core added coup2110timesteps
default.cfg added cropland growth constraint cfg$gms$s30_annual_max_growth
default.cfg added settings for new price-driven bioenergy realization 1st2ndgen_priced_feb24: cfg$gms$s60_2ndgen_bioenergy_dem_min_post_fix, cfg$gms$c60_bioenergy_subsidy_fix_SSP2, s60_bioenergy_gj_price_1st,
default.cfg added technical cost for missing BII increase cfg$gms$s44_cost_bii_missing
default.cfg cfg$gms$s80_secondsolve option for second solve statement with 0=off as default
scenario_config.csv added preset for GENIE project
scripts added "checkSummation" output script for consistency checking a report.mif
scripts added automatic set writer for new bioenergy realization to start_functions
scripts added start scripts for the GENIE project s60_bioenergy_price_2nd, c60_price_implementation

removed

14_yields removed interface pm_timber_yield_initial
21_trade removed interface pm_selfsuff_ext, removed v21_manna_from_heaven
32_forestry removed interface pm_representative_rotation
35_natveg removed growing stock calculation and calibration, which is no longer needed.
62_material/16_demand Removed double structure for forestry products. pm_demand_foresty is now used in 62_material
73_timber removed interfaces pm_demand_forestry_future and sm_wood_density
scripts removed support for spam files in start_functions
scripts/output/extra removed scripts disaggregation_cropsplit and disaggregation_transitions

fixed

14_yields fix division by zero in preloop of managementcalib_aug19
44_biodiversity avoid division by zero
58_peatland Added balance variable to avoid random infeasibilites
80_optimization fixed a bug in nlp_apr17; cycling through CONOPT4, CONOPT4 without preprocessing and CONOPT3 was not working
extra/disaggregation fixed bug in disaggregation of land conservation related to switch from 59k to 67k that produced erroneous outputs
scenario_config.csv same revision for input files as in default.cfg
scenario_fsec.csv scenario settings
scripts/start/test_runs.R include all default output script, in particular disaggregation.R, which is needed for BII
start/projects/fsec.R scenario settings

4.7.3 - 2024-04-12

changed

21_trade Revision of trade module. Replaced cfg$gms$s21_trade_bal_damper in favour of cfg$gms$k_import21, which allows for additional imports to maintain feasibility
21_trade v21_import_for_feasibility now available for all countries, not just for importers
70_livestock if c70_fac_req_regr is set to reg: use of USDA/FAO values for historic factor requirements for livestock instead of using regression values and change of calibration year from 2005 to 2010 for regional factor requirements regression
config updated FSEC scenario config for revision and included new calibration file (after cost fix in preprocessing)
default.cfg updated inputdata revision to 4.104 to have NDC scenarios included
scripts cfg$gms$s35_secdf_distribution <- 2 for FSEC
scripts modified output reporting for SEALS to account for forestry plantations
scripts/calibration/landconversion_cost.R Revised calibration approach for conversion costs for cropland. Information from all calibration time steps in combination with a lowpass filter is now used for deriving the calibration factors, which avoids the previous zickzack pattern. The previous option cfg$damping_factor_landconversion_cost has been removed in favor of cfg$lowpass_filter_landconversion_cost.

added

14_yields added minimum threshold for wood yields. Below this threshold, wood yields are set to zero.
config added switch for minimum timber yields
56_ghg_policy added NDC scenarios
60_bioenergy added NDC scenarios
scripts start script for EAT2p0 Deep Dive project

fixed

15_food Small number rather 0 in condition checking calorie balancing
34_urban static realization was not working because vm_carbon_stock was referenced without the set stockType
52_carbon removing jump of carbon content into fully grown forest when a forest changes from second-last age class to last age-class.
58_peatland Equation q58_scalingFactorExp revised to avoid division by zero.
80_optimization duplicated solve statement in all instances to avoid non-matchting left- and right-hand sides of equations

4.7.2 - 2024-04-02

changed

21_trade Revision of trade module. Replaced cfg$gms$s21_trade_bal_damper in favour of cfg$gms$k_import21, which allows for additional imports to maintain feasibility
58_peatland Threshold in equations changed from 1e-10 to 1e-8 to avoid rare divisions by zero
70_livestock if c70_fac_req_regr is set to reg: use of USDA/FAO values for historic factor requirements for livestock instead of using regression values and change of calibration year from 2005 to 2010 for regional factor requirements regression
config updated FSEC scenario config for revision and included new calibration file (after cost fix in preprocessing)
scripts modified output reporting for SEALS to account for forestry plantations

added

30_crop Improved representation of cropland requiring relocation in response to introducing semi-natural habitat at the 1 km level based on high-resolution satellite imagery.
config added .codeCheck with additonal configuration when running gms::codeCheck
scripts add additional BII reporting variables in FSDP_collect.R
scripts added a new validation_cell.R output script that generates a pdf with the comparison of magpie land use and crop type outputs with LUH and MAPSPAM historical data at cellular resolution.

removed

core removed no longer needed set si Suitability classes

fixed

52_carbon i52_land_carbon_sink was not identical before 2020 for different RCPs. Fixed by setting to RCPBU until the year defined in sm_fix_cc.
inputdata currency fixed in historic value of production for crops and livestock which affects e.g. total labor costs and in turn hourly labor costs, bugfix in aggregation weight of capital cost share out of factor costs

4.7.1 - 2024-02-28

changed

15_food Added improved EAT Lancet diet implementation (EAT 2p0)
21_trade s21_trade_bal_damper for roundwood changed from 0.75 to 0.65
31_past in grasslands_apr22 realization: changed structure of f31_pastr_suitability to align with ssp-rcp specific input data formulation. Changed input filename from cs3 to cs2. Added cc, nocc and nocc_hist options for i31_manpast_suit and changed input gams code from table to parameter. Climate scenario assignment moved from preloop.gms to input.gms. Removed pastSuit set in sets.gms as not needed anymore. Adjusted not_used.txt in both grasslands_apr22 and static realizations.
default.cfg and scenario_config.csv Default for cfg$gms$c56_emis_policy changed from redd+natveg_nosoil to reddnatveg_nosoil,i.e. timber plantations are excluded from carbon pricing by default
default.cfg changed default for cfg$gms$s32_aff_prot from 0 to 1
default.cfg changed default for cfg$gms$s56_buffer_aff from 0.2 to 0.5
default.cfg Default for cfg$gms$c56_cprice_aff changed from forestry_vegc to secdforest_vegc
default.cfg Default for cfg$gms$peatland changed from on to v2
default.cfg update default cfg$gms$c56_pollutant_prices and cfg$gms$c60_2ndgen_biodem to R32M46-SSP2EU-NPi
default.cfg update input data to rev 4.99 (new validation data, new EATLancet recommendations, new semi-natural vegtation cropland data)
scenario_config.csv removed erroneous setting cc from column input
scenario_config.csv settings for cfg$gms$s35_secdf_distribution in ForestryEndo and ForestryExo changed from 2 to 0
start_functions Check if cfg$recalibrate is consistent with cfg$gms$s14_use_yield_calib

added

32_forestry new interfaces vm_land_forestry, pcm_land_forestry vm_landexpansion_forestry and vm_landreduction_forestry
56_ghg_policy_ added new trajectories for R32M46
60_bioenergy added new trajectories for R32M46
scripts added peatland to output/extra/disaggregation.R

removed

58_peatland removed realization "on"
default.cfg Removed description of cfg$gms$c31_past_suit_scen since no longer needed due to changes in 31_past described below. Its function is now done by cfg$gms$c31_grassl_yld_scenario.

