Camera works, but usb resets every image?

[stevetim]

Allsky Settings for ZWO ASI290MC

Version: v2023.05.01_04
Pi Revision Raspberry Pi 5 Model B Rev 1.0 (8 GB)
Uptime 16 minutes
SD Card 467.89 GB (434.39 GB free)
All bars green.

Do we have a driver issue? We can verify for a fact power is good. As a matter of fact you can see power meters at our remote website:
https://memphisastro.org/allsky/

Getting this error at every exposure:
[10799.189249] usb 3-2: reset high-speed USB device number 3 using xhci-hcd
[10802.893309] usb 3-2: reset high-speed USB device number 3 using xhci-hcd
[10806.589398] usb 3-2: reset high-speed USB device number 3 using xhci-hcd
[10810.293475] usb 3-2: reset high-speed USB device number 3 using xhci-hcd
[10813.989550] usb 3-2: reset high-speed USB device number 3 using xhci-hcd
[10817.685659] usb 3-2: reset high-speed USB device number 3 using xhci-hcd
[10821.385710] usb 3-2: reset high-speed USB device number 3 using xhci-hcd
[10825.085787] usb 3-2: reset high-speed USB device number 3 using xhci-hcd

Images are drawing fine, but we wonder about this error in dmesg

[EricClaeys]

Steve,

You can ignore that message. The ZWO library causes that message every time a picture is taken.

Eric