All parts in the STLs folder need to be printed, with the exception that some parts have multiple variants (for different bowden tube collet types) and you only need 1 variant of each of these parts:
The following bowden tube collet types are supported:
- "5mm collet" (E3D V6, Bondtech LGX)
- "6mm collet" (UM2)
- ECAS04
The filename of each variant of the slider and sensor_housing STLs will contain
either (5mm_collet), (6mm_collet), or (ecas04) to indicate the collet type
it is meant for.
"5mm" and "6mm" refer to the approximate diameter of the part of the collet that the collet clip goes around, highlighted in blue below:
If using the 5mm or 6mm collet options, a collet clip should be used to prevent the bowden tube from moving. A collet clip is unnecessary if using the ECAS04 option.