fixed

21_trade introduced s21_manna_from_heaven for fixing v21_manna_from_heaven to zero. Without fixing to zero, v21_manna_from_heaven was used unnecessarily in runs started with highres.R
32_forestry bugfix unit p32_observed_gs_reg
32_forestry keep c-density for timber plantations constant after rotation length to avoid unrealistic carbon sequestration in unharvested timber plantation
35_natveg bugfixes ac_est
35_natveg removed scaling of pm_carbon_density_ac
52_carbon bugfix acx long-term carbon density
scripts bugfix highres.R for bioenergy demand and GHG prices in coupled runs
scripts disaggregation_LUH2.R which no longer relies on the old raster-based write.magpie for nc files
scripts fixed disaggregation.R and disaggregation_LUH2.R to be used with 67k
scripts fixed memory spike leading to crashes in disaggregation.R
scripts fixed writing of NetCDF files in output/reportMAgPIE2SEALS.R

4.7.0 - 2023-12-11

changed

14_yields_and_config The new default is to not use yield calibration factors from a calibration run. The switch s14_use_yield_calib can optionally reenable the use of yield calibration factors.
36_employment regression between hourly labor regression and GDP pc changed from linear to log-log
inputdata Now using inputdata rev4.94 which is based on 67420 cells (67k, previously 59k)
scripts For the emulator scripts select a different bioenergy demand variable that excludes bioenergy sources other than second generation bioenergy crops. Set the minimal bioenergy demand to zero. Both avoid artificial clustering of data points and allow for better fits.
scripts LUH2_disaggregation output script was modified. Specifically, flooded area was made compatible with the LUH definition, cropland and grazing land were added to the states.nc file, and specific naming/details (datatype, zname, xname, and yname) were added when creating the .nc files.

added

14_yields/config Added option for considering impacts of land degradation on yields. If s14_degradation is switched to 1, MAgPIE will include cluster-specific information on the state of nature's contributions to people relevant for yields ./modules/14_yields/input/f14_yld_ncp_report.cs3.
18_residues Included cluster-level residue realization, for cluster-level production of residues (but balancing of recycling and burning budgets remains at region-level, for computational lightness)
32_forestry new interface vm_land_forestry
58_peatland added realization "v2" with updated peatland map and GHG emission factors

fixed

inputdata There was a major bug (related to proj/terra) in the rev4.91 inputdata that was fixed with rev4.92
inputdata There was another bug (terra default na.rm changed) in the inputdata that was fixed with rev4.93
scripts Fixed a bug in NPI/NDC calculations leading to missing AD policies when run with 67k

4.6.11 - 2023-09-05

changed

scripts All time steps between 2015 and 2050 are now reported to SEALS

fixed

70_livestock fixed division by zero that could occur depending on the scenario set-up

4.6.10 - 2023-08-16

changed

config update preprocessing to newest input data v4.88 with new transport costs
GitHub action the github action is now faster, because it installs binary packages from Posit Package Manager
scenario_config.csv update preprocessing to newest input data v4.88
scripts output.R is now faster, because it no longer searches runfolder renvs for full.gms files

fixed

scripts check_config does not warn about c_input_gdx_path anymore while running empty model
scripts fixed erronoeous if clause in output.R
scripts fixed output/extra/disaggregation_LUH2.R. The script was not working any more because magpie4::protectedArea was changed to return protected area for all land types. Moreover, the script now also works for runs without dynamic forestry (default run) but with a warning message.

4.6.9 - 2023-07-27

fixed

70_livestock consideration of milk demand in the calculation of the pasture management factor
scripts Fixed inaccuracies and inconsistent application of SNV policies during disaggregation in luscale::interpolateAvlCroplandWeighted(), which is called in extra/disaggregation.R

4.6.8 - 2023-07-17

changed

41_area_equipped_for_irrigation new AEI data (Mehta2022) replacing old Siebert data
80_optimization printing of solprint when solver status is 7 re-activated
scripts start_functions.R can now handle clusters per region flexibly
scripts the REMIND-MAgPIE coupling now uses renv

added

31_past added cc, nocc and nocc_hist options for c31_past_suit_scen and c31_grassl_yld_scenario
32_carbon added nocc and nocc_hist option for c52_land_carbon_sink_rcp
71_disagg_lvst added new realisation foragebased_jul23 which solves GAMS issues at higher spatial resolutions
config added cfg$results_folder_highres which allows to modify the output folder used in the highres.R output script
config new area equipped for irrigation (AEI) data in preprocessing (4.87)
scenario_config.csv added a scenario for the NGFS project
scripts New output script for reporting disaggregated land use patterns to the SEALS (Spatial Economic Allocation Landscape Simulator) downscaling model

removed

config s80_num_nonopt_allowed
scripts removed .snapshot.Rprofile and the Rprofile.R script, renv now fully supersedes snapshots

fixed

30_crop corrected q30_cropland in module realization rotation_apr22, where fallow land was on the wrong side of the equation
71_disagg_lvst reworked foragebased_aug18 (including removal of linear version and correction of balance flow calculation)
80_optimization resolve was not working in nlp_par realization due to s80_num_nonopt_allowed
config corrected wrong names of parameters for peatland costs
config updated scenario configs to newest preprocessing (4.87)

4.6.7 - 2023-05-10

changed

09_drivers Harmonization of sets for population, gdp, pal and demography
56_ghg_policy added emission policies without GHG emissions from peatlands
config added scenario SSP2EU in scenario_config.csv
config modified eat_lancet_diet in scenario_config.csv
config update of additional data to rev4.43
config update of regional and cellular inputs to 4.85 in default.cfg and scenario_config.csv
scripts added output script for forest area change at cluster level
scripts NDC/NPI calculations can now handle 59k and 67k cell inputs

added

15_food added an option in s15_exo_diet to allow for exogenous diet scenario for India

4.6.6 - 2023-05-10

changed

config updated scenario_fsec.csv to reflect new GST validation
scripts included new output indicator for water
scripts updated global surface temperature maps to new RCPs per scenario

4.6.5 - 2023-03-29

changed

22_land_conservation Replaced old options for land conservation by new conservation priority areas. These include among others a new 30by30 template (based on Key Biodiversity Areas, unprotected habitat in Biodiversity Hotspots, Ecoregions with a high beta-diversity from the Global Safety Net (Dinerstein et al. 2020) and critical connectivity areas (Brennan et al. 2022), a new Half Earth template based on the Global Safety Net (Dinerstein et al. 2020) and land conservation of irrecoverable carbon (Noon et al. 2022).
56_ghg_policy renamed cfg$mute_ghgprices_until to cfg$gms$c56_mute_ghgprices_until and changed the default to y2030, i.e. no GHG emission pricing in the AFOLU sector before (and including) 2030. This setting will be also used in coupled REMIND-MAgPIE runs.
config input data revision to rev4.82 to include new conservation priority areas
config new options for conservation priority areas (including new 30 by 30 protection)
scripts calc_calib.R bug fix. If the calibration factor of a region is equal to the maximum allowed value, its divergence is set the maximum allowed divergence.
scripts Disaggregation of BII merged into standard extra/disaggregation.R
scripts Disaggregation of land use to 0.5° now takes land conservation into account - i.e. cropland expansion is not mapped to areas that are subject to land conservation

added

56_ghg_policy added switch s56_minimum_cprice
config minimum CO2 price (s56_minimum_cprice) of 5 USD per tCO2 (18 USD per tC) for all future time steps in case of NDC policy to guide land-use decisions
scripts added output script which writes landuse data on cluster resolution to a shapefile

removed

56_ghg_policy removed s56_ghgprice_phase_in and s56_ghgprice_start
scripts removed argument mute_ghgprices_until, now handeld in GAMS code

fixed

31_past fixed pasture suitability to SSP2 before and including 2020 (only relevant for grassland implementation)
56_ghg_policy the renamed switch c56_mute_ghgprices_until is now always used for coupled as well as standalone runs.
scripts Fixed occasional memory failure in the disaggregation script

4.6.4 - 2023-02-22

changed

15_food Interpret EAT-Lancet guidelines not as target but as lower/upper limits
config changed order of output scripts. Some functions in rds_report require gridded outputs.
config input data revision to rev4.81 for trade margin bugfix
config scenario_fsec.csv updated input data tgz
config scenario_fsec.csv updated to new biodiversity scenario
scripts fsec.R and project_FSEC_Scenarios.R include capitalSubst and landscapeElements scenarios
scripts highres.R changed default resolution to c1000
scripts recalibrate.R and recalibrate_realization were modified to always use best_calib for the yield calibration.
scripts updated FSEC scenario start and output scripts
scripts when manually running output scripts for multiple runs the lockfile is only created once
sticky_labor changed labor cost share constraint from regional to cellular level
sticky_labor renamed equation q38_labor_capital_ratio to q38_labor_share_target

added

15_food half_overweight scenario added
21_trade New Bilateral trade realization selfsuff_reduced_bilat22 for bilateral trade within selffsuff constraints
32_forestry added switch s32_aff_prot for protection of afforested areas (0=until end of planning horizon 1=forever)
56_ghg_policy added two scenarios for GHG emission pricing and options for afforestation
config added options for afforestation assumptions and updated additional data to 4.38
config added setting cfg$keep_restarts which controls whether restart files should be kept after a run finished
config changed default for s_use_gdx from 2 to 0
scripts added restart points after each time step from which the model can now be restarted if the simulation aborts at some point
scripts added SLURM dayMax submission type for standby QOS
sticky_labor nl_fix, nl_relax and nl_release added

removed

42_water_demand removed fm_multicropping factor because of fallow inconsistency

fixed

14_yields nl_fix updated to current equation
32_forestry pm_land_conservation(t,j,"secdforest","restore") now accounts for the rotation length in timber plantations to avoid infeasibilities
44_biodiversity added regional layer i in bii_target realisation to make it compatible with the high-resolution parallel optimization output script
59_som division by zero prevented by if condition
scripts fixed a bug where renvs for high resolution runs were missing some packages
scripts fixed in the calc_calib.R script the saving of calib_factors used in each iteration to ensure that they correspond to the divergence reported. Changed divergence from zero to NA for those iterations where calib_factors are above the limit. The best_calib selection criterion was changed from selecting the factors of the iteration with the lowest standard deviation to the selection, for each region, of the factor of the iteration with the lowest divergence. Also, factors from the first iteration are now not considered, and if two different factors had the same divergence for a region, the one of the latest iteration is picked.

4.6.3 - 2023-01-19

changed

15_food changed anthro_iso_jun22 realisation such that results in case of exo_diet = 1/0 and exo_waste = 1/0 are identical until 2020
30_crop identical assumptions for bioenergy until 2020
38_factor_costs changed name of set req to factors (also used in 11_costs, 57_maccs, 70_livestock)
38_factos_costs sticky_labor realization: included option to set a labor share target
62_material Bioplastic demand identical in all scenarios until 2020
config added s38_target_labor_share, s38_targetyear_labor_share and s38_target_fulfillment to define labor share target scnarios
config and 38_factor_costs changed name of s38_fix_capital_need to s38_startyear_labor_substitution
config update input data to rev4.79

added

31_past added additional limitation (single climate scenario input) for grasslands_apr22
59_som added new cellpool_jan23 realization with updated 2019 IPCC guidelines values
scripts added start script which starts an empty model just regenerating a previous run

fixed

scripts make sure that c_title in the GAMS code is not containing dots which otherwise could lead to compilation errors

4.6.2 - 2023-01-12

changed

36_employment include labor costs from MACCs in employment
38_factor_cots renamed p36_cost_shares to pm_cost_share_crops
57_maccs split costs into labor and capital
config scenario_fsec.csv update
config updated SHAPE SDP scenarios in scenario_config.csv
scripts FSDP_collect FSDP_process fsec.R updates

added

renv MAgPIE now runs in an isolated, stable, reproducible R package environment
scripts added output script that generates a short mif containing only variables relevant for the REMIND coupling
scripts added output script that generates subnational validation outputs for fable_India projects
setup required R packages are automatically installed

4.6.1 - 2022-12-13

changed

42_water_demand replaced f42_env_flow_policy with macro
30_crop replaced f30_scenario_fader with macro
30_crop/config changed switch c30_rotation_scenario_speed to s30_rotation_scenario_target
30_crop/config changed switch c30_snv_target to s30_snv_scenario_target
config changed default value for c30_marginal_land from 'all_marginal' to 'q33_marginal' for better spatial cropland patterns

added

10_land added vm_lu_transitions as interface
10_land added interface fm_land_iso for consistency
30_crop/config added switch s30_rotation_scenario_start
30_crop/config added switch s30_snv_scenario_start
30_crop/config added switch for set land_snvfor defining which land cover types are allowed in the semi-natural vegetation policy in cropland scenarios
39_landconversion scalar s39_reward_crop_reduction provides a cropland reduction reward

removed

10_land removed feb15 realization
10_land removed the interfaces vm_croplandexpansion and vm_croplandreduction
30_crop removed f30_scenario_fader.csvinput
39_landconversion removed s39_reward_shr
config validation_short.R output script is no longer run by default after each run
scripts removed remind2::deletePlus in coupling interface of start_function

fixed

59_som fixed land use change tracking for non-cropland pools in the cellpool_aug16 realization
config changed default value for s56_limit_ch4_n2o_price from 1000 to 4000 for consistency with c57_macc_version = "PBL_2022"
scripts rewrite of land conversion cost calibration script landconversion_cost.R

4.6.0 - 2022-11-09

changed

18_residues bugfix in q18_cost_prod_res
36_employment included calculations for minimum wage scenario
38_factor_costs included labor cost scaling in case of wage scenario
42_water_demand account for multiple cropping in water requirements
51_nitrogen moved maccs into emission modules. change of interface from vm_btm_reg to vm_emissions_reg
52_carbon change of interface from vm_btm_reg to vm_emissions_reg
52_carbon Soil C of urban areas set to soil C of natural other land
57_maccs default changed from PBL2007 to PBL2022
58_peatland moved maccs into emission modules. change of interface from vm_btm_reg to vm_emissions_reg
59_som Now calculates soil C for fallow and urban areas
62_material added biomass demand for bioplastic production
70_livestock included labor cost scaling in case of wage scenario
config added s62_max_dem_bioplastic and s62_midpoint_dem_bioplastic to define bioplastic scenario
config adjusted PR template
config best_calib set to FALSE in default
config new switches s36_minimum_wage, s36_scale_productivity_with_wage, and s38_fix_capital_need
config non-food system emission MAGICC switch
config updated config to new module setup of MACCs
config updated default realization of 15_food from anthropometrics_jan18 to anthro_iso_jun22
config updated SHAPE SDP scenarios in scenario_config.csv
documentation added literature
inputs update of NPi for China (additional data 4.30)
inputs updated f56_emis_policy (additional data 4.29)
inputs updated non-food initial prices, MACCs curves, and removed suitability threshold of 0.1 in all_marginal setting
scripts added single time step run to test runs
scripts fix in start_functions for the calibration setting ifneeded
scripts FSDP_collect handles the health impacts data provided by Marco Springmann, distributed it into the scenario's various reports. It performs a similar operation for global nutrient surplus (which must be calculated on the grid-level and then aggregated).- 13_tc relaxed vm_tau upper limit
scripts log files are now written in a subfolder "logs"
scripts output/extra/disaggregation_BII.R adjusted BII output for primary and secondary other land
scripts quit with exit code = gams status at the end of submit.R
scripts update of rds_report to allow gridded intermediate outputs
scripts updated FSEC start and output scripts
scripts updated FSEC start scripts and related config files to introduce new scenarios
scripts/start cleanup of old start scripts

added

14_yields added input file containing AQUASTAT yield calibration factors and switch s14_calib_ir2rf in default.cfg to activate this yield calibration
15_food added new realization with country level exogenous diets, product-specific intake estimates, new scenarios for exogenous BMI and decomposition switches for EAT Lancet diets. Simplified code and improved iteration procedure.
50_nr_soil_budget new module realization for more consistent MACCs implementation. change of interface from vm_btm_reg to vm_emissions_reg
53_methane moved maccs into emission modules. change of interface from vm_btm_reg to vm_emissions_reg
56_ghg_policy added new ecosystem protection scenarios
56_ghg_policy new module realization for more consistent MACCs implementation
57_maccs added new Marginal Abatement Cost Curve (MACCs) data set from PBL (PBL2022)
57_maccs new more consistent maccs implementation. different mapping of emission sources to maccs.
f32_forest added the option to run generic disturbance scenarios of secondary forest types determined in f32_forest_shock.csv
f35_natveg added the option to run generic disturbance scenarios of primary forest determined in f35_forest_shock.csv
scripts added output script creating a merged .csv for dietaryIndicators and caloricSupply outputs
scripts added output script creating a merged .csv for dietaryIndicators and caloricSupply outputs
scripts added output script creating a set of outputs for Alessandro Passaro in the FSEC context
scripts added output script creating a set of outputs for Simon Dietz in the FSEC context
scripts added output script for gridded crop diversity indices
scripts added output script running MAGICC7 on a MAgPIE scenario
scripts added output script, FSDP_process creating a merged .csv and .gdx for dietaryIndicators and caloricSupply outputs
scripts added output scripts for FSEC FSDP runs
scripts added water output script for FSEC model runs

removed

15_food removed read-in of non-needed input file "f15_calib_factor_FAOfsupply_iso"
38_factor_costs removed mixed_reg_feb17 realization
50_nr_soil_budget old inconsistent module realizations
53_methane old inconsistent module realizations
56_ghg_policy old inconsistent module realizations
57_maccs old inconsistent module realizations

fixed

38_factor_costs fixed calibration of share parameter in sticky_labor realization
43_water_availability added missing years after 2100 in "f43_wat_avail" to avoid infeasibilities in coupled runs with less_ts timesteps
59_som corrected the som pool due to the carbon transfer from other and primary forest to secondary forest before optimization (presolve)
scripts fixed some bugs related to background execution of start/output scripts

4.5.0 - 2022-07-07

changed

09_drivers separation of GDP and population scenarios
09_drivers changed i09_gdp_pc_mer_iso to im_gdp_pc_mer_iso
11_costs Split of production costs per sector, addded new separated costs to the costs function.
13_tc changed vm_tech_cost upper bound to share of regional GDP PPP (s13_max_gdp_shr)
13_tc Replace endo_jan18 realization by endo_jan22. The new realization adds a new dimension to vm_tau separating crop from managed pastures tau.
15_food added more options to define convergence towards exogenous food intake and waste scenarios accounting for different transition periods
18_residues The variable that include production costs vm_cost_prod for residues changed to a new independent variable called vm_cost_prod_kres (specific to residues).
30_crop renamed switch s30_set_aside_shr, s30_set_aside_shr_noselect and c30_set_aside_target to s30_snv_shr, s30_snv_shr_noselect and c30_snv_target.
31_past The variable that include production costs vm_cost_prod for pasture changed to a new independent variable called vm_cost_prod_past (specific to past).
31_past added new realization implementing the separation of rangelands and managed pastures for the production of grass biomass.
32_forestry simplification and bugfix of afforestation limit. c32_max_aff_area_glo renamed to s32_max_aff_area_glo in default.cfg.
34_urban added set urban_scen34 and the switch c34_urban_scenario
35_natveg corrected naming of Frontier Forests (FF) to Intact Forest Landscapes (IFL) and changed input data for BH_IFL implementation.
35_natveg implementation of land protection moved to new module 22_land_conservation
38_factor_costs Sticky free/dynamic switch was removed and the realization was split into two realizations: the new per_ton_fao_may22 (free) and sticky_feb18 (dynamic). vm_cost_prod(i,kall) is now vm_cost_prod_crop(i,req) for crops factor costs. The results are now given differentiating between capital and labor for all realizations (new set req).
42_water_demand Added new input data on pumping costs for India, equation to calculate water costs and scalars for policy shocks
44_biodiversity Improved documentation, simplification of equations and flexible options for price on biodiversity loss
56_ghg_policy additional scenarios for c56_emis_policy
56_ghg_policy Deactivated GHG emission policies were not accounted for in the MACCs module. This has been corrected by an extension of the interface im_pollutant_prices, which now has an additional dimension for emission sources emis_source. In this context some equations in 56_ghg_policy have been simplified (sets: emis_source_reg, emis_source_cell). Also, GHG emissions from peatlands have been fully integrated into 56_ghg_policy.
70_livestock vm_cost_prod(i,kall) is now vm_cost_prod_livst(i,req) for livestock factor costs (req indicates differentiation between capital and labor) and vm_cost_prod_fish(i) for fish.
80_optimization Updated solver settings
config Update of regional and grid inputs from 4.68 to rev4.69, and additional files to 4.17. Removed free/dynamic sticky switch, and added scalars used in mixed_regional factor costs realization.
config added s13_max_gdp_shr setting for tech cost upper bound as share of GDP PPP
config included switch for non-agricultural water demand (s42_watdem_nonagr_scenario) in scenario_config.csv
config included SHAPE SDP scenarios in scenario_config.csv
config Update default tau realization from endo_jan18 to endo_jan22
config Added new SSP scenario switch for pasture suitability cfg$gms$c31_past_suit_scen
config Added new switch to limiting calibration to relative or absolute managed pastures yields: cfg$gms$s31_limit_calib.
inputs updated non-agricultural water use scenarios (watdem_nonagr_grper.cs3)
modules Moved interface vm_carbon_stock from 52_carbon to 56_ghg_policy
scripts replaced redundant files config.log and config.Rdata with a config.yml
scripts updated FSEC modeling start script and added FSEC calibration scripts
scripts clean up of the recalibrate_realizations.R script, project_LAMACLIMA_WP4.R, and sticky.R to remove sticky dynamic/free switch.
scripts bugfix in disaggregation.R, disaggregation_BII.R with respect to urban scenario
scripts added FSEC modeling start script (global runs)
scripts The disaggregation_LUH2.R was extended to include the changes used to generate ISIMIP3b maps for LUH harmonization. The largest changes are: 1) The convertLUH function now breaks the grid level magpie objects by groups of years, then creates the raster for the groups and aggregates them to create the final map at a quarter of a degree resolution (this speeds up the process). 2) The mapping between LUH and MAgPIE is now defined by country and magpie-LUH types (not 1 to 1 anymore). 3) The split of MAgPIE's pasture land type between pasture and rangeland changed. Rangeland is assumed to stay constant after 2015, and changes in MAgPIE's pasture are due to managed pasture. 4) IFs were added so if a certain map already exists in the output folder, it will not generate it once again. 5) Flooded land now corresponds to a share of rice cropland, based on historical values. 6) To speed calculations, yields are read at the cell level, the crops are aggregated based on the new MAgPIE-LUH mapping, and then disaggregated to grid level.
scripts added new disaggregation script to provide grid cell level BII
scripts removed test script "irrig_dep_test" from "start" folder to "extra" folder
scripts Added script projects/paper_grassland.R
scripts scripts/output/extra/emulator.R Remove dependency on deprecated R package "magpie"

added

core macros for linear and sigmoidal time interpolation
22_land_conservation added new module and realisation for land conservation. The realisation also includes a new WDPA initialisation data set (from 1995 to 2020) for protected areas under legal protection, meeting IUCN and CBD protected area definitions. The module also adds the interface pm_land_conservation.
30_crop new module realizations including crop rotation scenarios by strict constraints (rotation_apr22) and by penalties (penalty_apr22)
36_employment added new module to calculate agricultural employment. Includes one realization (exo_may22) in which employment is calculated based on the total labor costs (for crop and livestock production)
38_factor_costs mixed_reg_feb17 realization added. This realization includes differences in productions costs between irrigated and rainfed crops, with the option of regional differentiation as well. per_ton_fao_may22 realization added. This realization corresponds to the old sticky_feb18 free.
38_factor_costs added switch c38_fac_req to choose between global and regional crop factor requirements. The default is "glo" (which corresponds to the previous implementation)
44_biodiversity added new realization bii_target, which calculates the BII at the level of 71 biomes and allows to set targets for BII (e.g. no decrease in the future)
52_carbon added land carbon sink adjustment factors, needed in R post-processing
70_livestock added switch c70_fac_req_regr to choose between global and regionally calibrated regression to calculate livestock factor requirements. The default is "glo" (which corresponds to the previous implementation)
config added option for CO2 emission pricing cfg$gms$c56_carbon_stock_pricing
config added cfg$gms$s70_past_mngmnt_factor_fix with default 2005 (previous default was 2010). The previous setting caused a strong spike in CO2 emissions from pasture expansion in SSA. With 2005, this can be avoided.
inputs New input files added: f13_pastr_tau_hist.csv -> historical tau for managed pastures. f31_pastr_suitability.cs3 -> Managed pasture suitability f31_LUH2v2.cs3 -> LUH2v2 land classes separating rangelands from managed pastures f31_grassl_yld.cs3 -> Rangelands and managed pastures grass yields f31_grass_bio_hist.cs3 -> Historical grass biomass demand
modules New dimension in vm_carbon_stock for different carbon stock types (actual, previousLandPattern, previousCarbonDensity)
scripts output/projects/FSEC_StevenLord.R to create output for Steven Lord in the FSEC context
scripts output/projects/FSEC_costs.R to create costs ouput for the FSEC project
scripts output/projects/FSEC_dietaryIndicators.R to create output datasets for the FSEC project
scripts output/projects/FSEC_nitrogenPollution.R to create output datasets of nitrogen pollutants for the FSEC project
scripts Extended dissagregation.R script to replace single "past" land class by LHU range and pastr classes when grassland_apr22 realization is used.
scripts start/projects/test_rotations.R testscript for different rotation scenario settings

removed

38_factor_costs mixed_feb17 and fixed_per_ton_mar18 realizations removed because they are not being used at the moment.

fixed

09_drivers bugfix concerning the use of the switch c09_gdp_scenario for defining population assumptions
09_drivers introduced new sets for PAL and demography scenarios to account for only partial coverage of available socio-economic gdp and population scenarios
18_residues off realization; missing variable declarations
34_urban exo_nov21 realization; bugfix in calculation of biodiversity value
41_area_equipped_for_irrigation static realization. bugfix in presolve.gms: f41_irrig_luh("y1995",j)
44_biodiversity fixed accounting for time step length in realization bv_btc_mar21
50_nr_soil_budget off realization; missing variable declarations
56_ghg_policy Some equations in 56_ghg_policy have been simplified. Also, GHG emissions from peatlands have been fully integrated into 56_ghg_policy.
56_ghg_policy and config removed switch s56_reward_neg_emis
59_som static realization; avoid division by zero
62_material exo_flexreg_apr16 realization; avoid division by zero
80_optimization nlp_par realization; bugfix i2 in submission loop
inputs included data for Sudan
scripts calibration; set NA values to 1
scripts fixed misleading warning in check_config
scripts fixed configuration error in FSEC output scripts, FSEC_dietaryIndicators.R and FSEC_environmentalPollutants.R
scripts scripts/start/extra/emulator.R Throw an error if no file can be found to take the GHG prices from

4.4.0 - 2021-12-13

changed

additional_data NDCs for Chinas afforestation now start earlier (1995) in line with observed afforestation.
config comments added for correct use of nitrogen switches
inputs new default LPJmL version with growing season adaptation (gsadapt) on
51_nitrogen parameter change in rescaled_jan21, now including regionalized climate-dependent leaching factors
config Update default configuration to new input data (especially cellular inputs) including all module realization updates (14_yield, 22_processing, 30_crop, 38_factor_costs, 39_landconversion). Moreover, climate impatcs (cc options for biophysical inputs) are activiated as default. New best_calib calibration routine is activated as default.
config peatland module on by default (cfg$gms$peatland <- "on")
config update default setting for 2nd generation bioenergy demand and GHG prices
config update default setting for the 42_water_demand module (to all_sectors_aug13)
scripts output/extra/disaggregation.R updated to account for country-specific set-aside shares in post-processing
scripts output/extra/disaggregation.R updated to account for sub-categories of "forestry"
scripts Default recalibration routine does not read in previous calibration factors anymore
09_drivers Update sets in drivers to include new SDP and Ariadne GDP and Pop scenarios
21_trade In the exo and off realization, equations corrected to be consistent with the mapping between supreg h and regions i. Bugfixes in trade exo and off realizations. Added scaling factor for exo realization.
inputs Update of GDP and population scenarios based upon recent historic data from WDI (complemented with growth rates given by the James2019 dataset), short term projections until 2025 from IMF (for GDPpc) and WB (for pop) and reconverge to the original SSP GDPpc levels by 2100.
inputs Update of all input data that are based on FAO, using the most up-to-date version of FAOSTAT datasets available at the date of input calculations via automated download.
inputs Update of additional data to rev4.07
scripts scripts/start/projects/project_LAMACLIMA.R -> scripts/start/projects/project_LAMACLIMA_WP4.R
58_peatland "On" realization: Degraded peatland is estimated differently, based on an additional calibration factor.
43_water_availability changed scaling factor
10_land Converted "v10_landreduction" to interface "vm_landreduction", used in "modules/39_landconversion/calib"
52_carbon Removed interface "vm_carbon_stock_change", no longer needed
scripts recalibrate_realizations.R and recalibrate.R adjusted for land conversion cost calibration + default time steps for convenient validation of results
scripts start_functions adjustments for land conversion cost calibration
scripts start.R added SLURM medium as choice
scripts yield calibration, "best" setting uses factors from iteration with lowest standard deviation
14_yield read-in file f14_yld_calib.csv if exists. Set default calibration factors to 1 in case f14_yld_calib.csv does not exist
13_tc different educated guess for vm_tau in 1995
scaling Update of scaling factors. removed duplicates
32_foresty Avoid division by zero (observed under higher regional resolutions)
35_natveg Avoid division by zero (observed under higher regional resolutions)
70_livestock Avoid division by zero (observed under higher regional resolutions)
60_bioenergy Minimum dedicated 2nd generation bioenergy demand assumed in each region raised from 0.01 to 1 mio. GJ per yr, and added as option in the config file (s60_2ndgen_bioenergy_dem_min)
config Remove elements from the parameter list of start_run(), instead include them as regular settings in the default.cfg.
scripts Add option to take ghg prices from different file than the regular reporting file (used in the REMIND coupling)
60_bioenergy Switch off fixing the bioenergy demand to SSP2 until 2020 if MAgPIE runs coupled (to REMIND) or for emulator runs (to derive biomass supply crurves).
56_ghg_policy Switch off fixing the GHG prices to SSP2 until 2020 if MAgPIE runs coupled (to REMIND) or for emulator runs (to derive biomass supply crurves).
scripts start/test_runs.R added SSP1, SSP2 and SSP5 as default test runs

added

34_urban New exo_nov21 exogenous realization of urban land expansion
21_trade Missing interface parameter for failing exo realization runs
59_som exogenous pathway for vm_nr_som via f59_som_exogenous
config Addition of a new scenario column (Tland) in scenario_config.csv
config Added option c32_max_aff_area, which allows to provide a file with regional limits for afforestation
14_yield parameter created to save historical cellular yields and to be used in the sticky realization of 38_factor_costs and in the 17_production module
17_production switch added to decide if initialization of cellular crop production is needed or not. Also, a parameter to calculate initial production based on input cellular crop patterns and semicalibrated yields (potential yields calibrated to FAO values).
scripts Added calibration script to generate default calibration for different factor costs realization
scripts scripts/output/extra/disaggregation_LUH2.R script for exporting spatial output in LUH2 format (NetCDF)
37_labor_prod labor productivity module with two realizations: off and exo
38_factor_costs new realization "sticky_labor", based on "sticky_feb18" but accounting for changes in labor productivity
15_food Added additional solve with CONOPT3 in case of modelstat 7
scripts Added script "landconversion_cost.R" for land conversion cost calibration in scripts/calibration, for matching historic cropland in 2015
39_landconversion_cost added new realization "calib", which uses the calibration factors derived by "landconversion_cost.R"
scripts Added start script for yield and land conversion cost calibration "recalibrate_all.R"
scripts added script validation_short.R with aggregated crop types (cutting the PDF size in half) -> replaces validation.R in default.cfg
scripts added start script "scripts/start/Rprofile.R" for adding a R snapshot to the ".Rprofile" file
config file "land_carbon_sink_adjust_grassi.mz" added to cfg$files2export$start
config Inclusion of LAMACLIMA scenarios in scenario_config.csv
output.R added SLURM standby maxMem and SLURM priority maxMem; needed for some output scripts (e.g. disaggregation_LUH2.R)

removed

32_foresty Removed static realization
35_natveg Removed static realization
scripts lpjml_addon script is removed and all calls within dependend starting scripts
scripts output/extra/disaggregation_transitions_.R moved to deprecated folder
scripts output/extra/disaggregation_cropsplit.R moved to deprecated folder
14_yield Removed biocorrect and dynamic_aug18 realizations
20_processing Removed substitution_dec18 realization
30_crop Removed endo_jun13 realization
scripts scripts/start/extra/highres.R
39_landconversion_cost removed realizations "global_static_aug18" and "devstate"

fixed

80_optimization Improved solve logic in "nlp_apr17" and "nlp_par" realization, multiple bugfixes and switch to solvelink=3 in "nlp_par"
58_peatland fixed rare infeasibility in "on" realization
10_land fixed rare infeasibility in "landmatrix_dec18" realization
38_factor_costs For the sticky_feb18 realization correction in initial capital stocks, use of production initial values, and 05USDppp units changed to 05USDMER for sticky so it matches the units of the other realizations
80_optimization Bug fixes in the nlp_par (parallel optimization) and improved code to collect failing handles.
32_foresty Avoid division by zero in q32_establishment_dynamic_yield
35_natveg fixed land protection to SSP2 default (WDPA) for historic period
15_food New iteration needs to be started before setting food prices for curr_iter15
scripts scripts/output/extra/highres.R bugfixes
38_factor_costs units in sticky_feb18
32_foresty Global afforestation limit s32_max_aff_area was not effective in case of parallel optimization -> added option c32_max_aff_area, which allows to provide a file with regional limits for afforestation;
73_timber plausible cost for balance variable in case of s73_timber_demand_switch = 0 to avoid cost distortion
56_ghg_policy choose the correct scenario for fixing the GHG prices until sm_fix_SSP2

4.3.5 - 2021-09-02

changed

13_tc added switch to ignore historic tau patterns in historic time steps (new default)
16_demand Moved most of cropping related set definitions (k, kve, kcr) from 16_demand to 14_yield
32_foresty Added option to choose a rotation length calculation criteria
35_natveg Calculation of land protection policies revised and moved from presolve.gms to preloop.gms
38_factor_costs Realization sticky_feb18 extended to differentiate capital requirements between regions and their specific development status (GDP) in each time step of the magpie run. The changes in the sticky realization also include an additional switch so it can be operated as dynamic (change of each region capital share at each time step) or free (capital shares equal to zero and equivalent to the fixed_per_ton_mar18 realization). Bugfix in the yearly update of the variable input requirements. Addition of the time dimension and clean up of names of parameters used in the realization. Removal of the management factor (this factor was not being used, it was being cancelled out in previous calculations). Correction of the costs, they are given in 05USDppp.
39_landconversion lower costs for expansion of forestry land
58_peatland Peatland area is initialized in 1995 based on levels for the year 2015, and hold fixed depending on s58_fix_peatland. This provides a better proxy for peatland area and associated GHG emissions for the historic period, which where assumed zero in previous versions.
80_optimization nlp_par parallelizes now on superregional level h instead of regional level i as before.
script Added forestry run script which used LPJmL addon
script New standard for cluster to region mapping (rds-files) is used in all scripts. If old spam files are provided by input data, rds-mapping file is created.
script updated test run script. Update of the sticky run script.
start scripts improved function for GAMS set creation from R and outsourced it to package gms
inputs Changed file format from cs2 to cs2b for cellular input files with a single data column
scenario_config added RCPs as columns for use with setSceanrio function. This required the addition of "gms$" in the 1st column.

added

73_timber Added construction wood demand scenarios based on Churkina et al. 2020
script(s) Added scripts to replicate runs for Mishra et al. 2021 (in review : https://doi.org/10.5194/gmd-2021-76)
13_tc Added new interfaces for tau factor of the previous time step (pcm_tau)
14_yield Added new realization managementcalib_aug19 that is able to calibrate yield data coming from uncalibrated crop models (e.g. LPJmL yields for unlimited N supply). The yield calibration is either a purely multipicative factor or is limited to additive change in case of a underestimated FAO yield by the initial crop model yields (based on the switch s14_limit_calib). For pastures spillover of crop yield increases due to technological change from the previous time step are allowed and can be scaled using s14_yld_past_switch.
20_processing Added new almost identical realization that excludes a calibration of the oil crop demand for oils (Note: old realization can be removed, when old yield realizations are deleted).
30_crop Added new realization endo_apr21. The realisation includes new input data for available cropland and a new switch c30_marginal_land, which provides different options for including marginal land as cropland. Furthermore, a given share of the available cropland can be set aside for the provisioning of natures contribution to people and to promote biodiversity. The new switches s30_set_aside_shr and c30_set_aside_target are included to specify the share that should be set aside and the target year.
30_crop Added new interface parameter historic croparea (fm_croparea)
30_crop Added new option policy_countries30 for country specific set aside share
35_natveg Added new option "FF+BH" for protected areas.
35_natveg Added new option policy_countries35 for country specific land protection
38_factor_costs Added scaling factors for improving model run time
39_landconversion new realization devstate in which global land conversion costs are scaled with regional development state (0-1)
41_area_equipped_for_irrigation Added switch for using different input data including new LUH2v2 consistent initialisation pattern.
41_area_equipped_for_irrigation Added scalar for depreciation rate that depreciates certain area in every timestep, defined by switch in config.
58_peatland Added option for one-time and recurring costs of peatland degradation (USD05MER per ha)
calibration run has two new features: 1. Upper bound to cropland factor can be added (crop_calib_max). 2. Best calibration factor (factor with the lowest divergence) can be picked individually for each regions based on all calibration factors calculated during the calibration run iteration (best_calib).
disaggregation Added new disaggregation script that is in line with new crop realisation and can account for cropland availabilty on grid level during disaggregation (see interpolateAvlCroplandWeighted() in package luscale for further details).
sets added superregional layer h as additional spatial layer and moved constraints in 13_tc and 21_trade partly to the superregional level.

removed

13_tc Removed disfuctional setting c13_tccost = "mixed"
core removed sets ac_young and ac_mature (no longer needed due to changes in 44_biodiversity)

fixed

32_foresty BII coefficients for CO2 price driven afforestation
32_foresty growth curve CO2 price driven afforestation
32_foresty NPI/NDC afforestation infeasibility
32_foresty Correct distribution from LUH data to plantations and ndcs
35_natveg option to fade out damage from shifting agriculture by 2030
44_biodiversity ac0 included in pricing of biodiversity loss

4.3.4 - 2021-04-30

changed

51_nitrogen New calculations for emissions from agricultural residues (vm_res_ag_burn)
53_methane New calculations for emissions from agricultural residues (vm_res_ag_burn)
citation file added new contributors

added

config The set "kfo_rd" (livst_rum, livst_milk), which is used in the food substitution scenarios c15_rumdairy_scp_scen and c15_rumdairyscen, has been added to the default.cfg file. This allows for sensitivity scenarios (e.g. only livst_milk or only livst_rum).
A new scenario (nocc_hist) was added to the cc/nocc switch. In this scenario, parameters affected by the cc/nocc switch in 14_yields,42_water_demand,43_water_availability,52_carbon,59_som keep their historical/variable values up to the year defined by sm_fix_cc. Afterwards, sm_fix_cc values are kept constant for the overall run horizon.

fixed

09_drivers migration of sm_fix_SSP2 and sm_fix_cc declaration from the core declarations to the drivers module. This will allow to set the scalars properly .
- 15_food single-cell protein substitution scenarios included in intersolve.gms.
20_processing The "mixed" scenario for single-cell protein production (c20_scp_type) was not working as expected. The corresponding code in 20_processing has been updated.

4.3.3 - 2021-03-30

added

15_food* added 3 sigmoid food substitution scenarios
44_biodiversity New biodiversity module. The realization bv_btc_mar21 now allows to calculate an area-based biodiversity value across all land types. Switch c44_price_bv_loss to implement cost for biodiversity loss.
56_ghg_policy Automatic sets for scenarios
60_bioenergy Automatic sets for scenarios
70_livestock* added 3 sigmoid feed substitution scenarios
scripts added output script for disaggregation to GAINS regions
scripts Automatic sets for 56_ghg_policy and 60_bioenergy
scripts Added pre-commit hook

fixed

60_bioenergy Minimal bioenergy demand

4.3.2 - 2021-03-17

changed

12_interest_rate Interest fader changed to csv
15_food better documentation of parameters over model iterations
15_food added scenario switch for ruminant and dairy replacement by Single-Cell Protein
20_processing added different options for Single-Cell Protein production
35_natveg Fader for HalfEarth protection policy
50_nr_soil_budget added necessary interfaces to 50_nitrogen module
70_livestock added scenario switch for feed replacement (crop and forage) by Single-Cell Protein
scripts Updated AgMIP output scripts.
runscripts adapted to new input data and model version
tests Replaced TravisCI with GithubActions

added

15_food Added the option to fade out livestock demand towards a target level in kcal/cap/day.
21_trade Added scalar s21_trade_bal_damper and new set k_trade_excl_timber
29_ageclass New age-class module
32_forestry added new default realization
32_forestry Simplified routine for plantation establishments. Added plantation area initialization based on MODIS data. Calibration to FAO growing stocks via carbon densities. New switches: s32_distribution_type , s32_hvarea, s32_establishment_dynamic, s32_establishment_static, s32_max_self_suff. New settings c32_dev_scen, c32_incr_rate, c32_incr_rate
35_natveg Added new default realization
35_natveg Added distribution in secondary forest based on Poulter et al. 2019. Added forest damages due to wildfire and shifting agriculture. Bugfix in forest protection calculations. New switches: s35_secdf_distribution, s35_forest_damage, s35_hvarea
35_natveg Added HalfEarth scenario to protection scenarios
51_nitrogen new module realization rescaled_jan21, which rescales n-related emissions with nitrogen surplus to account for lower emissions with higher NUE
52_carbon Simplified routine for carbon stock calculations in timber plantations and cleanup of unused code.
56_ghg_policy Added new scenario to emission policy
73_timber Additive calibration with FAO data for roundwood demand. New switches: c73_wood_scen
73_timber Added new realization default (modified version of previous realization)
default.cfg New forestry scenario which simulates timber production in MAgPIE
scenario.csv Added three plantation scenarios
scaling Updated scaling across the modules
scripts Updated to forestry script with general cleanup for publication. Added forestry_magpie script for generic forestry runs.
scripts added output script for disaggregation of land transitions

removed

32_forestry Removed previous default realization
35_natveg Removed previous default realization
73_timber Removed previous default realization

fixed

32_forestry Bugfixes for "ac_est" and carbon treshold afforestation; removed plantations from "vm_cdr_aff".
core bugfix m_fillmissingyears macro; was running over t before; now running over t_all_

4.3.1 - 2020-11-03

added

main Added Dockerfile for running MAgPIE in a container

fixed

35_natveg Bugfix "v35_secdforest_expansion"
52_carbon Bugfix "p52_scaling_factor" for climate change runs
73_timber New scenario switch c73_wood_scen.

4.3.0 - 2020-09-15

added

38_factor_costs Added the new "sticky" realization to the factor costs module. The realization "sticky_feb18" favors expansion in cells with preexisting farmland and capital based on capital investment decisions.
modules added endogenous implementation of local biophysical (bph) impacts of afforestation to existing realizations in modules 32_forestry (dynamic_oct19) and 56_ghg_policy (price_jan20). default = off
73_timber Added timber module which brings the ability of producing woody biomass for timber plantations and natural vegetation. Default = off. New switch: s73_foresight. New scalars : s73_timber_prod_cost, s73_timber_harvest_cost,s73_cost_multiplier,s73_free_prod_cost
32_forestry New realization dynamic_may20 for forestry land use dynamics. This builds up on previous forestry realization for afforestation. New switches: s32_fix_plant, c32_interest_rate. New scalars : s32_plant_share, s32_forestry_int_rate, s32_investment_cost, s52_plantation_threshold.
35_natveg New realization dynamic_may20 for natural vegetation land use dynamics. New forest protection scenario.
52_carbon Added interface which is used for calculating additional investment needed in plantations when carbon stocks are lower than a specified threshold. New scalar: s52_plantation_threshold.
57_maccs Added MACCs from Harmsen PBL 2019
15_food Added the option to include calories from alcohol consumption in healthy and sustainable EAT-Lancet diets.
scripts added start script for making timber production runs (forestry.R).

changed

scripts updated selection routine for start and output scripts
scripts replaced lucode dependency with newer packages lucode2 and gms
32_forestry include new datasets of the bph effect of afforestation / replaced the bph ageclass switch with a fade-in between ac10 and ac30 in (dynamic_may20)
13_tc, 39_landconversion, 41_area_equipped_for_irrigation and 58_peatland. For the current time step, the optimization costs only include now the annuity of the present investment. magpie4's reportCosts() function was modified to consider these changes.

removed

scripts deleted outdated start and output scripts

fixed

32_forestry Rotation length calculation based on correct marginals of growth function in timber plantations. Clearer calculations for harvested area for timber production.
35_natveg Clearer calculations for harvested area for timber production.
52_carbon Fix to the Carbon densities received from LPJmL for timber plantations.

4.2.1 - 2020-05-15

added

modules added option of regional scenario switches in modules 12_interest_rate, 15_food, 42_water_demand, 50_nr_soil_budget, 55_awms, 56_ghg_policy, 60_bioenergy
58_peatland added peatland module. Two realizations: off (=default) and on.
80_optimization added realization for parallel optimization of regions in combination with fixed trade patterns.
metadata added .zenodo.json metadata file for proper metadata information in ZENODO releases

changed

12_interest_rate merged the two realizations (glo_jan16 and reg_feb18) into one (select_apr20) with same functionality and add on of option to choose different interest rate scenarios for different regions selected via country switch select_countries12
scripts streamlined and improved performance of NPI/NDC preprocessing

fixed

56_ghg_policy and 60_bioenergy update of GHG prices and 2nd generation bioenergy demand from SSPDB to most recent snapshot
NPI/NDC policy calculations revision of calculation method

4.2.0 - 2020-04-15

This release version is focussed on consistency between the MAgPIE setup and the REMIND model and result of a validation exercise of the coupled (REMIND 2.1)-(MAgPIE 4.2) system.

added

config Added new socioeconomic scenario (SDP) to scenario_config.csv (which include all switches to define among others the SSP scenarios). For the parametrization of the new SDP (Sustainable Development Pathway) scenario, the list of scenario switches was extended to account for a broad range of sustainability dimensions.
10_land added new land realization landmatrix_dec18 to directly track land transition between land use types
15_food stronger ruminant fade out in India
15_food Added exogenous food substitution scenarios that can be selected via settings in the config-file, defining speed of convergence, scenario targets and transition periods (applied after the food demand model is executed). Among these scenarios are the substitution of livestock products with plant-based food commodities and the substitution of beef or fish with poultry. The food substitution scenarios are based on the model-native, regression-based calculation of food intake and demand.
15_food Added exogenous EAT Lancet diet scenarios: It is now possible to define in the config-file exogenous diet scenarios that replace the regression-based calculation of food intake and demand. Possible settings are the target for total calorie intake (e.g. according to a healthy BMI) and variants of the EAT Lancet diet (e.g. in addition to the flexitarian a vegetarian or vegan variant).
15_food Added exogenous food waste scenarios which can be defined via settings in the config-file, including scenario targets for the ratio between food demand and intake and the year in which full transition to the target should be achieved.
30_crop added crop specific land use initialization pattern (used as interface for other modules)
50_nr_soil_budget and 55_awms Additional inputs for the GoodPractice Scenario.
52_carbon Added new forest growth curve parameters based on Braakhekke et al. 2019. Growth curves are now differentiated between natural vegetation (default) and plantations.
59_som added new realization static_jan19 (new default) including all soil carbon related calculations. Before all carbon pools were updated in the specific land use type modules. This still holds true for the above ground pools (vegetation and litter carbon)
.gitattributes file added to set line ending handling to auto for all text files
scaling added scaling.gms files for several modules to improve optimization (based on gdx::calc_scaling)
scripts added output scripts for global soil carbon maps (SoilMaps.R).

changed

config new default ghg emission pricing policy "redd+_nosoil" in c56_emis_policy. Includes all pools included in the previous default "SSP_nosoil", and in addition "forestry".
13_tau lower bound for vm_tau for historical time steps
50_nr_soil_budget atmospheric deposition is now estimated on the cluster-level instead of the region level to improve spatial patterns.
56_ghg_policy updated scenarios in f56_emis_policy: none, all natural (called 'ssp') and all land use change emissions (pure co2) being included in greenhouse gas pricing. ssp and all also featuring additional scenarios excluding soil carbon pricing (marked with '_nosoil' postscript).
56_ghg_policy Several changes regarding afforestation: use of detailed formula for incentive calculation instead of simplified Hotelling formula, 50 year planning horizon (instead of 80 years), phase-in of GHG prices deactivated by default (now done in REMIND), CO2 price reduction factor deactivated by default, introduced buffer reduction factor of 20% for afforestation.
59_som updated cellpool_aug16 realization to use new interfaces from land module on land use type specific land expansion and reduction as well as crop type specific land initialization pattern. Additionally added irrigation as stock change factor sub-type. N fertilizer from soil organic matter decomposition is truncated after threshold to avoid unrealistically high fertilization rates.
80_optimization write extended run information in list file in the case that the final solution is infeasible
modules modular structure updated from version 1 to version 2
line endings changed to unix-style for all text files

fixed

modules Fixing of all parameters to SSP2 values until 2020 (switch sm_fix_SSP2) for having identical outcomes in all scenarios (SDP, SSP1-5) until 2020.
21_trade Bugfix kall instead of k in exo realization; Bufix begr/betr trade in default realization; Bugfix sets in free realization
32_forestry NPI/NDC afforestation targets are now counted towards the global afforestation limit, which can be set for specific scenarios via the switch s32maxaff_area and constrains the potential for carbon-price induced endogenous afforestation.
56_ghg_policy bugfix full soil carbon loss in default setting, renamed it from ssp to ssp_nosoil, indicating, that soil carbon losses are not priced.
56_ghg_policy bugfix afforestation: vmbtm_cell was a free variable for some sources and pollutants, which could result in GHG cost neutral shifting of age classes to ac0 (e.g. from ac55 to ac0).
80_optimization added fallback routine for CONOPT4 failure (fatal system error)

4.1.1 - 2020-03-09

This version provides the model version used for the publication starved, stuffed and wasteful. It provides a few technical updates compared to the 4.1 release, which include

added

scripts a startscript that allows the exchange of model parameters as a sensitivity analysis

changed

core allow for flexible calibration period of the model, which allows for uncalibrated runs of the past for validation purposes
15_food Parameters for bodyheight regressions were included explicitly as input parameters
config updated input data of the drivers and food demand regressions

fixed

15_food Precision of iteration convergence criterium for magpie-demandmodel-iteration is calculated more precisely, avoiding unnecessary iterations.

4.1.0 - 2019-05-02

This release version is focussed on consistency between the MAgPIE setup and the REMIND model and result of a validation exercise of the coupled REMIND-MAgPIE system.

added

80_optimization added support for GAMS version 26.x.x
scripts added new start and output scripts
license added exception to the applied AGPL license to clarify handling of required GAMS environment, solver libraries and R libraries

changed

56_ghg_policy apply reduction factor on CO2 price to account for potential negative side effects; lowers the economic incentive for CO2 emission reduction (avoided deforestation) and afforestation
56_ghg_policy non-linar phase-in of GHG prices over 20 year period
56_ghg_policy multiply GHG prices with development state to account for institutional requirements needed for implementing a GHG pricing scheme
40_transport introduced transport costs for monogastric livestock products
NPI/NDC scripts added forest protection policy for Brazilian Atlantic Forest in default NDC and NPI scenarios
NPI/NDC scripts harmonized the starting year of the NDC policies 2020.
interpolation scripts changed output files to seven magpie land use types, added additional cropsplit script for more detailed cropland output
15_food clean-up and cosmetic changes (correction of comments, parameter names, structure of code); update BMI share calculations with the values of the last consistent MAgPIE/food-demand-model iteration

fixed

42_water_demand bugfix environmental flow policy harmonization for historic period
57_maccs correction of cost calculation; Conversion from USD per ton C to USD per ton N and USD per ton CH4 was missing.
71_diagg_lvst adjusted monogastric disaggregation for more flexiblity to avoid infeasibilities with EFPs (see 42_water_demand)
15_food correction regarding the convergence measure of the iterative execution of the food demand model and MAgPIE; correction accounting for unusual time step length in body height calculations; body height regression parameters updated

4.0.1 - 2018-10-05

fixed

FABLE adapted FABLE-specific configuration so that it works with MAgPIE 4.0

4.0.0 - 2018-10-04

First open source release of the framework. See MAgPIE 4.0 paper for more information.

Files

CHANGELOG.md

Latest commit

History

CHANGELOG.md

File metadata and controls

Changelog

4.8.1 - 2024-06-19

changed

added

removed

fixed

4.8.0 - 2024-06-10

changed

added

removed

fixed

4.7.3 - 2024-04-12

changed

added

fixed

4.7.2 - 2024-04-02

changed

added

removed

fixed

4.7.1 - 2024-02-28

changed

added

removed

fixed

4.7.0 - 2023-12-11

changed

added

fixed

4.6.11 - 2023-09-05

changed

fixed

4.6.10 - 2023-08-16

changed

fixed

4.6.9 - 2023-07-27

fixed

4.6.8 - 2023-07-17

changed

added

removed

fixed

4.6.7 - 2023-05-10

changed

added

4.6.6 - 2023-05-10

changed

4.6.5 - 2023-03-29

changed

added

removed

fixed

4.6.4 - 2023-02-22

changed

added

removed

fixed

4.6.3 - 2023-01-19

changed

added

fixed

4.6.2 - 2023-01-12

changed

added

4.6.1 - 2022-12-13

changed

added

removed

fixed

4.6.0 - 2022-11-09

changed

added

removed

fixed